# Proxmark3 command dump Some commands are available only if a Proxmark3 is actually connected. Check column "offline" for their availability. |command |offline |description |------- |------- |----------- |`auto `|N |`Automated detection process for unknown tags` |`clear `|Y |`Clear screen` |`help `|Y |`This help. Use ' help' for details of a particular command.` |`hints `|Y |`Turn hints on / off` |`msleep `|Y |`Add a pause in milliseconds` |`pref `|Y |`Edit preferences` |`rem `|Y |`Add a text line in log file` |`quit `|Y |`` |`exit `|Y |`Exit program` ### analyse { Analyse utils... } |command |offline |description |------- |------- |----------- |`analyse help `|Y |`This help` |`analyse lcr `|Y |`Generate final byte for XOR LRC` |`analyse crc `|Y |`Stub method for CRC evaluations` |`analyse chksum `|Y |`Checksum with adding, masking and one's complement` |`analyse dates `|Y |`Look for datestamps in a given array of bytes` |`analyse tea `|Y |`Crypto TEA test` |`analyse lfsr `|Y |`LFSR tests` |`analyse a `|Y |`num bits test` |`analyse nuid `|Y |`create NUID from 7byte UID` |`analyse demodbuff `|Y |`Load binary string to demodbuffer` |`analyse freq `|Y |`Calc wave lengths` |`analyse foo `|Y |`muxer` ### data { Plot window / data buffer manipulation... } |command |offline |description |------- |------- |----------- |`data help `|Y |`This help` |`data biphaserawdecode `|Y |`Biphase decode bin stream in DemodBuffer` |`data detectclock `|Y |`Detect ASK, FSK, NRZ, PSK clock rate of wave in GraphBuffer` |`data fsktonrz `|Y |`Convert fsk2 to nrz wave for alternate fsk demodulating (for weak fsk)` |`data manrawdecode `|Y |`Manchester decode binary stream in DemodBuffer` |`data modulation `|Y |`Identify LF signal for clock and modulation` |`data rawdemod `|Y |`Demodulate the data in the GraphBuffer and output binary` |`data askedgedetect `|Y |`[threshold] Adjust Graph for manual ASK demod using the length of sample differences to detect the edge of a wave (use 20-45, def:25)` |`data autocorr `|Y |`Autocorrelation over window` |`data dirthreshold `|Y |` -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev.` |`data decimate `|Y |`Decimate samples` |`data undecimate `|Y |`Un-decimate samples` |`data hide `|Y |`Hide graph window` |`data hpf `|Y |`Remove DC offset from trace` |`data iir `|Y |`apply IIR buttersworth filter on plotdata` |`data grid `|Y |` -- overlay grid on graph window, use zero value to turn off either` |`data ltrim `|Y |` -- Trim samples from left of trace` |`data mtrim `|Y |` -- Trim out samples from the specified start to the specified stop` |`data norm `|Y |`Normalize max/min to +/-128` |`data plot `|Y |`Show graph window (hit 'h' in window for keystroke help)` |`data rtrim `|Y |` -- Trim samples from right of trace` |`data setgraphmarkers `|Y |`[orange_marker] [blue_marker] (in graph window)` |`data shiftgraphzero `|Y |` -- Shift 0 for Graphed wave + or - shift value` |`data timescale `|Y |`Set a timescale to get a differential reading between the yellow and purple markers as time duration ` |`data zerocrossings `|Y |`Count time between zero-crossings` |`data convertbitstream `|Y |`Convert GraphBuffer's 0/1 values to 127 / -127` |`data getbitstream `|Y |`Convert GraphBuffer's >=1 values to 1 and <1 to 0` |`data bin2hex `|Y |`Converts binary to hexadecimal` |`data bitsamples `|N |`Get raw samples as bitstring` |`data clear `|Y |`Clears bigbuf on deviceside and graph window` |`data hexsamples `|N |` [] -- Dump big buffer as hex bytes` |`data hex2bin `|Y |`Converts hexadecimal to binary` |`data load `|Y |`Load contents of file into graph window` |`data ndef `|Y |`Decode NDEF records` |`data print `|Y |`print the data in the DemodBuffer` |`data samples `|N |`[512 - 40000] -- Get raw samples for graph window (GraphBuffer)` |`data save `|Y |`Save signal trace data (from graph window)` |`data setdebugmode `|Y |`<0|1|2> -- Set Debugging Level on client side` |`data tune `|N |`Measure tuning of device antenna. Results shown in graph window` ### emv { EMV ISO-14443 / ISO-7816... } |command |offline |description |------- |------- |----------- |`emv help `|Y |`This help` |`emv exec `|N |`Executes EMV contactless transaction.` |`emv pse `|N |`Execute PPSE. It selects 2PAY.SYS.DDF01 or 1PAY.SYS.DDF01 directory.` |`emv search `|N |`Try to select all applets from applets list and print installed applets.` |`emv select `|N |`Select applet.` |`emv gpo `|N |`Execute GetProcessingOptions.` |`emv readrec `|N |`Read files from card.` |`emv genac `|N |`Generate ApplicationCryptogram.` |`emv challenge `|N |`Generate challenge.