//----------------------------------------------------------------------------- // Jonathan Westhues, Mar 2006 // Edits by Gerhard de Koning Gans, Sep 2007 // // This code is licensed to you under the terms of the GNU GPL, version 2 or, // at your option, any later version. See the LICENSE.txt file for the text of // the license. //----------------------------------------------------------------------------- // Definitions for all the types of commands that may be sent over USB; our // own protocol. //----------------------------------------------------------------------------- #ifndef __USB_CMD_H #define __USB_CMD_H #ifdef _MSC_VER typedef DWORD uint32_t; typedef BYTE uint8_t; #define PACKED // stuff #else #include #include #define PACKED __attribute__((packed)) #endif #define USB_CMD_DATA_SIZE 512 typedef struct { uint64_t cmd; uint64_t arg[3]; union { uint8_t asBytes[USB_CMD_DATA_SIZE]; uint32_t asDwords[USB_CMD_DATA_SIZE / 4]; } d; } PACKED UsbCommand; // A struct used to send sample-configs over USB typedef struct { uint8_t decimation; uint8_t bits_per_sample; bool averaging; int divisor; int trigger_threshold; } sample_config; typedef struct { uint16_t start_gap; uint16_t write_gap; uint16_t write_0; uint16_t write_1; uint16_t read_gap; } t55xx_config; // For the bootloader #define CMD_DEVICE_INFO 0x0000 #define CMD_SETUP_WRITE 0x0001 #define CMD_FINISH_WRITE 0x0003 #define CMD_HARDWARE_RESET 0x0004 #define CMD_START_FLASH 0x0005 #define CMD_NACK 0x00fe #define CMD_ACK 0x00ff // For general mucking around #define CMD_DEBUG_PRINT_STRING 0x0100 #define CMD_DEBUG_PRINT_INTEGERS 0x0101 #define CMD_DEBUG_PRINT_BYTES 0x0102 #define CMD_LCD_RESET 0x0103 #define CMD_LCD 0x0104 #define CMD_BUFF_CLEAR 0x0105 #define CMD_READ_MEM 0x0106 #define CMD_VERSION 0x0107 #define CMD_STATUS 0x0108 #define CMD_PING 0x0109 #define CMD_DOWNLOAD_EML_BIGBUF 0x0110 #define CMD_DOWNLOADED_EML_BIGBUF 0x0111 // RDV40, Flash memory operations #define CMD_FLASHMEM_READ 0x0120 #define CMD_FLASHMEM_WRITE 0x0121 #define CMD_FLASHMEM_WIPE 0x0122 #define CMD_FLASHMEM_DOWNLOAD 0x0123 #define CMD_FLASHMEM_DOWNLOADED 0x0124 #define CMD_FLASHMEM_INFO 0x0125 #define CMD_FLASHMEM_SET_SPIBAUDRATE 0x0126 // RDV40, Smart card operations #define CMD_SMART_RAW 0x0140 #define CMD_SMART_UPGRADE 0x0141 #define CMD_SMART_UPLOAD 0x0142 #define CMD_SMART_ATR 0x0143 #define CMD_SMART_SETBAUD 0x0144 #define CMD_SMART_SETCLOCK 0x0145 // RDV40, FPC serial #define CMD_FPC_SEND 0x0160 #define CMD_FPC_READ 0x0161 // For low-frequency tags #define CMD_READ_TI_TYPE 0x0202 #define CMD_WRITE_TI_TYPE 0x0203 #define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204 #define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205 #define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206 #define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207 #define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208 #define CMD_UPLOAD_SIM_SAMPLES_125K 0x0209 #define CMD_SIMULATE_TAG_125K 0x020A #define CMD_HID_DEMOD_FSK 0x020B #define CMD_HID_SIM_TAG 0x020C #define CMD_SET_LF_DIVISOR 0x020D #define CMD_LF_SIMULATE_BIDIR 0x020E #define CMD_SET_ADC_MUX 0x020F #define CMD_HID_CLONE_TAG 0x0210 #define CMD_EM410X_WRITE_TAG 0x0211 #define CMD_INDALA_CLONE_TAG 0x0212 // for 224 bits UID #define