//----------------------------------------------------------------------------- // Copyright (C) Proxmark3 contributors. See AUTHORS.md for details. // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // See LICENSE.txt for the text of the license. //----------------------------------------------------------------------------- // Low frequency EM4x70 commands //----------------------------------------------------------------------------- #include "fpgaloader.h" #include "ticks.h" #include "dbprint.h" #include "lfadc.h" #include "commonutil.h" #include "optimized_cipherutils.h" #include "em4x70.h" #include "appmain.h" // tear static em4x70_tag_t tag = { 0 }; // EM4170 requires a parity bit on commands, other variants do not. static bool command_parity = true; // Conversion from Ticks to RF periods // 1 us = 1.5 ticks // 1RF Period = 8us = 12 Ticks #define TICKS_PER_FC 12 // Chip timing from datasheet // Converted into Ticks for timing functions #define EM4X70_T_TAG_QUARTER_PERIOD (8 * TICKS_PER_FC) #define EM4X70_T_TAG_HALF_PERIOD (16 * TICKS_PER_FC) #define EM4X70_T_TAG_THREE_QUARTER_PERIOD (24 * TICKS_PER_FC) #define EM4X70_T_TAG_FULL_PERIOD (32 * TICKS_PER_FC) // 1 Bit Period #define EM4X70_T_TAG_TWA (128 * TICKS_PER_FC) // Write Access Time #define EM4X70_T_TAG_DIV (224 * TICKS_PER_FC) // Divergency Time #define EM4X70_T_TAG_AUTH (4224 * TICKS_PER_FC) // Authentication Time #define EM4X70_T_TAG_WEE (3072 * TICKS_PER_FC) // EEPROM write Time #define EM4X70_T_TAG_TWALB (672 * TICKS_PER_FC) // Write Access Time of Lock Bits #define EM4X70_T_TAG_BITMOD (4 * TICKS_PER_FC) // Initial time to stop modulation when sending 0 #define EM4X70_T_TAG_TOLERANCE (8 * TICKS_PER_FC) // Tolerance in RF periods for receive/LIW #define EM4X70_T_TAG_TIMEOUT (4 * EM4X70_T_TAG_FULL_PERIOD) // Timeout if we ever get a pulse longer than this #define EM4X70_T_WAITING_FOR_LIW 50 // Pulses to wait for listen window #define EM4X70_T_READ_HEADER_LEN 16 // Read header length (16 bit periods) #define EM4X70_COMMAND_RETRIES 5 // Attempts to send/read command #define EM4X70_MAX_RECEIVE_LENGTH 96 // Maximum bits to expect from any command /** * These IDs are from the EM4170 datasheet * Some versions of the chip require a * (even) parity bit, others do not */ #define EM4X70_COMMAND_ID 0x01 #define EM4X70_COMMAND_UM1 0x02 #define EM4X70_COMMAND_AUTH 0x03 #define EM4X70_COMMAND_PIN 0x04 #define EM4X70_COMMAND_WRITE 0x05 #define EM4X70_COMMAND_UM2 0x07 // Constants used to determine high/low state of signal #define EM4X70_NOISE_THRESHOLD 13 // May depend on noise in environment #define HIGH_SIGNAL_THRESHOLD (127 + EM4X70_NOISE_THRESHOLD) #define LOW_SIGNAL_THRESHOLD (127 - EM4X70_NOISE_THRESHOLD) #define IS_HIGH(sample) (sample > LOW_SIGNAL_THRESHOLD ? true : false) #define IS_LOW(sample) (sample < HIGH_SIGNAL_THRESHOLD ? true : false) // Timing related macros #define IS_TIMEOUT(timeout_ticks) (GetTicks() > timeout_ticks) #define TICKS_ELAPSED(start_ticks) (GetTicks() - start_ticks) static uint8_t bits2byte(const uint8_t *bits, int length); static void bits2bytes(const uint8_t *bits, int