` |`emv intauth `|N |`Internal authentication.` |`emv scan `|N |`Scan EMV card and save it contents to json file for emulator.` |`emv test `|Y |`Crypto logic test.` |`emv list `|Y |`List ISO7816 history` |`emv roca `|N |`Extract public keys and run ROCA test` ### hf { High frequency commands... } |command |offline |description |------- |------- |----------- |`hf help `|Y |`This help` |`hf list `|Y |`List protocol data in trace buffer` |`hf plot `|N |`Plot signal` |`hf tune `|N |`Continuously measure HF antenna tuning` |`hf search `|Y |`Search for known HF tags` |`hf sniff `|N |` Generic HF Sniff` ### hf 14a { ISO14443A RFIDs... } |command |offline |description |------- |------- |----------- |`hf 14a help `|Y |`This help` |`hf 14a list `|Y |`List ISO 14443-a history` |`hf 14a info `|N |`Tag information` |`hf 14a reader `|N |`Act like an ISO14443-a reader` |`hf 14a cuids `|N |` Collect n>0 ISO14443-a UIDs in one go` |`hf 14a sim `|N |` -- Simulate ISO 14443-a tag` |`hf 14a sniff `|N |`sniff ISO 14443-a traffic` |`hf 14a apdu `|N |`Send ISO 14443-4 APDU to tag` |`hf 14a chaining `|N |`Control ISO 14443-4 input chaining` |`hf 14a raw `|N |`Send raw hex data to tag` |`hf 14a antifuzz `|N |`Fuzzing the anticollision phase. Warning! Readers may react strange` |`hf 14a config `|N |`Configure 14a settings (use with caution)` ### hf 14b { ISO14443B RFIDs... } |command |offline |description |------- |------- |----------- |`hf 14b help `|Y |`This help` |`hf 14b apdu `|N |`Send ISO 14443-4 APDU to tag` |`hf 14b dump `|N |`Read all memory pages of an ISO14443-B tag, save to file` |`hf 14b info `|N |`Tag information` |`hf 14b list `|Y |`List ISO 14443B history` |`hf 14b ndef `|N |`Read NDEF file on tag` |`hf 14b raw `|N |`Send raw hex data to tag` |`hf 14b reader `|N |`Act as a 14443B reader to identify a tag` |`hf 14b sim `|N |`Fake ISO 14443B tag` |`hf 14b sniff `|N |`Eavesdrop ISO 14443B` |`hf 14b rdbl `|N |`Read SRI512/SRIX4x block` |`hf 14b sriwrite `|N |`Write data to a SRI512 | SRIX4K tag` ### hf 15 { ISO15693 RFIDs... } |command |offline |description |------- |------- |----------- |`hf 15 help `|Y |`This help` |`hf 15 list `|Y |`List ISO15693 history` |`hf 15 demod `|Y |`Demodulate ISO15693 from tag` |`hf 15 dump `|N |`Read all memory pages of an ISO15693 tag, save to file` |`hf 15 info `|N |`Tag information` |`hf 15 sniff `|N |`Sniff ISO15693 traffic` |`hf 15 raw `|N |`Send raw hex data to tag` |`hf 15 rdbl `|N |`Read a block` |`hf 15 reader `|N |`Act like an ISO15693 reader` |`hf 15 readmulti `|N |`Reads multiple Blocks` |`hf 15 restore `|N |`Restore from file to all memory pages of an ISO15693 tag` |`hf 15 samples `|N |`Acquire Samples as Reader (enables carrier, sends inquiry)` |`hf 15 sim `|N |`Fake an ISO15693 tag` |`hf 15 wrbl `|N |`Write a block` |`hf 15 findafi `|N |`Brute force AFI of an ISO15693 tag` |`hf 15 writeafi `|N |`Writes the AFI on an ISO15693 tag` |`hf 15 writedsfid `|N |`Writes the DSFID on an ISO15693 tag` |`hf 15 csetuid `|N |`Set UID for magic Chinese card` ### hf epa { German Identification Card... } |command |offline |description |------- |------- |----------- |`hf epa help `|Y |`This help` |`hf epa cnonces `|N |` Acquire n>0 encrypted PACE nonces of size m>0 with d sec pauses` |`hf epa preplay `|N |` Perform PACE protocol by replaying given APDUs` ### hf felica { ISO18092 / FeliCa RFIDs... } |command |offline |description |------- |------- |----------- |`hf felica help `|Y |`This help` |`hf felica list `|Y |`List ISO 18092/FeliCa history` |`hf felica reader `|N |`Act like an ISO18092/FeliCa reader` |`hf felica sniff `|N |`Sniff ISO 18092/FeliCa traffic` |`hf felica raw `|N |`Send raw hex data to tag` |`hf felica rdunencrypted`|N |`read Block Data from authentication-not-required Service.` |`hf felica wrunencrypted`|N |`write Block Data to an authentication-not-required Service.` |`hf felica rqservice `|N |`verify the existence of Area and Service, and to acquire Key Version.` |`hf felica rqresponse `|N |`verify the existence of a card and its Mode.` |`hf felica scsvcode `|N |`acquire Area Code and Service Code.` |`hf felica rqsyscode `|N |`acquire System Code registered to the card.` |`hf felica auth1 `|N |`authenticate a card. Start mutual authentication with Auth1` |`hf felica auth2 `|N |`allow a card to authenticate a Reader/Writer. Complete mutual authentication` |`hf felica rqspecver `|N |`acquire the version of card OS.` |`hf felica resetmode `|N |`reset Mode to Mode 0.