//----------------------------------------------------------------------------- // Copyright (C) 2010 iZsh // // This code is licensed to you under the terms of the GNU GPL, version 2 or, // at your option, any later version. See the LICENSE.txt file for the text of // the license. //----------------------------------------------------------------------------- // Hardware commands // low-level hardware control //----------------------------------------------------------------------------- #include #include #include #include #include "cmdparser.h" // command_t #include "cliparser.h" #include "comms.h" #include "usart_defs.h" #include "ui.h" #include "cmdhw.h" #include "cmddata.h" #include "commonutil.h" #include "pm3_cmd.h" static int CmdHelp(const char *Cmd); static void lookupChipID(uint32_t iChipID, uint32_t mem_used) { char asBuff[120]; memset(asBuff, 0, sizeof(asBuff)); uint32_t mem_avail = 0; PrintAndLogEx(NORMAL, "\n [ " _YELLOW_("Hardware") " ]"); switch (iChipID) { case 0x270B0A40: sprintf(asBuff, "AT91SAM7S512 Rev A"); break; case 0x270B0A4F: sprintf(asBuff, "AT91SAM7S512 Rev B"); break; case 0x270D0940: sprintf(asBuff, "AT91SAM7S256 Rev A"); break; case 0x270B0941: sprintf(asBuff, "AT91SAM7S256 Rev B"); break; case 0x270B0942: sprintf(asBuff, "AT91SAM7S256 Rev C"); break; case 0x270B0943: sprintf(asBuff, "AT91SAM7S256 Rev D"); break; case 0x270C0740: sprintf(asBuff, "AT91SAM7S128 Rev A"); break; case 0x270A0741: sprintf(asBuff, "AT91SAM7S128 Rev B"); break; case 0x270A0742: sprintf(asBuff, "AT91SAM7S128 Rev C"); break; case 0x270A0743: sprintf(asBuff, "AT91SAM7S128 Rev D"); break; case 0x27090540: sprintf(asBuff, "AT91SAM7S64 Rev A"); break; case 0x27090543: sprintf(asBuff, "AT91SAM7S64 Rev B"); break; case 0x27090544: sprintf(asBuff, "AT91SAM7S64 Rev C"); break; case 0x27080342: sprintf(asBuff, "AT91SAM7S321 Rev A"); break; case 0x27080340: sprintf(asBuff, "AT91SAM7S32 Rev A"); break; case 0x27080341: sprintf(asBuff, "AT91SAM7S32 Rev B"); break; case 0x27050241: sprintf(asBuff, "AT9SAM7S161 Rev A"); break; case 0x27050240: sprintf(asBuff, "AT91SAM7S16 Rev A"); break; } PrintAndLogEx(NORMAL, " --= uC: " _YELLOW_("%s"), asBuff); switch ((iChipID & 0xE0) >> 5) { case 1: sprintf(asBuff, "ARM946ES"); break; case 2: sprintf(asBuff, "ARM7TDMI"); break; case 4: sprintf(asBuff, "ARM920T"); break; case 5: sprintf(asBuff, "ARM926EJS"); break; } PrintAndLogEx(NORMAL, " --= Embedded Processor: %s", asBuff); switch ((iChipID & 0xF0000) >> 16) { case 1: sprintf(asBuff, "1K bytes"); break; case 2: sprintf(asBuff, "2K bytes"); break; case 3: sprintf(asBuff, "6K bytes"); break; case 4: sprintf(asBuff, "112K bytes"); break; case 5: sprintf(asBuff, "4K bytes"); break; case 6: sprintf(asBuff, "80K bytes"); break; case 7: sprintf(asBuff, "160K bytes"); break; case 8: sprintf(asBuff, "8K bytes"); break; case 9: sprintf(asBuff, "16K bytes"); break; case 10: sprintf(asBuff, "32K bytes"); break; case 11: sprintf(asBuff, "64K bytes"); break; case 12: sprintf(asBuff, "128K bytes"); break; case 13: sprintf(asBuff, "256K bytes"); break; case 14: sprintf(asBuff, "96K bytes"); break; case 15: sprintf(asBuff, "512K bytes"); break; } PrintAndLogEx(NORMAL, " --= Internal SRAM size: %s", asBuff); switch ((iChipID & 0xFF00000) >> 20) { case 0x19: sprintf(asBuff, "AT91SAM9xx Series"); break; case 0x29: sprintf(asBuff, "AT91SAM9XExx Series"); break; case 0x34: sprintf(asBuff, "AT91x34 Series"); break; case 0x37: sprintf(asBuff, "CAP7 Series"); break; case 0x39: sprintf(asBuff, "CAP9 Series"); break; case 0x3B: sprintf(asBuff, "CAP11 Series"); break; case 0x40: sprintf(asBuff, "AT91x40 Series"); break; case 0x42: sprintf(asBuff, "AT91x42 Series"); break; case 0x55: sprintf(asBuff, "AT91x55 Series"); break; case 0x60: sprintf(asBuff, "AT91SAM7Axx Series"); break; case 0x61: sprintf(asBuff, "AT91SAM7AQxx Series"); break; case 0x63: sprintf(asBuff, "AT91x63 Series"); break; case 0x70: sprintf(asBuff, "AT91SAM7Sxx Series"); break; case 0x71: sprintf(asBuff, "AT91SAM7XCxx Series"); break; case 0x72: sprintf(asBuff, "AT91SAM7SExx Series"); break; case 0x73: sprintf(asBuff, "AT91SAM7Lxx Series"); break; case 0x75: sprintf(asBuff, "AT91SAM7Xxx Series"); break; case 0x92: sprintf(asBuff, "AT91x92 Series"); break; case 0xF0: sprintf(asBuff, "AT75Cxx Series"); break; } PrintAndLogEx(NORMAL, " --= Architecture identifier: %s", asBuff); switch ((iChipID & 0x70000000) >> 28) { case 0: sprintf(asBuff, "ROM"); break; case 1: sprintf(asBuff, "ROMless or on-chip Flash"); break; case 2: sprintf(asBuff, "Embedded Flash Memory"); break; case 3: sprintf(asBuff, "ROM and Embedded Flash Memory\nNVPSIZ is ROM size\nNVPSIZ2 is Flash size"); break; case 4: sprintf(asBuff, "SRAM emulating ROM"); break; } switch ((iChipID & 0xF00) >> 8) { case 0: mem_avail = 0; break; case 1: mem_avail = 8; break; case 2: mem_avail = 16; break; case 3: mem_avail = 32; break; case 5: mem_avail = 64; break; case 7: mem_avail = 128; break; case 9: mem_avail = 256; break; case 10: mem_avail = 512; break; case 12: mem_avail = 1024; break; case 14: mem_avail = 2048; break; } PrintAndLogEx(NORMAL, " --= Nonvolatile program memory: " _YELLOW_("%uK") " bytes %s ( " _YELLOW_("%2.0f%%") " used )" , mem_avail , asBuff , mem_avail == 0 ? 0.0f : (float)mem_used / (mem_avail * 1024) * 100 ); switch ((iChipID & 0xF000) >> 12) { case 0: sprintf(asBuff, "None"); break; case 1: sprintf(asBuff, "8K bytes"); break; case 2: sprintf(asBuff, "16K bytes"); break; case 3: sprintf(asBuff, "32K bytes"); break; case 5: sprintf(asBuff, "64K bytes"); break; case 7: sprintf(asBuff, "128K bytes"); break; case 9: sprintf(asBuff, "256K bytes"); break; case 10: sprintf(asBuff, "512K bytes"); break; case 12: sprintf(asBuff, "1024K bytes"); break; case 14: sprintf(asBuff, "2048K bytes"); break; } PrintAndLogEx(NORMAL, " --= Second nonvolatile program memory size: %s", asBuff); } static int CmdDbg(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw dbg", "Set device side debug level output.\n" "Note: option -4, this option may cause malfunction itself", "hw dbg -1\n" ); void *argtable[] = { arg_param_begin, arg_lit0("0", NULL, "no debug messages"), arg_lit0("1", NULL, "error messages"), arg_lit0("2", NULL, "plus information messages"), arg_lit0("3", NULL, "plus debug messages"), arg_lit0("4", NULL, "print even debug messages in timing critical functions"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); bool lv0 = arg_get_lit(ctx, 1); bool lv1 = arg_get_lit(ctx, 2); bool lv2 = arg_get_lit(ctx, 3); bool lv3 = arg_get_lit(ctx, 4); bool lv4 = arg_get_lit(ctx, 5); CLIParserFree(ctx); if ((lv0 + lv1 + lv2 + lv3 + lv4) > 1) { PrintAndLogEx(INFO, "Can only set one debug level"); return PM3_EINVARG; } uint8_t dbg = 0; if (lv0) dbg = 0; else if (lv1) dbg = 1; else if (lv2) dbg = 2; else if (lv3) dbg = 3; else if (lv4) dbg = 4; SendCommandNG(CMD_SET_DBGMODE, &dbg, sizeof(dbg)); return PM3_SUCCESS; } static