length, uint8_t *out); static int em4x70_receive(uint8_t *bits, size_t length); static bool find_listen_window(bool command); static void init_tag(void) { memset(tag.data, 0x00, sizeof(tag.data)); } static void em4x70_setup_read(void) { FpgaDownloadAndGo(FPGA_BITSTREAM_LF); FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_ADC | FPGA_LF_ADC_READER_FIELD); // 50ms for the resonant antenna to settle. SpinDelay(50); // Now set up the SSC to get the ADC samples that are now streaming at us. FpgaSetupSsc(FPGA_MAJOR_MODE_LF_READER); FpgaSendCommand(FPGA_CMD_SET_DIVISOR, LF_DIVISOR_125); // Connect the A/D to the peak-detected low-frequency path. SetAdcMuxFor(GPIO_MUXSEL_LOPKD); // Steal this pin from the SSP (SPI communication channel with fpga) and // use it to control the modulation AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT; AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT; // Disable modulation at default, which means enable the field LOW(GPIO_SSC_DOUT); // Start the timer StartTicks(); // Watchdog hit WDT_HIT(); } static bool get_signalproperties(void) { // Simple check to ensure we see a signal above the noise threshold uint32_t no_periods = 32; // wait until signal/noise > 1 (max. 32 periods) for (int i = 0; i < EM4X70_T_TAG_FULL_PERIOD * no_periods; i++) { // about 2 samples per bit period WaitTicks(EM4X70_T_TAG_HALF_PERIOD); if (AT91C_BASE_SSC->SSC_RHR > HIGH_SIGNAL_THRESHOLD) { return true; } } return false; } /** * get_falling_pulse_length * * Returns time between falling edge pulse in ticks */ static uint32_t get_falling_pulse_length(void) { uint32_t timeout = GetTicks() + EM4X70_T_TAG_TIMEOUT; while (IS_HIGH(AT91C_BASE_SSC->SSC_RHR) && !IS_TIMEOUT(timeout)); if (IS_TIMEOUT(timeout)) return 0; uint32_t start_ticks = GetTicks(); while (IS_LOW(AT91C_BASE_SSC->SSC_RHR) && !IS_TIMEOUT(timeout)); if (IS_TIMEOUT(timeout)) return 0; while (IS_HIGH(AT91C_BASE_SSC->SSC_RHR) && !IS_TIMEOUT(timeout)); if (IS_TIMEOUT(timeout)) return 0; return TICKS_ELAPSED(start_ticks); } /** * get_rising_pulse_length * * Returns time between rising edge pulse in ticks */ static uint32_t get_rising_pulse_length(void) { uint32_t timeout = GetTicks() + EM4X70_T_TAG_TIMEOUT; while (IS_LOW(AT91C_BASE_SSC->SSC_RHR) && !IS_TIMEOUT(timeout)); if (IS_TIMEOUT(timeout)) return 0; uint32_t start_ticks = GetTicks(); while (IS_HIGH(AT91C_BASE_SSC->SSC_RHR) && !IS_TIMEOUT(timeout)); if (IS_TIMEOUT(timeout)) return 0; while (IS_LOW(AT91C_BASE_SSC->SSC_RHR) && !IS_TIMEOUT(timeout)); if (IS_TIMEOUT(timeout)) return 0; return TICKS_ELAPSED(start_ticks); } static uint32_t get_pulse_length(edge_detection_t edge) { if (edge == RISING_EDGE) return get_rising_pulse_length(); else if (edge == FALLING_EDGE) return get_falling_pulse_length(); return 0; } static bool check_pulse_length(uint32_t pl, uint32_t length) { // check if pulse length corresponds to given length return ((pl >= (length - EM4X70_T_TAG_TOLERANCE)) && (pl <= (length + EM4X70_T_TAG_TOLERANCE))); } static void em4x70_send_bit(bool bit) { // send single bit according to EM4170 application note and datasheet