` |`hf felica litesim `|N |` - only reply to poll request` |`hf felica litedump `|N |`Wait for and try dumping FelicaLite` ### hf fido { FIDO and FIDO2 authenticators... } |command |offline |description |------- |------- |----------- |`hf fido help `|Y |`This help.` |`hf fido list `|N |`List ISO 14443A history` |`hf fido info `|N |`Info about FIDO tag.` |`hf fido reg `|N |`FIDO U2F Registration Message.` |`hf fido auth `|N |`FIDO U2F Authentication Message.` |`hf fido make `|N |`FIDO2 MakeCredential command.` |`hf fido assert `|N |`FIDO2 GetAssertion command.` ### hf iclass { ICLASS RFIDs... } |command |offline |description |------- |------- |----------- |`hf iclass help `|Y |`This help` |`hf iclass dump `|N |`[options..] Dump Picopass / iCLASS tag to file` |`hf iclass info `|Y |` Tag information` |`hf iclass list `|Y |` List iclass history` |`hf iclass rdbl `|N |`[options..] Read Picopass / iCLASS block` |`hf iclass reader `|N |` Act like an Picopass / iCLASS reader` |`hf iclass restore `|N |`[options..] Restore a dump file onto a Picopass / iCLASS tag` |`hf iclass sniff `|N |` Eavesdrop Picopass / iCLASS communication` |`hf iclass wrbl `|N |`[options..] Write Picopass / iCLASS block` |`hf iclass chk `|N |`[options..] Check keys` |`hf iclass loclass `|Y |`[options..] Use loclass to perform bruteforce reader attack` |`hf iclass lookup `|Y |`[options..] Uses authentication trace to check for key in dictionary file` |`hf iclass sim `|N |`[options..] Simulate iCLASS tag` |`hf iclass eload `|N |`[f ] Load Picopass / iCLASS dump file into emulator memory` |`hf iclass esave `|N |`[f ] Save emulator memory to file` |`hf iclass eview `|N |`[options..] View emulator memory` |`hf iclass calcnewkey `|Y |`[options..] Calc diversified keys (blocks 3 & 4) to write new keys` |`hf iclass encrypt `|Y |`[options..] Encrypt given block data` |`hf iclass decrypt `|Y |`[options..] Decrypt given block data or tag dump file` |`hf iclass managekeys `|Y |`[options..] Manage keys to use with iclass commands` |`hf iclass permutekey `|N |` Permute function from 'heart of darkness' paper` |`hf iclass view `|Y |`[options..] Display content from tag dump file` ### hf legic { LEGIC RFIDs... } |command |offline |description |------- |------- |----------- |`hf legic help `|Y |`This help` |`hf legic list `|Y |`List LEGIC history` |`hf legic reader `|N |`LEGIC Prime Reader UID and tag info` |`hf legic info `|N |`Display deobfuscated and decoded LEGIC Prime tag data` |`hf legic dump `|N |`Dump LEGIC Prime tag to binary file` |`hf legic restore `|N |`Restore a dump file onto a LEGIC Prime tag` |`hf legic rdbl `|N |`Read bytes from a LEGIC Prime tag` |`hf legic sim `|N |`Start tag simulator` |`hf legic wrbl `|N |`Write data to a LEGIC Prime tag` |`hf legic crc `|Y |`Calculate Legic CRC over given bytes` |`hf legic eload `|Y |`Load binary dump to emulator memory` |`hf legic esave `|Y |`Save emulator memory to binary file` |`hf legic wipe `|N |`Wipe a LEGIC Prime tag` ### hf lto { LTO Cartridge Memory RFIDs... } |command |offline |description |------- |------- |----------- |`hf lto help `|Y |`This help` |`hf lto dump `|N |`Dump LTO-CM tag to file` |`hf lto restore `|N |`Restore dump file to LTO-CM tag` |`hf lto info `|N |`Tag information` |`hf lto rdbl `|N |`Read block` |`hf lto wrbl `|N |`Write block` |`hf lto list `|Y |`List LTO-CM history` ### hf mf { MIFARE RFIDs... } |command |offline |description |------- |------- |----------- |`hf mf help `|Y |`This help` |`hf mf list `|Y |`List MIFARE history` |`hf mf darkside `|N |`Darkside attack` |`hf mf nested `|N |`Nested attack` |`hf mf hardnested `|Y |`Nested attack for hardened MIFARE Classic cards` |`hf mf staticnested `|N |`Nested attack against static nonce MIFARE Classic cards` |`hf mf autopwn `|N |`Automatic key recovery tool for MIFARE Classic` |`hf mf nack `|N |`Test for MIFARE NACK bug` |`hf mf chk `|N |`Check keys` |`hf mf fchk `|N |`Check keys fast, targets all keys on card` |`hf mf decrypt `|Y |`[nt] [ar_enc] [at_enc] [data] - to decrypt sniff or trace` |`hf mf supercard `|N |`Extract info from a `super card`` |`hf mf auth4 `|N |`ISO14443-4 AES authentication` |`hf mf dump `|N |`Dump MIFARE Classic tag to binary file` |`hf mf mad `|N |`Checks and prints MAD` |`hf mf ndef `|N |`Prints NDEF records from card` |`hf mf personalize `|N |`Personalize UID (MIFARE Classic EV1 only)` |`hf mf rdbl `|N |`Read MIFARE Classic block` |`hf mf rdsc `|N |`Read MIFARE Classic sector` |`hf mf restore `|N |`Restore MIFARE Classic binary file to BLANK tag` |`hf mf setmod `|N |`Set MIFARE Classic EV1 load modulation strength` |`hf mf wrbl `|N |`Write MIFARE Classic block` |`hf mf sim `|N |`Simulate MIFARE card` |`hf mf ecfill `|N |`Fill