mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-10 09:32:41 +08:00
156 lines
7.3 KiB
Verilog
156 lines
7.3 KiB
Verilog
//-----------------------------------------------------------------------------
|
|
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
|
|
//
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
//
|
|
// See LICENSE.txt for the text of the license.
|
|
//-----------------------------------------------------------------------------
|
|
//
|
|
// The FPGA is responsible for interfacing between the A/D, the coil drivers,
|
|
// and the ARM. In the low-frequency modes it passes the data straight
|
|
// through, so that the ARM gets raw A/D samples over the SSP. In the high-
|
|
// frequency modes, the FPGA might perform some demodulation first, to
|
|
// reduce the amount of data that we must send to the ARM.
|
|
//-----------------------------------------------------------------------------
|
|
|
|
/*
|
|
Communication between ARM / FPGA is done inside armsrc/fpgaloader.c see: function FpgaSendCommand()
|
|
Send 16 bit command / data pair to FPGA with the bit format:
|
|
|
|
+------ frame layout circa 2020 ------------------+
|
|
| 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 |
|
|
+-------------------------------------------------+
|
|
| C C C C M M M M P P P P P P P P | C = FPGA_CMD_SET_CONFREG, M = FPGA_MAJOR_MODE_*, P = FPGA_LF_* or FPGA_HF_* parameter
|
|
| C C C C D D D D D D D D | C = FPGA_CMD_SET_DIVISOR, D = divisor
|
|
| C C C C T T T T T T T T | C = FPGA_CMD_SET_EDGE_DETECT_THRESHOLD, T = threshold
|
|
| C C C C E | C = FPGA_CMD_TRACE_ENABLE, E=0 off, E=1 on
|
|
+-------------------------------------------------+
|
|
|
|
+------ frame layout current ---------------------+
|
|
| 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 |
|
|
+-------------------------------------------------+
|
|
| C C C C M M M P P P P P P | C = FPGA_CMD_SET_CONFREG, M = FPGA_MAJOR_MODE_*, P = FPGA_LF_* or FPGA_HF_* parameter
|
|
| C C C C D D D D D D D D | C = FPGA_CMD_SET_DIVISOR, D = divisor
|
|
| C C C C T T T T T T T T | C = FPGA_CMD_SET_EDGE_DETECT_THRESHOLD, T = threshold
|
|
| C C C C E | C = FPGA_CMD_TRACE_ENABLE, E=0 off, E=1 on
|
|
+-------------------------------------------------+
|
|
|
|
shift_reg receive this 16bit frame
|
|
|
|
LF command
|
|
----------
|
|
shift_reg[15:12] == 4bit command
|
|
LF has three commands (FPGA_CMD_SET_CONFREG, FPGA_CMD_SET_DIVISOR, FPGA_CMD_SET_EDGE_DETECT_THRESHOLD)
|
|
Current commands uses only 2bits. We have room for up to 4bits of commands total (7).
|
|
|
|
LF data
|
|
-------
|
|
shift_reg[11:0] == 12bit data
|
|
lf data is divided into MAJOR MODES and configuration values.
|
|
|
|
The major modes uses 3bits (0,1,2,3,7 | 000, 001, 010, 011, 111)
|
|
000 FPGA_MAJOR_MODE_LF_READER = Act as LF reader (modulate)
|
|
001 FPGA_MAJOR_MODE_LF_EDGE_DETECT = Simulate LF
|
|
010 FPGA_MAJOR_MODE_LF_PASSTHRU = Passthrough mode, CROSS_LO line connected to SSP_DIN. SSP_DOUT logic level controls if we modulate / listening
|
|
011 FPGA_MAJOR_MODE_LF_ADC = refactor hitag2, clear ADC sampling
|
|
111 FPGA_MAJOR_MODE_OFF = turn off sampling.
|
|
|
|
Each one of this major modes can have options. Currently these two major modes uses options.
|
|
- FPGA_MAJOR_MODE_LF_READER
|
|
- FPGA_MAJOR_MODE_LF_EDGE_DETECT
|
|
|
|
FPGA_MAJOR_MODE_LF_READER
|
|
-------------------------------------
|
|
lf_field = 1bit (FPGA_LF_ADC_READER_FIELD)
|
|
|
|
You can send FPGA_CMD_SET_DIVISOR to set with FREQUENCY the fpga should sample at
|
|
divisor = 8bits shift_reg[7:0]
|
|
|
|
FPGA_MAJOR_MODE_LF_EDGE_DETECT
|
|
------------------------------------------
|
|
lf_ed_toggle_mode = 1bits
|
|
lf_ed_threshold = 8bits threshold defaults to 127
|
|
|
|
You can send FPGA_CMD_SET_EDGE_DETECT_THRESHOLD to set a custom threshold
|
|
lf_ed_threshold = 8bits threshold value.
