RfidResearchGroup/proxmark3
1
1
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2024-11-11 01:55:38 +08:00
Code Issues Projects Releases Packages Wiki Activity
proxmark3/armsrc/legicrf.c

1622 lines
No EOL
40 KiB
C
Raw Blame History

//-----------------------------------------------------------------------------
// (c) 2009 Henryk Plötz <henryk@ploetzli.ch>
// 2016 Iceman
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// LEGIC RF simulation code
//-----------------------------------------------------------------------------
#include "legicrf.h"
static struct legic_frame {
uint8_t bits;
uint32_t data;
} current_frame;
static enum {
STATE_DISCON,
STATE_IV,
STATE_CON,
} legic_state;
static crc_t legic_crc;
static int legic_read_count;
static uint32_t legic_prng_bc;
static uint32_t legic_prng_iv;
static int legic_phase_drift;
static int legic_frame_drift;
static int legic_reqresp_drift;
AT91PS_TC timer;
AT91PS_TC prng_timer;
/*
static void setup_timer(void) {
// Set up Timer 1 to use for measuring time between pulses. Since we're bit-banging
// this it won't be terribly accurate but should be good enough.
//
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
timer = AT91C_BASE_TC1;
timer->TC_CCR = AT91C_TC_CLKDIS;
timer->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK;
timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
//
// Set up Timer 2 to use for measuring time between frames in
// tag simulation mode. Runs 4x faster as Timer 1
//
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC2);
prng_timer = AT91C_BASE_TC2;
prng_timer->TC_CCR = AT91C_TC_CLKDIS;
prng_timer->TC_CMR = AT91C_TC_CLKS_TIMER_DIV2_CLOCK;
prng_timer->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
}
AT91C_BASE_PMC->PMC_PCER |= (0x1 << 12) | (0x1 << 13) | (0x1 << 14);
AT91C_BASE_TCB->TCB_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_TIOA0 | AT91C_TCB_TC2XC2S_NONE;
// fast clock
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS; // timer disable
AT91C_BASE_TC0->TC_CMR = AT91C_TC_CLKS_TIMER_DIV3_CLOCK | // MCK(48MHz)/32 -- tick=1.5mks
AT91C_TC_WAVE | AT91C_TC_WAVESEL_UP_AUTO | AT91C_TC_ACPA_CLEAR |
AT91C_TC_ACPC_SET | AT91C_TC_ASWTRG_SET;
AT91C_BASE_TC0->TC_RA = 1;
AT91C_BASE_TC0->TC_RC = 0xBFFF + 1; // 0xC000
*/
// At TIMER_CLOCK3 (MCK/32)
// testing calculating in ticks. 1.5ticks = 1us
#define RWD_TIME_1 120 // READER_TIME_PAUSE 20us off, 80us on = 100us 80 * 1.5 == 120ticks
#define RWD_TIME_0 60 // READER_TIME_PAUSE 20us off, 40us on = 60us 40 * 1.5 == 60ticks
#define RWD_TIME_PAUSE 30 // 20us == 20 * 1.5 == 30ticks */
#define TAG_BIT_PERIOD 142 // 100us == 100 * 1.5 == 150ticks
#define TAG_FRAME_WAIT 495 // 330us from READER frame end to TAG frame start. 330 * 1.5 == 495
#define RWD_TIME_FUZZ 20 // rather generous 13us, since the peak detector + hysteresis fuzz quite a bit
#define SIM_DIVISOR 586 /* prng_time/SIM_DIVISOR count prng needs to be forwared */
#define SIM_SHIFT 900 /* prng_time+SIM_SHIFT shift of delayed start */
#define OFFSET_LOG 1024
#define FUZZ_EQUAL(value, target, fuzz) ((value) > ((target)-(fuzz)) && (value) < ((target)+(fuzz)))
#ifndef SHORT_COIL
# define SHORT_COIL LOW(GPIO_SSC_DOUT);
#endif
#ifndef OPEN_COIL
# define OPEN_COIL HIGH(GPIO_SSC_DOUT);
#endif
#ifndef LINE_IN
# define LINE_IN AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN;
#endif
// Pause pulse, off in 20us / 30ticks,
// ONE / ZERO bit pulse,
// one == 80us / 120ticks
// zero == 40us / 60ticks
#ifndef COIL_PULSE
# define COIL_PULSE(x) \
do { \
SHORT_COIL; \
WaitTicks( (RWD_TIME_PAUSE) ); \
OPEN_COIL; \
WaitTicks((x)); \
} while (0);
#endif
// ToDo: define a meaningful maximum size for auth_table. The bigger this is, the lower will be the available memory for traces.
// Historically it used to be FREE_BUFFER_SIZE, which was 2744.
#define LEGIC_CARD_MEMSIZE 1024
static uint8_t* cardmem;
static void frame_append_bit(struct legic_frame * const f, uint8_t bit) {
// Overflow, won't happen
if (f->bits >= 31) return;
f->data |= (bit << f->bits);
f->bits++;
}
static void frame_clean(struct legic_frame * const f) {
f->data = 0;
f->bits = 0;
}
// Prng works when waiting in 99.1us cycles.
// and while sending/receiving in bit frames (100, 60)
/*static void CalibratePrng( uint32_t time){
// Calculate Cycles based on timer 100us
uint32_t i = (time - sendFrameStop) / 100 ;
// substract cycles of finished frames
int k = i - legic_prng_count()+1;
// substract current frame length, rewind to beginning
if ( k > 0 )
legic_prng_forward(k);
}
*/
/* Generate Keystream */
uint32_t get_key_stream(int skip, int count) {
int i;
// Use int to enlarge timer tc to 32bit
legic_prng_bc += prng_timer->TC_CV;
// reset the prng timer.