uint32_t start_ticks = GetTicks(); if (bit == 0) { // disable modulation (drop the field) n cycles of carrier LOW(GPIO_SSC_DOUT); while (TICKS_ELAPSED(start_ticks) <= EM4X70_T_TAG_BITMOD); // enable modulation (activates the field) for remaining first // half of bit period HIGH(GPIO_SSC_DOUT); while (TICKS_ELAPSED(start_ticks) <= EM4X70_T_TAG_HALF_PERIOD); // disable modulation for second half of bit period LOW(GPIO_SSC_DOUT); while (TICKS_ELAPSED(start_ticks) <= EM4X70_T_TAG_FULL_PERIOD); } else { // bit = "1" means disable modulation for full bit period LOW(GPIO_SSC_DOUT); while (TICKS_ELAPSED(start_ticks) <= EM4X70_T_TAG_FULL_PERIOD); } } /** * em4x70_send_nibble * * sends 4 bits of data + 1 bit of parity (with_parity) * */ static void em4x70_send_nibble(uint8_t nibble, bool with_parity) { int parity = 0; int msb_bit = 0; // Non automotive EM4x70 based tags are 3 bits + 1 parity. // So drop the MSB and send a parity bit instead after the command if (command_parity) msb_bit = 1; for (int i = msb_bit; i < 4; i++) { int bit = (nibble >> (3 - i)) & 1; em4x70_send_bit(bit); parity ^= bit; } if (with_parity) em4x70_send_bit(parity); } static void em4x70_send_byte(uint8_t byte) { // Send byte msb first for (int i = 0; i < 8; i++) em4x70_send_bit((byte >> (7 - i)) & 1); } static void em4x70_send_word(const uint16_t word) { // Split into nibbles uint8_t nibbles[4]; uint8_t j = 0; for (int i = 0; i < 2; i++) { uint8_t byte = (word >> (8 * i)) & 0xff; nibbles[j++] = (byte >> 4) & 0xf; nibbles[j++] = byte & 0xf; } // send 16 bit word with parity bits according to EM4x70 datasheet // sent as 4 x nibbles (4 bits + parity) for (int i = 0; i < 4; i++) { em4x70_send_nibble(nibbles[i], true); } // send column parities (4 bit) em4x70_send_nibble(nibbles[0] ^ nibbles[1] ^ nibbles[2] ^ nibbles[3], false); // send final stop bit (always "0") em4x70_send_bit(0); } static bool check_ack(void) { // returns true if signal structue corresponds to ACK, anything else is // counted as NAK (-> false) // ACK 64 + 64 // NAK 64 + 48 if (check_pulse_length(get_pulse_length(FALLING_EDGE), 2 * EM4X70_T_TAG_FULL_PERIOD) && check_pulse_length(get_pulse_length(FALLING_EDGE), 2 * EM4X70_T_TAG_FULL_PERIOD)) { // ACK return true; } // Otherwise it was a NAK or Listen Window return false; } // TODO: define and use structs for rnd, frnd, response static int authenticate(const uint8_t *rnd, const uint8_t *frnd, uint8_t *response) { if (find_listen_window(true)) { em4x70_send_nibble(EM4X70_COMMAND_AUTH, true); // Send 56-bit Random number for (int i = 0; i < 7; i++) { em4x70_send_byte(rnd[i]); } // Send 7 x 0's (Diversity bits) for (int i = 0; i < 7; i++) { em4x70_send_bit(0); } // Send 28-bit f(RN) // Send first 24 bits for (int i = 0; i < 3; i++) { em4x70_send_byte(frnd[i]); } // Send last 4 bits (no parity) em4x70_send_nibble((frnd[3] >> 4) & 0xf, false); // Receive header, 20-bit g(RN), LIW uint8_t grnd[EM4X70_MAX_RECEIVE_LENGTH] = {0}; int num = em4x70_receive(grnd, 20); if (num < 20) { if (g_dbglevel >= DBG_EXTENDED) Dbprintf("Auth failed"); return PM3_ESOFT; } bits2bytes(grnd, 24, response); return PM3_SUCCESS; } return PM3_ESOFT; } // Sets one (reflected) byte and returns carry bit // (1 if `value` parameter was greater than 0xFF) static int set_byte(uint8_t *target, uint16_t value) { int c = value > 0xFF ? 