|
|
|
|
conf_word 12bits
|
|
conf_word[7:5] = 3bit major mode.
|
|
conf_word[0] = 1bit lf_field
|
|
conf_word[1] = 1bit lf_ed_toggle_mode
|
|
conf_word[7:0] = 8bit divisor
|
|
conf_word[7:0] = 8bit threshold
|
|
|
|
*/
|
|
// Defining commands, modes and options. This must be aligned to the definitions in armsrc/fpgaloader.h
|
|
// Note: the definitions here are without shifts
|
|
|
|
// Definitions for the FPGA commands.
|
|
`define FPGA_CMD_SET_CONFREG 1
|
|
`define FPGA_CMD_SET_DIVISOR 2
|
|
`define FPGA_CMD_SET_EDGE_DETECT_THRESHOLD 3
|
|
`define FPGA_CMD_TRACE_ENABLE 2
|
|
|
|
// Major modes
|
|
`define FPGA_MAJOR_MODE_LF_READER 0
|
|
`define FPGA_MAJOR_MODE_LF_EDGE_DETECT 1
|
|
`define FPGA_MAJOR_MODE_LF_PASSTHRU 2
|
|
`define FPGA_MAJOR_MODE_LF_ADC 3
|
|
`define FPGA_MAJOR_MODE_HF_READER 0
|
|
`define FPGA_MAJOR_MODE_HF_SIMULATOR 1
|
|
`define FPGA_MAJOR_MODE_HF_ISO14443A 2
|
|
`define FPGA_MAJOR_MODE_HF_SNIFF 3
|
|
`define FPGA_MAJOR_MODE_HF_ISO18092 4
|
|
`define FPGA_MAJOR_MODE_HF_GET_TRACE 5
|
|
`define FPGA_MAJOR_MODE_OFF 7
|
|
|
|
// Options for LF_READER
|
|
`define FPGA_LF_ADC_READER_FIELD 1
|
|
|
|
// Options for LF_EDGE_DETECT
|
|
`define FPGA_LF_EDGE_DETECT_READER_FIELD 1
|
|
`define FPGA_LF_EDGE_DETECT_TOGGLE_MODE 2
|
|
|
|
// Options for the generic HF reader
|
|
`define FPGA_HF_READER_MODE_RECEIVE_IQ 0
|
|
`define FPGA_HF_READER_MODE_RECEIVE_AMPLITUDE 1
|
|
`define FPGA_HF_READER_MODE_RECEIVE_PHASE 2
|
|
`define FPGA_HF_READER_MODE_SEND_FULL_MOD 3
|
|
`define FPGA_HF_READER_MODE_SEND_SHALLOW_MOD 4
|
|
`define FPGA_HF_READER_MODE_SNIFF_IQ 5
|
|
`define FPGA_HF_READER_MODE_SNIFF_AMPLITUDE 6
|
|
`define FPGA_HF_READER_MODE_SNIFF_PHASE 7
|
|
`define FPGA_HF_READER_MODE_SEND_JAM 8
|
|
`define FPGA_HF_READER_MODE_SEND_SHALLOW_MOD_RDV4 9
|
|
|
|
`define FPGA_HF_READER_SUBCARRIER_848_KHZ 0
|
|
`define FPGA_HF_READER_SUBCARRIER_424_KHZ 1
|
|
`define FPGA_HF_READER_SUBCARRIER_212_KHZ 2
|
|
`define FPGA_HF_READER_2SUBCARRIERS_424_484_KHZ 3
|
|
|
|
// Options for the HF simulated tag, how to modulate
|
|
`define FPGA_HF_SIMULATOR_NO_MODULATION 0
|
|
`define FPGA_HF_SIMULATOR_MODULATE_BPSK 1
|
|
`define FPGA_HF_SIMULATOR_MODULATE_212K 2
|
|
`define FPGA_HF_SIMULATOR_MODULATE_424K 4
|
|
`define FPGA_HF_SIMULATOR_MODULATE_424K_8BIT 5
|
|
|
|
// Options for ISO14443A
|
|
`define FPGA_HF_ISO14443A_SNIFFER 0
|
|
`define FPGA_HF_ISO14443A_TAGSIM_LISTEN 1
|
|
`define FPGA_HF_ISO14443A_TAGSIM_MOD 2
|
|
`define FPGA_HF_ISO14443A_READER_LISTEN 3
|
|
`define FPGA_HF_ISO14443A_READER_MOD 4
|
|
|
|
// Options for ISO18092 / Felica
|
|
`define FPGA_HF_ISO18092_FLAG_NOMOD 1 // 0001 disable modulation module
|
|
`define FPGA_HF_ISO18092_FLAG_424K 2 // 0010 should enable 414k mode (untested). No autodetect
|
|
`define FPGA_HF_ISO18092_FLAG_READER 4 // 0100 enables antenna power, to act as a reader instead of tag
|