/* If skip == -1, forward prng time based */
if(skip == -1) {
i = (legic_prng_bc + SIM_SHIFT)/SIM_DIVISOR; /* Calculate Cycles based on timer */
i -= legic_prng_count(); /* substract cycles of finished frames */
i -= count; /* substract current frame length, rewind to beginning */
legic_prng_forward(i);
} else {
legic_prng_forward(skip);
}
i = (count == 6) ? -1 : legic_read_count;
/* Generate KeyStream */
return legic_prng_get_bits(count);
}
/* Send a frame in tag mode, the FPGA must have been set up by
* LegicRfSimulate
*/
void frame_send_tag(uint16_t response, uint8_t bits) {
uint16_t mask = 1;
/* Bitbang the response */
SHORT_COIL;
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
/* TAG_FRAME_WAIT -> shift by 2 */
legic_prng_forward(3);
response ^= legic_prng_get_bits(bits);
/* Wait for the frame start */
WaitTicks( TAG_FRAME_WAIT );
for (; mask < BITMASK(bits); mask <<= 1) {
if (response & mask)
OPEN_COIL
else
SHORT_COIL
WaitTicks(TAG_BIT_PERIOD);
}
SHORT_COIL;
}
/* Send a frame in reader mode, the FPGA must have been set up by
* LegicRfReader
*/
void frame_sendAsReader(uint32_t data, uint8_t bits){
uint32_t starttime = GET_TICKS, send = 0, mask = 1;
// xor lsfr onto data.
send = data ^ legic_prng_get_bits(bits);
for (; mask < BITMASK(bits); mask <<= 1) {
if (send & mask)
COIL_PULSE(RWD_TIME_1)
else
COIL_PULSE(RWD_TIME_0)
}
// Final pause to mark the end of the frame
COIL_PULSE(0);
// log
uint8_t cmdbytes[] = {bits, BYTEx(data,0), BYTEx(data,1), BYTEx(data,2), BYTEx(send,0), BYTEx(send,1), BYTEx(send,2)};
LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, true);
}
/* Receive a frame from the card in reader emulation mode, the FPGA and
* timer must have been set up by LegicRfReader and frame_sendAsReader.
*
* The LEGIC RF protocol from card to reader does not include explicit
* frame start/stop information or length information. The reader must
* know beforehand how many bits it wants to receive. (Notably: a card
* sending a stream of 0-bits is indistinguishable from no card present.)
*
* Receive methodology: There is a fancy correlator in hi_read_rx_xcorr, but
* I'm not smart enough to use it. Instead I have patched hi_read_tx to output
* the ADC signal with hysteresis on SSP_DIN. Bit-bang that signal and look
* for edges. Count the edges in each bit interval. If they are approximately
* 0 this was a 0-bit, if they are approximately equal to the number of edges
* expected for a 212kHz subcarrier, this was a 1-bit. For timing we use the
* timer that's still running from frame_sendAsReader in order to get a synchronization
* with the frame that we just sent.
*
* FIXME: Because we're relying on the hysteresis to just do the right thing
* the range is severely reduced (and you'll probably also need a good antenna).
* So this should be fixed some time in the future for a proper receiver.
*/
static void frame_receiveAsReader(struct legic_frame * const f, uint8_t bits) {
if ( bits > 32 ) return;
uint8_t i = bits, edges = 0;
uint32_t the_bit = 1, next_bit_at = 0, data = 0;
uint32_t old_level = 0;
volatile uint32_t level = 0;
frame_clean(f);
// calibrate the prng.
legic_prng_forward(2);
data = legic_prng_get_bits(bits);
//FIXED time between sending frame and now listening frame. 330us
uint32_t starttime = GET_TICKS;
// its about 9+9 ticks delay from end-send to here.
WaitTicks( 477 );
next_bit_at = GET_TICKS + TAG_BIT_PERIOD;
while ( i-- ){
edges = 0;
while ( GET_TICKS < next_bit_at) {
level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN);
if (level != old_level)
++edges;
old_level = level;
}
next_bit_at += TAG_BIT_PERIOD;
// We expect 42 edges (ONE)
if ( edges > 20 )
data ^= the_bit;
the_bit <<= 1;
}
// output
f->data = data;
f->bits = bits;
// log
uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1)};
LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, false);
}
// Setup pm3 as a Legic Reader
static uint32_t setup_phase_reader(uint8_t iv) {
// Switch on carrier and let the tag charge for 5ms
HIGH(GPIO_SSC_DOUT);
WaitUS(5000);
ResetTicks();
legic_prng_init(0);
// send IV handshake
frame_sendAsReader(iv, 7);
// tag and reader has same IV.
legic_prng_init(iv);
frame_receiveAsReader(&current_frame, 6);
// 292us (438t) - fixed delay before sending ack.
// minus log and stuff 100tick?
WaitTicks(338);
legic_prng_forward(3);
// Send obsfuscated acknowledgment frame.
// 0x19 = 0x18 MIM22, 0x01 LSB READCMD
// 0x39 = 0x38 MIM256, MIM1024 0x01 LSB READCMD
switch ( current_frame.data ) {
case 0x0D: frame_sendAsReader(0x19, 6); break;
case 0x1D:
case 0x3D: frame_sendAsReader(0x39, 6); break;
default: break;
}
legic_prng_forward(2);
return current_frame.data;
}
void LegicCommonInit(bool clear_mem) {
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX);
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
/* Bitbang the transmitter */
SHORT_COIL;
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN;
// reserve a cardmem, meaning we can use the tracelog function in bigbuff easier.
cardmem = BigBuf_get_EM_addr();
if ( clear_mem )
memset(cardmem, 0x00, LEGIC_CARD_MEMSIZE);
clear_trace();
set_tracing(true);
crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0);
StartTicks();
}
// Switch off carrier, make sure tag is reset
static void switch_off_tag_rwd(void) {
SHORT_COIL;
WaitUS(20);
WDT_HIT();
}
// calculate crc4 for a legic READ command
static uint32_t legic4Crc(uint8_t cmd, uint16_t byte_index, uint8_t value, uint8_t cmd_sz) {
crc_clear(&legic_crc);
uint32_t temp = (value << cmd_sz) | (byte_index << 1) | cmd;
crc_update(&legic_crc, temp, cmd_sz + 8 );
return crc_finish(&legic_crc);
}
int legic_read_byte( uint16_t index, uint8_t cmd_sz) {
uint8_t byte, crc, calcCrc = 0;
uint32_t cmd = (index << 1) | LEGIC_READ;
// 90ticks = 60us (should be 100us but crc calc takes time.)
