# Building on Windows
You will need to use the Gator96100 Proxspace package to assist in your windows installation.
This can be downloaded from https://github.com/Gator96100/ProxSpace/

## Notes
If you receive gcc errors using v3.1 during build, download and use v2.2. This may help resolve the issue.

- https://github.com/Gator96100/ProxSpace/releases/tag/v3.1   (release v3.1 with gcc v7.3.0 )
- https://github.com/Gator96100/ProxSpace/releases/tag/v2.2   (release v2.2 with gcc v5.3.0 arm-none-eabi-gcc v7.1.0)

---
# Video Installation guide
[![Windows Installation tutorial](https://github.com/5w0rdfish/Proxmark3-RDV4-ParrotOS/blob/master/screenshot-www.youtube.com-2019.03.17-20-44-33.png)](https://youtu.be/zzF0NCMJnYU "Windows Installation Tutorial")

## Manual Installation

### Driver Installation

Install required drivers for your windows installation. You will may need admin privileges to do this. 
(This is covered in the video) Step by step guides are online such as [RiscCorps](https://store.ryscc.com/blogs/news/how-to-install-a-proxmark3-driver-on-windows-10)

### Install Github

Install Github for Windows https://desktop.github.com/

### Download / clone Proxspace repo

Download the required proxspace repo. https://github.com/Gator96100/ProxSpace/

Extract 'ProxSpace' to a location on drive without spaces. 
For example D:\OneDrive\Documents\GitHub is ok whereas C:\My Documents\My Projects\proxspace is not.

### Clone RFID RESEARCH GROUP files

Clone fork
```sh
git clone https://github.com/RfidResearchGroup/proxmark3.git
```
### Copy files to Proxspace

Copy all the contents from the proxmark3 folder into the proxspace pm3 folder

### Run the .bat

Run runme.bat or runme64.bat depending on your Windows architecture.

Please note you will need to use / as you are using BASH.

### Make 

CLEAN COMPILE inside the pm3 window.
```sh
make clean && make all
```
### Flash the image

Flash the BOOTROM & FULLIMAGE
```sh
client/flasher.exe comX -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf
```
	
### Run the client

Assuming you have Proxmark3 Windows drivers installed you can run the Proxmark software where "X" is the com port number assigned to proxmark3 under Windows. 

Change into the client folder
```sh
cd client
```

Run the client	
```sh
./proxmark3.exe comX
```

### Test

Check your firmware revision on the Proxmark III with 
```sh
hw ver
```
For basic help type help. Or for help on a set of sub commands type the command followed by help. For example hf mf help.
Make sure you head over to the use of [proxmark area](https://github.com/5w0rdfish/proxmark3/tree/master/Use_of_Proxmark) to help you get on your way!