#ifndef PROTOCOLS_H #define PROTOCOLS_H #include "common.h" //The following data is taken from http://www.proxmark.org/forum/viewtopic.php?pid=13501#p13501 /* ISO14443A (usually NFC tags) 26 (7bits) = REQA 30 = Read (usage: 30+1byte block number+2bytes ISO14443A-CRC - answer: 16bytes) A2 = Write (usage: A2+1byte block number+4bytes data+2bytes ISO14443A-CRC - answer: 0A [ACK] or 00 [NAK]) 52 (7bits) = WUPA (usage: 52(7bits) - answer: 2bytes ATQA) 93 20 = Anticollision (usage: 9320 - answer: 4bytes UID+1byte UID-bytes-xor) 93 70 = Select (usage: 9370+5bytes 9320 answer - answer: 1byte SAK) 95 20 = Anticollision of cascade level2 95 70 = Select of cascade level2 50 00 = Halt (usage: 5000+2bytes ISO14443A-CRC - no answer from card) E0 = RATS D0 = PPS Mifare 60 = Authenticate with KeyA 61 = Authenticate with KeyB 40 (7bits) = Used to put Chinese Changeable UID cards in special mode (must be followed by 43 (8bits) - answer: 0A) C0 = Decrement C1 = Increment C2 = Restore B0 = Transfer Ultralight C A0 = Compatibility Write (to accomodate MIFARE commands) 1A = Step1 Authenticate AF = Step2 Authenticate ISO14443B 05 = REQB 1D = ATTRIB 50 = HALT BA = PING (reader -> tag) AB = PONG (tag -> reader) SRIX4K (tag does not respond to 05) 06 00 = INITIATE 0E xx = SELECT ID (xx = Chip-ID) 0B = Get UID 08 yy = Read Block (yy = block number) 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written) 0C = Reset to Inventory 0F = Completion 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate) ISO15693 MANDATORY COMMANDS (all ISO15693 tags must support those) 01 = Inventory (usage: 260100+2bytes ISO15693-CRC - answer: 12bytes) 02 = Stay Quiet OPTIONAL COMMANDS (not all tags support them) 20 = Read Block (usage: 0220+1byte block number+2bytes ISO15693-CRC - answer: 4bytes) 21 = Write Block (usage: 0221+1byte block number+4bytes data+2bytes ISO15693-CRC - answer: 4bytes) 22 = Lock Block 23 = Read Multiple Blocks (usage: 0223+1byte 1st block to read+1byte last block to read+2bytes ISO15693-CRC) 24 = Write Multiple Blocks 25 = Select 26 = Reset to Ready 27 = Write AFI 28 = Lock AFI 29 = Write DSFID 2A = Lock DSFID 2B = Get_System_Info (usage: 022B+2bytes ISO15693-CRC - answer: 14 or more bytes) 2C = Read Multiple Block Security Status (usage: 022C+1byte 1st block security to read+1byte last block security to read+2bytes ISO15693-CRC) EM Microelectronic CUSTOM COMMANDS A5 = Active EAS (followed by 1byte IC Manufacturer code+1byte EAS type) A7 = Write EAS ID (followed by 1byte IC Manufacturer code+2bytes EAS value) B8 = Get Protection Status for a specific block (followed by 1byte IC Manufacturer code+1byte block number+1byte of how many blocks after the previous is needed the info) E4 = Login (followed by 1byte IC Manufacturer code+4bytes password) NXP/Philips CUSTOM COMMANDS A0 = Inventory Read A1 = Fast Inventory Read A2 = Set EAS A3 = Reset EAS A4 = Lock EAS A5 = EAS Alarm A6 = Password Protect EAS A7 = Write EAS ID A8 = Read EPC B0 = Inventory Page Read B1 = Fast Inventory