simulator memory with help of keys from simulator` |`hf mf eclr `|N |`Clear simulator memory` |`hf mf egetblk `|N |`Get simulator memory block` |`hf mf egetsc `|N |`Get simulator memory sector` |`hf mf ekeyprn `|N |`Print keys from simulator memory` |`hf mf eload `|N |`Load from file emul dump` |`hf mf esave `|N |`Save to file emul dump` |`hf mf eset `|N |`Set simulator memory block` |`hf mf eview `|N |`View emul memory` |`hf mf cgetblk `|N |`Read block` |`hf mf cgetsc `|N |`Read sector` |`hf mf cload `|N |`Load dump` |`hf mf csave `|N |`Save dump from card into file or emulator` |`hf mf csetblk `|N |`Write block` |`hf mf csetuid `|N |`Set UID` |`hf mf cview `|N |`view card` |`hf mf cwipe `|N |`Wipe card to default UID/Sectors/Keys` |`hf mf gen3uid `|N |`Set UID without manufacturer block` |`hf mf gen3blk `|N |`Overwrite full manufacturer block` |`hf mf gen3freeze `|N |`Perma lock further UID changes` |`hf mf ice `|N |`collect MIFARE Classic nonces to file` ### hf mfp { MIFARE Plus RFIDs... } |command |offline |description |------- |------- |----------- |`hf mfp help `|Y |`This help` |`hf mfp info `|N |`Info about Mifare Plus tag` |`hf mfp wrp `|N |`Write Perso command` |`hf mfp initp `|N |`Fills all the card's keys` |`hf mfp commitp `|N |`Move card to SL1 or SL3 mode` |`hf mfp auth `|N |`Authentication` |`hf mfp rdbl `|N |`Read blocks` |`hf mfp rdsc `|N |`Read sectors` |`hf mfp wrbl `|N |`Write blocks` |`hf mfp chk `|N |`Check keys` |`hf mfp mad `|N |`Checks and prints MAD` |`hf mfp ndef `|N |`Prints NDEF records from card` ### hf mfu { MIFARE Ultralight RFIDs... } |command |offline |description |------- |------- |----------- |`hf mfu help `|Y |`This help` |`hf mfu info `|N |`Tag information` |`hf mfu dump `|N |`Dump Ultralight / Ultralight-C / NTAG tag to binary file` |`hf mfu restore `|N |`Restore a dump onto a MFU MAGIC tag` |`hf mfu eload `|N |`load Ultralight .eml dump file into emulator memory` |`hf mfu rdbl `|N |`Read block` |`hf mfu wrbl `|N |`Write block` |`hf mfu cauth `|N |`Authentication - Ultralight C` |`hf mfu setpwd `|N |`Set 3des password - Ultralight-C` |`hf mfu setuid `|N |`Set UID - MAGIC tags only` |`hf mfu sim `|N |`Simulate Ultralight from emulator memory` |`hf mfu gen `|Y |`Generate 3des mifare diversified keys` |`hf mfu pwdgen `|Y |`Generate pwd from known algos` |`hf mfu otptear `|N |`Tear-off test on OTP bits` |`hf mfu ndef `|N |`Prints NDEF records from card` ### hf mfdes { MIFARE Desfire RFIDs... } |command |offline |description |------- |------- |----------- |`hf mfdes help `|Y |`This help` |`hf mfdes auth `|N |`Tries a MIFARE DesFire Authentication` |`hf mfdes changekey `|N |`Change Key` |`hf mfdes chk `|N |`Check keys` |`hf mfdes enum `|N |`Tries enumerate all applications` |`hf mfdes formatpicc `|N |`Format PICC` |`hf mfdes getuid `|N |`Get random uid` |`hf mfdes info `|N |`Tag information` |`hf mfdes list `|Y |`List DESFire (ISO 14443A) history` |`hf mfdes createaid `|N |`Create Application ID` |`hf mfdes deleteaid `|N |`Delete Application ID` |`hf mfdes selectaid `|N |`Select Application ID` |`hf mfdes changevalue `|N |`Write value of a value file (credit/debit/clear)` |`hf mfdes clearfile `|N |`Clear record File` |`hf mfdes createfile `|N |`Create Standard/Backup File` |`hf mfdes createvaluefile`|N |`Create Value File` |`hf mfdes createrecordfile`|N |`Create Linear/Cyclic Record File` |`hf mfdes deletefile `|N |`Create Delete File` |`hf mfdes dump `|N |`Dump all files` |`hf mfdes getvalue `|N |`Get value of file` |`hf mfdes readdata `|N |`Read data from standard/backup/record file` |`hf mfdes writedata `|N |`Write data to standard/backup/record file` ### hf st { ST Rothult RFIDs... } |command |offline |description |------- |------- |----------- |`hf st help `|Y |`This help` |`hf st info `|N |`Tag information` |`hf st list `|Y |`List ISO 14443A/7816 history` |`hf st ndef `|Y |`read NDEF file on tag` |`hf st protect `|N |`change protection on tag` |`hf st pwd `|N |`change password on tag` |`hf st sim `|N |`Fake ISO 14443A/ST tag` ### hf thinfilm { Thinfilm RFIDs... } |command |offline |description |------- |------- |----------- |`hf thinfilm help `|Y |`This help` |`hf thinfilm info `|N |`Tag information` |`hf thinfilm list `|Y |`List NFC Barcode / Thinfilm history - not correct` |`hf thinfilm sim `|N |`Fake Thinfilm tag` ### hf topaz { TOPAZ (NFC Type 1) RFIDs... } |command |offline |description |------- |------- |----------- |`hf topaz help `|Y |`This help` |`hf topaz list `|Y |`List Topaz history` |`hf topaz info `|N |`Tag information` |`hf topaz reader `|N |`Act like a Topaz reader` |`hf