CMD_INDALA_CLONE_TAG_L 0x0213 #define CMD_T55XX_READ_BLOCK 0x0214 #define CMD_T55XX_WRITE_BLOCK 0x0215 #define CMD_T55XX_RESET_READ 0x0216 #define CMD_PCF7931_READ 0x0217 #define CMD_PCF7931_WRITE 0x0223 #define CMD_EM4X_READ_WORD 0x0218 #define CMD_EM4X_WRITE_WORD 0x0219 #define CMD_IO_DEMOD_FSK 0x021A #define CMD_IO_CLONE_TAG 0x021B #define CMD_EM410X_DEMOD 0x021c // Sampling configuration for LF reader/sniffer #define CMD_SET_LF_SAMPLING_CONFIG 0x021d #define CMD_FSK_SIM_TAG 0x021E #define CMD_ASK_SIM_TAG 0x021F #define CMD_PSK_SIM_TAG 0x0220 #define CMD_AWID_DEMOD_FSK 0x0221 #define CMD_VIKING_CLONE_TAG 0x0222 #define CMD_T55XX_WAKEUP 0x0224 #define CMD_COTAG 0x0225 #define CMD_SET_LF_T55XX_CONFIG 0x0226 #define CMD_T55XX_CHKPWDS 0x0230 /* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */ // For the 13.56 MHz tags #define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300 #define CMD_READ_SRI_TAG 0x0303 #define CMD_ISO_14443B_COMMAND 0x0305 #define CMD_READER_ISO_15693 0x0310 #define CMD_SIMTAG_ISO_15693 0x0311 #define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312 #define CMD_ISO_15693_COMMAND 0x0313 #define CMD_ISO_15693_COMMAND_DONE 0x0314 #define CMD_ISO_15693_FIND_AFI 0x0315 #define CMD_LF_SNIFF_RAW_ADC_SAMPLES 0x0317 // For Hitag2 transponders #define CMD_SNIFF_HITAG 0x0370 #define CMD_SIMULATE_HITAG 0x0371 #define CMD_READER_HITAG 0x0372 // For HitagS #define CMD_TEST_HITAGS_TRACES 0x0367 #define CMD_SIMULATE_HITAG_S 0x0368 #define CMD_READ_HITAG_S 0x0373 #define CMD_WR_HITAG_S 0x0375 #define CMD_EMU_HITAG_S 0x0376 #define CMD_ANTIFUZZ_ISO_14443a 0x0380 #define CMD_SIMULATE_TAG_ISO_14443B 0x0381 #define CMD_SNIFF_ISO_14443B 0x0382 #define CMD_SNIFF_ISO_14443a 0x0383 #define CMD_SIMULATE_TAG_ISO_14443a 0x0384 #define CMD_READER_ISO_14443a 0x0385 #define CMD_RAW_WRITER_LEGIC_RF 0x0386 #define CMD_SIMULATE_TAG_LEGIC_RF 0x0387 #define CMD_READER_LEGIC_RF 0x0388 #define CMD_WRITER_LEGIC_RF 0x0389 #define CMD_EPA_PACE_COLLECT_NONCE 0x038A #define CMD_EPA_PACE_REPLAY 0x038B #define CMD_LEGIC_INFO 0x03BC #define CMD_LEGIC_ESET 0x03BD #define CMD_LEGIC_EGET 0x03BE #define CMD_ICLASS_READCHECK 0x038F #define CMD_ICLASS_CLONE 0x0390 #define CMD_ICLASS_DUMP 0x0391 #define CMD_SNIFF_ICLASS 0x0392 #define CMD_SIMULATE_TAG_ICLASS 0x0393 #define CMD_READER_ICLASS 0x0394 #define CMD_READER_ICLASS_REPLAY 0x0395 #define CMD_ICLASS_READBLOCK 0x0396 #define CMD_ICLASS_WRITEBLOCK 0x0397 #define CMD_ICLASS_EML_MEMSET 0x0398 #define CMD_ICLASS_AUTHENTICATION 0x0399 #define CMD_ICLASS_CHECK_KEYS 0x039A // For ISO1092 / FeliCa #define CMD_FELICA_SIMULATE_TAG 0x03A0 #define CMD_FELICA_SNIFF 0x03A1 #define CMD_FELICA_COMMAND 0x03A2 //temp #define CMD_FELICA_LITE_DUMP 0x03AA #define CMD_FELICA_LITE_SIM 0x03AB // For measurements of the antenna tuning #define CMD_MEASURE_ANTENNA_TUNING 0x0400 #define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401 #define CMD_MEASURED_ANTENNA_TUNING 0x0410 #define CMD_LISTEN_READER_FIELD 0x0420 // For direct FPGA control #define CMD_FPGA_MAJOR_MODE_OFF 0x0500 // For mifare commands #define CMD_MIFARE_SET_DBGMODE 0x0600 #define CMD_MIFARE_EML_MEMCLR 0x0601 #define CMD_MIFARE_EML_MEMSET 0x0602 #define CMD_MIFARE_EML_MEMGET 0x0603 #define CMD_MIFARE_EML_CARDLOAD 0x0604 // magic chinese card commands #define CMD_MIFARE_CSETBLOCK 0x0605 #define CMD_MIFARE_CGETBLOCK 0x0606 #define CMD_MIFARE_CIDENT 0x0607 #define CMD_SIMULATE_MIFARE_CARD 0x0610 #define CMD_READER_MIFARE 0x0611 #define CMD_MIFARE_NESTED 0x0612 #define CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES 0x0613 #define CMD_MIFARE_ACQUIRE_NONCES 0x0614 #define CMD_MIFARE_READBL 0x0620 #define CMD_MIFAREU_READBL 0x0720 #define CMD_MIFARE_READSC 0x0621 #define CMD_MIFAREU_READCARD 0x0721 #define CMD_MIFARE_WRITEBL 0x0622 #define CMD_MIFAREU_WRITEBL 0x0722 #define CMD_MIFAREU_WRITEBL_COMPAT 0x0723 #define CMD_MIFARE_CHKKEYS 0x0623 #define CMD_MIFARE_SETMOD 0x0624 #define CMD_MIFARE_CHKKEYS_FAST 0x0625 #define CMD_MIFARE_SNIFFER 0x0630 //ultralightC #define CMD_MIFAREUC_AUTH 0x0724 //0x0725 and 0x0726 no longer used #define CMD_MIFAREUC_SETPWD 0x0727 // mifare desfire #define CMD_MIFARE_DESFIRE_READBL 0x0728 #define CMD_MIFARE_DESFIRE_WRITEBL 0x0729 #define CMD_MIFARE_DESFIRE_AUTH1 0x072a #define CMD_MIFARE_DESFIRE_AUTH2 0x072b #define CMD_MIFARE_DES_READER 0x072c #define CMD_MIFARE_DESFIRE_INFO 0x072d #define CMD_MIFARE_DESFIRE 0x072e #define CMD_MIFARE_COLLECT_NONCES 0x072f #define CMD_MIFARE_NACK_DETECT 0x0730 #define CMD_HF_SNIFFER 0x0800 // For EMV Commands #define CMD_EMV_READ_RECORD 0x0700 #define CMD_EMV_TRANSACTION 0x0701 #define CMD_EMV_CLONE 0x0702 #define CMD_EMV_SIM 0x0703 #define CMD_EMV_TEST 0x0704 #define CMD_EMV_FUZZ_RATS 0x0705 #define CMD_EMV_GET_RANDOM_NUM 0x0706 #define CMD_EMV_LOAD_VALUE 0x0707 #define CMD_EMV_DUMP_CARD 0x0708 #define CMD_UNKNOWN 0xFFFF //Mifare simulation flags #define FLAG_INTERACTIVE 0x01 #define FLAG_4B_UID_IN_DATA 0x02 #define FLAG_7B_UID_IN_DATA 0x04 #define FLAG_10B_UID_IN_DATA 0x08 #define FLAG_UID_IN_EMUL 0x10 #define FLAG_NR_AR_ATTACK 0x20 #define FLAG_RANDOM_NONCE 0x40 #define FLAG_MF_MINI 0x80 #define FLAG_MF_1K 0x100 #define FLAG_MF_2K 0x200 #define FLAG_MF_4K 0x400 //Iclass reader flags #define FLAG_ICLASS_READER_ONLY_ONCE 0x01 #define FLAG_ICLASS_READER_CC 0x02 #define FLAG_ICLASS_READER_CSN 0x04 #define FLAG_ICLASS_READER_CONF 0x08 #define FLAG_ICLASS_READER_AIA 0x10 #define FLAG_ICLASS_READER_ONE_TRY 0x20 #define FLAG_ICLASS_READER_CEDITKEY 0x40 // Dbprintf flags #define FLAG_RAWPRINT 0x0111 #define FLAG_NOOPT 0x0000 #define FLAG_NOLOG 0x0001 #define FLAG_NONEWLINE 0x0010 #define FLAG_NOPROMPT 0x0100 // CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions: /* Whether a bootloader that understands the common_area is present */ #define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0) /* Whether a osimage that understands the common_area is present */ #define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1) /* Set if the bootloader is currently executing */ #define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2) /* Set if the OS is currently executing */ #define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3) /* Set if this device understands the extend start flash command */ #define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4) /* CMD_START_FLASH may have three arguments: start of area to flash, end of area to flash, optional magic. The bootrom will not allow to overwrite itself unless this magic is given as third parameter */ #define START_FLASH_MAGIC 0x54494f44 // 'DOIT' #endif