Page Read B2 = Get Random Number B3 = Set Password B4 = Write Password B5 = Lock Password B6 = Bit Password Protection B7 = Lock Page Protection Condition B8 = Get Multiple Block Protection Status B9 = Destroy SLI BA = Enable Privacy BB = 64bit Password Protection 40 = Long Range CMD (Standard ISO/TR7003:1990) ISO 7816-4 Basic interindustry commands. For command APDU's. B0 = READ BINARY D0 = WRITE BINARY D6 = UPDATE BINARY 0E = ERASE BINARY B2 = READ RECORDS D2 = WRITE RECORDS E2 = APPEND RECORD DC = UPDATE RECORD CA = GET DATA DA = PUT DATA A4 = SELECT FILE 20 = VERIFY 88 = INTERNAL AUTHENTICATION 82 = EXTERNAL AUTHENTICATION B4 = GET CHALLENGE 70 = MANAGE CHANNEL For response APDU's 90 00 = OK 6x xx = ERROR */ // these cmds are adjusted to ISO15693 and Manchester encoding requests. // for instance ICLASS_CMD_SELECT 0x81 tells if ISO14443b/BPSK coding/106 kbits/s // for instance ICLASS_CMD_SELECT 0x41 tells if ISO14443b/BPSK coding/423 kbits/s // #define ICLASS_CMD_HALT 0x0 #define ICLASS_CMD_SELECT 0x1 #define ICLASS_CMD_ACTALL 0xA #define ICLASS_CMD_DETECT 0xF #define ICLASS_CMD_PAGESEL 0x4 #define ICLASS_CMD_CHECK 0x5 #define ICLASS_CMD_READ4 0x6 #define ICLASS_CMD_UPDATE 0x7 #define ICLASS_CMD_READCHECK 0x8 #define ICLASS_CMD_READ_OR_IDENTIFY 0xC #define ICLASS_CMD_ACT 0xE #define ICLASS_CREDIT(x) (((x) & 0x10) == 0x10) #define ICLASS_DEBIT(x) (((x) & 0x80) == 0x80) #define ISO14443A_CMD_REQA 0x26 #define ISO14443A_CMD_READBLOCK 0x30 #define ISO14443A_CMD_WUPA 0x52 #define ISO14443A_CMD_OPTS 0x35 #define ISO14443A_CMD_ANTICOLL_OR_SELECT 0x93 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_2 0x95 #define ISO14443A_CMD_ANTICOLL_OR_SELECT_3 0x97 #define ISO14443A_CMD_WRITEBLOCK 0xA0 #define ISO14443A_CMD_HALT 0x50 #define ISO14443A_CMD_RATS 0xE0 #define ISO14443A_CMD_PPS 0xD0 #define ISO14443A_CMD_NXP_DESELECT 0xC2 #define MIFARE_SELECT_CT 0x88 #define MIFARE_AUTH_KEYA 0x60 #define MIFARE_AUTH_KEYB 0x61 #define MIFARE_MAGICWUPC1 0x40 #define MIFARE_MAGICWUPC2 0x43 #define MIFARE_MAGICWIPEC 0x41 #define MIFARE_CMD_DEC 0xC0 #define MIFARE_CMD_INC 0xC1 #define MIFARE_CMD_RESTORE 0xC2 #define MIFARE_CMD_TRANSFER 0xB0 #define MIFARE_EV1_PERSONAL_UID 0x40 #define MIFARE_EV1_SETMODE 0x43 #define MIFARE_EV1_UIDF0 0x00 #define MIFARE_EV1_UIDF1 0x40 #define MIFARE_EV1_UIDF2 0x20 #define MIFARE_EV1_UIDF3 0x60 #define MIFARE_ULC_WRITE 0xA2 #define MIFARE_ULC_COMP_WRITE 0xA0 #define MIFARE_ULC_AUTH_1 0x1A #define MIFARE_ULC_AUTH_2 0xAF #define MIFARE_ULEV1_AUTH 0x1B #define MIFARE_ULEV1_VERSION 0x60 #define MIFARE_ULEV1_FASTREAD 0x3A #define MIFARE_ULEV1_READ_CNT 0x39 #define MIFARE_ULEV1_INCR_CNT 0xA5 #define MIFARE_ULEV1_READSIG 0x3C #define MIFARE_ULEV1_CHECKTEAR 0x3E #define MIFARE_ULEV1_VCSL 0x4B // New Mifare UL Nano commands. Ref:: (https://www.nxp.com/docs/en/data-sheet/MF0UN_H_00.pdf) #define MIFARE_ULNANO_WRITESIG 0xA9 #define MIFARE_ULNANO_LOCKSIG 0xAC // mifare 4bit card answers #define CARD_ACK 0x0A // 1010 - ACK #define CARD_NACK_IV 0x00 // 