1 : 0; // be explicit about carry bit values *target = reflect8(value); return c; } static int bruteforce(const uint8_t address, const uint8_t *rnd, const uint8_t *frnd, uint16_t start_key, uint8_t *response) { uint8_t auth_resp[3] = {0}; uint8_t rev_rnd[7]; uint8_t temp_rnd[7]; reverse_arraycopy((uint8_t *)rnd, rev_rnd, sizeof(rev_rnd)); memcpy(temp_rnd, rnd, sizeof(temp_rnd)); for (int k = start_key; k <= 0xFFFF; ++k) { int c = 0; WDT_HIT(); uint16_t rev_k = reflect16(k); switch (address) { case 9: c = set_byte(&temp_rnd[0], rev_rnd[0] + ((rev_k) & 0xFFu)); c = set_byte(&temp_rnd[1], rev_rnd[1] + c + ((rev_k >> 8) & 0xFFu)); c = set_byte(&temp_rnd[2], rev_rnd[2] + c); c = set_byte(&temp_rnd[3], rev_rnd[3] + c); c = set_byte(&temp_rnd[4], rev_rnd[4] + c); c = set_byte(&temp_rnd[5], rev_rnd[5] + c); set_byte(&temp_rnd[6], rev_rnd[6] + c); break; case 8: c = set_byte(&temp_rnd[2], rev_rnd[2] + ((rev_k) & 0xFFu)); c = set_byte(&temp_rnd[3], rev_rnd[3] + c + ((rev_k >> 8) & 0xFFu)); c = set_byte(&temp_rnd[4], rev_rnd[4] + c); c = set_byte(&temp_rnd[5], rev_rnd[5] + c); set_byte(&temp_rnd[6], rev_rnd[6] + c); break; case 7: c = set_byte(&temp_rnd[4], rev_rnd[4] + ((rev_k) & 0xFFu)); c = set_byte(&temp_rnd[5], rev_rnd[5] + c + ((rev_k >> 8) & 0xFFu)); set_byte(&temp_rnd[6], rev_rnd[6] + c); break; default: Dbprintf("Bad block number given: %d", address); return PM3_ESOFT; } // Report progress every 256 attempts if ((k % 0x100) == 0) { Dbprintf("Trying: %04X", k); } // Due to performance reason, we only try it once. Therefore you need a very stable RFID communcation. if (authenticate(temp_rnd, frnd, auth_resp) == PM3_SUCCESS) { if (g_dbglevel >= DBG_INFO) Dbprintf("Authentication success with rnd: %02X%02X%02X%02X%02X%02X%02X", temp_rnd[0], temp_rnd[1], temp_rnd[2], temp_rnd[3], temp_rnd[4], temp_rnd[5], temp_rnd[6]); response[0] = (k >> 8) & 0xFF; response[1] = k & 0xFF; return PM3_SUCCESS; } if (BUTTON_PRESS() || data_available()) { Dbprintf("EM4x70 Bruteforce Interrupted"); return PM3_EOPABORTED; } } return PM3_ESOFT; } static int send_pin(const uint32_t pin) { // sends pin code for unlocking if (find_listen_window(true)) { // send PIN command em4x70_send_nibble(EM4X70_COMMAND_PIN, true); // --> Send TAG ID (bytes 4-7) for (int i = 0; i < 4; i++) { em4x70_send_byte(tag.data[7 - i]); } // --> Send PIN for (int i = 0; i < 4 ; i++) { em4x70_send_byte((pin >> (i * 8)) & 0xff); } // Wait TWALB (write access lock bits) WaitTicks(EM4X70_T_TAG_TWALB); // <-- Receive ACK if (check_ack()) { // Writes Lock Bits WaitTicks(EM4X70_T_TAG_WEE); // <-- Receive header + ID uint8_t tag_id[EM4X70_MAX_RECEIVE_LENGTH]; int num = em4x70_receive(tag_id, 32); if (num < 32) { Dbprintf("Invalid ID Received"); return PM3_ESOFT; } bits2bytes(tag_id, num, &tag.data[4]); return PM3_SUCCESS; } } return PM3_ESOFT; } static int write(const uint16_t word, const uint8_t address) { // writes to specified