topaz sim `|N |` -- Simulate Topaz tag` |`hf topaz sniff `|N |`Sniff Topaz reader-tag communication` |`hf topaz raw `|N |`Send raw hex data to tag` ### hf waveshare { Waveshare NFC ePaper... } |command |offline |description |------- |------- |----------- |`hf waveshare help `|Y |`This help` |`hf waveshare loadbmp `|N |`Load BMP file to Waveshare NFC ePaper` ### hw { Hardware commands... } |command |offline |description |------- |------- |----------- |`hw help `|Y |`This help` |`hw connect `|Y |`connect Proxmark3 to serial port` |`hw dbg `|N |`Set Proxmark3 debug level` |`hw detectreader `|N |`['l'|'h'] -- Detect external reader field (option 'l' or 'h' to limit to LF or HF)` |`hw fpgaoff `|N |`Set FPGA off` |`hw lcd `|N |` -- Send command/data to LCD` |`hw lcdreset `|N |`Hardware reset LCD` |`hw ping `|N |`Test if the Proxmark3 is responsive` |`hw readmem `|N |`[address] -- Read memory at decimal address from flash` |`hw reset `|N |`Reset the Proxmark3` |`hw setlfdivisor `|N |`<19 - 255> -- Drive LF antenna at 12MHz/(divisor+1)` |`hw setmux `|N |`Set the ADC mux to a specific value` |`hw standalone `|N |`Jump to the standalone mode` |`hw status `|N |`Show runtime status information about the connected Proxmark3` |`hw tearoff `|N |`Program a tearoff hook for the next command supporting tearoff` |`hw tia `|N |`Trigger a Timing Interval Acquisition to re-adjust the RealTimeCounter divider` |`hw tune `|N |`Measure antenna tuning` |`hw version `|N |`Show version information about the connected Proxmark3` ### lf { Low frequency commands... } |command |offline |description |------- |------- |----------- |`lf help `|Y |`This help` |`lf config `|N |`Get/Set config for LF sampling, bit/sample, decimation, frequency` |`lf cmdread `|N |`Modulate LF reader field to send command before read (all periods in microseconds)` |`lf read `|N |`Read LF tag` |`lf search `|Y |`Read and Search for valid known tag (in offline mode it you can load first then search)` |`lf sim `|N |`Simulate LF tag from buffer with optional GAP (in microseconds)` |`lf simask `|N |`Simulate LF ASK tag from demodbuffer or input` |`lf simfsk `|N |`Simulate LF FSK tag from demodbuffer or input` |`lf simpsk `|N |`Simulate LF PSK tag from demodbuffer or input` |`lf simbidir `|N |`Simulate LF tag (with bidirectional data transmission between reader and tag)` |`lf sniff `|N |`Sniff LF traffic between reader and tag` |`lf tune `|N |`Continuously measure LF antenna tuning` ### lf awid { AWID RFIDs... } |command |offline |description |------- |------- |----------- |`lf awid help `|Y |`this help` |`lf awid demod `|Y |`demodulate an AWID FSK tag from the GraphBuffer` |`lf awid reader `|N |`attempt to read and extract tag data` |`lf awid clone `|N |`clone AWID tag to T55x7 or Q5/T5555` |`lf awid sim `|N |`simulate AWID tag` |`lf awid brute `|N |`Bruteforce card number against reader` |`lf awid watch `|N |`continuously watch for cards. Reader mode` ### lf cotag { COTAG CHIPs... } |command |offline |description |------- |------- |----------- |`lf cotag help `|Y |`This help` |`lf cotag demod `|Y |`Tries to decode a COTAG signal` |`lf cotag reader `|N |`Attempt to read and extract tag data` ### lf destron { FDX-A Destron RFIDs... } |command |offline |description |------- |------- |----------- |`lf destron help `|Y |`This help` |`lf destron demod `|Y |`Demodulate an Destron tag from the GraphBuffer` |`lf destron reader `|N |`Attempt to read and extract tag data from the antenna` |`lf destron clone `|N |`Clone Destron tag to T55x7` |`lf destron sim `|N |`Simulate Destron tag` ### lf em { EM4X CHIPs & RFIDs... } |command |offline |description |------- |------- |----------- |`lf em help `|Y |`This help` |`lf em 410x_demod `|Y |`demodulate a EM410x tag from the GraphBuffer` |`lf em 410x_read `|N |`attempt to read and extract tag data` |`lf em 410x_sim `|N |`simulate EM410x tag` |`lf em 410x_brute `|N |`reader bruteforce attack by simulating EM410x tags` |`lf em 410x_watch `|N |`watches for EM410x 125/134 kHz tags (option 'h' for 134)` |`lf em 410x_spoof `|N |`watches for EM410x 125/134 kHz tags, and replays them. (option 'h' for 134)` |`lf em 410x_clone `|N |`write EM410x UID to T55x7 or Q5/T5555 tag` |`lf em 4x05_chk `|N |`Check passwords from dictionary` |`lf em 4x05_demod `|Y |`demodulate a EM4x05/EM4x69 tag from the GraphBuffer` |`lf em 4x05_dump `|N |`dump EM4x05/EM4x69 tag` |`lf em 4x05_wipe `|N |`wipe EM4x05/EM4x69 tag` |`lf em 4x05_info `|N |`tag information EM4x05/EM4x69` |`lf em 4x05_read `|N |`read word data from EM4x05/EM4x69` |`lf em 4x05_write `|N |`write word data