0000 - NACK, invalid argument (invalid page address) #define CARD_NACK_PA 0x01 // 0001 - NACK, parity / crc error #define CARD_NACK_NA 0x04 // 0100 - NACK, not allowed (command not allowed) #define CARD_NACK_TR 0x05 // 0101 - NACK, transmission error #define CARD_NACK_EE 0x07 // 0111 - NACK, EEPROM write error // Magic Generation 1, parameter "work flags" // bit 0 - need get UID // bit 1 - send wupC (wakeup chinese) // bit 2 - send HALT cmd after sequence // bit 3 - turn on FPGA // bit 4 - turn off FPGA // bit 5 - set datain instead of issuing USB reply (called via ARM for StandAloneMode14a) #define MAGIC_UID 0x01 #define MAGIC_WUPC 0x02 #define MAGIC_HALT 0x04 #define MAGIC_INIT 0x08 #define MAGIC_OFF 0x10 #define MAGIC_DATAIN 0x20 #define MAGIC_WIPE 0x40 #define MAGIC_SINGLE (MAGIC_WUPC | MAGIC_HALT | MAGIC_INIT | MAGIC_OFF) //0x1E // by CMD_HF_MIFARE_CIDENT #define MAGIC_GEN_1A 1 #define MAGIC_GEN_1B 2 #define MAGIC_GEN_2 4 #define MAGIC_GEN_UNFUSED 5 #define MAGIC_SUPER 6 #define MAGIC_NTAG21X 7 #define MAGIC_GEN_3 8 /** 06 00 = INITIATE 0E xx = SELECT ID (xx = Chip-ID) 0B = Get UID 08 yy = Read Block (yy = block number) 09 yy dd dd dd dd = Write Block (yy = block number; dd dd dd dd = data to be written) 0C = Reset to Inventory 0F = Completion 0A 11 22 33 44 55 66 = Authenticate (11 22 33 44 55 66 = data to authenticate) **/ #define ISO14443B_REQB 0x05 #define ISO14443B_ATTRIB 0x1D #define ISO14443B_HALT 0x50 #define ISO14443B_INITIATE 0x06 #define ISO14443B_SELECT 0x0E #define ISO14443B_GET_UID 0x0B #define ISO14443B_READ_BLK 0x08 #define ISO14443B_WRITE_BLK 0x09 #define ISO14443B_RESET 0x0C #define ISO14443B_COMPLETION 0x0F #define ISO14443B_AUTHENTICATE 0x0A #define ISO14443B_PING 0xBA #define ISO14443B_PONG 0xAB // ASK C-ticket #define ASK_REQT 0x10 #define ASK_IDENTIFY 0x0F #define ASK_SELECT 0x9F #define ASK_MULTREAD (0x1 << 4) // High nibble #define ASK_UPDATE (0x3 << 4) // High nibble #define ASK_WRITE (0x5 << 4) // High nibble #define ASK_READ (0x6 << 4) // High nibble #define ASK_DESACTIVATE 0xF0 // defined crypto RF commands // only interpreting channel 1 communication #define CRYPTORF_SET_USER_ZONE 0x11 #define CRYPTORF_READ_USER_ZONE 0x12 #define CRYPTORF_WRITE_USER_ZONE 0x13 #define CRYPTORF_WRITE_SYSTEM_ZONE 0x14 #define CRYPTORF_READ_SYSTEM_ZONE 0x16 #define CRYPTORF_VERIFY_CRYPTO 0x18 #define CRYPTORF_SEND_CHECKSUM 0x19 #define CRYPTORF_DESELECT 0x1A #define CRYPTORF_IDLE 0x1B #define CRYPTORF_CHECK_PASSWORD 0x1C // defined Crypto RF errors #define CRYPTORF_ERR_ACCESS_DENIED_ZONE 0x99 #define CRYPTORF_ERR_PARAM_INVALID 0xA1 #define CRYPTORF_ERR_ADDRES_INVALID 0xA2 #define CRYPTORF_ERR_LENGTH_INVALID 0xA3 #define CRYPTORF_ERR_AUTH_ENC_REQ 0xA9 #define CRYPTORF_ERR_ACCESS_DENIED_WLOCK 0xB9 #define CRYPTORF_ERR_BYTE_ACCESS_DENIED_NOT_ALLOWED 0xBA #define CRYPTORF_ERR_ACCESS_DENIED_NOT_ALLOWED 0xBA #define CRYPTORF_ERR_BYTE_ACCESS_DENIED_PASSWD_REQ 0xBC #define CRYPTORF_ERR_CHECKSUM_FAIL2 0xC8 #define CRYPTORF_ERR_CHECKSUM_FAIL 0xC9 #define CRYPTORF_ERR_PASSWD_REQ 0xD9 #define CRYPTORF_ERR_FUSE_ACCESS_DENIED 0xDF #define CRYPTORF_ERR_MODIFY_FORBIDDEN 0xE9 #define CRYPTORF_ERR_ACCESS_DENIED_FUSE_ORDR 0xE9 #define CRYPTORF_ERR_MEMORY_WRITE_DATA_M 0xED #define CRYPTORF_ERR_MEMORY_ACCESS 0xEE #define CRYPTORF_ERR_MEMORY_ACCESS_SEC 0xF9 //First byte is 26 #define ISO15693_INVENTORY 0x01 #define ISO15693_STAYQUIET 0x02 //First byte is 02 #define ISO15693_READBLOCK 0x20 #define ISO15693_WRITEBLOCK 0x21 #define ISO15693_LOCKBLOCK 0x22 #define ISO15693_READ_MULTI_BLOCK 0x23 #define ISO15693_WRITE_MULTI_BLOCK 0x24 #define ISO15693_SELECT 0x25 #define ISO15693_RESET_TO_READY 0x26 #define ISO15693_WRITE_AFI 0x27 #define ISO15693_LOCK_AFI 0x28 #define ISO15693_WRITE_DSFID 0x29 #define ISO15693_LOCK_DSFID 0x2A #define ISO15693_GET_SYSTEM_INFO 0x2B #define ISO15693_READ_MULTI_SECSTATUS 0x2C // NXP/Philips custom commands #define ISO15693_INVENTORY_READ 0xA0 #define ISO15693_FAST_INVENTORY_READ 0xA1 #define ISO15693_SET_EAS 0xA2 #define ISO15693_RESET_EAS 0xA3 #define ISO15693_LOCK_EAS 0xA4 #define ISO15693_EAS_ALARM 0xA5 #define ISO15693_PASSWORD_PROTECT_EAS 0xA6 #define ISO15693_WRITE_EAS_ID 0xA7 #define ISO15693_READ_EPC 0xA8 #define ISO15693_GET_NXP_SYSTEM_INFO 0xAB #define ISO15693_INVENTORY_PAGE_READ 0xB0 #define ISO15693_FAST_INVENTORY_PAGE_READ 0xB1 #define ISO15693_GET_RANDOM_NUMBER 0xB2 #define ISO15693_SET_PASSWORD 0xB3 #define ISO15693_WRITE_PASSWORD 0xB4 #define ISO15693_LOCK_PASSWORD 0xB5 #define ISO15693_PROTECT_PAGE 0xB6 #define ISO15693_LOCK_PAGE_PROTECTION 0xB7 #define ISO15693_GET_MULTI_BLOCK_PROTECTION 0xB8 #define ISO15693_DESTROY 0xB9 #define ISO15693_ENABLE_PRIVACY 0xBA #define ISO15693_64BIT_PASSWORD_PROTECTION 0xBB #define ISO15693_STAYQUIET_PERSISTENT 0xBC #define ISO15693_READ_SIGNATURE 0xBD // Topaz command set: #define TOPAZ_REQA 0x26 // Request #define TOPAZ_WUPA 0x52 // WakeUp #define TOPAZ_RID 0x78 // Read ID #define TOPAZ_RALL 0x00 // Read All (all bytes) #define TOPAZ_READ 0x01 // Read (a single byte) #define TOPAZ_WRITE_E 0x53 // Write-with-erase (a single byte) #define TOPAZ_WRITE_NE 0x1a // Write-no-erase (a single byte) // additional commands for Dynamic Memory Model #define TOPAZ_RSEG 0x10 // Read segment #define TOPAZ_READ8 0x02 // Read (eight bytes) #define TOPAZ_WRITE_E8 0x54 // Write-with-erase (eight bytes) #define TOPAZ_WRITE_NE8 0x1B // Write-no-erase (eight bytes) // Definitions of which protocol annotations there are available #define ISO_14443A 0 #define ICLASS 1 #define ISO_14443B 2 #define TOPAZ 3 #define ISO_7816_4 4 #define MFDES 5 #define LEGIC 6 #define ISO_15693 7 #define FELICA 8 #define PROTO_MIFARE 9 #define PROTO_HITAG1 10 #define THINFILM 11 #define LTO 12 #define PROTO_HITAG2 13 #define PROTO_HITAGS 14 #define PROTO_CRYPTORF 15 // Picopass fuses #define FUSE_FPERS 0x80 #define FUSE_CODING1 0x40 #define FUSE_CODING0 0x20 #define FUSE_CRYPT1 0x10 #define FUSE_CRYPT0 0x08 #define FUSE_FPROD1 0x04 #define FUSE_FPROD0 0x02 #define FUSE_RA 0x01 // Picopass Pagemode fuses #define PICOPASS_NON_SECURE_PAGEMODE 0x01 #define PICOPASS_SECURE_PAGEMODE 0x11 // ISO 7816-4 Basic interindustry commands. For command APDU's. #define ISO7816_READ_BINARY 0xB0 #define ISO7816_WRITE_BINARY 0xD0 #define ISO7816_UPDATE_BINARY 0xD6 #define ISO7816_ERASE_BINARY 0x0E #define ISO7816_READ_RECORDS 0xB2 #define ISO7816_WRITE_RECORDS 0xD2 #define ISO7816_APPEND_RECORD 0xE2 #define ISO7816_UPDATE_RECORD 0xDC #define ISO7816_GET_DATA 0xCA #define ISO7816_PUT_DATA 0xDA #define ISO7816_SELECT_FILE 0xA4 #define ISO7816_VERIFY 0x20 #define ISO7816_INTERNAL_AUTHENTICATION 0x88 #define ISO7816_EXTERNAL_AUTHENTICATION 0x82 #define ISO7816_GET_CHALLENGE 0x84 #define ISO7816_MANAGE_CHANNEL 0x70 #define ISO7816_GET_RESPONSE 0xC0 // ISO7816-4 For response APDU's #define ISO7816_OK 0x9000 // 6x xx = ERROR // MIFARE DESFire command set: #define MFDES_AUTHENTICATE 0x0A // AUTHENTICATE_NATIVE #define MFDES_AUTHENTICATE_ISO 0x1A // AUTHENTICATE_STANDARD #define MFDES_AUTHENTICATE_AES 0xAA #define MFDES_AUTHENTICATE_EV2F 0x71 #define MFDES_AUTHENTICATE_EV2NF 0x77 #define MFDES_CREDIT 0x0C #define MFDES_LIMITED_CREDIT 0x1C #define MFDES_WRITE_RECORD 0x3B #define MFDES_READSIG 0x3C #define MFDES_WRITE_DATA 0x3D #define MFDES_GET_KEY_SETTINGS 0x45 #define MFDES_GET_UID 0x51 #define MFDES_CHANGE_KEY_SETTINGS 0x54 #define MFDES_ROLL_KEY_SETTINGS 0x55 #define MFDES_INIT_KEY_SETTINGS 0x56 #define MFDES_FINALIZE_KEY_SETTINGS 0x57 #define MFDES_SELECT_APPLICATION 0x5A #define MFDES_CHANGE_FILE_SETTINGS 0x5F #define MFDES_GET_VERSION 0x60 #define MFDES_GET_ISOFILE_IDS 0x61 #define MFDES_GET_KEY_VERSION 0x64 #define MFDES_GET_DELEGATE_INFO 0x69 #define MFDES_GET_APPLICATION_IDS 0x6A #define MFDES_GET_VALUE 0x6C #define MFDES_GET_FREE_MEMORY 0x6E #define MFDES_GET_DF_NAMES 0x6D #define MFDES_GET_FILE_IDS 0x6F #define MFDES_ABORT_TRANSACTION 0xA7 #define MFDES_ADDITIONAL_FRAME 0xAF #define MFDES_READ_RECORDS 0xBB #define MFDES_READ_DATA 0xBD #define MFDES_CREATE_CYCLIC_RECORD_FILE 0xC0 #define MFDES_CREATE_LINEAR_RECORD_FILE 0xC1 #define MFDES_CHANGE_KEY 0xC4 #define MFDES_CHANGE_KEY_EV2 0xC6 #define MFDES_COMMIT_TRANSACTION 0xC7 #define MFDES_COMMIT_READER_ID 0xC8 #define MFDES_CREATE_DELEGATE_APP 0xC9 #define MFDES_CREATE_APPLICATION 0xCA #define MFDES_CREATE_BACKUP_DATA_FILE 0xCB #define MFDES_CREATE_VALUE_FILE 0xCC #define MFDES_CREATE_STD_DATA_FILE 0xCD #define MFDES_CREATE_TRANS_MAC_FILE 0xCE #define MFDES_DELETE_APPLICATION 0xDA #define MFDES_DEBIT 0xDC #define MFDES_DELETE_FILE 0xDF #define MFDES_CLEAR_RECORD_FILE 0xEB #define MFDES_PREPARE_PC 0xF0 #define MFDES_PROXIMITY_CHECK 0xF2 #define MFDES_GET_FILE_SETTINGS 0xF5 #define MFDES_FORMAT_PICC 0xFC #define MFDES_VERIFY_PC 0xFD // MIFARE DESFire status & error codes: #define MFDES_S_OPERATION_OK 0x00 #define MFDES_S_NO_CHANGES 0x0C #define MFDES_S_SIGNATURE 0x90 #define MFDES_S_ADDITIONAL_FRAME 0xAF #define MFDES_E_OUT_OF_EEPROM 0x0E #define MFDES_E_ILLEGAL_COMMAND_CODE 0x1C #define