if (find_listen_window(true)) { // send write command em4x70_send_nibble(EM4X70_COMMAND_WRITE, true); // send address data with parity bit em4x70_send_nibble(address, true); // send data word em4x70_send_word(word); // Wait TWA WaitTicks(EM4X70_T_TAG_TWA); // look for ACK sequence if (check_ack()) { // now EM4x70 needs EM4X70_T_TAG_TWEE (EEPROM write time) // for saving data and should return with ACK WaitTicks(EM4X70_T_TAG_WEE); if (check_ack()) { return PM3_SUCCESS; } } } return PM3_ESOFT; } static bool find_listen_window(bool command) { int cnt = 0; while (cnt < EM4X70_T_WAITING_FOR_LIW) { /* 80 ( 64 + 16 ) 80 ( 64 + 16 ) Flip Polarity 96 ( 64 + 32 ) 64 ( 32 + 16 +16 )*/ if (check_pulse_length(get_pulse_length(RISING_EDGE), (2 * EM4X70_T_TAG_FULL_PERIOD) + EM4X70_T_TAG_HALF_PERIOD) && check_pulse_length(get_pulse_length(RISING_EDGE), (2 * EM4X70_T_TAG_FULL_PERIOD) + EM4X70_T_TAG_HALF_PERIOD) && check_pulse_length(get_pulse_length(FALLING_EDGE), (2 * EM4X70_T_TAG_FULL_PERIOD) + EM4X70_T_TAG_FULL_PERIOD) && check_pulse_length(get_pulse_length(FALLING_EDGE), EM4X70_T_TAG_FULL_PERIOD + (2 * EM4X70_T_TAG_HALF_PERIOD))) { if (command) { /* Here we are after the 64 duration edge. * em4170 says we need to wait about 48 RF clock cycles. * depends on the delay between tag and us * * I've found between 4-5 quarter periods (32-40) works best */ WaitTicks(4 * EM4X70_T_TAG_QUARTER_PERIOD); // Send RM Command em4x70_send_bit(0); em4x70_send_bit(0); } return true; } cnt++; } return false; } static void bits2bytes(const uint8_t *bits, int length, uint8_t *out) { if (length % 8 != 0) { Dbprintf("Should have a multiple of 8 bits, was sent %d", length); } int num_bytes = length / 8; // We should have a multiple of 8 here for (int i = 1; i <= num_bytes; i++) { out[num_bytes - i] = bits2byte(bits, 8); bits += 8; } } static uint8_t bits2byte(const uint8_t *bits, int length) { // converts separate bits into a single "byte" uint8_t byte = 0; for (int i = 0; i < length; i++) { byte |= bits[i]; if (i != length - 1) byte <<= 1; } return byte; } static bool send_command_and_read(uint8_t command, uint8_t *bytes, size_t length) { int retries = EM4X70_COMMAND_RETRIES; while (retries) { retries--; if (find_listen_window(true)) { uint8_t bits[EM4X70_MAX_RECEIVE_LENGTH] = {0}; size_t out_length_bits = length * 8; em4x70_send_nibble(command, command_parity); int len = em4x70_receive(bits, out_length_bits); if (len < out_length_bits) { Dbprintf("Invalid data received length: %d, expected %d", len, out_length_bits); return false; } bits2bytes(bits, len, bytes); return true; } } return false; } /** * em4x70_read_id * * read pre-programmed ID (4 bytes) */ static bool em4x70_read_id(void) { return send_command_and_read(EM4X70_COMMAND_ID, &tag.data[4], 4); } /** * em4x70_read_um1 * * read user memory 1 (4 bytes including lock bits) */ static bool em4x70_read_um1(void) { return send_command_and_read(EM4X70_COMMAND_UM1, &tag.data[0], 4); } /** * em4x70_read_um2 * * read user memory 2 (8 bytes) */ static bool em4x70_read_um2(void) { return