#include "felica.h" #include "proxmark3_arm.h" #include "BigBuf.h" #include "util.h" #include "protocols.h" #include "crc16.h" #include "fpgaloader.h" #include "string.h" #include "commonutil.h" #include "dbprint.h" #include "ticks.h" #include "iso18.h" // FeliCa timings // minimum time between the start bits of consecutive transfers from reader to tag: 6800 carrier (13.56MHz) cycles #ifndef FELICA_REQUEST_GUARD_TIME # define FELICA_REQUEST_GUARD_TIME (6800/16 + 1) // 426 #endif // FRAME DELAY TIME 2672 carrier cycles #ifndef FELICA_FRAME_DELAY_TIME # define FELICA_FRAME_DELAY_TIME (2672/16 + 1) // 168 #endif #ifndef DELAY_AIR2ARM_AS_READER #define DELAY_AIR2ARM_AS_READER (3 + 16 + 8 + 8*16 + 4*16 - 8*16) // 91 #endif #ifndef DELAY_ARM2AIR_AS_READER #define DELAY_ARM2AIR_AS_READER (4*16 + 8*16 + 8 + 8 + 1) // 209 #endif #define AddCrc(data, len) compute_crc(CRC_FELICA, (data), (len), (data)+(len)+1, (data)+(len)) static uint32_t felica_timeout; static uint32_t felica_nexttransfertime; static uint32_t felica_lasttime_prox2air_start; static void iso18092_setup(uint8_t fpga_minor_mode); static uint8_t felica_select_card(felica_card_select_t *card); static void TransmitFor18092_AsReader(uint8_t *frame, int len, uint32_t *timing, uint8_t power, uint8_t highspeed); static bool WaitForFelicaReply(uint16_t maxbytes); static void iso18092_set_timeout(uint32_t timeout) { felica_timeout = timeout + (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER) / (16 * 8) + 2; } static uint32_t iso18092_get_timeout(void) { return felica_timeout - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER) / (16 * 8) - 2; } #ifndef FELICA_MAX_FRAME_SIZE #define FELICA_MAX_FRAME_SIZE 260 #endif //structure to hold outgoing NFC frame static uint8_t frameSpace[FELICA_MAX_FRAME_SIZE + 4]; //structure to hold incoming NFC frame, used for ISO/IEC 18092-compatible frames static struct { enum { STATE_UNSYNCD, STATE_TRYING_SYNC, STATE_GET_LENGTH, STATE_GET_DATA, STATE_GET_CRC, STATE_FULL } state; uint16_t shiftReg; //for synchronization and offset calculation int posCnt; bool crc_ok; int rem_len; uint16_t len; uint8_t byte_offset; uint8_t *framebytes; //should be enough. maxlen is 255, 254 for data, 2 for sync, 2 for crc // 0,1 -> SYNC, 2 - len, 3-(len+1)->data, then crc } FelicaFrame; //b2 4d is SYNC, 45645 in 16-bit notation, 10110010 01001101 binary. Frame will not start filling until this is shifted in //bit order in byte -reverse, I guess? [((bt>>0)&1),((bt>>1)&1),((bt>>2)&1),((bt>>3)&1),((bt>>4)&1),((bt>>5)&1),((bt>>6)&1),((bt>>7)&1)] -at least in the mode that I read those in #ifndef SYNC_16BIT # define SYNC_16BIT 0xB24D #endif static void FelicaFrameReset(void) { FelicaFrame.state = STATE_UNSYNCD; FelicaFrame.posCnt = 0; FelicaFrame.crc_ok = false; FelicaFrame.byte_offset = 0; } static void FelicaFrameinit(uint8_t *data) { FelicaFrame.framebytes = data; FelicaFrameReset(); } //shift byte into frame, reversing it at the same time static void shiftInByte(uint8_t bt) { uint8_t j; for (j = 0; j < FelicaFrame.byte_offset; j++) { FelicaFrame.framebytes[FelicaFrame.posCnt] = (FelicaFrame.framebytes[FelicaFrame.posCnt] << 1) + (bt & 1); bt >>= 1; } FelicaFrame.posCnt++; FelicaFrame.rem_len--; for (j = FelicaFrame.byte_offset; j < 