MFDES_E_INTEGRITY_ERROR 0x1E #define MFDES_E_NO_SUCH_KEY 0x40 #define MFDES_E_LENGTH 0x7E #define MFDES_E_PERMISSION_DENIED 0x9D #define MFDES_E_PARAMETER_ERROR 0x9E #define MFDES_E_APPLICATION_NOT_FOUND 0xA0 #define MFDES_E_APPL_INTEGRITY 0xA1 #define MFDES_E_AUTHENTIFICATION_ERROR 0xAE #define MFDES_E_BOUNDARY 0xBE #define MFDES_E_PICC_INTEGRITY 0xC1 #define MFDES_E_COMMAND_ABORTED 0xCA #define MFDES_E_PICC_DISABLED 0xCD #define MFDES_E_COUNT 0xCE #define MFDES_E_DUPLICATE 0xDE #define MFDES_E_EEPROM 0xEE #define MFDES_E_FILE_NOT_FOUND 0xF0 #define MFDES_E_FILE_INTEGRITY 0xF1 // LEGIC Commands #define LEGIC_MIM_22 0x0D #define LEGIC_MIM_256 0x1D #define LEGIC_MIM_1024 0x3D #define LEGIC_ACK_22 0x19 #define LEGIC_ACK_256 0x39 #define LEGIC_READ 0x01 #define LEGIC_WRITE 0x00 /* T55x7 configuration register definitions */ #define T55x7_POR_DELAY 0x00000001 #define T55x7_ST_TERMINATOR 0x00000008 #define T55x7_PWD 0x00000010 #define T55x7_MAXBLOCK_SHIFT 5 #define T55x7_AOR 0x00000200 #define T55x7_PSKCF_RF_2 0 #define T55x7_PSKCF_RF_4 0x00000400 #define T55x7_PSKCF_RF_8 0x00000800 #define T55x7_MODULATION_DIRECT 0 #define T55x7_MODULATION_PSK1 0x00001000 #define T55x7_MODULATION_PSK2 0x00002000 #define T55x7_MODULATION_PSK3 0x00003000 #define T55x7_MODULATION_FSK1 0x00004000 #define T55x7_MODULATION_FSK2 0x00005000 #define T55x7_MODULATION_FSK1a 0x00006000 #define T55x7_MODULATION_FSK2a 0x00007000 #define T55x7_MODULATION_MANCHESTER 0x00008000 #define T55x7_MODULATION_BIPHASE 0x00010000 #define T55x7_MODULATION_DIPHASE 0x00018000 #define T55x7_X_MODE 0x00020000 #define T55x7_BITRATE_RF_8 0 #define T55x7_BITRATE_RF_16 0x00040000 #define T55x7_BITRATE_RF_32 0x00080000 #define T55x7_BITRATE_RF_40 0x000C0000 #define T55x7_BITRATE_RF_50 0x00100000 #define T55x7_BITRATE_RF_64 0x00140000 #define T55x7_BITRATE_RF_100 0x00180000 #define T55x7_BITRATE_RF_128 0x001C0000 #define T55x7_TESTMODE_DISABLED 0x60000000 /* T5555 (Q5) configuration register definitions */ #define T5555_ST_TERMINATOR 0x00000001 #define T5555_MAXBLOCK_SHIFT 0x00000001 #define T5555_MODULATION_MANCHESTER 0 #define T5555_MODULATION_PSK1 0x00000010 #define T5555_MODULATION_PSK2 0x00000020 #define T5555_MODULATION_PSK3 0x00000030 #define T5555_MODULATION_FSK1 0x00000040 #define T5555_MODULATION_FSK2 0x00000050 #define T5555_MODULATION_BIPHASE 0x00000060 #define T5555_MODULATION_DIRECT 0x00000070 #define T5555_INVERT_OUTPUT 0x00000080 #define T5555_PSK_RF_2 0 #define T5555_PSK_RF_4 0x00000100 #define T5555_PSK_RF_8 0x00000200 #define T5555_USE_PWD 0x00000400 #define T5555_USE_AOR 0x00000800 #define T5555_SET_BITRATE(x) (((x-2)/2)<<12) #define T5555_GET_BITRATE(x) ((((x >> 12) & 0x3F)*2)+2) #define T5555_BITRATE_SHIFT 12 //(RF=2n+2) ie 64=2*0x1F+2 or n = (RF-2)/2 #define T5555_FAST_WRITE 0x00004000 #define T5555_PAGE_SELECT 0x00008000 #define T5555_FIXED 0x60000000 #define T55XX_WRITE_TIMEOUT 1500 // em4x05 & em4x69 chip configuration register definitions #define EM4x05_GET_BITRATE(x) ((((x) & 0x3F) * 2) + 