//-----------------------------------------------------------------------------
// Copyright (C) 2018 iceman
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Proxmark3 RDV40 Smartcard module commands
//-----------------------------------------------------------------------------
#include "cmdsmartcard.h"

static int CmdHelp(const char *Cmd);

int usage_sm_raw(void) {
	PrintAndLogEx(NORMAL, "Usage: sc raw [h|r|c] d <0A 0B 0C ... hex>");
	PrintAndLogEx(NORMAL, "       h          :  this help");
	PrintAndLogEx(NORMAL, "       r          :  do not read response");
	PrintAndLogEx(NORMAL, "       a          :  active signal field ON without select");
	PrintAndLogEx(NORMAL, "       s          :  active signal field ON with select");
	PrintAndLogEx(NORMAL, "       t          :  executes TLV decoder if it possible");
	PrintAndLogEx(NORMAL, "       d <bytes>  :  bytes to send");
	PrintAndLogEx(NORMAL, "");
	PrintAndLogEx(NORMAL, "Examples:");
	PrintAndLogEx(NORMAL, "        sc raw d 11223344");	
	return 0;
}
int usage_sm_reader(void) {
	PrintAndLogEx(NORMAL, "Usage: sc reader [h|s]");
	PrintAndLogEx(NORMAL, "       h          :  this help");
	PrintAndLogEx(NORMAL, "       s          :  silent (no messages)");
	PrintAndLogEx(NORMAL, "");
	PrintAndLogEx(NORMAL, "Examples:");
	PrintAndLogEx(NORMAL, "        sc reader");	
	return 0;
}
int usage_sm_info(void) {
	PrintAndLogEx(NORMAL, "Usage: s info [h|s]");
	PrintAndLogEx(NORMAL, "       h          :  this help");
	PrintAndLogEx(NORMAL, "       s          :  silent (no messages)");
	PrintAndLogEx(NORMAL, "");
	PrintAndLogEx(NORMAL, "Examples:");
	PrintAndLogEx(NORMAL, "        sc info");		
	return 0;
}
int usage_sm_upgrade(void) {
	PrintAndLogEx(NORMAL, "Upgrade firmware");
	PrintAndLogEx(NORMAL, "Usage:  sc upgrade f <file name>");
	PrintAndLogEx(NORMAL, "       h               :  this help");
	PrintAndLogEx(NORMAL, "       f <filename>    :  firmware file name");
	PrintAndLogEx(NORMAL, "");
	PrintAndLogEx(NORMAL, "Examples:");
	PrintAndLogEx(NORMAL, "        sc upgrade f myfile");
	return 0;
}
int usage_sm_setclock(void) {
	PrintAndLogEx(NORMAL, "Usage: sc setclock [h] c <clockspeed>");
	PrintAndLogEx(NORMAL, "       h          :  this help");
	PrintAndLogEx(NORMAL, "       c <>       :  clockspeed (0 = 16mhz, 1=8mhz, 2=4mhz) ");
	PrintAndLogEx(NORMAL, "");
	PrintAndLogEx(NORMAL, "Examples:");
	PrintAndLogEx(NORMAL, "        sc setclock c 2");	
	return 0;
}

int CmdSmartRaw(const char *Cmd) {

	int hexlen = 0;
    bool active = false;
    bool active_select = false;	
	uint8_t cmdp = 0;
	bool errors = false, reply = true, decodeTLV = false, breakloop = false;
	uint8_t data[USB_CMD_DATA_SIZE] = {0x00};
		
	while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
		switch (tolower(param_getchar(Cmd, cmdp))) {
		case 'h': return usage_sm_raw();		
		case 'r':
			reply = false;
			cmdp++;
			break;
		case 'a':
			active = true;
			cmdp++;
			break;
		case 's':
			active_select = true;
			cmdp++;
			break;
		case 't':
			decodeTLV = true;
			cmdp++;
			break;			
		case 'd': {
			switch (param_gethex_to_eol(Cmd, cmdp+1, data, sizeof(data), &hexlen)) {
			case 1:
				PrintAndLogEx(WARNING, "Invalid HEX value.");
				return 1;
			case 2:
				PrintAndLogEx(WARNING, "Too many bytes.  Max %d bytes", sizeof(data));
				return 1;
			case 3:
				PrintAndLogEx(WARNING, "Hex must have even number of digits.");
				return 1;
			}
			cmdp++;
			breakloop = true;
			break;
		}
		default:
			PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
			errors = true;
			break;
		}

		if ( breakloop )
			break;
	}
	
	//Validations
	if (errors || cmdp == 0 ) return usage_sm_raw();			

	// arg0 = RFU flags
	// arg1 = length
	UsbCommand c = {CMD_SMART_RAW, {0, hexlen, 0}};	
	
	if (active || active_select) {
        c.arg[0] |= SC_CONNECT;
        if (active)
            c.arg[0] |= SC_NO_SELECT;
    }

	if (hexlen > 0) {
        c.arg[0] |= SC_RAW;
	}	
	
	memcpy(c.d.asBytes, data, hexlen );
	clearCommandBuffer();
	SendCommand(&c);