//WaitTicks(330); // 330ticks prng(4) - works
WaitTicks(240); // 240ticks prng(3) - works
frame_sendAsReader(cmd, cmd_sz);
frame_receiveAsReader(&current_frame, 12);
// CRC check.
byte = BYTEx(current_frame.data, 0);
crc = BYTEx(current_frame.data, 1);
calcCrc = legic4Crc(LEGIC_READ, index, byte, cmd_sz);
if( calcCrc != crc ) {
Dbprintf("!!! crc mismatch: %x != %x !!!", calcCrc, crc);
return -1;
}
legic_prng_forward(3);
return byte;
}
/*
* - assemble a write_cmd_frame with crc and send it
* - wait until the tag sends back an ACK ('1' bit unencrypted)
* - forward the prng based on the timing
*/
bool legic_write_byte(uint16_t index, uint8_t byte, uint8_t addr_sz) {
bool isOK = false;
int8_t i = 40;
uint8_t edges = 0;
uint8_t cmd_sz = addr_sz+1+8+4; //crc+data+cmd;
uint32_t steps = 0, next_bit_at, start, crc, old_level = 0;
crc = legic4Crc(LEGIC_WRITE, index, byte, addr_sz+1);
// send write command
uint32_t cmd = LEGIC_WRITE;
cmd |= index << 1; // index
cmd |= byte << (addr_sz+1); // Data
cmd |= (crc & 0xF ) << (addr_sz+1+8); // CRC
WaitTicks(240);
frame_sendAsReader(cmd, cmd_sz);
LINE_IN;
start = GET_TICKS;
// ACK, - one single "1" bit after 3.6ms
// 3.6ms = 3600us * 1.5 = 5400ticks.
WaitTicks(5400);
next_bit_at = GET_TICKS + TAG_BIT_PERIOD;
while ( i-- ) {
WDT_HIT();
edges = 0;
while ( GET_TICKS < next_bit_at) {
volatile uint32_t level = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN);
if (level != old_level)
++edges;
old_level = level;
}
next_bit_at += TAG_BIT_PERIOD;
// We expect 42 edges (ONE)
if(edges > 20 ) {
steps = ( (GET_TICKS - start) / TAG_BIT_PERIOD);
legic_prng_forward(steps);
isOK = true;
goto OUT;
}
}
OUT: ;
legic_prng_forward(1);
uint8_t cmdbytes[] = {1, isOK, BYTEx(steps, 0), BYTEx(steps, 1) };
LogTrace(cmdbytes, sizeof(cmdbytes), start, GET_TICKS, NULL, false);
return isOK;
}
int LegicRfReader(uint16_t offset, uint16_t len, uint8_t iv) {
uint16_t i = 0;
uint8_t isOK = 1;
legic_card_select_t card;
LegicCommonInit(true);
if ( legic_select_card_iv(&card, iv) ) {
isOK = 0;
goto OUT;
}
if (len + offset > card.cardsize)
len = card.cardsize - offset;
LED_B_ON();
while (i < len) {
int r = legic_read_byte(offset + i, card.cmdsize);
if (r == -1 || BUTTON_PRESS()) {
if ( MF_DBGLEVEL >= 2) DbpString("operation aborted");
isOK = 0;
goto OUT;
}
cardmem[i++] = r;
WDT_HIT();
}
OUT:
WDT_HIT();
switch_off_tag_rwd();
LEDsoff();
cmd_send(CMD_ACK, isOK, len, 0, cardmem, len);
return 0;
}
void LegicRfWriter(uint16_t offset, uint16_t len, uint8_t iv, uint8_t *data) {
#define LOWERLIMIT 4
uint8_t isOK = 1, msg = 0;
legic_card_select_t card;
// uid NOT is writeable.
if ( offset <= LOWERLIMIT ) {
isOK = 0;
goto OUT;
}
LegicCommonInit(false);
if ( legic_select_card_iv(&card, iv) ) {
isOK = 0;
msg = 1;
goto OUT;
}
if ( len + offset > card.cardsize)
len = card.cardsize - offset;
LED_B_ON();
while( len > 0 ) {
--len;
if ( !legic_write_byte( len + offset, data[len], card.addrsize) ) {
Dbprintf("operation failed | %02X | %02X | %02X", len + offset, len, data[len] );
isOK = 0;
goto OUT;
}
WDT_HIT();
}
OUT:
cmd_send(CMD_ACK, isOK, msg,0,0,0);
switch_off_tag_rwd();
LEDsoff();
}
int legic_select_card_iv(legic_card_select_t *p_card, uint8_t iv){
if ( p_card == NULL ) return 1;
p_card->tagtype = setup_phase_reader(iv);
switch(p_card->tagtype) {
case 0x0d:
p_card->cmdsize = 6;
p_card->addrsize = 5;
p_card->cardsize = 22;
break;
case 0x1d:
p_card->cmdsize = 9;
p_card->addrsize = 8;
p_card->cardsize = 256;
break;
case 0x3d:
p_card->cmdsize = 11;
p_card->addrsize = 10;
p_card->cardsize = 1024;
break;
default:
p_card->cmdsize = 0;
p_card->addrsize = 0;
p_card->cardsize = 0;
return 2;
}
return 0;
}
int legic_select_card(legic_card_select_t *p_card){
return legic_select_card_iv(p_card, 0x01);
}
//-----------------------------------------------------------------------------
// Work with emulator memory
//
// Note: we call FpgaDownloadAndGo(FPGA_BITSTREAM_HF) here although FPGA is not
// involved in dealing with emulator memory. But if it is called later, it might
// destroy the Emulator Memory.
