proxmark3/COMPILING.txt

The project compiles on Linux, Mac OS X and Windows (MinGW/MSYS).

it requires:
- gcc >= 4.8
- libpthread
- libreadline
- libusb
- perl
- an ARM cross-compiler to compile the firmware
- libncurses5-dev

and optionally QT for the GUI


To compile, just run "make".

===========
= Windows =
===========

Rather than download and install every one of these packages, a new ProxSpace 
environment archive file will be made available for download on the project
page at @Gator96100's repo

Afterwards just clone the iceman repo or download someone elses.  Read instructions on @Gator96100 repo page. (https://github.com/Gator96100/ProxSpace/)

Download the ProxSpace environment archive and extract it to C:\

Links
  https://github.com/Gator96100/ProxSpace/archive/master.zip


-- OR --

Use the following list of packages required to setup the compile environment yourself.

1 - Install QT SDK for Windows [1]

In the following instructions, we'll assume you installed it to C:\QT

2 - MSYS-1.0.11 [2]

Just follow the installation procedure.
When asked if you have MinGW installed and for its path, provide:
C:/QT/mingw

3 - readline-5.0-1-bin [5]

From this archive, copy:
bin/* to C:\QT\mingw\bin
include/* to C:\QT\mingw\include
lib/*.a to C:\QT\mingw\lib

4 - libusb-win32-device-bin-0.1.12.2 [6]

Be careful here, it is *NOT* working with the filter version!
Likewise copy:
include/usb.h to C:\QT\mingw\include
lib/gcc/libusb.a to C:\QT\mingw\lib


5 - Install DevkitPro [5]

You'll need it to compile the firmware (ARM) side.
You only need devkitARM, nothing more (no extra lib or anything else)
Assuming you installed it to C:\devkitpro, make sure you set
the DEVKITARM environment variable to /c/devkitPro/devkitARM :
export DEVKITARM=/c/devkitPro/devkitARM
Also, add its bin to your PATH:
export PATH=$PATH:$DEVKITARM/bin

6 - Install Strawberry Perl [6]

7 - Setup a few variables

In your shell from MSYS, make sure you set QTDIR to your QT installation:
export QTDIR=/c/QT/qt
And add its bin to your path as well:
export PATH=$PATH:$QTDIR/bin

Download links:

[1] http://qt.nokia.com/downloads/sdk-windows-cpp
[2] http://downloads.sourceforge.net/mingw/MSYS-1.0.11.exe
[3] http://sourceforge.net/projects/gnuwin32/files/readline/5.0-1/readline-5.0-1-bin.zip/download
[4] http://sourceforge.net/projects/libusb-win32/files/libusb-win32-releases/0.1.12.2/libusb-win32-device-bin-0.1.12.2.tar.gz/download
[5] http://sourceforge.net/projects/devkitpro/files/Automated%20Installer/devkitProUpdater-1.5.0.exe/download
[6] http://strawberry-perl.googlecode.com/files/strawberry-perl-5.10.1.1.msi


============
= Mac OS X =
============

Installing from HomeBrew tap
---------------------------
This method is recommended and tested on macOS Sierra 10.12.3

1. Install homebrew if you haven't yet already done so: http://brew.sh/

2. Tap proxmark repo:
    brew tap iceman1001/proxmark3 

3. Install Proxmark3:

Stable release
    brew install proxmark3

Latest non-stable from GitHub (use this if previous command fails)
    brew install --HEAD proxmark3

For more information go to https://github.com/iceman1001/homebrew-proxmark3

Upgrading HomeBrew tap formula
-----------------------------
*This method is useful for those looking to run bleeding-edge versions of iceman's client. Keep this in mind when attempting to update your HomeBrew tap formula as this procedure could easily cause a build to break if an update is unstable on macOS.* 

Tested on macOS Sierra 10.12.6

*Note: This assumes you have already installed iceman's fork from HomeBrew as mentioned above*

1. Force HomeBrew to pull the latest source from github
`brew upgrade --fetch-HEAD iceman1001/proxmark3/proxmark3`
 
2. Flash the bootloader
  * With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark 3 as you plug it into a USB port. After about 5 seconds let go of the button and run this command
   `$ sudo proxmark3-flasher /dev/tty.usbmodem881 /usr/local/Cellar/proxmark3/HEAD-ccfdd60/share/firmware/fullimage.elf`
  * After the bootloader finishes flashing, unplug your Proxmark3 from your machine
  
3. Flash fullimage.elf
  * Press and hold the button on your Proxmark 3 and keep it held as you plug the Proxmark 3 back into the USB port; continue to hold the button until after this step is complete and the `proxmark3-flasher` command outputs "Have a nice day!"*

`$ sudo proxmark3-flasher /dev/tty.usbmodem881 /usr/local/Cellar/proxmark3/HEAD-ccfdd60/share/firmware/fullimage.elf`

4. Enjoy the update

Compilling from source manually (Legacy)
---------------------------

Tested on OSX 10.10 Yosemite

1 - Install Xcode and Xcode Command Line Tools

2 - Install Homebrew and dependencies
    brew install readline libusb p7zip libusb-compat wget qt5 pkgconfig

3 - Download DevKitARM for OSX
    http://sourceforge.net/projects/devkitpro/files/devkitARM/devkitARM_r44/
    Unpack devkitARM_r44-osx.tar.bz2 to proxmark3 directory.

4 - Edit proxmark3/client/Makefile adding path to readline and qt5

    LDLIBS = -L/usr/local/opt/readline/lib -L/usr/local/opt/qt5/lib -L/opt/local/lib -L/usr/local/lib ../liblua/liblua.a -lreadline -lpthread -lm
    CFLAGS = -std=c99 -I/usr/local/opt/qt5/include -I/usr/local/opt/readline/include -I. -I../include -I../common -I../zlib -I/opt/local/include -I../liblua -Wall $(COMMON_FLAGS) -g -O4

    If your old brew intallation use /usr/local/Cellar/ path replace /usr/local/opt/readline/lib with your actuall readline and qt5 path. See homebrew manuals.

5 - Set Environment

    export DEVKITPRO=$HOME/proxmark3/
    export DEVKITARM=$DEVKITPRO/devkitARM
    export PATH=${PATH}:${DEVKITARM}/bin


============
=   Linux  =
============

1 - Download 

A precompiled DevKitARM cross compiler tool chain package can be found at 
http://sourceforge.net/projects/devkitpro/files/devkitARM
Select the one you need (32bit or 64bit) and unpack to a convinient place, eg 
$HOME/proxmark3/. It will create a devkitARM/ subdirectory.

You will also need a general compiling environment on your computer for
the client and the libusb headers. In most distributions you will get all you 
need with the lsb-package (Linux Standard Base). In debian/ubuntu you simply 
call `aptitude install lsb libusb-dev libreadline-dev libreadline6`. 

For the graphical plot view, you might need the qtlibs (debian/ubuntu: 
libqt4-dev), too.

2 - Set Environment

export DEVKITPRO=$HOME/proxmark3/
export DEVKITARM=$DEVKITPRO/devkitARM
export PATH=${PATH}:${DEVKITARM}/bin