//----------------------------------------------------------------------------- // Copyright (C) Proxmark3 contributors. See AUTHORS.md for details. // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // See LICENSE.txt for the text of the license. //----------------------------------------------------------------------------- // // The FPGA is responsible for interfacing between the A/D, the coil drivers, // and the ARM. In the low-frequency modes it passes the data straight // through, so that the ARM gets raw A/D samples over the SSP. In the high- // frequency modes, the FPGA might perform some demodulation first, to // reduce the amount of data that we must send to the ARM. //----------------------------------------------------------------------------- /* Communication between ARM / FPGA is done inside armsrc/fpgaloader.c see: function FpgaSendCommand() Send 16 bit command / data pair to FPGA with the bit format: +------ frame layout circa 2020 ------------------+ | 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 | +-------------------------------------------------+ | C C C C M M M M P P P P P P P P | C = FPGA_CMD_SET_CONFREG, M = FPGA_MAJOR_MODE_*, P = FPGA_LF_* or FPGA_HF_* parameter | C C C C D D D D D D D D | C = FPGA_CMD_SET_DIVISOR, D = divisor | C C C C T T T T T T T T | C = FPGA_CMD_SET_EDGE_DETECT_THRESHOLD, T = threshold | C C C C E | C = FPGA_CMD_TRACE_ENABLE, E=0 off, E=1 on +-------------------------------------------------+ +------ frame layout current ---------------------+ | 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 | +-------------------------------------------------+ | C C C C M M M P P P P P P | C = FPGA_CMD_SET_CONFREG, M = FPGA_MAJOR_MODE_*, P = FPGA_LF_* or FPGA_HF_* parameter | C C C C D D D D D D D D | C = FPGA_CMD_SET_DIVISOR, D = divisor | C C C C T T T T T T T T | C = FPGA_CMD_SET_EDGE_DETECT_THRESHOLD, T = threshold | C C C C E | C = FPGA_CMD_TRACE_ENABLE, E=0 off, E=1 on +-------------------------------------------------+ shift_reg receive this 16bit frame LF command ---------- shift_reg[15:12] == 4bit command LF has three commands (FPGA_CMD_SET_CONFREG, FPGA_CMD_SET_DIVISOR, FPGA_CMD_SET_EDGE_DETECT_THRESHOLD) Current commands uses only 2bits. We have room for up to 4bits of commands total (7). LF data ------- shift_reg[11:0] == 12bit data lf data is divided into MAJOR MODES and configuration values. The major modes uses 3bits (0,1,2,3,7 | 000, 001, 010, 011, 111) 000 FPGA_MAJOR_MODE_LF_READER = Act as LF reader (modulate) 001 FPGA_MAJOR_MODE_LF_EDGE_DETECT = Simulate LF 010 FPGA_MAJOR_MODE_LF_PASSTHRU = Passthrough mode, CROSS_LO line connected to SSP_DIN. SSP_DOUT logic level controls if we modulate / listening 011 FPGA_MAJOR_MODE_LF_ADC = refactor hitag2, clear ADC sampling 111 FPGA_MAJOR_MODE_OFF = turn off sampling. Each one of this major modes can have options. Currently these two major modes uses options. - FPGA_MAJOR_MODE_LF_READER - FPGA_MAJOR_MODE_LF_EDGE_DETECT