//-----------------------------------------------------------------------------
// arg0 = offset
// arg1 = num of bytes
void LegicEMemSet(uint32_t arg0, uint32_t arg1, uint8_t *data) {
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
legic_emlset_mem(data, arg0, arg1);
}
// arg0 = offset
// arg1 = num of bytes
void LegicEMemGet(uint32_t arg0, uint32_t arg1) {
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
uint8_t buf[USB_CMD_DATA_SIZE] = {0x00};
legic_emlget_mem(buf, arg0, arg1);
LED_B_ON();
cmd_send(CMD_ACK, arg0, arg1, 0, buf, USB_CMD_DATA_SIZE);
LED_B_OFF();
}
void legic_emlset_mem(uint8_t *data, int offset, int numofbytes) {
cardmem = BigBuf_get_EM_addr();
memcpy(cardmem + offset, data, numofbytes);
}
void legic_emlget_mem(uint8_t *data, int offset, int numofbytes) {
cardmem = BigBuf_get_EM_addr();
memcpy(data, cardmem + offset, numofbytes);
}
void LegicRfInfo(void){
int r;
uint8_t buf[sizeof(legic_card_select_t)] = {0x00};
legic_card_select_t *card = (legic_card_select_t*) buf;
LegicCommonInit(false);
if ( legic_select_card(card) ) {
cmd_send(CMD_ACK,0,0,0,0,0);
goto OUT;
}
// read UID bytes
for ( uint8_t i = 0; i < sizeof(card->uid); ++i) {
r = legic_read_byte(i, card->cmdsize);
if ( r == -1 ) {
cmd_send(CMD_ACK,0,0,0,0,0);
goto OUT;
}
card->uid[i] = r & 0xFF;
}
// MCC byte.
r = legic_read_byte(4, card->cmdsize);
uint32_t calc_mcc = CRC8Legic(card->uid, 4);;
if ( r != calc_mcc) {
cmd_send(CMD_ACK,0,0,0,0,0);
goto OUT;
}
// OK
cmd_send(CMD_ACK, 1, 0, 0, buf, sizeof(legic_card_select_t));
OUT:
switch_off_tag_rwd();
LEDsoff();
}
/* Handle (whether to respond) a frame in tag mode
* Only called when simulating a tag.
*/
static void frame_handle_tag(struct legic_frame const * const f)
{
// log
//uint8_t cmdbytes[] = {bits, BYTEx(data, 0), BYTEx(data, 1)};
//LogTrace(cmdbytes, sizeof(cmdbytes), starttime, GET_TICKS, NULL, false);
//Dbprintf("ICE: enter frame_handle_tag: %02x ", f->bits);
/* First Part of Handshake (IV) */
if(f->bits == 7) {
LED_C_ON();
// Reset prng timer
//ResetTimer(prng_timer);
ResetTicks();
// IV from reader.
legic_prng_init(f->data);
Dbprintf("ICE: IV: %02x ", f->data);
// We should have three tagtypes with three different answers.
legic_prng_forward(2);
//frame_send_tag(0x3d, 6); /* MIM1024 0x3d^0x26 = 0x1B */
frame_send_tag(0x1d, 6); // MIM256
legic_state = STATE_IV;
legic_read_count = 0;
legic_prng_bc = 0;
legic_prng_iv = f->data;
//ResetTimer(timer);
//WaitUS(280);
WaitTicks(388);
return;
}
/* 0x19==??? */
if(legic_state == STATE_IV) {
uint32_t local_key = get_key_stream(3, 6);
int xored = 0x39 ^ local_key;
if((f->bits == 6) && (f->data == xored)) {
legic_state = STATE_CON;
ResetTimer(timer);
WaitTicks(300);
return;
} else {
legic_state = STATE_DISCON;
LED_C_OFF();
Dbprintf("iv: %02x frame: %02x key: %02x xored: %02x", legic_prng_iv, f->data, local_key, xored);
return;
}
}
/* Read */
if(f->bits == 11) {
if(legic_state == STATE_CON) {
uint32_t key = get_key_stream(2, 11); //legic_phase_drift, 11);
uint16_t addr = f->data ^ key;
addr >>= 1;
uint8_t data = cardmem[addr];
uint32_t crc = legic4Crc(LEGIC_READ, addr, data, 11) << 8;
//legic_read_count++;
//legic_prng_forward(legic_reqresp_drift);
frame_send_tag(crc | data, 12);
//ResetTimer(timer);
legic_prng_forward(2);
WaitTicks(330);
return;
}
}
/* Write */
if (f->bits == 23 || f->bits == 21 ) {
uint32_t key = get_key_stream(-1, 23); //legic_frame_drift, 23);
uint16_t addr = f->data ^ key;
addr >>= 1;
addr &= 0x3ff;
uint32_t data = f->data ^ key;
data >>= 11;
data &= 0xff;
cardmem[addr] = data;
/* write command */
legic_state = STATE_DISCON;
LED_C_OFF();
Dbprintf("write - addr: %x, data: %x", addr, data);
// should send a ACK after 3.6ms
return;
}
if(legic_state != STATE_DISCON) {
Dbprintf("Unexpected: sz:%u, Data:%03.3x, State:%u, Count:%u", f->bits, f->data, legic_state, legic_read_count);
Dbprintf("IV: %03.3x", legic_prng_iv);
}
legic_state = STATE_DISCON;
legic_read_count = 0;
WaitMS(10);
LED_C_OFF();
return;
}
/* Read bit by bit untill full frame is received
* Call to process frame end answer
*/
static void emit(int bit) {
switch (bit) {
case 1:
frame_append_bit(&current_frame, 1);
break;
case 0:
frame_append_bit(&current_frame, 0);
break;
default:
if(current_frame.bits <= 4) {
frame_clean(&current_frame);
} else {
frame_handle_tag(&current_frame);
frame_clean(&current_frame);
}
WDT_HIT();
break;
}
}
void LegicRfSimulate(int phase, int frame, int reqresp)
{
/* ADC path high-frequency peak detector, FPGA in high-frequency simulator mode,
* modulation mode set to 212kHz subcarrier. We are getting the incoming raw
* envelope waveform on DIN and should send our response on DOUT.