int CmdDetectReader(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw detectreader", "Start to detect presences of reader field", "hw detectreader -L\n" ); void *argtable[] = { arg_param_begin, arg_lit0("L", "LF", "detect low frequence 125/134 kHz"), arg_lit0("H", "HF", "detect high frequence 13.56 MHZ"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); bool lf = arg_get_lit(ctx, 1); bool hf = arg_get_lit(ctx, 2); CLIParserFree(ctx); if ((lf + hf) > 1) { PrintAndLogEx(INFO, "Can only set one frequence"); return PM3_EINVARG; } uint8_t arg = 0; if (lf) arg = 1; else if (hf) arg = 2; PrintAndLogEx(INFO, "press pm3 button to change modes and finally exit"); clearCommandBuffer(); SendCommandNG(CMD_LISTEN_READER_FIELD, (uint8_t *)&arg, sizeof(arg)); return PM3_SUCCESS; } // ## FPGA Control static int CmdFPGAOff(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw fpgaoff", "Turn of fpga and antenna field", "hw fpgaoff\n" ); void *argtable[] = { arg_param_begin, arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); CLIParserFree(ctx); clearCommandBuffer(); SendCommandNG(CMD_FPGA_MAJOR_MODE_OFF, NULL, 0); return PM3_SUCCESS; } static int CmdLCD(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw lcd", "Send command/data to LCD", "hw lcd -r AA -c 03 -> sends 0xAA three times" ); void *argtable[] = { arg_param_begin, arg_int1("r", "raw", "", "data "), arg_int1("c", "cnt", "", "number of times to send"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); CLIParserFree(ctx); int r_len = 0; uint8_t raw[1] = {0}; CLIGetHexWithReturn(ctx, 1, raw, &r_len); int j = arg_get_int(ctx, 2); if (j < 1) { PrintAndLogEx(WARNING, "Count must be larger than zero"); return PM3_EINVARG; } while (j--) { clearCommandBuffer(); SendCommandMIX(CMD_LCD, raw[0], 0, 0, NULL, 0); } return PM3_SUCCESS; } static int CmdLCDReset(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw lcdreset", "Hardware reset LCD", "hw lcdreset\n" ); void *argtable[] = { arg_param_begin, arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); CLIParserFree(ctx); clearCommandBuffer(); SendCommandNG(CMD_LCD_RESET, NULL, 0); return PM3_SUCCESS; } static int CmdReadmem(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw readmem", "Read memory at decimal address from ARM chip flash.", "hw readmem -a 10000" ); void *argtable[] = { arg_param_begin, arg_u64_1("a", "adr", "", "address to read"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); uint32_t address = arg_get_u32(ctx, 1); CLIParserFree(ctx); clearCommandBuffer(); SendCommandNG(CMD_READ_MEM, (uint8_t *)&address, sizeof(address)); return PM3_SUCCESS; } static int CmdReset(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw reset", "Reset the Proxmark3 device.", "hw reset" ); void *argtable[] = { arg_param_begin, arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); CLIParserFree(ctx); clearCommandBuffer(); SendCommandNG(CMD_HARDWARE_RESET, NULL, 0); PrintAndLogEx(INFO, "Proxmark3 has been reset."); return PM3_SUCCESS; } /* * Sets the divisor for LF frequency clock: lets the user choose any LF frequency below * 600kHz. */ static int CmdSetDivisor(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw setlfdivisor", "Drive LF antenna at 12 MHz / (divisor + 1).", "hw setlfdivisor -d 88" ); void *argtable[] = { arg_param_begin, arg_u64_1("d", "div", "", "19 - 255 divisor value (def 95)"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); uint8_t arg = arg_get_u32_def(ctx, 1, 95); CLIParserFree(ctx); if (arg < 19) { PrintAndLogEx(ERR, "Divisor must be between" _YELLOW_("19") " and " _YELLOW_("255")); return PM3_EINVARG; } // 12 000 000 (12MHz) clearCommandBuffer(); SendCommandNG(CMD_LF_SET_DIVISOR, (uint8_t *)&arg, sizeof(arg)); PrintAndLogEx(SUCCESS, "Divisor set, expected " _YELLOW_("%.1f")" kHz", ((double)12000 / (arg + 1))); return PM3_SUCCESS; } static int CmdSetMux(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw setmux", "Set the ADC mux to a specific value", "hw setmux --hiraw -> set HIGH RAW" ); void *argtable[] = { arg_param_begin, arg_lit0(NULL, "lopkd", "low peak"), arg_lit0(NULL, "loraw", "low raw"), arg_lit0(NULL, "hipkd", "high peak"), arg_lit0(NULL, "hiraw", "high raw"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); bool lopkd = arg_get_lit(ctx, 1); bool loraw = arg_get_lit(ctx, 2); bool hipkd = arg_get_lit(ctx, 3); bool hiraw = arg_get_lit(ctx, 4); CLIParserFree(ctx); if ((lopkd + loraw + hipkd + hiraw) > 1) { PrintAndLogEx(INFO, "Can only set one mux"); return PM3_EINVARG; } uint8_t arg = 0; if (lopkd) arg = 0; else if (loraw) arg = 1; else if (hipkd) arg = 2; else if (hiraw) arg = 3; clearCommandBuffer(); SendCommandNG(CMD_SET_ADC_MUX, (uint8_t *)&arg, sizeof(arg)); return PM3_SUCCESS; } static int CmdStandalone(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw standalone", "Start standalone mode", "hw standalone -> start \n" "hw standalone -a 1 -> start and send arg 1" ); void *argtable[] = { arg_param_begin, arg_u64_0("a", "arg", "", "argument byte"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); uint8_t arg = arg_get_u32(ctx, 1); CLIParserFree(ctx); clearCommandBuffer(); SendCommandNG(CMD_STANDALONE, (uint8_t *)&arg, sizeof(arg)); return PM3_SUCCESS; } static int CmdTune(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw tune", "Measure antenna tuning", "hw tune" ); void *argtable[] = { arg_param_begin, arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); CLIParserFree(ctx); return CmdTuneSamples(Cmd); } static int CmdVersion(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw version", "Show version information about the connected Proxmark3", "hw version" ); void *argtable[] = { arg_param_begin, arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); CLIParserFree(ctx); pm3_version(true, false); return PM3_SUCCESS; } static int CmdStatus(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw status", "Show runtime status information about the connected Proxmark3", "hw status" ); void *argtable[] = { arg_param_begin, arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); CLIParserFree(ctx); clearCommandBuffer(); PacketResponseNG resp; SendCommandNG(CMD_STATUS, NULL, 0); if (WaitForResponseTimeout(CMD_STATUS, &resp, 2000) == false) { PrintAndLogEx(WARNING, "Status command timeout. Communication speed test timed out"); return PM3_ETIMEOUT; } return PM3_SUCCESS; } int handle_tearoff(tearoff_params_t *params, bool verbose) { if (params == NULL) return PM3_EINVARG; clearCommandBuffer(); SendCommandNG(CMD_SET_TEAROFF, (uint8_t *)params, sizeof(tearoff_params_t)); PacketResponseNG resp; if (WaitForResponseTimeout(CMD_SET_TEAROFF, &resp, 500) == false) { PrintAndLogEx(WARNING, "Tear-off command timeout."); return PM3_ETIMEOUT; } if (resp.status == PM3_SUCCESS) { if (params->delay_us > 0 && verbose) PrintAndLogEx(INFO, "Tear-off hook configured with delay of " _GREEN_("%i us"), params->delay_us); if (params->on && verbose) PrintAndLogEx(INFO, "Tear-off hook " _GREEN_("enabled")); if (params->off && verbose) PrintAndLogEx(INFO, "Tear-off hook " _RED_("disabled")); } else if (verbose) PrintAndLogEx(WARNING, "Tear-off command failed."); return resp.status; } static int CmdTearoff(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw tearoff", "Configure a tear-off hook for the next write command supporting tear-off\n" "After having been triggered by a write command, the tear-off hook is deactivated\n" "Delay (in us) must be between 1 and 43000 (43ms). Precision is about 1/3us.", "hw tearoff --delay 1200 --> define delay of 1200us\n" "hw tearoff --on --> (re)activate a previously defined delay\n" "hw tearoff --off --> deactivate a previously activated but not yet triggered hook\n"); void *argtable[] = { arg_param_begin, arg_int0(NULL, "delay", "", "Delay in us before triggering tear-off, must be between 1 and 43000"), arg_lit0(NULL, "on", "Activate tear-off hook"), arg_lit0(NULL, "off", "Deactivate tear-off hook"), arg_lit0("s", "silent", "less verbose output"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, false); tearoff_params_t params; int delay = arg_get_int_def(ctx, 1, -1); params.on = arg_get_lit(ctx, 2); params.off = arg_get_lit(ctx, 3); bool silent = arg_get_lit(ctx, 4); CLIParserFree(ctx); if (delay != -1) { if ((delay < 1) || (delay > 43000)) { PrintAndLogEx(WARNING, "You can't set delay out of 1..43000 range!"); return PM3_EINVARG; } } else { delay = 0; // will be ignored by ARM } params.delay_us = delay; if (params.on && params.off) { PrintAndLogEx(WARNING, "You can't set both --on and --off!"); return PM3_EINVARG; } return handle_tearoff(¶ms, !silent); } static int CmdTia(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw tia", "Trigger a Timing Interval Acquisition to re-adjust the RealTimeCounter divider", "hw tia" ); void *argtable[] = { arg_param_begin, arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); CLIParserFree(ctx); PrintAndLogEx(INFO, "Triggering new Timing Interval Acquisition (TIA)..."); clearCommandBuffer(); SendCommandNG(CMD_TIA, NULL, 0); PacketResponseNG resp; if (WaitForResponseTimeout(CMD_TIA, &resp, 2000) == false) { PrintAndLogEx(WARNING, "TIA command timeout. You probably need to unplug the Proxmark3."); return PM3_ETIMEOUT; } PrintAndLogEx(INFO, "TIA done."); return PM3_SUCCESS; } static int CmdPing(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw ping", "Test if the Proxmark3 is responsive", "hw ping\n" "hw ping --len 32" ); void *argtable[] = { arg_param_begin, arg_u64_0("l", "len", "", "length of payload to send"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); uint32_t len = arg_get_u32(ctx, 1); CLIParserFree(ctx); if (len > PM3_CMD_DATA_SIZE) len = PM3_CMD_DATA_SIZE; if (len) { PrintAndLogEx(INFO, "Ping sent with payload len " _YELLOW_("%d"), len); } else { PrintAndLogEx(INFO, "Ping sent"); } clearCommandBuffer(); PacketResponseNG resp; uint8_t data[PM3_CMD_DATA_SIZE] = {0}; for (uint16_t i = 0; i < len; i++) data[i] = i & 0xFF; SendCommandNG(CMD_PING, data, len); if (WaitForResponseTimeout(CMD_PING, &resp, 1000)) { if (len) { bool error = (memcmp(data, resp.data.asBytes, len) != 0); PrintAndLogEx((error) ? ERR : SUCCESS, "Ping response " _GREEN_("received") " and content is %s", error ? _RED_("NOT ok") : _GREEN_("OK")); } else { PrintAndLogEx(SUCCESS, "Ping response " _GREEN_("received")); } } else PrintAndLogEx(WARNING, "Ping response " _RED_("timeout")); return PM3_SUCCESS; } static int CmdConnect(const char *Cmd) { CLIParserContext *ctx; CLIParserInit(&ctx, "hw connect", "Connects to a Proxmark3 device via specified serial port.