
<a id="Top"></a>

# Mac OS X - MacPorts automatic installation
<b><h3>These insturctions won't work on Apple Silicon yet!</h3> An arm64 native build of arm-none-eabi-gcc is still not available (as of 2021-11-26).</b>

# Table of Contents
- [Mac OS X - MacPorts automatic installation](#mac-os-x---macports-automatic-installation)
- [Table of Contents](#table-of-contents)
  - [Main prerequisite](#main-prerequisite)
  - [Installing latest releases](#installing-latest-releases)
  - [Build from source](#build-from-source)
- [Clone the Iceman repository](#clone-the-iceman-repository)
  - [Compile the project](#compile-the-project)
    - [the button trick](#the-button-trick)
  - [Run it](#run-it)


## Main prerequisite
^[Top](#top)

1. Have MacPorts installed. Visit https://www.macports.org/ for more information.

    * MacPorts may require a bit more setup. You first need to set up your PATH variable:

    ```bash
    export "/opt/local/bin:/opt/local/sbin:/usr/local/bin:/usr/local/sbin:$PATH"
    ```

   For a somewhat seamless development environment:

    ```bash
    export C_INCLUDE_PATH="/opt/local/include"
    export CPLUS_INCLUDE_PATH="/opt/local/include"
    export LIBRARY_PATH="/opt/local/lib"
    export LDFLAGS="-L/opt/local/lib"
    export CFLAGS="-I/opt/local/include"
    export CPPFLAGS="-isystem/opt/local/include -I/opt/local/include"
    ```

## Installing latest releases
^[Top](#top)

Packaging for latest releases are available on MacPorts with the port name `proxmark3-iceman`, with a variant for PM3GENERIC firmwares available as `+pm3generic`.

Installing is as simple as `sudo port install proxmark3-iceman` and if you want to install for PM3GENERIC, you can run `sudo port install proxmark3-iceman +pm3generic` instead.

## Build from source
^[Top](#top)

These instructions will show how to setup the environment on OSX to the point where you'll be able to clone and compile the repo by yourself, as on Linux, Windows, etc.

1. Have MacPorts installed. See above for details.

2. Install dependencies:

    ```
    sudo port install readline qt5 qt5-qtbase pkgconfig arm-none-eabi-gcc arm-none-eabi-binutils lua52 coreutils openssl@3
    ```

3. Clamp Python version for pkg-config

    MacPorts doesn't handle Python version defaults when it comes to pkg-config. So even if you have done:

    ```
    sudo port install python39 cython39

    sudo port select --set python python39  # this also makes calls to "python" operate on python3.9
    sudo port select --set python3 python39
    sudo port select --set cython cython39 
    ```

    This won't set a default python3.pc (and python3-embed.pc) under the MacPorts pkgconfig includes folder.

    To fix that, follow these steps:

    ```
    cd /opt/local/lib/pkgconfig
    sudo ln -svf python3.pc python-3.9.pc
    sudo ln -svf python3-embed.pc python-3.9-embed.pc
    ```

4. (optional) Install makefile dependencies:

    ```
    sudo port install recode
    sudo port install astyle
    ```


# Clone the Iceman repository
^[Top](#top)

```sh
git clone https://github.com/RfidResearchGroup/proxmark3.git
cd proxmark3
```

## Compile the project
^[Top](#top)

Now you're ready to follow the [compilation instructions](/doc/md/Use_of_Proxmark/0_Compilation-Instructions.md).
From there, you can follow the original instructions. 
_Take extra note to instructions if you don't have a Proxmark3 RDV4 device._

To flash on OS X, better to enter the bootloader mode manually, else you may experience errors.

### the button trick
^[Top](#top)

With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark3 as you plug it into a USB port. You can release the button, two of the four LEDs should stay on. You're in bootloader mode, ready for the next step. In case the two LEDs don't stay on when you're releasing the button, you've an old bootloader, start over and keep the button pressed during the whole flashing procedure.


## Run it
^[Top](#top)

To use the compiled client, you can use `pm3` script, it is a wrapper of the proxmark3 client that handles automatic detection of your proxmark.
```sh
pm3
```

If you want to manually select serial port, remember that the Proxmark3 port is `/dev/tty.usbmodemiceman1`, so commands become:
```sh
proxmark3 /dev/ttyACM0  =>  proxmark3 /dev/tty.usbmodemiceman1
```