# Command Cheat Sheet |Generic|Low Frequence 125 kHz|High Frequence 13.56 MHz| |---|---|---| |[Generic](#Generic)|[T55XX](#T55XX)|[MIFARE](#MIFARE)| |[Data](#Data)|[HID Prox](#HID-Prox)|[iCLASS](#iCLASS)| |[Memory](#Memory)|[Indala](#Indala)|| |[Sim Module](#Sim-Module)|[Hitag](#Hitag)|| |[Lua Scripts](#Lua-Scripts)||| |[Smart Card](#Smart-Card)||| |[Wiegand convertion](#Wiegand-manipulation)||| ## Generic ^[Top](#top) Identify High Frequency cards ``` pm3 --> hf search ``` Identify Low Frequency cards ``` pm3 --> lf search ``` Measure antenna characteristics, LF/HF voltage should be around 20-45+ V ``` pm3 --> hw tune ``` Check versioning ``` pm3 --> hw version ``` Check overall status ``` pm3 --> hw status ``` ## iCLASS ^[Top](#top) Reverse permute iCLASS master key ``` Options --- r reverse permuted key pm3 --> hf iclass permute r 3F90EBF0910F7B6F ``` iCLASS Reader ``` pm3 --> hf iclass reader ``` Dump iCLASS card contents ``` Options --- k : *Access Key as 16 hex symbols or 1 hex to select key from memory m3 --> hf iclass dump k 0 ``` Read iCLASS Block ``` Options --- b : The block number as 2 hex symbols k : Access Key as 16 hex symbols or 1 hex to select key from memory pm3 --> hf iclass rdbl b 7 k 0 ``` Write to iCLASS Block ``` Options --- b : The block number as 2 hex symbols d : Set the Data to write as 16 hex symbols k : Access Key as 16 hex symbols or 1 hex to select key from memory pm3 --> hf iclass wrbl b 07 d 6ce099fe7e614fd0 k 0 ``` Print keystore ``` Options --- p : print keys loaded into memory pm3 --> hf iclass managekeys p ``` Add key to keystore [0-7] ``` Options --- n : specify the keyNbr to set in memory k : set a key in memory pm3 --> hf iclass managekeys n 3 k AFA785A7DAB33378 ``` Encrypt iCLASS Block ``` Options --- d : 16 bytes hex k : 16 bytes hex pm3 --> hf iclass encrypt d 0000000f2aa3dba8 ``` Decrypt iCLASS Block / file ``` Options --- d : 16 bytes hex f : filename of dump k : 16 bytes hex pm3 --> hf iclass decrypt d 2AD4C8211F996871 pm3 --> hf iclass decrypt f hf-iclass-db883702f8ff12e0.bin ``` Load iCLASS dump into memory for simulation ``` Options --- f : load iCLASS tag-dump filename pm3 --> hf iclass eload f hf-iclass-db883702f8ff12e0.bin ``` Clone iCLASS Legacy Sequence ``` pm3 --> hf iclass rdbl b 7 k 0 pm3 --> hf iclass wrbl b 7 d 6ce099fe7e614fd0 k 0 ``` Simulate iCLASS ``` Options --- 0 simulate the given CSN 1 simulate default CSN 2 Runs online part of LOCLASS attack 3 Full simulation using emulator memory (see 'hf iclass eload') 4 Runs online part of LOCLASS attack against reader in keyroll mode pm3 --> hf iclass sim 3 ``` Simulate iCLASS Sequence ``` pm3 --> hf iclass dump k 0 pm3 --> hf iclass eload f hf-iclass-db883702f8ff12e0.bin pm3 --> hf iclass sim 3 ``` Extract custom iCLASS key (loclass attack) ``` Options --- f : specify a filename to clone from k : Access Key as 16 hex symbols or 1 hex to select key from memory e : If 'e' is specified, elite computations applied to key pm3 --> hf iclass sim 2 pm3 --> hf iclass loclass f iclass_mac_attack.bin pm3 --> hf iclass managekeys n 7 k pm3 --> hf iclass dump k 7 e ``` Verify custom iCLASS key ``` Options --- f : Dictionary file with default iCLASS keys u : CSN p : EPURSE m : macs e : elite pm3 --> hf iclass lookup u 010a0ffff7ff12e0 p feffffffffffffff m 66348979153c41b9 f iclass_default_keys e ``` ## MIFARE ^[Top](#top) Check for default keys ``` Options --- <*card memory> [t|d|s|ss] * : all sectors card memory : 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K d : write keys to binary file pm3 --> hf mf chk *1 ? d mfc_default_keys ``` Check for default keys from local memory ``` Options --- card memory : 0 - MINI(320 bytes), 1 - 1K, 2 - 2K, 4 - 4K m : use dictionary from flashmemory pm3 --> hf mf fchk 1 m ``` Dump MIFARE card contents ``` Options --- : 0 = 320 bytes (MIFARE