\n" "Baudrate here is only for physical UART or UART-BT, NOT for USB-CDC or blue shark add-on", "hw connect -p "SERIAL_PORT_EXAMPLE_H"\n" "hw connect -p "SERIAL_PORT_EXAMPLE_H" -b 115200" ); void *argtable[] = { arg_param_begin, arg_str0("p", "port", NULL, "Serial port to connect to, else retry the last used one"), arg_u64_0("b", "baud", "", "Baudrate"), arg_param_end }; CLIExecWithReturn(ctx, Cmd, argtable, true); int p_len = FILE_PATH_SIZE; char port[FILE_PATH_SIZE] = {0}; CLIGetStrWithReturn(ctx, 1, (uint8_t *)port, &p_len); uint32_t baudrate = arg_get_u32_def(ctx, 2, USART_BAUD_RATE); CLIParserFree(ctx); if (baudrate == 0) { PrintAndLogEx(WARNING, "Baudrate can't be zero"); return PM3_EINVARG; } // default back to previous used serial port if (strlen(port) == 0) { if (strlen(conn.serial_port_name) == 0) { PrintAndLogEx(WARNING, "Must specify a serial port"); return PM3_EINVARG; } memcpy(port, conn.serial_port_name, sizeof(port)); } if (session.pm3_present) { CloseProxmark(session.current_device); } // 10 second timeout OpenProxmark(&session.current_device, port, false, 10, false, baudrate); if (session.pm3_present && (TestProxmark(session.current_device) != PM3_SUCCESS)) { PrintAndLogEx(ERR, _RED_("ERROR:") " cannot communicate with the Proxmark3\n"); CloseProxmark(session.current_device); return PM3_ENOTTY; } return PM3_SUCCESS; } static command_t CommandTable[] = { {"-------------", CmdHelp, AlwaysAvailable, "----------------------- " _CYAN_("Hardware") " -----------------------"}, {"help", CmdHelp, AlwaysAvailable, "This help"}, {"connect", CmdConnect, AlwaysAvailable, "Connect Proxmark3 to serial port"}, {"dbg", CmdDbg, IfPm3Present, "Set Proxmark3 debug level"}, {"detectreader", CmdDetectReader, IfPm3Present, "Detect external reader field"}, {"fpgaoff", CmdFPGAOff, IfPm3Present, "Set FPGA off"}, {"lcd", CmdLCD, IfPm3Lcd, "Send command/data to LCD"}, {"lcdreset", CmdLCDReset, IfPm3Lcd, "Hardware reset LCD"}, {"ping", CmdPing, IfPm3Present, "Test if the Proxmark3 is responsive"}, {"readmem", CmdReadmem, IfPm3Present, "Read memory at decimal address from flash"}, {"reset", CmdReset, IfPm3Present, "Reset the Proxmark3"}, {"setlfdivisor", CmdSetDivisor, IfPm3Present, "Drive LF antenna at 12MHz / (divisor + 1)"}, {"setmux", CmdSetMux, IfPm3Present, "Set the ADC mux to a specific value"}, {"standalone", CmdStandalone, IfPm3Present, "Jump to the standalone mode"}, {"status", CmdStatus, IfPm3Present, "Show runtime status information about the connected Proxmark3"}, {"tearoff", CmdTearoff, IfPm3Present, "Program a tearoff hook for the next command supporting tearoff"}, {"tia", CmdTia, IfPm3Present, "Trigger a Timing Interval Acquisition to re-adjust the RealTimeCounter divider"}, {"tune", CmdTune, IfPm3Present, "Measure antenna tuning"}, {"version", CmdVersion, IfPm3Present, "Show version information about the connected Proxmark3"}, {NULL, NULL, NULL, NULL} }; static int CmdHelp(const char *Cmd) { (void)Cmd; // Cmd is not used so far CmdsHelp(CommandTable); return PM3_SUCCESS; } int CmdHW(const char *Cmd) { clearCommandBuffer(); return CmdsParse(CommandTable, Cmd); } void pm3_version(bool verbose, bool oneliner) { #if defined(__MINGW64__) # define PM3CLIENTCOMPILER "MinGW-w64 " #elif defined(__MINGW32__) # define PM3CLIENTCOMPILER "MinGW " #elif defined(__clang__) # define PM3CLIENTCOMPILER "Clang/LLVM " #elif defined(__GNUC__) || defined(__GNUG__) # define PM3CLIENTCOMPILER "GCC " #else # define PM3CLIENTCOMPILER "unknown compiler " #endif #if defined(__APPLE__) || defined(__MACH__) # define PM3HOSTOS " OS:OSX" #elif defined(__ANDROID__) || defined(ANDROID) // must be tested before __linux__ # define PM3HOSTOS " OS:Android" #elif defined(__linux__) # define PM3HOSTOS " OS:Linux" #elif defined(__FreeBSD__) # define PM3HOSTOS " OS:FreeBSD" #elif defined(__NetBSD__) # define PM3HOSTOS " OS:NetBSD" #elif defined(__OpenBSD__) # define PM3HOSTOS " OS:OpenBSD" #elif defined(__CYGWIN__) # define PM3HOSTOS " OS:Cygwin" #elif defined(_WIN64) || defined(__WIN64__) // must be tested before _WIN32 # define PM3HOSTOS " OS:Windows (64b)" #elif defined(_WIN32) || defined(__WIN32__) # define PM3HOSTOS " OS:Windows (32b)" #else # define PM3HOSTOS " OS:unknown" #endif #if defined(__x86_64__) # define PM3HOSTARCH " ARCH:x86_64" #elif defined(__i386__) # define PM3HOSTARCH " ARCH:x86" #elif defined(__aarch64__) # define PM3HOSTARCH " ARCH:aarch64" #elif defined(__arm__) # define PM3HOSTARCH " ARCH:arm" #elif defined(__powerpc64__) # define PM3HOSTARCH " ARCH:powerpc64" #elif defined(__mips__) # define PM3HOSTARCH " ARCH:mips" #else # define PM3HOSTARCH " ARCH:unknown" #endif if (oneliner) { // For "proxmark3 -v", simple printf, avoid logging char temp[PM3_CMD_DATA_SIZE - 12]; // same limit as for ARM image FormatVersionInformation(temp, sizeof(temp), "Client: ", &version_information); PrintAndLogEx(NORMAL, "%s compiled with " PM3CLIENTCOMPILER __VERSION__ PM3HOSTOS PM3HOSTARCH "\n", temp); return; } if (!verbose) return; PacketResponseNG resp; clearCommandBuffer(); SendCommandNG(CMD_VERSION, NULL, 0); if (WaitForResponseTimeout(CMD_VERSION, &resp, 1000)) { char temp[PM3_CMD_DATA_SIZE - 12]; // same limit as for ARM image PrintAndLogEx(NORMAL, "\n [ " _CYAN_("Proxmark3 RFID instrument") " ]"); PrintAndLogEx(NORMAL, "\n [ " _YELLOW_("CLIENT") " ]"); FormatVersionInformation(temp, sizeof(temp), " client: ", &version_information); PrintAndLogEx(NORMAL, "%s", temp); PrintAndLogEx(NORMAL, " compiled with " PM3CLIENTCOMPILER __VERSION__ PM3HOSTOS PM3HOSTARCH); PrintAndLogEx(NORMAL, "\n [ " _YELLOW_("PROXMARK3") " ]"); if (IfPm3Rdv4Fw() == false) { PrintAndLogEx(NORMAL, " firmware.................. %s", _YELLOW_("PM3GENERIC")); if (IfPm3FpcUsartHost()) { PrintAndLogEx(NORMAL, " FPC USART for BT add-on... %s", _GREEN_("present")); } } else { PrintAndLogEx(NORMAL, " firmware.................. %s", _YELLOW_("PM3RDV4")); PrintAndLogEx(NORMAL, " external flash............ %s", IfPm3Flash() ? _GREEN_("present") : _YELLOW_("absent")); PrintAndLogEx(NORMAL, " smartcard reader.......... %s", IfPm3Smartcard() ? _GREEN_("present") : _YELLOW_("absent")); PrintAndLogEx(NORMAL, " FPC USART for BT add-on... %s", IfPm3FpcUsartHost() ? _GREEN_("present") : _YELLOW_("absent")); } if (IfPm3FpcUsartDevFromUsb()) { PrintAndLogEx(NORMAL, " FPC USART for developer... %s", _GREEN_("present")); } PrintAndLogEx(NORMAL, ""); struct p { uint32_t id; uint32_t section_size; uint32_t versionstr_len; char versionstr[PM3_CMD_DATA_SIZE - 12]; } PACKED; struct p *payload = (struct p *)&resp.data.asBytes; PrintAndLogEx(NORMAL, payload->versionstr); lookupChipID(payload->id, payload->section_size); } PrintAndLogEx(NORMAL, "\n"); }