to EM4x05/EM4x69` |`lf em 4x05_unlock `|N |`execute tear off against EM4x05/EM4x69` |`lf em 4x05_sniff `|Y |`Attempt to recover em4x05 commands from sample buffer` |`lf em 4x05_brute `|N |`Bruteforce password` |`lf em 4x50_dump `|N |`dump EM4x50 tag` |`lf em 4x50_info `|N |`tag information EM4x50` |`lf em 4x50_write `|N |`write word data to EM4x50` |`lf em 4x50_write_password`|N |`change password of EM4x50 tag` |`lf em 4x50_read `|N |`read word data from EM4x50` |`lf em 4x50_wipe `|N |`wipe data from EM4x50` ### lf fdxb { FDX-B RFIDs... } |command |offline |description |------- |------- |----------- |`lf fdxb help `|Y |`this help` |`lf fdxb demod `|Y |`demodulate a FDX-B ISO11784/85 tag from the GraphBuffer` |`lf fdxb reader `|N |`attempt to read at 134kHz and extract tag data` |`lf fdxb clone `|N |`clone animal ID tag to T55x7 or Q5/T5555` |`lf fdxb sim `|N |`simulate Animal ID tag` ### lf gallagher { GALLAGHER RFIDs... } |command |offline |description |------- |------- |----------- |`lf gallagher help `|Y |`This help` |`lf gallagher demod `|Y |`Demodulate an GALLAGHER tag from the GraphBuffer` |`lf gallagher reader `|N |`Attempt to read and extract tag data from the antenna` |`lf gallagher clone `|N |`clone GALLAGHER tag to T55x7` |`lf gallagher sim `|N |`simulate GALLAGHER tag` ### lf gproxii { Guardall Prox II RFIDs... } |command |offline |description |------- |------- |----------- |`lf gproxii help `|Y |`this help` |`lf gproxii demod `|Y |`demodulate a G Prox II tag from the GraphBuffer` |`lf gproxii reader `|N |`attempt to read and extract tag data from the antenna` |`lf gproxii clone `|N |`clone Guardall tag to T55x7 or Q5/T5555` |`lf gproxii sim `|N |`simulate Guardall tag` ### lf hid { HID Prox RFIDs... } |command |offline |description |------- |------- |----------- |`lf hid help `|Y |`this help` |`lf hid demod `|Y |`demodulate HID Prox tag from the GraphBuffer` |`lf hid read `|N |`attempt to read and extract tag data` |`lf hid clone `|N |`clone HID tag to T55x7` |`lf hid sim `|N |`simulate HID tag` |`lf hid brute `|N |`bruteforce card number against reader` |`lf hid watch `|N |`continuously watch for cards. Reader mode` ### lf hitag { Hitag CHIPs... } |command |offline |description |------- |------- |----------- |`lf hitag help `|Y |`This help` |`lf hitag list `|N |`List Hitag trace history` |`lf hitag info `|N |`Tag information` |`lf hitag reader `|N |`Act like a Hitag Reader` |`lf hitag sim `|N |`Simulate Hitag transponder` |`lf hitag sniff `|N |`Eavesdrop Hitag communication` |`lf hitag writer `|N |`Act like a Hitag Writer` |`lf hitag dump `|N |`Dump Hitag2 tag` |`lf hitag cc `|N |`Test all challenges` ### lf idteck { Idteck RFIDs... } |command |offline |description |------- |------- |----------- |`lf idteck help `|Y |`This help` |`lf idteck demod `|Y |`Demodulate an Idteck tag from the GraphBuffer` |`lf idteck reader `|N |`Attempt to read and Extract tag data from the antenna` ### lf indala { Indala RFIDs... } |command |offline |description |------- |------- |----------- |`lf indala help `|Y |`this help` |`lf indala demod `|Y |`demodulate an indala tag (PSK1) from GraphBuffer` |`lf indala altdemod `|Y |`alternative method to Demodulate samples for Indala 64 bit UID (option '224' for 224 bit)` |`lf indala reader `|N |`read an Indala Prox tag from the antenna` |`lf indala clone `|N |`clone Indala tag to T55x7 or Q5/T5555` |`lf indala sim `|N |`simulate Indala tag` ### lf io { ioProx RFIDs... } |command |offline |description |------- |------- |----------- |`lf io help `|Y |`this help` |`lf io demod `|Y |`demodulate an IOProx tag from the GraphBuffer` |`lf io reader `|N |`attempt to read and extract tag data` |`lf io clone `|N |`clone IOProx tag to T55x7 or Q5/T5555` |`lf io sim `|N |`simulate IOProx tag` |`lf io watch `|N |`continuously watch for cards. Reader mode` ### lf jablotron { Jablotron RFIDs... } |command |offline |description |------- |------- |----------- |`lf jablotron help `|Y |`This help` |`lf jablotron demod `|Y |`Demodulate an Jablotron tag from the GraphBuffer` |`lf jablotron reader `|N |`Attempt to read and extract tag data from the antenna` |`lf jablotron clone `|N |`clone jablotron tag to T55x7 or Q5/T5555` |`lf jablotron sim `|N |`simulate jablotron tag` ### lf keri { KERI RFIDs... } |command |offline |description |------- |------- |----------- |`lf keri help `|Y |`This help` |`lf keri demod `|Y |`Demodulate an KERI tag from the GraphBuffer` |`lf keri reader `|N |`Attempt to read and extract tag data from the antenna` |`lf keri clone `|N |`clone KERI tag to T55x7 or Q5/T5555` |`lf