Mini), 1 = 1K (default), 2 = 2K, 4 = 4K k : key filename, if no given, UID will be used as filename" f : data filename, if no given, UID will be used as filename pm3 --> hf mf dump 1 pm3 --> hf mf dump 1 k hf-mf-A29558E4-key.bin f hf-mf-A29558E4-dump.bin ``` Convert .bin to .eml ``` Options --- i : Specifies the dump-file (input). If omitted, 'dumpdata.bin' is used pm3 --> script run hf_mf_dumptoemulator -i dumpdata.bin ``` Write to MIFARE block ``` Options --- pm3 --> hf mf wrbl 0 A FFFFFFFFFFFF d3a2859f6b880400c801002000000016 ``` Run autopwn, to backup a MIFARE tag ``` Options --- pm3 --> hf mf autopwn ``` Run hardnested attack ``` Options --- [known target key (12 hex symbols)] [w] [s] w : Acquire nonces and write them to binary file nonces.bin pm3 --> hf mf hardnested 0 A 8829da9daf76 0 A w ``` Load MIFARE emul dump file into memory for simulation ``` Options --- [card memory]: 0 = 320 bytes (MIFARE Mini), 1 = 1K (default), 2 = 2K, 4 = 4K, u = UL pm3 --> hf mf eload hf-mf-353C2AA6 pm3 --> hf mf eload 1 hf-mf-353C2AA6 ``` Simulate MIFARE ``` u : (Optional) UID 4,7 or 10 bytes. If not specified, the UID 4B from emulator memory will be used pm3 --> hf mf sim u 353c2aa6 ``` Simulate MIFARE Sequence ``` pm3 --> hf mf chk *1 ? d mfc_default_keys pm3 --> hf mf dump 1 pm3 --> script run hf_mf_dumptoemulator -i dumpdata.bin pm3 --> hf mf eload 353C2AA6 pm3 --> hf mf sim u 353c2aa6 ``` Clone MIFARE 1K Sequence ``` pm3 --> hf mf chk *1 ? d mfc_default_keys pm3 --> hf mf dump pm3 --> hf mf restore 1 u 4A6CE843 k hf-mf-A29558E4-key.bin f hf-mf-A29558E4-dump.bin ``` Read MIFARE Ultralight EV1 ``` pm3 --> hf mfu info ``` Clone MIFARE Ultralight EV1 Sequence ``` pm3 --> hf mfu dump k FFFFFFFF pm3 --> script run hf_mfu_dumptoemulator -i hf-mfu-XXXX-dump.bin -o hf-mfu-XXXX-dump.eml pm3 --> hf mfu eload u hf-mfu-XXXX-dump.eml pm3 --> hf mfu sim t 7 u hf-mfu-XXXX-dump.eml ``` Bruteforce MIFARE Classic card numbers from 11223344 to 11223346 ``` pm3 --> script run hf_mfc_uidbruteforce -s 0x11223344 -e 0x11223346 -t 1000 -x mfc ``` Bruteforce MIFARE Ultralight EV1 card numbers from 11223344556677 to 11223344556679 ``` pm3 --> script run hf_mfc_uidbruteforce -s 0x11223344556677 -e 0x11223344556679 -t 1000 -x mfu ``` ## Wiegand manipulation ^[Top](#top) List all available weigand formats in client ``` pm3 --> wiegand list ``` Convert Site & Facility code to Wiegand raw hex ``` Options --- w o f c i w : wiegand format to use o : OEM number / site code f : facility code c : card number i : issue level pm3 --> wiegand encode 0 56 150 ``` Convert Site & Facility code from Wiegand raw hex to numbers ``` Options --- p : ignore parity errors pm3 --> wiegand decode 2006f623ae ``` ## HID Prox ^[Top](#top) Read HID Prox card ``` pm3 --> lf hid read ``` Demodulate HID Prox card ``` pm3 --> lf hid demod ``` Simulate Prox card ``` pm3 --> lf hid sim 200670012d ``` Clone Prox to T5577 card ``` pm3 --> lf hid clone 200670012d ``` Brute force HID reader ``` Options --- a : 26|33|34|35|37|40|44|84 f : 8-bit value HID facility code c : (optional) cardnumber to start with, max 65535 d : delay betweens attempts in ms. Default 1000ms v : verbose logging, show all tries pm3 --> lf hid brute a 26 f 224 pm3 --> lf hid brute v a 26 f 21 c 200 d 2000 ``` ## Indala ^[Top](#top) Read Indala card ``` pm3 --> lf indala read ``` Demodulate Indala card ``` pm3 --> lf indala demod ``` Simulate Indala card ``` Options --- : 64/224 UID pm3 --> lf indala sim a0000000c2c436c1 ``` Clone to T55x7 card ``` Options --- : 64/224 UID pm3 --> lf indala clone a0000000c2c436c1 ``` ## Hitag ^[Top](#top) Read Hitag information ``` pm3 --> lf hitag info ``` Act as Hitag reader ``` Options --- HitagS: 01 : Read all pages, challenge mode 02 : Read all pages, crypto mode. Set key=0 for no auth Hitag2: 21 : Read all pages, password mode. Default: 4D494B52 ("MIKR") 22 : Read all pages, challenge mode 23 : Read all pages, crypto mode. Key format: ISK high + ISK low. Default: 4F4E4D494B52 ("ONMIKR") 25 : Test recorded authentications 26 : Just read UID pm3 --> lf hitag 26 pm3 --> lf hitag 21 4D494B52 ``` Sniff Hitag traffic ``` pm3 --> lf hitag sniff pm3 --> lf hitag list ``` Simulate Hitag ``` pm3 --> lf hitag sim c378181c_a8f7.ht2 ``` Write to Hitag block ``` Options --- HitagS: 03 : Write page, challenge mode 04 : Write page, crypto mode. Set key=0 for no auth Hitag2: 24 : Write page, crypto mode. Key format: ISK high + ISK low. 27 : Write page, password mode. Default: 4D494B52 ("MIKR") pm3 --> lf hitag writer 24 499602D2 1 00000000 ``` Simulate Hitag2 sequence ``` pm3 --> lf hitag reader 21 56713368 pm3 --> lf hitag sim c378181c_a8f7.ht2 ``` ## T55XX ^[Top](#top) Detect T55XX card ``` pm3 --> lf t55xx detect ``` Configure modulation ``` Options --- : Set modulation EM is ASK HID Prox is FSK Indala is PSK pm3 --> lf t55xx config FSK ``` Set timings to default ``` Options --- p : persist to flashmemory z : Set default t55x7 timings (use p to save if required) pm3 --> lf t55xx deviceconfig z p ``` Write to T55xx block ``` b : block number to write. Between 0-7 d : 4 bytes of data to write (8 hex characters) pm3 --> lf t55xx wr b 0 d 00081040 ``` Wipe a T55xx tag and set defaults ``` pm3 --> lf t55xx wipe ``` ## Data ^[Top](#top) Get raw samples [512-40000] ``` pm3 --> data samples ``` Save samples to file ``` pm3 --> data save ``` Load samples from file ``` pm3 --> data load ``` ## Lua Scripts ^[Top](#top) List lua Scripts ``` pm3 --> script list ``` View lua helptext ``` pm3 --> script run -h ``` Convert .bin to .eml ``` Options --- -i Specifies the dump-file (input). If omitted, 'dumpdata.bin' is used -o Specifies the output file. If omitted, .eml is used pm3 --> script run hf_mf_dumptoemulator -i xxxxxxxxxxxxxx.bin ``` Convert .eml to .bin ``` Options --- -i Specifies the dump-file (input). If omitted, 'dumpdata.eml' is used -o Specifies the output file. If omitted, .bin is used pm3 --> script run data_emulatortohtml -i myfile.eml -o myfile.bin ``` Format Mifare card ``` Options --- -k The current six byte key with write access -n The new key that will be written to the card -a The new access bytes that will be written to the card -x Execute the commands aswell pm3 --> script run hf_mf_format -k FFFFFFFFFFFF -n FFFFFFFFFFFF -x ``` ## Memory ^[Top](#top) Load default keys into flash memory (RDV4 only) ``` Options --- o : offset in memory f : file name m : upload 6 bytes keys (mifare key dictionary) i : upload 8 bytes keys (iClass key dictionary) t : upload 4 bytes keys (pwd dictionary) pm3 --> mem load f mfc_default_keys m pm3 --> mem load f t55xx_default_pwds t pm3 --> mem load f iclass_default_keys i ``` ## Sim Module ^[Top](#top) Upgrade Sim Module firmware ``` pm3 --> smart upgrade f ../tools/simmodule/sim011.bin ``` ## Smart Card ^[Top](#top) Get Smart Card Information ``` pm3 --> smart info ``` Act like an IS07816 reader ``` pm3 --> smart reader ``` Set clock speed ``` Options --- c : clockspeed (0 = 16MHz, 1=8MHz, 2=4MHz) pm3 --> smart setclock c 2 ``` Send raw hex data ``` Options --- r : do not read response a : active smartcard without select (reset smart module) s : active smartcard with select (get ATR) t : executes TLV decoder if it possible 0 : use protocol T=0 d : bytes to send pm3 --> smart raw s 0 d 00a404000e315041592e5359532e4444463031 : 1PAY.SYS.DDF01 PPSE directory with get ATR pm3 --> smart raw 0 d 00a404000e325041592e5359532e4444463031 : 2PAY.SYS.DDF01 PPSE directory pm3 --> smart raw 0 t d 00a4040007a0000000041010 : Mastercard pm3 --> smart raw 0 t d 00a4040007a0000000031010 : Visa ```` Bruteforce SPI ``` Options --- t : executes TLV decoder if it possible pm3 --> smart brute pm3 --> smart brute t ```