8; j++) { FelicaFrame.framebytes[FelicaFrame.posCnt] = (FelicaFrame.framebytes[FelicaFrame.posCnt] << 1) + (bt & 1); bt >>= 1; } } static void Process18092Byte(uint8_t bt) { switch (FelicaFrame.state) { case STATE_UNSYNCD: { //almost any nonzero byte can be start of SYNC. SYNC should be preceded by zeros, but that is not always the case if (bt > 0) { FelicaFrame.shiftReg = reflect8(bt); FelicaFrame.state = STATE_TRYING_SYNC; } break; } case STATE_TRYING_SYNC: { if (bt == 0) { //desync FelicaFrame.shiftReg = bt; FelicaFrame.state = STATE_UNSYNCD; } else { for (uint8_t i = 0; i < 8; i++) { if (FelicaFrame.shiftReg == SYNC_16BIT) { //SYNC done! FelicaFrame.state = STATE_GET_LENGTH; FelicaFrame.framebytes[0] = 0xb2; FelicaFrame.framebytes[1] = 0x4d; FelicaFrame.byte_offset = i; //shift in remaining byte, slowly... for (uint8_t j = i; j < 8; j++) { FelicaFrame.framebytes[2] = (FelicaFrame.framebytes[2] << 1) + (bt & 1); bt >>= 1; } FelicaFrame.posCnt = 2; if (i == 0) break; } FelicaFrame.shiftReg = (FelicaFrame.shiftReg << 1) + (bt & 1); bt >>= 1; } //that byte was last byte of sync if (FelicaFrame.shiftReg == SYNC_16BIT) { //Force SYNC on next byte FelicaFrame.state = STATE_GET_LENGTH; FelicaFrame.framebytes[0] = 0xb2; FelicaFrame.framebytes[1] = 0x4d; FelicaFrame.byte_offset = 0; FelicaFrame.posCnt = 1; } } break; } case STATE_GET_LENGTH: { shiftInByte(bt); FelicaFrame.rem_len = FelicaFrame.framebytes[2] - 1; FelicaFrame.len = FelicaFrame.framebytes[2] + 4; //with crc and sync FelicaFrame.state = STATE_GET_DATA; break; } case STATE_GET_DATA: { shiftInByte(bt); if (FelicaFrame.rem_len <= 0) { FelicaFrame.state = STATE_GET_CRC; FelicaFrame.rem_len = 2; } break; } case STATE_GET_CRC: { shiftInByte(bt); if (FelicaFrame.rem_len <= 0) { FelicaFrame.rem_len = 0; // skip sync 2bytes. IF ok, residue should be 0x0000 FelicaFrame.crc_ok = check_crc(CRC_FELICA, FelicaFrame.framebytes + 2, FelicaFrame.len - 2); FelicaFrame.state = STATE_FULL; } break; } case STATE_FULL: //ignore byte. Don't forget to clear frame to receive next one... default: break; } } /* Perform FeliCa polling card * Currently does NOT do any collision handling. * It expects 0-1 cards in the device's range. * return 0 if selection was successful */ static uint8_t felica_select_card(felica_card_select_t *card) { // POLL command // 0xB2 0x4B = sync code // 0x06 = len // 0x00 = rfu // 0xff = system code service // 0xff = system code service // 0x00 = request code // b7 = automatic switching of data rate // b6-b2 = reserved // b1 = fc/32 (414kbps) // b0 = fc/64 (212kbps) // 0x00 = timeslot // 0x09 0x21 = crc static uint8_t poll[10] = {0xb2, 0x4d, 0x06, FELICA_POLL_REQ, 0xFF, 0xFF, 0x00, 0x00, 0x09, 0x21}; int len = 20; // We try 20 times, or if answer was received. do { // end-of-reception response packet data, wait approx. 501μs // end-of-transmission command packet data, wait approx. 