	// reading response from smart card
	if ( reply ) {
		UsbCommand resp;
		if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)) {
			PrintAndLogEx(WARNING, "smart card response failed");
			return 1;
		}
		uint32_t datalen = resp.arg[0];
		
		if ( !datalen ) {
			PrintAndLogEx(WARNING, "smart card response failed");
			return 1;			
		}

		PrintAndLogEx(INFO, "received %i bytes", datalen);
				
        if (!datalen)
            return 1;
		
		uint8_t *data = resp.d.asBytes;

		// TLV decoder
		if (decodeTLV ) {
			
			if (datalen >= 2) {
				PrintAndLogEx(SUCCESS, "%02x %02x | %s", data[datalen - 2], data[datalen - 1], GetAPDUCodeDescription(data[datalen - 2], data[datalen - 1])); 
			}
			if (datalen > 4) {
				TLVPrintFromBuffer(data, datalen - 2);
			}
		} else {
			PrintAndLogEx(SUCCESS, "%s", sprint_hex(data,  datalen)); 
		}
	}
	return 0;
}

int CmdSmartUpgrade(const char *Cmd) {

	PrintAndLogEx(WARNING, "WARNING - Smartcard socket firmware upgrade.");
	PrintAndLogEx(WARNING, "A dangerous command, do wrong and you will brick the smart card socket");
	
	FILE *f;
	char filename[FILE_PATH_SIZE] = {0};
	uint8_t cmdp = 0;
	bool errors = false;
	
	while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
		switch (tolower(param_getchar(Cmd, cmdp))) {
		case 'f':
			//File handling and reading
			if ( param_getstr(Cmd, cmdp+1, filename, FILE_PATH_SIZE) >= FILE_PATH_SIZE ) {
				PrintAndLogEx(FAILED, "Filename too long");
				errors = true;
				break;
			}			
			cmdp += 2;			
			break;
		case 'h':
			return usage_sm_upgrade();
		default:
			PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
			errors = true;
			break;
		}
	}
	
	//Validations
	if (errors || cmdp == 0 ) return usage_sm_upgrade();			
	
	// load file
	f = fopen(filename, "rb");
	if ( !f ){
		PrintAndLogEx(FAILED, "File: %s: not found or locked.", filename);
		return 1;
	}	
	
	// get filesize in order to malloc memory
	fseek(f, 0, SEEK_END);
	long fsize = ftell(f);
	fseek(f, 0, SEEK_SET);

	if (fsize < 0) 	{
		PrintAndLogDevice(WARNING, "error, when getting filesize");
		fclose(f);
		return 1;
	}
		
	uint8_t *dump = calloc(fsize, sizeof(uint8_t));
	if (!dump) {
		PrintAndLogDevice(WARNING, "error, cannot allocate memory ");
		fclose(f);
		return 1;
	}
	
	size_t bytes_read = fread(dump, 1, fsize, f);
	if (f)
		fclose(f);
	
	PrintAndLogEx(SUCCESS, "Smartcard socket firmware uploading to PM3");
	//Send to device
	uint32_t index = 0;
	uint32_t bytes_sent = 0;
	uint32_t bytes_remaining = bytes_read;

	while (bytes_remaining > 0){
		uint32_t bytes_in_packet = MIN(USB_CMD_DATA_SIZE, bytes_remaining);		
		UsbCommand c = {CMD_SMART_UPLOAD, {index + bytes_sent, bytes_in_packet, 0}};

		// Fill usb bytes with 0xFF
		memset(c.d.asBytes, 0xFF, USB_CMD_DATA_SIZE);
		memcpy(c.d.asBytes, dump + bytes_sent, bytes_in_packet);
		clearCommandBuffer();
		SendCommand(&c);	
		if ( !WaitForResponseTimeout(CMD_ACK, NULL, 2000) ) {
			PrintAndLogEx(WARNING, "timeout while waiting for reply.");
			free(dump);
			return 1;
		}
		
		bytes_remaining -= bytes_in_packet;
		bytes_sent += bytes_in_packet;
		printf("."); fflush(stdout);
	}
	free(dump);
	printf("\n");
	PrintAndLogEx(SUCCESS, "Smartcard socket firmware updating,  don\'t turn off your PM3!");
	
	// trigger the firmware upgrade
	UsbCommand c = {CMD_SMART_UPGRADE, {bytes_read, 0, 0}};		
	clearCommandBuffer();
	SendCommand(&c);
	UsbCommand resp;
	if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
		PrintAndLogEx(WARNING, "timeout while waiting for reply.");
		return 1;
	}
	if ( (resp.arg[0] && 0xFF ) )
		PrintAndLogEx(SUCCESS, "Smartcard socket firmware upgraded successful");
	else
		PrintAndLogEx(FAILED, "Smartcard socket firmware updating failed");
	return 0;
}

int CmdSmartInfo(const char *Cmd){
	uint8_t cmdp = 0;
	bool errors = false, silent = false;
	
	while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
		switch (tolower(param_getchar(Cmd, cmdp))) {
		case 'h': return usage_sm_info();
		case 's': 
			silent = true;
			break;			
		default:
			PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
			errors = true;
			break;
		}
		cmdp++;
	}
	