send_command_and_read(EM4X70_COMMAND_UM2, &tag.data[24], 8); } static bool find_em4x70_tag(void) { // function is used to check whether a tag on the proxmark is an // EM4170 tag or not -> speed up "lf search" process return find_listen_window(false); } static int em4x70_receive(uint8_t *bits, size_t length) { uint32_t pl; int bit_pos = 0; edge_detection_t edge = RISING_EDGE; bool foundheader = false; // Read out the header // 12 Manchester 1's (may miss some during settle period) // 4 Manchester 0's // Skip a few leading 1's as it could be noisy WaitTicks(6 * EM4X70_T_TAG_FULL_PERIOD); // wait until we get the transition from 1's to 0's which is 1.5 full windows for (int i = 0; i < EM4X70_T_READ_HEADER_LEN; i++) { pl = get_pulse_length(edge); if (check_pulse_length(pl, 3 * EM4X70_T_TAG_HALF_PERIOD)) { foundheader = true; break; } } if (!foundheader) { if (g_dbglevel >= DBG_EXTENDED) Dbprintf("Failed to find read header"); return 0; } // Skip next 3 0's, header check consumes the first 0 for (int i = 0; i < 3; i++) { // If pulse length is not 1 bit, then abort early if (!check_pulse_length(get_pulse_length(edge), EM4X70_T_TAG_FULL_PERIOD)) { return 0; } } // identify remaining bits based on pulse lengths // between listen windows only pulse lengths of 1, 1.5 and 2 are possible while (bit_pos < length) { pl = get_pulse_length(edge); if (check_pulse_length(pl, EM4X70_T_TAG_FULL_PERIOD)) { // pulse length 1 -> assign bit bits[bit_pos++] = edge == FALLING_EDGE ? 1 : 0; } else if (check_pulse_length(pl, 3 * EM4X70_T_TAG_HALF_PERIOD)) { // pulse length 1.5 -> 2 bits + flip edge detection if (edge == FALLING_EDGE) { bits[bit_pos++] = 0; bits[bit_pos++] = 0; edge = RISING_EDGE; } else { bits[bit_pos++] = 1; bits[bit_pos++] = 1; edge = FALLING_EDGE; } } else if (check_pulse_length(pl, 2 * EM4X70_T_TAG_FULL_PERIOD)) { // pulse length of 2 -> two bits if (edge == FALLING_EDGE) { bits[bit_pos++] = 0; bits[bit_pos++] = 1; } else { bits[bit_pos++] = 1; bits[bit_pos++] = 0; } } else { // Listen Window, or invalid bit break; } } return bit_pos; } void em4x70_info(const em4x70_data_t *etd, bool ledcontrol) { uint8_t status = 0; // Support tags with and without command parity bits command_parity = etd->parity; init_tag(); em4x70_setup_read(); // Find the Tag if (get_signalproperties() && find_em4x70_tag()) { // Read ID, UM1 and UM2 status = em4x70_read_id() && em4x70_read_um1() && em4x70_read_um2(); } StopTicks(); lf_finalize(ledcontrol); reply_ng(CMD_LF_EM4X70_INFO, status, tag.data, sizeof(tag.data)); } void em4x70_write(const em4x70_data_t *etd, bool ledcontrol) { uint8_t status = 0; command_parity = etd->parity; init_tag(); em4x70_setup_read(); // Find the Tag if (get_signalproperties() && find_em4x70_tag()) { // Write status = write(etd->word, etd->address) == PM3_SUCCESS; if (status) { // Read Tag after writing if (em4x70_read_id()) { em4x70_read_um1(); em4x70_read_um2(); } } } StopTicks(); lf_finalize(ledcontrol); reply_ng(CMD_LF_EM4X70_WRITE, status, tag.data, sizeof(tag.data)); } void em4x70_unlock(const em4x70_data_t *etd, bool ledcontrol) { uint8_t status = 0; command_parity = etd->parity; init_tag(); em4x70_setup_read(); // Find the Tag if (get_signalproperties() && find_em4x70_tag()) { // Read ID (required for send_pin command) if (em4x70_read_id()) { // Send PIN status = send_pin(etd->pin) == PM3_SUCCESS; // If the write succeeded, read the rest of the tag if (status) { // Read Tag // ID doesn't change em4x70_read_um1(); em4x70_read_um2(); } } } StopTicks(); lf_finalize(ledcontrol); reply_ng(CMD_LF_EM4X70_UNLOCK, status, tag.data, sizeof(tag.data)); } void em4x70_auth(const em4x70_data_t *etd, bool ledcontrol) { uint8_t status = 0; uint8_t response[3] = {0}; command_parity = etd->parity; init_tag(); em4x70_setup_read(); // Find the Tag if (get_signalproperties() && find_em4x70_tag()) { // Authenticate and get tag response status = authenticate(etd->rnd, etd->frnd, response) == PM3_SUCCESS; } StopTicks(); lf_finalize(ledcontrol); reply_ng(CMD_LF_EM4X70_AUTH, status, response, sizeof(response)); } void em4x70_brute(const em4x70_data_t *etd, bool ledcontrol) { uint8_t status = 0; uint8_t response[2] = {0}; command_parity = etd->parity; init_tag(); em4x70_setup_read(); // Find the Tag if (get_signalproperties() && find_em4x70_tag()) { // Bruteforce partial key status = bruteforce(etd->address, etd->rnd, etd->frnd, etd->start_key, response) == PM3_SUCCESS; } StopTicks(); lf_finalize(ledcontrol); reply_ng(CMD_LF_EM4X70_BRUTE, status, response, sizeof(response)); } void em4x70_write_pin(const em4x70_data_t *etd, bool ledcontrol) { uint8_t status = 0; command_parity = etd->parity; init_tag(); em4x70_setup_read(); // Find the Tag if (get_signalproperties() && find_em4x70_tag()) { // Read ID (required for send_pin command) if (em4x70_read_id()) { // Write new PIN if ((write((etd->pin) & 0xFFFF, EM4X70_PIN_WORD_UPPER) == PM3_SUCCESS) && (write((etd->pin >> 16) & 0xFFFF, EM4X70_PIN_WORD_LOWER) == PM3_SUCCESS)) { // Now Try to authenticate using the new PIN // Send PIN status = send_pin(etd->pin) == PM3_SUCCESS; // If the write succeeded, read the rest of the tag if (status) { // Read Tag // ID doesn't change em4x70_read_um1(); em4x70_read_um2(); } } } } StopTicks(); lf_finalize(ledcontrol); reply_ng(CMD_LF_EM4X70_WRITEPIN, status, tag.data, sizeof(tag.data)); } void em4x70_write_key(const em4x70_data_t *etd, bool ledcontrol) { uint8_t status = 0; command_parity = etd->parity; init_tag(); em4x70_setup_read(); // Find the Tag if (get_signalproperties() && find_em4x70_tag()) { // Read ID to ensure we can write to card if (em4x70_read_id()) { status = 1; // Write each crypto block for (int i = 0; i < 6; i++) { uint16_t key_word = (etd->crypt_key[(i * 2) + 1] << 8) + etd->crypt_key[i * 2]; // Write each word, abort if any failure occurs if (write(key_word, 9 - i) != PM3_SUCCESS) { status = 0; break; } } // TODO: Ideally here we would perform a test authentication // to ensure the new key was written correctly. This is // what the datasheet suggests. We can't do that until // we have the crypto algorithm implemented. } } StopTicks(); lf_finalize(ledcontrol); reply_ng(CMD_LF_EM4X70_WRITEKEY, status, tag.data, sizeof(tag.data)); }