197μs // polling card TransmitFor18092_AsReader(poll, sizeof(poll), NULL, 1, 0); // polling card, break if success if (WaitForFelicaReply(1024) && FelicaFrame.framebytes[3] == FELICA_POLL_ACK) break; WDT_HIT(); } while (--len); // timed-out if (len == 0) { if (DBGLEVEL >= DBG_DEBUG) Dbprintf("Error: Time out card selection!"); return 1; } // wrong answer if (FelicaFrame.framebytes[3] != FELICA_POLL_ACK) { if (DBGLEVEL >= DBG_DEBUG) Dbprintf("Error: Wrong answer selecting card!"); return 2; } // VALIDATE CRC residue is 0, hence if crc is a value it failed. if (!check_crc(CRC_FELICA, FelicaFrame.framebytes + 2, FelicaFrame.len - 2)) { if (DBGLEVEL >= DBG_DEBUG) { Dbprintf("Error: CRC check failed!"); Dbprintf("CRC check was done on Frame: "); Dbhexdump(FelicaFrame.len - 2, FelicaFrame.framebytes + 2, 0); } return 3; } if (DBGLEVEL >= DBG_DEBUG) Dbprintf("Card selection successful!"); // copy UID // idm 8 if (card) { memcpy(card->IDm, FelicaFrame.framebytes + 4, 8); memcpy(card->PMm, FelicaFrame.framebytes + 4 + 8, 8); //memcpy(card->servicecode, FelicaFrame.framebytes + 4 + 8 + 8, 2); memcpy(card->code, card->IDm, 2); memcpy(card->uid, card->IDm + 2, 6); memcpy(card->iccode, card->PMm, 2); memcpy(card->mrt, card->PMm + 2, 6); if (DBGLEVEL >= DBG_DEBUG) { Dbprintf("Received Frame: "); Dbhexdump(FelicaFrame.len, FelicaFrame.framebytes, 0); } } // more status bytes? return 0; } // poll-0: 0xb2,0x4d,0x06,0x00,0xff,0xff,0x00,0x00,0x09,0x21, // resp: 0xb2,0x4d,0x12,0x01,0x01,0x2e,0x3d,0x17,0x26,0x47,0x80,0x95,0x00,0xf1,0x00,0x00,0x00,0x01,0x43,0x00,0xb3,0x7f, // poll-1 (reply with available system codes - NFC Tag3 specs, IIRC): 0xb2,0x4d,0x06,0x00,0xff,0xff,0x01,0x00,0x3a,0x10 // resp: 0xb2,0x4d,0x14,0x01, 0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX, 0x00,0xf1,0x00,0x00,0x00,0x01,0x43,0x00, 0x88,0xb4,0x0c,0xe2, // page-req: 0xb2,0x4d,0x10,0x06, 0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX, 0x01, 0x0b,0x00, 0x01, 0x80,0x00, 0x2e,0xb3, // page-req: 0x06, IDm(8), ServiceNum(1),Slist(2*num) BLocknum (1) BLockids(2-3*num) // page-resp: 0xb2,0x4d,0x1d,0x07, 0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX, 0x00, 0x00, 0x01, 0x10,0x04,0x01,0x00,0x0d,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x23, 0xcb,0x6e, // builds a readblock frame for felica lite(s). Using SERVICE: SERVICE_FELICA_LITE_READONLY // Felica standard has a different file system, AFAIK, // 8-byte IDm, number of blocks, blocks numbers // number of blocks limited to 4 for FelicaLite(S) static void BuildFliteRdblk(uint8_t *idm, int blocknum, uint16_t *blocks) { if (blocknum > 4 || blocknum <= 0) Dbprintf("Invalid number of blocks, %d != 4", blocknum); uint8_t c = 0, i = 0; // Sync bytes frameSpace[c++] = 0xb2; frameSpace[c++] = 0x4d; c++; //set length later frameSpace[c++] = FELICA_RDBLK_REQ; //command number //card IDm, from poll frameSpace[c++] = idm[0]; frameSpace[c++] = idm[1]; frameSpace[c++] = idm[2]; frameSpace[c++] = idm[3]; frameSpace[c++] = idm[4]; frameSpace[c++] = idm[5]; frameSpace[c++] = idm[6]; frameSpace[c++] = idm[7]; //number of services frameSpace[c++] = 0x01; //service code frameSpace[c++] = (SERVICE_FELICA_LITE_READONLY >> 8); frameSpace[c++] = SERVICE_FELICA_LITE_READONLY & 0xFF; //number of blocks frameSpace[c++] = blocknum; for (i = 0; i < blocknum; i++) { //3-byte block if (blocks[i] >= 256) { frameSpace[c++] = 0x00; frameSpace[c++] = (blocks[i] >> 8); //block number, little endian.... frameSpace[c++] = (blocks[i] & 0xff); } else { frameSpace[c++] = 0x80; frameSpace[c++] = blocks[i]; } } //set length frameSpace[2] = c - 2; //Add CRC AddCrc(frameSpace + 2, c - 2); } static void TransmitFor18092_AsReader(uint8_t *frame, int len, uint32_t *timing, uint8_t power, uint8_t highspeed) { uint16_t flags = FPGA_MAJOR_MODE_HF_ISO18092; if (power) flags |= FPGA_HF_ISO18092_FLAG_READER; if (highspeed) flags |= FPGA_HF_ISO18092_FLAG_424K; FpgaWriteConfWord(flags); uint32_t curr_transfer_time = ((MAX(felica_nexttransfertime, GetCountSspClk()) & 0xfffffff8) + 8); while (GetCountSspClk() < curr_transfer_time) {}; felica_lasttime_prox2air_start = curr_transfer_time; // preamble // sending 0x00 0x00 0x00 0x00 0x00 0x00 uint16_t c = 0; while (c < 6) { // keep tx buffer in a defined state anyway. if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { AT91C_BASE_SSC->SSC_THR = 0x00; c++; } } // sending data with sync bytes c = 0; if (DBGLEVEL >= DBG_DEBUG) { Dbprintf("Sending frame:"); Dbhexdump(len, frame, 0); } while (c < len) { // Put byte into tx holding register as soon as it is ready if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) { AT91C_BASE_SSC->SSC_THR = frame[c++]; } } /**/ while (!(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY))) {}; AT91C_BASE_SSC->SSC_THR = 0x00; //minimum delay while (!(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY))) {}; AT91C_BASE_SSC->SSC_THR = 0x00; //spin /**/ // log LogTrace( frame, len, (felica_lasttime_prox2air_start << 4) + DELAY_ARM2AIR_AS_READER, ((felica_lasttime_prox2air_start + felica_lasttime_prox2air_start) << 4) + DELAY_ARM2AIR_AS_READER, NULL, true ); felica_nexttransfertime = MAX(felica_nexttransfertime, felica_lasttime_prox2air_start + FELICA_REQUEST_GUARD_TIME); } // Wait for tag reply // stop when button is pressed // or return TRUE when command is captured bool WaitForFelicaReply(uint16_t maxbytes) { if (DBGLEVEL >= DBG_DEBUG) Dbprintf("WaitForFelicaReply Start"); uint32_t c = 0; // power, no modulation FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO18092 | FPGA_HF_ISO18092_FLAG_READER | FPGA_HF_ISO18092_FLAG_NOMOD); FelicaFrameReset(); // clear RXRDY: uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR; (void)b; uint32_t timeout = iso18092_get_timeout(); for (;;) { WDT_HIT(); if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { b = (uint8_t)(AT91C_BASE_SSC->SSC_RHR); Process18092Byte(b); if (FelicaFrame.state == STATE_FULL) { felica_nexttransfertime = MAX(felica_nexttransfertime, (GetCountSspClk() & 0xfffffff8) - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER) / 16 + FELICA_FRAME_DELAY_TIME); LogTrace( FelicaFrame.framebytes, FelicaFrame.len, ((GetCountSspClk() & 0xfffffff8) << 4) - DELAY_AIR2ARM_AS_READER - timeout, ((GetCountSspClk() & 0xfffffff8) << 4) - DELAY_AIR2ARM_AS_READER, NULL, false ); if (DBGLEVEL >= DBG_DEBUG) Dbprintf("All bytes received! STATE_FULL"); return true; } else if (c++ > timeout && (FelicaFrame.state == STATE_UNSYNCD || FelicaFrame.state == STATE_TRYING_SYNC)) { if (DBGLEVEL >= DBG_DEBUG) Dbprintf("Error: Timeout! STATE_UNSYNCD"); return false; } } } } // Set up FeliCa communication (similar to iso14443a_setup) // field is setup for "Sending as Reader" static void iso18092_setup(uint8_t fpga_minor_mode) { if (DBGLEVEL >= DBG_DEBUG) Dbprintf("Start iso18092_setup"); LEDsoff(); FpgaDownloadAndGo(FPGA_BITSTREAM_HF_FELICA); // allocate command receive buffer BigBuf_free(); BigBuf_Clear_ext(false); // Initialize Demod and Uart structs // DemodInit(BigBuf_malloc(MAX_FRAME_SIZE)); FelicaFrameinit(BigBuf_malloc(FELICA_MAX_FRAME_SIZE)); felica_nexttransfertime = 2 * DELAY_ARM2AIR_AS_READER; iso18092_set_timeout(2120); // 106 * 20ms maximum start-up time of card init_table(CRC_FELICA); // connect Demodulated Signal to ADC: SetAdcMuxFor(GPIO_MUXSEL_HIPKD); // Set up the synchronous serial port FpgaSetupSsc(FPGA_MAJOR_MODE_HF_ISO18092); // LSB transfer. Remember to set it back to MSB with AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); // Signal field is on with the appropriate LED FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO18092 | fpga_minor_mode); //20.4 ms generate field, start sending polling command afterwars. SpinDelay(100); // Start the timer StartCountSspClk(); LED_D_ON(); } static void felica_reset_frame_mode(void) { switch_off(); //Resetting Frame mode (First set in fpgaloader.c) AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); } //----------------------------------------------------------------------------- // RAW FeliCa commands. Send out commands and store answers. //----------------------------------------------------------------------------- // arg0 FeliCa flags // arg1 len of commandbytes // d.asBytes command bytes to send void felica_sendraw(PacketCommandNG *c) { if (DBGLEVEL >= DBG_DEBUG) Dbprintf("FeliCa_sendraw Enter"); felica_command_t param = c->oldarg[0]; size_t len = c->oldarg[1] & 0xffff; uint8_t *cmd = c->data.asBytes; uint32_t arg0; felica_card_select_t card; if ((param & FELICA_CONNECT)) if (DBGLEVEL >= DBG_DEBUG) Dbprintf("Clear trace"); clear_trace(); set_tracing(true); iso18092_setup(FPGA_HF_ISO18092_FLAG_READER | FPGA_HF_ISO18092_FLAG_NOMOD); if ((param & FELICA_CONNECT)) { // notify client selecting status. // if failed selecting, turn off antenna and quite. if (!(param & FELICA_NO_SELECT)) { arg0 = felica_select_card(&card); reply_mix(CMD_ACK, arg0, sizeof(card.uid), 0, &card, sizeof(felica_card_select_t)); if (arg0 > 0) { if (DBGLEVEL >= DBG_DEBUG) Dbprintf("Error: Failed selecting card! "); felica_reset_frame_mode(); return; } } } else { if (DBGLEVEL >= DBG_DEBUG) Dbprintf("No card selection"); } if ((param & FELICA_RAW)) { // 2 sync, 1 len, 2crc == 5 uint8_t *buf = BigBuf_malloc(len + 5); // add sync bits buf[0] = 0xb2; buf[1] = 0x4d; buf[2] = len; // copy command memcpy(buf + 2, cmd, len); if ((param & FELICA_APPEND_CRC)) { // Don't append crc on empty bytearray... if (len > 0) { AddCrc(buf, len); } } if (DBGLEVEL >= DBG_DEBUG) { Dbprintf("Transmit Frame (no CRC shown):"); Dbhexdump(len, buf, 0); Dbprintf("Buffer Length: %i", buf[2] + 4); }; TransmitFor18092_AsReader(buf, buf[2] + 4, NULL, 1, 0); arg0 = WaitForFelicaReply(1024); if (DBGLEVEL >= DBG_DEBUG) { Dbprintf("Received Frame Code: %d", arg0); Dbhexdump(FelicaFrame.len, FelicaFrame.framebytes, 0); }; uint32_t result = reply_mix(CMD_ACK, FelicaFrame.len, arg0, 0, FelicaFrame.framebytes, FelicaFrame.len); if (result) { Dbprintf("Reply to Client Error Code: %i", result); } } if ((param & FELICA_NO_DISCONNECT)) { Dbprintf("Disconnect"); } if (DBGLEVEL >= DBG_DEBUG) Dbprintf("FeliCa_sendraw Exit"); felica_reset_frame_mode(); return; } void felica_sniff(uint32_t samplesToSkip, uint32_t triggersToSkip) { int remFrames = (samplesToSkip) ? samplesToSkip : 0; Dbprintf("Sniff Felica: Getting first %d frames, Skipping after %d triggers.