*
* The LEGIC RF protocol is pulse-pause-encoding from reader to card, so we'll
* measure the time between two rising edges on DIN, and no encoding on the
* subcarrier from card to reader, so we'll just shift out our verbatim data
* on DOUT, 1 bit is 100us. The time from reader to card frame is still unclear,
* seems to be 330us.
*/
int old_level = 0, active = 0;
volatile int32_t level = 0;
legic_state = STATE_DISCON;
legic_phase_drift = phase;
legic_frame_drift = frame;
legic_reqresp_drift = reqresp;
/* to get the stream of bits from FPGA in sim mode.*/
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
// Set up the synchronous serial port
//FpgaSetupSsc();
// connect Demodulated Signal to ADC:
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_212K);
//FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_NO_MODULATION);
#define LEGIC_DMA_BUFFER 256
// The DMA buffer, used to stream samples from the FPGA
//uint8_t *dmaBuf = BigBuf_malloc(LEGIC_DMA_BUFFER);
//uint8_t *data = dmaBuf;
// Setup and start DMA.
// if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, LEGIC_DMA_BUFFER) ){
// if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting");
// return;
// }
//StartCountSspClk();
/* Bitbang the receiver */
AT91C_BASE_PIOA->PIO_ODR = GPIO_SSC_DIN;
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DIN;
// need a way to determine which tagtype we are simulating
// hook up emulator memory
cardmem = BigBuf_get_EM_addr();
clear_trace();
set_tracing(true);
crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0);
StartTicks();
LED_B_ON();
DbpString("Starting Legic emulator, press button to end");
/*
* The mode FPGA_HF_SIMULATOR_MODULATE_212K works like this.
* - A 1-bit input to the FPGA becomes 8 pulses on 212kHz (fc/64) (18.88us).
* - A 0-bit input to the FPGA becomes an unmodulated time of 18.88us
*
* In this mode the SOF can be written as 00011101 = 0x1D
* The EOF can be written as 10111000 = 0xb8
* A logic 1 is 01
* A logic 0 is 10
volatile uint8_t b;
uint8_t i = 0;
while( !BUTTON_PRESS() ) {
WDT_HIT();
// not sending anything.
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0x00;
}
// receive
if ( AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY ) {
b = (uint8_t) AT91C_BASE_SSC->SSC_RHR;
bd[i] = b;
++i;
// if(OutOfNDecoding(b & 0x0f))
// *len = Uart.byteCnt;
}
}
*/
while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
level = !!(AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_DIN);
uint32_t time = GET_TICKS;
if (level != old_level) {
if (level == 1) {
//Dbprintf("start, %u ", time);
StartTicks();
// did we get a signal
if (FUZZ_EQUAL(time, RWD_TIME_1, RWD_TIME_FUZZ)) {
// 1 bit
emit(1);
active = 1;
LED_A_ON();
} else if (FUZZ_EQUAL(time, RWD_TIME_0, RWD_TIME_FUZZ)) {
// 0 bit
emit(0);
active = 1;
LED_A_ON();
} else if (active) {
// invalid
emit(-1);
active = 0;
LED_A_OFF();
}
}
}
/* Frame end */
if(time >= (RWD_TIME_1 + RWD_TIME_FUZZ) && active) {
emit(-1);
active = 0;
LED_A_OFF();
}
/*
* Disable the counter, Then wait for the clock to acknowledge the
* shutdown in its status register. Reading the SR has the
* side-effect of clearing any pending state in there.
*/
//if(time >= (20*RWD_TIME_1) && (timer->TC_SR & AT91C_TC_CLKSTA))
if(time >= (20 * RWD_TIME_1) )
StopTicks();
old_level = level;
WDT_HIT();
}
WDT_HIT();
DbpString("LEGIC Prime emulator stopped");
switch_off_tag_rwd();
FpgaDisableSscDma();
LEDsoff();
cmd_send(CMD_ACK, 1, 0, 0, 0, 0);
}
//-----------------------------------------------------------------------------
// Code up a string of octets at layer 2 (including CRC, we don't generate
// that here) so that they can be transmitted to the reader. Doesn't transmit
// them yet, just leaves them ready to send in ToSend[].
//-----------------------------------------------------------------------------
// static void CodeLegicAsTag(const uint8_t *cmd, int len)
// {
// int i;
// ToSendReset();
// // Transmit a burst of ones, as the initial thing that lets the
// // reader get phase sync. This (TR1) must be > 80/fs, per spec,
// // but tag that I've tried (a Paypass) exceeds that by a fair bit,
// // so I will too.
// for(i = 0; i < 20; i++) {
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// }
// // Send SOF.