	//Validations
	if (errors ) return usage_sm_info();
	
	UsbCommand c = {CMD_SMART_ATR, {0, 0, 0}};
	clearCommandBuffer();
	SendCommand(&c);
	UsbCommand resp;
	if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
		if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
		return 1;
	}
	
	uint8_t isok = resp.arg[0] & 0xFF;
	if (!isok) {
		if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
		return 1;
	}		
	
	smart_card_atr_t card;
	memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t));
	
	// print header
	PrintAndLogEx(INFO, "\n--- Smartcard Information ---------");
	PrintAndLogEx(INFO, "-------------------------------------------------------------");
	PrintAndLogEx(INFO, "ISO76183 ATR : %s", sprint_hex(card.atr, card.atr_len));
	PrintAndLogEx(INFO, "look up ATR");
	PrintAndLogEx(INFO, "http://smartcard-atr.appspot.com/parse?ATR=%s", sprint_hex_inrow(card.atr, card.atr_len) );
	return 0;
}

int CmdSmartReader(const char *Cmd){
	uint8_t cmdp = 0;
	bool errors = false, silent = false;
	
	while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
		switch (tolower(param_getchar(Cmd, cmdp))) {
		case 'h': return usage_sm_reader();
		case 's': 
			silent = true;
			break;		
		default:
			PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
			errors = true;
			break;
		}
		cmdp++;		
	}
		
	//Validations
	if (errors ) return usage_sm_reader();
			
	UsbCommand c = {CMD_SMART_ATR, {0, 0, 0}};
	clearCommandBuffer();
	SendCommand(&c);
	UsbCommand resp;
	if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
		if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
		return 1;
	}
	
	uint8_t isok = resp.arg[0] & 0xFF;
	if (!isok) {
		if (!silent) PrintAndLogEx(WARNING, "smart card select failed");
		return 1;
	}		
	smart_card_atr_t card;
	memcpy(&card, (smart_card_atr_t *)resp.d.asBytes, sizeof(smart_card_atr_t));
	
	PrintAndLogEx(INFO, "ISO7816-3 ATR : %s", sprint_hex(card.atr, card.atr_len));	
	return 0;
}

int CmdSmartSetClock(const char *Cmd){
	uint8_t cmdp = 0;
	bool errors = false;
	uint8_t clock = 0;
	while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
		switch (tolower(param_getchar(Cmd, cmdp))) {
		case 'h': return usage_sm_setclock();
		case 'c': 
			clock = param_get8ex(Cmd, cmdp+1, 2, 10);
			if ( clock > 2)
				errors = true;
			
			cmdp += 2;
			break;		
		default:
			PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
			errors = true;
			break;
		}
	}
		
	//Validations
	if (errors || cmdp == 0) return usage_sm_setclock();
			
	UsbCommand c = {CMD_SMART_SETCLOCK, {clock, 0, 0}};
	clearCommandBuffer();
	SendCommand(&c);
	UsbCommand resp;
	if ( !WaitForResponseTimeout(CMD_ACK, &resp, 2500) ) {
		PrintAndLogEx(WARNING, "smart card select failed");
		return 1;
	}
	
	uint8_t isok = resp.arg[0] & 0xFF;
	if (!isok) {
		PrintAndLogEx(WARNING, "smart card set clock failed");
		return 1;
	}
	
	switch (clock) {
		case 0:			
			PrintAndLogEx(SUCCESS, "Clock changed to 16mhz giving 10800 baudrate");
			break;
		case 1:
			PrintAndLogEx(SUCCESS, "Clock changed to 8mhz giving 21600 baudrate");
			break;
		case 2:
			PrintAndLogEx(SUCCESS, "Clock changed to 4mhz giving 86400 baudrate");
			break;
		default:
			break;
	}
	return 0;
}

int CmdSmartList(const char *Cmd) {
	CmdTraceList("7816");
	return 0;
}

static command_t CommandTable[] = {
	{"help",	CmdHelp,            1, "This help"},
	{"list",	CmdSmartList,       0, "List ISO 7816 history"},	
	{"info",	CmdSmartInfo,		1, "Tag information [rdv40]"},
	{"reader",	CmdSmartReader,		1, "Act like an IS07816 reader [rdv40]"},
	{"raw",		CmdSmartRaw,		1, "Send raw hex data to tag [rdv40]"},
	{"upgrade",	CmdSmartUpgrade,	1, "Upgrade firmware [rdv40]"},
	{"setclock", CmdSmartSetClock,	1, "Set clock speed"},
	{NULL, NULL, 0, NULL}
};

int CmdSmartcard(const char *Cmd) {
	clearCommandBuffer();
	CmdsParse(CommandTable, Cmd);
	return 0;
}

int CmdHelp(const char *Cmd) {
	CmdsHelp(CommandTable);
	return 0;
}