\n", samplesToSkip, triggersToSkip); clear_trace(); set_tracing(true); iso18092_setup(FPGA_HF_ISO18092_FLAG_NOMOD); LED_D_ON(); uint16_t numbts = 0; int trigger_cnt = 0; uint32_t timeout = iso18092_get_timeout(); bool isReaderFrame = true; while (!BUTTON_PRESS()) { WDT_HIT(); if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { uint8_t dist = (uint8_t)(AT91C_BASE_SSC->SSC_RHR); Process18092Byte(dist); if ((dist >= 178) && (++trigger_cnt > triggersToSkip)) { Dbprintf("triggersToSkip kicked %d", dist); break; } if (FelicaFrame.state == STATE_FULL) { if ((FelicaFrame.framebytes[3] % 2) == 0) { isReaderFrame = true; // All Reader Frames are even and all Tag frames are odd } else { isReaderFrame = false; } remFrames--; if (remFrames <= 0) { Dbprintf("Stop Sniffing - samplesToSkip reached!"); break; } LogTrace(FelicaFrame.framebytes, FelicaFrame.len, ((GetCountSspClk() & 0xfffffff8) << 4) - DELAY_AIR2ARM_AS_READER - timeout, ((GetCountSspClk() & 0xfffffff8) << 4) - DELAY_AIR2ARM_AS_READER, NULL, isReaderFrame ); numbts += FelicaFrame.len; FelicaFrameReset(); } } } switch_off(); //reset framing AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); set_tracelen(numbts); set_tracelen(BigBuf_max_traceLen()); Dbprintf("Felica sniffing done, tracelen: %i, use hf list felica for annotations", BigBuf_get_traceLen()); reply_mix(CMD_ACK, 1, numbts, 0, 0, 0); LED_D_OFF(); } #define R_POLL0_LEN 0x16 #define R_POLL1_LEN 0x18 #define R_READBLK_LEN 0x21 //simulate NFC Tag3 card - for now only poll response works // second half (4 bytes) of NDEF2 goes into nfcid2_0, first into nfcid2_1 void felica_sim_lite(uint64_t uid) { int i, curlen = 0; uint8_t *curresp = 0; uint8_t ndef[8]; num_to_bytes(uid, 8, ndef); //prepare our 3 responses... uint8_t resp_poll0[R_POLL0_LEN] = { 0xb2, 0x4d, 0x12, FELICA_POLL_ACK, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf1, 0x00, 0x00, 0x00, 0x01, 0x43, 0x00, 0xb3, 0x7f}; uint8_t resp_poll1[R_POLL1_LEN] = { 0xb2, 0x4d, 0x14, FELICA_POLL_ACK, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf1, 0x00, 0x00, 0x00, 0x01, 0x43, 0x00, 0x88, 0xb4, 0xb3, 0x7f}; uint8_t resp_readblk[R_READBLK_LEN] = { 0xb2, 0x4d, 0x1d, FELICA_RDBLK_ACK, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x10, 0x04, 0x01, 0x00, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x23, 0xcb, 0x6e}; //NFC tag 3/ ISo technically. Many overlapping standards DbpString("Felica Lite-S sim start"); Dbprintf("NDEF2 UID: %02x %02x %02x %02x %02x %02x %02x %02x", ndef[0], ndef[1], ndef[2], ndef[3], ndef[4], ndef[5], ndef[6], ndef[7] ); //fill in blanks for (i = 0; i < 8; i++) { resp_poll0[i + 4] = ndef[i]; resp_poll1[i + 4] = ndef[i]; resp_readblk[i + 4] = ndef[i]; } //calculate and set CRC AddCrc(resp_poll0, resp_poll0[2]); AddCrc(resp_poll1, resp_poll1[2]); AddCrc(resp_readblk, resp_readblk[2]); iso18092_setup(FPGA_HF_ISO18092_FLAG_NOMOD); bool listenmode = true; //uint32_t frtm = GetCountSspClk(); for (;;) { if (BUTTON_PRESS()) break; WDT_HIT(); if (listenmode) { //waiting for request... if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) { uint8_t dist = (uint8_t)(AT91C_BASE_SSC->SSC_RHR); //frtm = GetCountSspClk(); Process18092Byte(dist); if (FelicaFrame.state == STATE_FULL) { if (FelicaFrame.crc_ok) { if (FelicaFrame.framebytes[2] == 6 && FelicaFrame.framebytes[3] == 0) { //polling... there are two types of polling we answer to if (FelicaFrame.framebytes[6] == 0) { curresp = resp_poll0; curlen = R_POLL0_LEN; listenmode = false; } if (FelicaFrame.framebytes[6] == 1) { curresp = resp_poll1; curlen = R_POLL1_LEN; listenmode = true; } } if (FelicaFrame.framebytes[2] > 5 && FelicaFrame.framebytes[3] == 0x06) { //we should rebuild it depending on page size, but... //Let's see first curresp = resp_readblk; curlen = R_READBLK_LEN; listenmode = false; } //clear frame FelicaFrameReset(); } else { //frame invalid, clear it out to allow for the next one FelicaFrameReset(); } } } } if (!listenmode) { //trying to answer... here to start answering immediately. //this one is a bit finicky. Seems that being a bit late is better than earlier //TransmitFor18092_AsReader(curresp, curlen, frtm+512, 0, 0); TransmitFor18092_AsReader(curresp, curlen, NULL, 0, 0); //switch back FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO18092 | FPGA_HF_ISO18092_FLAG_NOMOD); FelicaFrameReset(); listenmode = true; curlen = 0; curresp = NULL; } } switch_off(); //reset framing AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); DbpString("Felica Lite-S sim end"); } #define RES_SVC_LEN 11 + 3 void felica_dump_lite_s(void) { uint8_t ndef[8]; uint8_t poll[10] = { 0xb2, 0x4d, 0x06, FELICA_POLL_REQ, 0xff, 0xff, 0x00, 0x00, 0x09, 0x21}; uint16_t liteblks[28] = {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x90, 0x91, 0x92, 0xa0}; // setup device. iso18092_setup(FPGA_HF_ISO18092_FLAG_READER | FPGA_HF_ISO18092_FLAG_NOMOD); uint8_t blknum; bool isOK = false; uint16_t cnt = 0, cntfails = 0; uint8_t *dest = BigBuf_get_addr(); while (!BUTTON_PRESS() && !data_available()) { WDT_HIT(); // polling? //TransmitFor18092_AsReader(poll, 10, GetCountSspClk()+512, 1, 0); TransmitFor18092_AsReader(poll, 10, NULL, 1, 0); if (WaitForFelicaReply(512) && FelicaFrame.framebytes[3] == FELICA_POLL_ACK) { // copy 8bytes to ndef. memcpy(ndef, FelicaFrame.framebytes + 4, 8); // for (c=0; c < 8; c++) // ndef[c] = FelicaFrame.framebytes[c+4]; for (blknum = 0; blknum < ARRAYLEN(liteblks);) { // block to read. BuildFliteRdblk(ndef, 1, &liteblks[blknum]); //TransmitFor18092_AsReader(frameSpace, frameSpace[2]+4, GetCountSspClk()+512, 1, 0); TransmitFor18092_AsReader(frameSpace, frameSpace[2] + 4, NULL, 1, 0); // read block if (WaitForFelicaReply(1024) && FelicaFrame.framebytes[3] == FELICA_RDBLK_ACK) { dest[cnt++] = liteblks[blknum]; uint8_t *fb = FelicaFrame.framebytes; dest[cnt++] = fb[12]; dest[cnt++] = fb[13]; //memcpy(dest+cnt, FelicaFrame.framebytes + 15, 16); //cnt += 16; for (uint8_t j = 0; j < 16; j++) dest[cnt++] = fb[15 + j]; blknum++; cntfails = 0; // // print raw log. // Dbprintf("LEN %u | Dump bytes count %u ", FelicaFrame.len, cnt); Dbhexdump(FelicaFrame.len, FelicaFrame.framebytes + 15, 0); } else { cntfails++; if (cntfails > 12) { blknum++; cntfails = 0; } } } isOK = true; break; } } switch_off(); //Resetting Frame mode (First set in fpgaloader.c) AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0); //setting tracelen - important! it was set by buffer overflow before set_tracelen(cnt); reply_mix(CMD_ACK, isOK, cnt, 0, 0, 0); }