Proxmark3 RDV40 dedicated repo, based on iceman fork =============== [](https://github.com/RfidResearchGroup/proxmark3/releases/latest) ## Notice This repo is based on iceman fork for proxmark3. It is dedicated to bring the most out of the new features for proxmark3 RDV40 device. ## Coverity Scan Config & Run Download the Coverity Scan Self-buld and install it. You will need to configure ARM-NON-EABI- Compiler for it to use: - Configure `cov-configure --comptype gcc --compiler /opt/devkitpro/devkitARM/bin/arm-none-eabi-gcc` - Run it (I'm running on Ubuntu) `cov-build --dir cov-int make all` - Make a tarball `tar czvf proxmark3.tgz cov-int` - Upload it to coverity.com ## Whats changed? * added flash memory 256kb. * added smart card module * added FPC connector --- ## Why didn't you based it on offical PM3 Master? The separation from offical pm3 repo gives us very much freedom to create a firmware/client that suits the RDV40 features. We don't want to mess up the offical pm3 repo with RDV40 specific code. ## Why don't you add this or that functionality? Give us a hint, and we'll see if we can't merge in the stuff you have. ## PM3 GUI The official PM3-GUI from Gaucho will not work. The new universial GUI will work. ## Development This fork now compiles just fine on - Windows/mingw environment with Qt5.6.1 & GCC 4.8 - Ubuntu 1404, 1510, 1604 - Mac OS X / Homebrew - Docker container ## Setup and build for UBUNTU GC made updates to allow this to build easily on Ubuntu 14.04.2 LTS, 15.10 or 16.04 See https://github.com/Proxmark/proxmark3/wiki/Ubuntu%20Linux A nice and cool install script made by @daveio is found here: https://github.com/daveio/attacksurface/blob/master/proxmark3/pm3-setup.sh I have also added this script to the fork. https://github.com/RfidResearchGroup/proxmark3/blob/master/install.sh - Run `sudo apt-get install p7zip git build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget libncurses5-dev gcc-arm-none-eabi` - Clone fork `git clone https://github.com/RfidResearchGroup/proxmark3.git` - Get the latest commits `git pull` - Install the blacklist rules and add user to dialout group (if you on a Linux/ubuntu/debian). If you do this one, you need to logout and login in again to make sure your rights got changed. `make udev` - Clean and complete compilation `make clean && make all` - Flash the BOOTROM & FULLIMAGE `client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf` - Change into the client folder `cd client` - Run the client `./proxmark3 /dev/ttyACM0` ## Setup and build for ArchLinux - Run `sudo pacman -Sy base-devel p7zip libusb readline ncurses arm-none-eabi-newlib --needed` `yaourt -S termcap` - Clone fork `git clone https://github.com/RfidResearchGroup/proxmark3.git` - Get the latest commits `git pull` - Install the blacklist rules and add user to dialout group (if you on a Linux/ubuntu/debian). If you do this one, you need to logout and login in again to make sure your rights got changed. `make udev` - Clean and complete compilation `make clean && make all` - Flash the BOOTROM & FULLIMAGE `client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf` - Change into the client folder `cd client` - Run the client `./proxmark3 /dev/ttyACM0` ## Homebrew (Mac OS X) These instructions comes from @Chrisfu, where I got the proxmark3.rb scriptfile from. Further questions about Mac & Homebrew, contact @Chrisfu (https://github.com/chrisfu/) 1. Install homebrew if you haven't yet already done so: http://brew.sh/ 2. Tap this repo: `brew tap RfidResearchGroup/proxmark3` 3. Install Proxmark3: `brew install proxmark3` for stable release or `brew install --HEAD proxmark3` for latest non-stable from GitHub. Upgrading HomeBrew tap formula ----------------------------- *This method is useful for those looking to run bleeding-edge versions of iceman's client. Keep this in mind when attempting to update your HomeBrew tap formula as this procedure could easily cause a build to break if an update is unstable on macOS.* Tested on macOS High Sierra 10.13.2 *Note: This assumes you have already installed iceman's fork from HomeBrew as mentioned above* 1. Force HomeBrew to pull the latest source from github `brew upgrade --fetch-HEAD RfidResearchGroup/proxmark3` 2. Flash the bootloader & fullimage.elf * With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark 3 as you plug it into a USB port. Continue to hold the button until after this step is complete and the `proxmark3-flasher` command outputs "Have a nice day!"* `$ sudo proxmark3-flasher /dev/tty.usbmodem881 -b /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/bootrom.elf /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/fullimage.elf` `$ sudo proxmark3-flasher /dev/tty.usbmodem881 ` 4. Enjoy the update ## Building on Windows ### Gator96100 distro Rather than download and install every one of these packages, a new ProxSpace environment archive file will be made available for download on the project page at @Gator96100's repo Afterwards just clone the iceman repo or download someone elses. Read instructions on @Gator96100 repo page. (https://github.com/Gator96100/ProxSpace/) Links - https://github.com/Gator96100/ProxSpace/archive/master.zip - https://github.com/Gator96100/ProxSpace/releases/tag/v2.2 (release v2.2 with gcc v5.3.0 arm-none-eabi-gcc v7.1.0) ### 7. Build and run - Clone fork `git clone https://github.com/RfidResearchGroup/proxmark3.git` - Get the latest commits `git pull` - CLEAN COMPILE `make clean && make all` Assuming you have Proxmark3 Windows drivers installed you can run the Proxmark software where "X" is the com port number assigned to proxmark3 under Windows. - Flash the BOOTROM & FULLIMAGE `client/flasher.exe comX -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf` - Change into the client folder `cd client` - Run the client `proxmark3.exe comX` iceman at host iuse.se July 2018, Sweden