// for(i = 0; i < 10; i++) {
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// }
// for(i = 0; i < 2; i++) {
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// }
// for(i = 0; i < len; i++) {
// int j;
// uint8_t b = cmd[i];
// // Start bit
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// // Data bits
// for(j = 0; j < 8; j++) {
// if(b & 1) {
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// } else {
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// }
// b >>= 1;
// }
// // Stop bit
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// }
// // Send EOF.
// for(i = 0; i < 10; i++) {
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// ToSendStuffBit(0);
// }
// for(i = 0; i < 2; i++) {
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// ToSendStuffBit(1);
// }
// // Convert from last byte pos to length
// ToSendMax++;
// }
//-----------------------------------------------------------------------------
// The software UART that receives commands from the reader, and its state
// variables.
//-----------------------------------------------------------------------------
/*
static struct {
enum {
STATE_UNSYNCD,
STATE_GOT_FALLING_EDGE_OF_SOF,
STATE_AWAITING_START_BIT,
STATE_RECEIVING_DATA
} state;
uint16_t shiftReg;
int bitCnt;
int byteCnt;
int byteCntMax;
int posCnt;
uint8_t *output;
} Uart;
*/
/* Receive & handle a bit coming from the reader.
*
* This function is called 4 times per bit (every 2 subcarrier cycles).
* Subcarrier frequency fs is 212kHz, 1/fs = 4,72us, i.e. function is called every 9,44us
*
* LED handling:
* LED A -> ON once we have received the SOF and are expecting the rest.
* LED A -> OFF once we have received EOF or are in error state or unsynced
*
* Returns: true if we received a EOF
* false if we are still waiting for some more
*/
// static RAMFUNC int HandleLegicUartBit(uint8_t bit)
// {
// switch(Uart.state) {
// case STATE_UNSYNCD:
// if(!bit) {
// // we went low, so this could be the beginning of an SOF
// Uart.state = STATE_GOT_FALLING_EDGE_OF_SOF;
// Uart.posCnt = 0;
// Uart.bitCnt = 0;
// }
// break;
// case STATE_GOT_FALLING_EDGE_OF_SOF:
// Uart.posCnt++;
// if(Uart.posCnt == 2) { // sample every 4 1/fs in the middle of a bit
// if(bit) {
// if(Uart.bitCnt > 9) {
// // we've seen enough consecutive
// // zeros that it's a valid SOF
// Uart.posCnt = 0;
// Uart.byteCnt = 0;
// Uart.state = STATE_AWAITING_START_BIT;
// LED_A_ON(); // Indicate we got a valid SOF
// } else {
// // didn't stay down long enough
// // before going high, error
// Uart.state = STATE_UNSYNCD;
// }
// } else {
// // do nothing, keep waiting
// }
// Uart.bitCnt++;
// }
// if(Uart.posCnt >= 4) Uart.posCnt = 0;
// if(Uart.bitCnt > 12) {
// // Give up if we see too many zeros without
// // a one, too.
// LED_A_OFF();
// Uart.state = STATE_UNSYNCD;
// }
// break;
// case STATE_AWAITING_START_BIT:
// Uart.posCnt++;
// if(bit) {
// if(Uart.posCnt > 50/2) { // max 57us between characters = 49 1/fs, max 3 etus after low phase of SOF = 24 1/fs
// // stayed high for too long between
// // characters, error
// Uart.state = STATE_UNSYNCD;
// }
// } else {
// // falling edge, this starts the data byte
// Uart.posCnt = 0;
// Uart.bitCnt = 0;
// Uart.shiftReg = 0;
// Uart.state = STATE_RECEIVING_DATA;
// }
// break;
// case STATE_RECEIVING_DATA:
// Uart.posCnt++;
// if(Uart.posCnt == 2) {
// // time to sample a bit
// Uart.shiftReg >>= 1;
// if(bit) {
// Uart.shiftReg |= 0x200;
// }
// Uart.bitCnt++;
// }
// if(Uart.posCnt >= 4) {
// Uart.posCnt = 0;
// }
// if(Uart.bitCnt == 10) {
// if((Uart.shiftReg & 0x200) && !(Uart.shiftReg & 0x001))
// {
// // this is a data byte, with correct
// // start and stop bits
// Uart.output[Uart.byteCnt] = (Uart.shiftReg >> 1) & 0xff;
// Uart.byteCnt++;
// if(Uart.byteCnt >= Uart.byteCntMax) {
// // Buffer overflowed, give up
// LED_A_OFF();
// Uart.state = STATE_UNSYNCD;
// } else {
// // so get the next byte now
// Uart.posCnt = 0;
// Uart.state = STATE_AWAITING_START_BIT;
// }
// } else if (Uart.shiftReg == 0x000) {
// // this is an EOF byte
// LED_A_OFF(); // Finished receiving
// Uart.state = STATE_UNSYNCD;
// if (Uart.byteCnt != 0) {
// return TRUE;
// }
// } else {
// // this is an error
// LED_A_OFF();
// Uart.state = STATE_UNSYNCD;
// }
// }
// break;
// default:
// LED_A_OFF();
// Uart.state = STATE_UNSYNCD;
// break;
// }
// return false;
// }
/*
static void UartReset() {
Uart.byteCntMax = 3;
Uart.state = STATE_UNSYNCD;
Uart.byteCnt = 0;
Uart.bitCnt = 0;
Uart.posCnt = 0;
memset(Uart.output, 0x00, 3);
}
*/
// static void UartInit(uint8_t *data) {
// Uart.output = data;
// UartReset();
// }
//=============================================================================
// An LEGIC reader. We take layer two commands, code them
// appropriately, and then send them to the tag. We then listen for the
// tag's response, which we leave in the buffer to be demodulated on the
// PC side.