2) #define EM4x05_SET_BITRATE(x) (((x) - 2) / 2) #define EM4x05_MODULATION_NRZ 0x00000000 #define EM4x05_MODULATION_MANCHESTER 0x00000040 #define EM4x05_MODULATION_BIPHASE 0x00000080 #define EM4x05_MODULATION_MILLER 0x000000C0 //not supported by all 4x05/4x69 chips #define EM4x05_MODULATION_PSK1 0x00000100 //not supported by all 4x05/4x69 chips #define EM4x05_MODULATION_PSK2 0x00000140 //not supported by all 4x05/4x69 chips #define EM4x05_MODULATION_PSK3 0x00000180 //not supported by all 4x05/4x69 chips #define EM4x05_MODULATION_FSK1 0x00000200 //not supported by all 4x05/4x69 chips #define EM4x05_MODULATION_FSK2 0x00000240 //not supported by all 4x05/4x69 chips #define EM4x05_PSK_RF_2 0 #define EM4x05_PSK_RF_4 0x00000400 #define EM4x05_PSK_RF_8 0x00000800 #define EM4x05_MAXBLOCK_SHIFT 14 #define EM4x05_FIRST_USER_BLOCK 5 #define EM4x05_SET_NUM_BLOCKS(x) (( (x) + 4) << 14) //# of blocks sent during default read mode #define EM4x05_GET_NUM_BLOCKS(x) ((( (x) >> 14) & 0xF) - 4) #define EM4x05_READ_LOGIN_REQ (1 << 18) #define EM4x05_READ_HK_LOGIN_REQ (1 << 19) #define EM4x05_WRITE_LOGIN_REQ (1 << 20) #define EM4x05_WRITE_HK_LOGIN_REQ (1 << 21) #define EM4x05_READ_AFTER_WRITE (1 << 22) #define EM4x05_DISABLE_ALLOWED (1 << 23) #define EM4x05_READER_TALK_FIRST (1 << 24) #define EM4x05_INVERT (1 << 25) #define EM4x05_PIGEON (1 << 26) // FeliCa protocol #define FELICA_POLL_REQ 0x00 #define FELICA_POLL_ACK 0x01 #define FELICA_REQSRV_REQ 0x02 #define FELICA_REQSRV_ACK 0x03 #define FELICA_REQRESP_REQ 0x04 #define FELICA_REQRESP_ACK 0x05 #define FELICA_RDBLK_REQ 0x06 #define FELICA_RDBLK_ACK 0x07 #define FELICA_WRTBLK_REQ 0x08 #define FELICA_WRTBLK_ACK 0x09 #define FELICA_SRCHSYSCODE_REQ 0x0a #define FELICA_SRCHSYSCODE_ACK 0x0b #define FELICA_REQSYSCODE_REQ 0x0c #define FELICA_REQSYSCODE_ACK 0x0d #define FELICA_AUTH1_REQ 0x10 #define FELICA_AUTH1_ACK 0x11 #define FELICA_AUTH2_REQ 0x12 #define FELICA_AUTH2_ACK 0x13 #define FELICA_RDSEC_REQ 0x14 #define FELICA_RDSEC_ACK 0x15 #define FELICA_WRTSEC_REQ 0x16 #define FELICA_WRTSEC_ACK 0x17 #define FELICA_REQSRV2_REQ 0x32 #define FELICA_REQSRV2_ACK 0x33 #define FELICA_GETSTATUS_REQ 0x38 #define FELICA_GETSTATUS_ACK 0x39 #define FELICA_OSVER_REQ 0x3c #define FELICA_OSVER_ACK 0x3d #define FELICA_RESET_MODE_REQ 0x3e #define FELICA_RESET_MODE_ACK 0x3f #define FELICA_AUTH1V2_REQ 0x40 #define FELICA_AUTH1V2_ACK 0x41 #define FELICA_AUTH2V2_REQ 0x42 #define FELICA_AUTH2V2_ACK 0x43 #define FELICA_RDSECV2_REQ 0x44 #define FELICA_RDSECV2_ACK 0x45 #define FELICA_WRTSECV2_REQ 0x46 #define FELICA_WRTSECV2_ACK 0x47 #define FELICA_UPDATE_RNDID_REQ 0x4C #define FELICA_UPDATE_RNDID_ACK 0x4D // FeliCa SYSTEM list #define SYSTEMCODE_ANY 0xffff // ANY #define SYSTEMCODE_FELICA_LITE 0x88b4 // FeliCa Lite #define SYSTEMCODE_COMMON 0xfe00 // Common #define SYSTEMCODE_EDY 0xfe00 // Edy #define SYSTEMCODE_CYBERNE 0x0003 // Cyberne #define SYSTEMCODE_SUICA 0x0003 // Suica #define SYSTEMCODE_PASMO 0x0003 // Pasmo //FeliCa Service list Suica/pasmo (little