keri sim `|N |`simulate KERI tag` ### lf motorola { Motorola RFIDs... } |command |offline |description |------- |------- |----------- |`lf motorola help `|Y |`This help` |`lf motorola demod `|Y |`Demodulate an MOTOROLA tag from the GraphBuffer` |`lf motorola reader `|N |`Attempt to read and extract tag data from the antenna` |`lf motorola clone `|N |`clone MOTOROLA tag to T55x7` |`lf motorola sim `|N |`simulate MOTOROLA tag` ### lf nedap { Nedap RFIDs... } |command |offline |description |------- |------- |----------- |`lf nedap help `|Y |`This help` |`lf nedap demod `|Y |`Demodulate Nedap tag from the GraphBuffer` |`lf nedap generate `|Y |`Generate Nedap bitstream in DemodBuffer` |`lf nedap read `|N |`Attempt to read and extract tag data from the antenna` |`lf nedap clone `|N |`Clone Nedap tag to T55x7 or Q5/T5555` |`lf nedap sim `|N |`Simulate Nedap tag` ### lf nexwatch { NexWatch RFIDs... } |command |offline |description |------- |------- |----------- |`lf nexwatch help `|Y |`This help` |`lf nexwatch demod `|Y |`Demodulate a NexWatch tag (nexkey, quadrakey) from the GraphBuffer` |`lf nexwatch reader `|N |`Attempt to Read and Extract tag data from the antenna` |`lf nexwatch clone `|N |`clone NexWatch tag to T55x7` |`lf nexwatch sim `|N |`simulate NexWatch tag` ### lf noralsy { Noralsy RFIDs... } |command |offline |description |------- |------- |----------- |`lf noralsy help `|Y |`This help` |`lf noralsy demod `|Y |`Demodulate an Noralsy tag from the GraphBuffer` |`lf noralsy reader `|N |`Attempt to read and extract tag data from the antenna` |`lf noralsy clone `|N |`clone Noralsy tag to T55x7 or Q5/T5555` |`lf noralsy sim `|N |`simulate Noralsy tag` ### lf pac { PAC/Stanley RFIDs... } |command |offline |description |------- |------- |----------- |`lf pac help `|Y |`This help` |`lf pac demod `|Y |`Demodulate a PAC tag from the GraphBuffer` |`lf pac reader `|N |`Attempt to read and extract tag data from the antenna` |`lf pac clone `|N |`clone PAC tag to T55x7` |`lf pac sim `|N |`simulate PAC tag` ### lf paradox { Paradox RFIDs... } |command |offline |description |------- |------- |----------- |`lf paradox help `|Y |`This help` |`lf paradox demod `|Y |`Demodulate a Paradox FSK tag from the GraphBuffer` |`lf paradox reader `|N |`Attempt to read and Extract tag data from the antenna` |`lf paradox clone `|N |`clone paradox tag` |`lf paradox sim `|N |`simulate paradox tag` ### lf pcf7931 { PCF7931 CHIPs... } |command |offline |description |------- |------- |----------- |`lf pcf7931 help `|Y |`This help` |`lf pcf7931 read `|N |`Read content of a PCF7931 transponder` |`lf pcf7931 write `|N |`Write data on a PCF7931 transponder.` |`lf pcf7931 config `|Y |`Configure the password, the tags initialization delay and time offsets (optional)` ### lf presco { Presco RFIDs... } |command |offline |description |------- |------- |----------- |`lf presco help `|Y |`This help` |`lf presco demod `|Y |`demodulate Presco tag from the GraphBuffer` |`lf presco reader `|N |`Attempt to read and Extract tag data` |`lf presco clone `|N |`clone presco tag to T55x7 or Q5/T5555` |`lf presco sim `|N |`simulate presco tag` ### lf pyramid { Farpointe/Pyramid RFIDs... } |command |offline |description |------- |------- |----------- |`lf pyramid help `|Y |`this help` |`lf pyramid demod `|Y |`demodulate a Pyramid FSK tag from the GraphBuffer` |`lf pyramid reader `|N |`attempt to read and extract tag data` |`lf pyramid clone `|N |`clone pyramid tag to T55x7 or Q5/T5555` |`lf pyramid sim `|N |`simulate pyramid tag` ### lf securakey { Securakey RFIDs... } |command |offline |description |------- |------- |----------- |`lf securakey help `|Y |`This help` |`lf securakey demod `|Y |`Demodulate an Securakey tag from the GraphBuffer` |`lf securakey reader `|N |`Attempt to read and extract tag data from the antenna` |`lf securakey clone `|N |`clone Securakey tag to T55x7` |`lf securakey sim `|N |`simulate Securakey tag` ### lf ti { TI CHIPs... } |command |offline |description |------- |------- |----------- |`lf ti help `|Y |`This help` |`lf ti demod `|Y |`Demodulate raw bits for TI LF tag from the GraphBuffer` |`lf ti reader `|N |`Read and decode a TI 134 kHz tag` |`lf ti write `|N |`Write new data to a r/w TI 134 kHz tag` ### lf t55xx { T55xx CHIPs... } |command |offline |description |------- |------- |----------- |`lf t55xx help `|Y |`This help` |`lf t55xx clonehelp `|N |`Shows the available clone commands` |`lf t55xx config `|Y |`Set/Get T55XX configuration (modulation, inverted, offset, rate)` |`lf t55xx dangerraw `|N |`Sends raw bitstream. Dangerous, do not use!! b t ` |`lf t55xx detect `|Y |`[1] Try detecting the tag modulation from reading the configuration block.