//=============================================================================
/*
static struct {
enum {
DEMOD_UNSYNCD,
DEMOD_PHASE_REF_TRAINING,
DEMOD_AWAITING_FALLING_EDGE_OF_SOF,
DEMOD_GOT_FALLING_EDGE_OF_SOF,
DEMOD_AWAITING_START_BIT,
DEMOD_RECEIVING_DATA
} state;
int bitCount;
int posCount;
int thisBit;
uint16_t shiftReg;
uint8_t *output;
int len;
int sumI;
int sumQ;
} Demod;
*/
/*
* Handles reception of a bit from the tag
*
* This function is called 2 times per bit (every 4 subcarrier cycles).
* Subcarrier frequency fs is 212kHz, 1/fs = 4,72us, i.e. function is called every 9,44us
*
* LED handling:
* LED C -> ON once we have received the SOF and are expecting the rest.
* LED C -> OFF once we have received EOF or are unsynced
*
* Returns: true if we received a EOF
* false if we are still waiting for some more
*
*/
/*
static RAMFUNC int HandleLegicSamplesDemod(int ci, int cq)
{
int v = 0;
int ai = ABS(ci);
int aq = ABS(cq);
int halfci = (ai >> 1);
int halfcq = (aq >> 1);
switch(Demod.state) {
case DEMOD_UNSYNCD:
CHECK_FOR_SUBCARRIER()
if(v > SUBCARRIER_DETECT_THRESHOLD) { // subcarrier detected
Demod.state = DEMOD_PHASE_REF_TRAINING;
Demod.sumI = ci;
Demod.sumQ = cq;
Demod.posCount = 1;
}
break;
case DEMOD_PHASE_REF_TRAINING:
if(Demod.posCount < 8) {
CHECK_FOR_SUBCARRIER()
if (v > SUBCARRIER_DETECT_THRESHOLD) {
// set the reference phase (will code a logic '1') by averaging over 32 1/fs.
// note: synchronization time > 80 1/fs
Demod.sumI += ci;
Demod.sumQ += cq;
++Demod.posCount;
} else {
// subcarrier lost
Demod.state = DEMOD_UNSYNCD;
}
} else {
Demod.state = DEMOD_AWAITING_FALLING_EDGE_OF_SOF;
}
break;
case DEMOD_AWAITING_FALLING_EDGE_OF_SOF:
MAKE_SOFT_DECISION()
//Dbprintf("ICE: %d %d %d %d %d", v, Demod.sumI, Demod.sumQ, ci, cq );
// logic '0' detected
if (v <= 0) {
Demod.state = DEMOD_GOT_FALLING_EDGE_OF_SOF;
// start of SOF sequence
Demod.posCount = 0;
} else {
// maximum length of TR1 = 200 1/fs
if(Demod.posCount > 25*2) Demod.state = DEMOD_UNSYNCD;
}
++Demod.posCount;
break;
case DEMOD_GOT_FALLING_EDGE_OF_SOF:
++Demod.posCount;
MAKE_SOFT_DECISION()
if(v > 0) {
// low phase of SOF too short (< 9 etu). Note: spec is >= 10, but FPGA tends to "smear" edges
if(Demod.posCount < 10*2) {
Demod.state = DEMOD_UNSYNCD;
} else {
LED_C_ON(); // Got SOF
Demod.state = DEMOD_AWAITING_START_BIT;
Demod.posCount = 0;
Demod.len = 0;
}
} else {
// low phase of SOF too long (> 12 etu)
if(Demod.posCount > 13*2) {
Demod.state = DEMOD_UNSYNCD;
LED_C_OFF();
}
}
break;
case DEMOD_AWAITING_START_BIT:
++Demod.posCount;
MAKE_SOFT_DECISION()
if(v > 0) {
// max 19us between characters = 16 1/fs, max 3 etu after low phase of SOF = 24 1/fs
if(Demod.posCount > 3*2) {
Demod.state = DEMOD_UNSYNCD;
LED_C_OFF();
}
} else {
// start bit detected
Demod.bitCount = 0;
Demod.posCount = 1; // this was the first half
Demod.thisBit = v;
Demod.shiftReg = 0;
Demod.state = DEMOD_RECEIVING_DATA;
}
break;
case DEMOD_RECEIVING_DATA:
MAKE_SOFT_DECISION()
if(Demod.posCount == 0) {
// first half of bit
Demod.thisBit = v;
Demod.posCount = 1;
} else {
// second half of bit
Demod.thisBit += v;
Demod.shiftReg >>= 1;
// logic '1'
if(Demod.thisBit > 0)
Demod.shiftReg |= 0x200;
++Demod.bitCount;
if(Demod.bitCount == 10) {
uint16_t s = Demod.shiftReg;
if((s & 0x200) && !(s & 0x001)) {
// stop bit == '1', start bit == '0'
uint8_t b = (s >> 1);
Demod.output[Demod.len] = b;
++Demod.len;
Demod.state = DEMOD_AWAITING_START_BIT;
} else {
Demod.state = DEMOD_UNSYNCD;
LED_C_OFF();
if(s == 0x000) {
// This is EOF (start, stop and all data bits == '0'
return true;
}
}
}
Demod.posCount = 0;
}
break;
default:
Demod.state = DEMOD_UNSYNCD;
LED_C_OFF();
break;
}
return false;
}
*/
/*
// Clear out the state of the "UART" that receives from the tag.
static void DemodReset() {
Demod.len = 0;
Demod.state = DEMOD_UNSYNCD;
Demod.posCount = 0;
Demod.sumI = 0;
Demod.sumQ = 0;
Demod.bitCount = 0;
Demod.thisBit = 0;
Demod.shiftReg = 0;
memset(Demod.output, 0x00, 3);
}
static void DemodInit(uint8_t *data) {
Demod.output = data;
DemodReset();
}
*/
/*
* Demodulate the samples we received from the tag, also log to tracebuffer
* quiet: set to 'TRUE' to disable debug output
*/
/*
#define LEGIC_DMA_BUFFER_SIZE 256
static void GetSamplesForLegicDemod(int n, bool quiet)
{
int max = 0;
bool gotFrame = false;
int lastRxCounter = LEGIC_DMA_BUFFER_SIZE;
int ci, cq, samples = 0;
BigBuf_free();
// And put the FPGA in the appropriate mode
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_RX_XCORR | FPGA_HF_READER_RX_XCORR_QUARTER_FREQ);
// The response (tag -> reader) that we're receiving.