endian) #define SERVICE_SUICA_INOUT 0x108f // SUICA/PASMO #define SERVICE_SUICA_HISTORY 0x090f // SUICA/PASMO #define SERVICE_FELICA_LITE_READONLY 0x0b00 // FeliCa Lite RO #define SERVICE_FELICA_LITE_READWRITE 0x0900 // FeliCa Lite RW // Calypso protocol #define CALYPSO_GET_RESPONSE 0xC0 #define CALYPSO_SELECT 0xA4 #define CALYPSO_INVALIDATE 0x04 #define CALYPSO_REHABILITATE 0x44 #define CALYPSO_APPEND_RECORD 0xE2 #define CALYPSO_DECREASE 0x30 #define CALYPSO_INCREASE 0x32 #define CALYPSO_READ_BINARY 0xB0 #define CALYPSO_READ_RECORD 0xB2 #define CALYPSO_UPDATE_BINARY 0xD6 #define CALYPSO_UPDATE_RECORD 0xDC #define CALYPSO_WRITE_RECORD 0xD2 #define CALYPSO_OPEN_SESSION 0x8A #define CALYPSO_CLOSE_SESSION 0x8E #define CALYPSO_GET_CHALLENGE 0x84 #define CALYPSO_CHANGE_PIN 0xD8 #define CALYPSO_VERIFY_PIN 0x20 #define CALYPSO_SV_GET 0x7C #define CALYPSO_SV_DEBIT 0xBA #define CALYPSO_SV_RELOAD 0xB8 #define CALYPSO_SV_UN_DEBIT 0xBC #define CALYPSO_SAM_SV_DEBIT 0x54 #define CALYPSO_SAM_SV_RELOAD 0x56 // HITAG1 commands #define HITAG1_SET_CCNEW 0xC2 // left 5 bits only #define HITAG1_READ_ID 0x00 // not a real command, consists of 5 bits length, bits partial SN, 8 bits CRC #define HITAG1_SELECT 0x00 // left 5 bits only, followed by 32 bits SN and 8 bits CRC #define HITAG1_WRPPAGE 0x80 // left 4 bits only, followed by 8 bits page and 8 bits CRC #define HITAG1_WRPBLK 0x90 // left 4 bits only, followed by 8 bits block and 8 bits CRC #define HITAG1_WRCPAGE 0xA0 // left 4 bits only, followed by 8 bits page or key information and 8 bits CRC #define HITAG1_WRCBLK 0xB0 // left 4 bits only, followed by 8 bits block and 8 bits CRC #define HITAG1_RDPPAGE 0xC0 // left 4 bits only, followed by 8 bits page and 8 bits CRC #define HITAG1_RDPBLK 0xD0 // left 4 bits only, followed by 8 bits block and 8 bits CRC #define HITAG1_RDCPAGE 0xE0 // left 4 bits only, followed by 8 bits page and 8 bits CRC #define HITAG1_RDCBLK 0xF0 // left 4 bits only, followed by 8 bits block and 8 bits CRC #define HITAG1_HALT 0x70 // left 4 bits only, followed by 8 bits (dummy) page and 8 bits CRC // HITAG2 commands #define HITAG2_START_AUTH 0x3 // left 5 bits only #define HITAG2_HALT 0x0 // left 5 bits only #define HITAG2_READ_PAGE 0x3 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits #define HITAG2_READ_PAGE_INVERTED 0x1 // page number in bits 5 to 3, page number inverted in bit 0 and following 2 bits #define HITAG2_WRITE_PAGE 0x2 // page number in bits 5 to 3, page number // HITAG S commands #define HITAGS_QUIET 0x70 //inverted in bit 0 and following 2 bits #define HITAGS_WRITE_BLOCK 0x90 // LTO-CM commands #define LTO_REQ_STANDARD 0x45 #define LTO_REQ_ALL 0x4A #define LTO_READWORD 0x40 // read 2 bytes (word) #define LTO_READBLOCK 0x30 #define LTO_READBLOCK_CONT 0x80 #define LTO_SELECT 0x93 #define LTO_WRITEWORD 0xB0 // write 2 bytes (word) #define LTO_WRITEBLOCK 0xA0 #define LTO_HALT 0x50 #define LTO_TEST_CMD_1 0x0E #define LTO_TEST_CMD_2 0x6C // 0x0A = ACK // 0x05 = NACK #endif // PROTOCOLS_H