FPGA_MAJOR_MODE_LF_READER ------------------------------------- lf_field = 1bit (FPGA_LF_ADC_READER_FIELD) You can send FPGA_CMD_SET_DIVISOR to set with FREQUENCY the fpga should sample at divisor = 8bits shift_reg[7:0] FPGA_MAJOR_MODE_LF_EDGE_DETECT ------------------------------------------ lf_ed_toggle_mode = 1bits lf_ed_threshold = 8bits threshold defaults to 127 You can send FPGA_CMD_SET_EDGE_DETECT_THRESHOLD to set a custom threshold lf_ed_threshold = 8bits threshold value. conf_word 12bits conf_word[7:5] = 3bit major mode. conf_word[0] = 1bit lf_field conf_word[1] = 1bit lf_ed_toggle_mode conf_word[7:0] = 8bit divisor conf_word[7:0] = 8bit threshold */ // Defining commands, modes and options. This must be aligned to the definitions in armsrc/fpgaloader.h // Note: the definitions here are without shifts // Definitions for the FPGA commands. `define FPGA_CMD_SET_CONFREG 1 `define FPGA_CMD_SET_DIVISOR 2 `define FPGA_CMD_SET_EDGE_DETECT_THRESHOLD 3 `define FPGA_CMD_TRACE_ENABLE 2 // Major modes `define FPGA_MAJOR_MODE_LF_READER 0 `define FPGA_MAJOR_MODE_LF_EDGE_DETECT 1 `define FPGA_MAJOR_MODE_LF_PASSTHRU 2 `define FPGA_MAJOR_MODE_LF_ADC 3 `define FPGA_MAJOR_MODE_HF_READER 0 `define FPGA_MAJOR_MODE_HF_SIMULATOR 1 `define FPGA_MAJOR_MODE_HF_ISO14443A 2 `define FPGA_MAJOR_MODE_HF_SNIFF 3 `define FPGA_MAJOR_MODE_HF_ISO18092 4 `define FPGA_MAJOR_MODE_HF_GET_TRACE 5 `define FPGA_MAJOR_MODE_OFF 7 // Options for LF_READER `define FPGA_LF_ADC_READER_FIELD 1 // Options for LF_EDGE_DETECT `define FPGA_LF_EDGE_DETECT_READER_FIELD 1 `define FPGA_LF_EDGE_DETECT_TOGGLE_MODE 2 // Options for the generic HF reader `define FPGA_HF_READER_MODE_RECEIVE_IQ 0 `define FPGA_HF_READER_MODE_RECEIVE_AMPLITUDE 1 `define FPGA_HF_READER_MODE_RECEIVE_PHASE 2 `define FPGA_HF_READER_MODE_SEND_FULL_MOD 3 `define FPGA_HF_READER_MODE_SEND_SHALLOW_MOD 4 `define FPGA_HF_READER_MODE_SNIFF_IQ 5 `define FPGA_HF_READER_MODE_SNIFF_AMPLITUDE 6 `define FPGA_HF_READER_MODE_SNIFF_PHASE 7 `define FPGA_HF_READER_MODE_SEND_JAM 8 `define FPGA_HF_READER_SUBCARRIER_848_KHZ 0 `define FPGA_HF_READER_SUBCARRIER_424_KHZ 1 `define FPGA_HF_READER_SUBCARRIER_212_KHZ 2 `define FPGA_HF_READER_2SUBCARRIERS_424_484_KHZ 3 // Options for the HF simulated tag, how to modulate `define FPGA_HF_SIMULATOR_NO_MODULATION 0 `define FPGA_HF_SIMULATOR_MODULATE_BPSK 1 `define FPGA_HF_SIMULATOR_MODULATE_212K 2 `define FPGA_HF_SIMULATOR_MODULATE_424K 4 `define FPGA_HF_SIMULATOR_MODULATE_424K_8BIT 5 // Options for ISO14443A `define FPGA_HF_ISO14443A_SNIFFER 0 `define FPGA_HF_ISO14443A_TAGSIM_LISTEN 1 `define FPGA_HF_ISO14443A_TAGSIM_MOD 2 `define FPGA_HF_ISO14443A_READER_LISTEN 3 `define FPGA_HF_ISO14443A_READER_MOD 4 // Options for ISO18092 / Felica `define FPGA_HF_ISO18092_FLAG_NOMOD 1 // 0001 disable modulation module `define FPGA_HF_ISO18092_FLAG_424K 2 // 0010 should enable 414k mode (untested). No autodetect `define FPGA_HF_ISO18092_FLAG_READER 4 // 0100 enables antenna power, to act as a reader instead of tag