// Set up the demodulator for tag -> reader responses.
DemodInit(BigBuf_malloc(MAX_FRAME_SIZE));
// The DMA buffer, used to stream samples from the FPGA
int8_t *dmaBuf = (int8_t*) BigBuf_malloc(LEGIC_DMA_BUFFER_SIZE);
int8_t *upTo = dmaBuf;
// Setup and start DMA.
if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, LEGIC_DMA_BUFFER_SIZE) ){
if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting");
return;
}
// Signal field is ON with the appropriate LED:
LED_D_ON();
for(;;) {
int behindBy = lastRxCounter - AT91C_BASE_PDC_SSC->PDC_RCR;
if(behindBy > max) max = behindBy;
while(((lastRxCounter-AT91C_BASE_PDC_SSC->PDC_RCR) & (LEGIC_DMA_BUFFER_SIZE-1)) > 2) {
ci = upTo[0];
cq = upTo[1];
upTo += 2;
if(upTo >= dmaBuf + LEGIC_DMA_BUFFER_SIZE) {
upTo = dmaBuf;
AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) upTo;
AT91C_BASE_PDC_SSC->PDC_RNCR = LEGIC_DMA_BUFFER_SIZE;
}
lastRxCounter -= 2;
if(lastRxCounter <= 0)
lastRxCounter = LEGIC_DMA_BUFFER_SIZE;
samples += 2;
gotFrame = HandleLegicSamplesDemod(ci , cq );
if ( gotFrame )
break;
}
if(samples > n || gotFrame)
break;
}
FpgaDisableSscDma();
if (!quiet && Demod.len == 0) {
Dbprintf("max behindby = %d, samples = %d, gotFrame = %d, Demod.len = %d, Demod.sumI = %d, Demod.sumQ = %d",
max,
samples,
gotFrame,
Demod.len,
Demod.sumI,
Demod.sumQ
);
}
//Tracing
if (Demod.len > 0) {
uint8_t parity[MAX_PARITY_SIZE] = {0x00};
LogTrace(Demod.output, Demod.len, 0, 0, parity, false);
}
}
*/
//-----------------------------------------------------------------------------
// Transmit the command (to the tag) that was placed in ToSend[].
//-----------------------------------------------------------------------------
/*
static void TransmitForLegic(void)
{
int c;
FpgaSetupSsc();
while(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY))
AT91C_BASE_SSC->SSC_THR = 0xff;
// Signal field is ON with the appropriate Red LED
LED_D_ON();
// Signal we are transmitting with the Green LED
LED_B_ON();
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD);
for(c = 0; c < 10;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = 0xff;
c++;
}
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
(void)r;
}
WDT_HIT();
}
c = 0;
for(;;) {
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
AT91C_BASE_SSC->SSC_THR = ToSend[c];
legic_prng_forward(1); // forward the lfsr
c++;
if(c >= ToSendMax) {
break;
}
}
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
volatile uint32_t r = AT91C_BASE_SSC->SSC_RHR;
(void)r;
}
WDT_HIT();
}
LED_B_OFF();
}
*/
//-----------------------------------------------------------------------------
// Code a layer 2 command (string of octets, including CRC) into ToSend[],
// so that it is ready to transmit to the tag using TransmitForLegic().
//-----------------------------------------------------------------------------
/*
static void CodeLegicBitsAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits)
{
int i, j;
uint8_t b;
ToSendReset();
// Send SOF
for(i = 0; i < 7; i++)
ToSendStuffBit(1);
for(i = 0; i < cmdlen; i++) {
// Start bit
ToSendStuffBit(0);
// Data bits
b = cmd[i];
for(j = 0; j < bits; j++) {
if(b & 1) {
ToSendStuffBit(1);
} else {
ToSendStuffBit(0);
}
b >>= 1;
}
}
// Convert from last character reference to length
++ToSendMax;
}
*/
/**
Convenience function to encode, transmit and trace Legic comms
**/
/*
static void CodeAndTransmitLegicAsReader(const uint8_t *cmd, uint8_t cmdlen, int bits)
{
CodeLegicBitsAsReader(cmd, cmdlen, bits);
TransmitForLegic();
if (tracing) {
uint8_t parity[1] = {0x00};
LogTrace(cmd, cmdlen, 0, 0, parity, true);
}
}
*/
// Set up LEGIC communication
/*
void ice_legic_setup() {
// standard things.
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
BigBuf_free(); BigBuf_Clear_ext(false);
clear_trace();
set_tracing(true);
DemodReset();
UartReset();
// Set up the synchronous serial port
FpgaSetupSsc();
// connect Demodulated Signal to ADC:
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
// Signal field is on with the appropriate LED
LED_D_ON();
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_READER_TX | FPGA_HF_READER_TX_SHALLOW_MOD);
SpinDelay(20);
// Start the timer
//StartCountSspClk();
// initalize CRC
crc_init(&legic_crc, 4, 0x19 >> 1, 0x5, 0);
// initalize prng
legic_prng_init(0);
}
*/
Reference in a new issue View git blame Copy permalink