` |`lf t55xx deviceconfig `|N |`Set/Get T55XX device configuration (startgap, writegap, write0, write1, readgap` |`lf t55xx dump `|N |`[password] [o] Dump T55xx card Page 0 block 0-7. Optional [password], [override]` |`lf t55xx info `|Y |`[1] Show T55x7 configuration data (page 0/ blk 0)` |`lf t55xx p1detect `|N |`[1] Try detecting if this is a t55xx tag by reading page 1` |`lf t55xx read `|N |`b p [password] [o] [1] -- Read T55xx block data. Optional [p password], [override], [page1]` |`lf t55xx resetread `|N |`Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)` |`lf t55xx restore `|N |`f [p ] Restore T55xx card Page 0 / Page 1 blocks` |`lf t55xx trace `|Y |`[1] Show T55x7 traceability data (page 1/ blk 0-1)` |`lf t55xx wakeup `|N |`Send AOR wakeup command` |`lf t55xx write `|N |`b d p [password] [1] -- Write T55xx block data. Optional [p password], [page1]` |`lf t55xx bruteforce `|N |` Simple bruteforce attack to find password` |`lf t55xx chk `|N |`Check passwords from dictionary/flash` |`lf t55xx protect `|N |`Password protect tag` |`lf t55xx recoverpw `|N |`[password] Try to recover from bad password write from a cloner. Only use on PW protected chips!` |`lf t55xx sniff `|Y |`Attempt to recover T55xx commands from sample buffer` |`lf t55xx special `|N |`Show block changes with 64 different offsets` |`lf t55xx wipe `|N |`[q] Wipe a T55xx tag and set defaults (will destroy any data on tag)` ### lf viking { Viking RFIDs... } |command |offline |description |------- |------- |----------- |`lf viking help `|Y |`This help` |`lf viking demod `|Y |`Demodulate a Viking tag from the GraphBuffer` |`lf viking reader `|N |`Attempt to read and Extract tag data from the antenna` |`lf viking clone `|N |`clone Viking tag to T55x7 or Q5/T5555` |`lf viking sim `|N |`simulate Viking tag` ### lf visa2000 { Visa2000 RFIDs... } |command |offline |description |------- |------- |----------- |`lf visa2000 help `|Y |`This help` |`lf visa2000 demod `|Y |`demodulate an VISA2000 tag from the GraphBuffer` |`lf visa2000 reader `|N |`attempt to read and extract tag data from the antenna` |`lf visa2000 clone `|N |`clone Visa2000 tag to T55x7 or Q5/T5555` |`lf visa2000 sim `|N |`simulate Visa2000 tag` ### mem { Flash memory manipulation... } |command |offline |description |------- |------- |----------- |`mem help `|Y |`This help` |`mem baudrate `|N |`Set Flash memory Spi baudrate` |`mem spiffs `|N |`High level SPI FileSystem Flash manipulation` |`mem info `|N |`Flash memory information` |`mem load `|N |`Load data into flash memory` |`mem dump `|N |`Dump data from flash memory` |`mem wipe `|N |`Wipe data from flash memory` ### reveng { CRC calculations from RevEng software... } [=] reveng: no mode switch specified. Use reveng -h for help. ### smart { Smart card ISO-7816 commands... } |command |offline |description |------- |------- |----------- |`smart help `|Y |`This help` |`smart list `|N |`List ISO 7816 history` |`smart info `|N |`Tag information` |`smart reader `|N |`Act like an IS07816 reader` |`smart raw `|N |`Send raw hex data to tag` |`smart upgrade `|Y |`Upgrade sim module firmware` |`smart setclock `|N |`Set clock speed` |`smart brute `|N |`Bruteforce SFI` ### script { Scripting commands... } |command |offline |description |------- |------- |----------- |`script help `|Y |`Usage info` |`script list `|Y |`List available scripts` |`script run `|Y |` -- execute a script` ### trace { Trace manipulation... } |command |offline |description |------- |------- |----------- |`trace help `|Y |`This help` |`trace list `|Y |`List protocol data in trace buffer` |`trace load `|Y |`Load trace from file` |`trace save `|Y |`Save trace buffer to file` ### usart { USART commands... } |command |offline |description |------- |------- |----------- |`usart help `|Y |`This help` |`usart btpin `|N |`Change BT add-on PIN` |`usart btfactory `|N |`Reset BT add-on to factory settings` |`usart tx `|N |`Send string over USART` |`usart rx `|N |`Receive string over USART` |`usart txrx `|N |`Send string over USART and wait for response` |`usart txhex `|N |`Send bytes over USART` |`usart rxhex `|N |`Receive bytes over USART` |`usart config `|N |`Configure USART` ### wiegand { Wiegand format manipulation... } |command |offline |description |------- |------- |----------- |`wiegand help `|Y |`This help` |`wiegand list `|Y |`List available wiegand formats` |`wiegand encode `|Y |`Encode to wiegand raw hex` |`wiegand decode `|Y |`Convert raw hex to decoded wiegand format`