mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2025-01-05 07:36:14 +08:00
644 lines
No EOL
19 KiB
C
644 lines
No EOL
19 KiB
C
#include "proxmark3.h"
|
|
#include "apps.h"
|
|
#include "BigBuf.h"
|
|
#include "util.h"
|
|
#include "usb_cdc.h" // for usb_poll_validate_length
|
|
#include "protocols.h"
|
|
|
|
//random service RW: 0x0009
|
|
//random service RO: 0x000B
|
|
|
|
//structure to hold outgoing NFC frame
|
|
static uint8_t frameSpace[MAX_FRAME_SIZE+4];
|
|
|
|
//structure to hold incoming NFC frame, used for ISO/IEC 18092-compatible frames
|
|
static struct {
|
|
enum {
|
|
STATE_UNSYNCD,
|
|
STATE_TRYING_SYNC,
|
|
STATE_GET_LENGTH,
|
|
STATE_GET_DATA,
|
|
STATE_GET_CRC,
|
|
STATE_FULL
|
|
} state;
|
|
|
|
uint16_t shiftReg; //for synchronization and offset calculation
|
|
int posCnt;
|
|
uint8_t crc_ok;
|
|
int rem_len;
|
|
uint16_t len;
|
|
uint8_t byte_offset;
|
|
uint16_t rolling_crc;
|
|
uint8_t framebytes[260]; //should be enough. maxlen is 255, 254 for data, 2 for sync, 2 for crc
|
|
// 0,1 -> SYNC, 2 - len, 3-(len+1)->data, then crc
|
|
} NFCFrame;
|
|
|
|
//b2 4d is SYNC, 45645 in 16-bit notation, 10110010 01001101 binary. Frame will not start filling until this is shifted in
|
|
//bit order in byte -reverse, I guess? [((bt>>0)&1),((bt>>1)&1),((bt>>2)&1),((bt>>3)&1),((bt>>4)&1),((bt>>5)&1),((bt>>6)&1),((bt>>7)&1)] -at least in the mode that I read those in
|
|
|
|
# define SYNC_16BIT 45645
|
|
|
|
static void ResetNFCFrame() {
|
|
NFCFrame.state = STATE_UNSYNCD;
|
|
NFCFrame.posCnt = 0;
|
|
NFCFrame.crc_ok = 0;
|
|
NFCFrame.byte_offset = 0;
|
|
NFCFrame.rolling_crc = 0;
|
|
}
|
|
|
|
//shift byte into frame, reversing it at the same time
|
|
static void shiftInByte(uint8_t bt) {
|
|
|
|
for(int j=0; j < NFCFrame.byte_offset; j++) {
|
|
NFCFrame.framebytes[NFCFrame.posCnt] = ( NFCFrame.framebytes[NFCFrame.posCnt]<<1 ) + (bt & 1);
|
|
bt >>= 1;
|
|
}
|
|
NFCFrame.posCnt++;
|
|
NFCFrame.rem_len--;
|
|
for(int j = NFCFrame.byte_offset; j<8; j++) {
|
|
NFCFrame.framebytes[NFCFrame.posCnt] = (NFCFrame.framebytes[NFCFrame.posCnt]<<1 ) + (bt & 1);
|
|
bt >>= 1;
|
|
}
|
|
}
|
|
|
|
//crc table - from lammertb/libcrc
|
|
static uint16_t crc_tabccitt[256];
|
|
static uint8_t crc_tabccitt_init = 0;
|
|
|
|
static void init_crcccitt_tab( void ) {
|
|
uint16_t i, j, crc, c;
|
|
|
|
for (i=0; i<256; i++) {
|
|
|
|
crc = 0;
|
|
c = i << 8;
|
|
|
|
for (j=0; j<8; j++) {
|
|
|
|
if ( (crc ^ c) & 0x8000 )
|
|
crc = ( crc << 1 ) ^ 0x1021;
|
|
else
|
|
crc = crc << 1;
|
|
|
|
c = c << 1;
|
|
}
|
|
crc_tabccitt[i] = crc;
|
|
}
|
|
crc_tabccitt_init = true;
|
|
}
|
|
|
|
static uint16_t update_crc_ccitt( uint16_t crc, unsigned char c ) {
|
|
return (crc << 8) ^ crc_tabccitt[ ((crc >> 8) ^ (uint16_t) c) & 0x00FF ];
|
|
}
|
|
|
|
void SetcrcToFrame(uint8_t * framebf) {
|
|
//expect framebuf to be preset with len...
|
|
uint16_t crc = 0;
|
|
for (int i=2; i < 2 + framebf[2]; i++) {
|
|
crc = update_crc_ccitt(crc, framebf[i]);
|
|
}
|
|
framebf[2 + framebf[2]] = (crc >> 8);
|
|
framebf[3 + framebf[2]] = (crc & 0xff);
|
|
}
|
|
|
|
static void ProcessNFCByte(uint8_t bt) {
|
|
switch (NFCFrame.state) {
|
|
case STATE_UNSYNCD: {
|
|
//almost any nonzero byte can be start of SYNC. SYNC should be preceded by zeros, but that is not alsways the case
|
|
if (bt > 0) {
|
|
NFCFrame.shiftReg = reflect(bt, 8);
|
|
NFCFrame.state = STATE_TRYING_SYNC;
|
|
}
|
|
break;
|
|
}
|
|
case STATE_TRYING_SYNC: {
|
|
if (bt == 0) {
|
|
//desync
|
|
NFCFrame.shiftReg = bt;
|
|
NFCFrame.state = STATE_UNSYNCD;
|
|
} else {
|
|
for (int i=0; i<8; i++) {
|
|
|
|
if (NFCFrame.shiftReg == SYNC_16BIT) {
|
|
//SYNC done!
|
|
NFCFrame.state = STATE_GET_LENGTH;
|
|
NFCFrame.framebytes[0] = 0xb2;
|
|
NFCFrame.framebytes[1] = 0x4d; //write SYNC
|
|
NFCFrame.byte_offset = i;
|
|
//shift in remaining byte, slowly...
|
|
for(int j=i; j<8; j++) {
|
|
NFCFrame.framebytes[2] = (NFCFrame.framebytes[2] << 1) + (bt & 1);
|
|
bt >>= 1;
|
|
}
|
|
|
|
NFCFrame.posCnt = 2;
|
|
if (i==0)
|
|
break;
|
|
}
|
|
NFCFrame.shiftReg = (NFCFrame.shiftReg << 1) + (bt & 1);
|
|
bt >>= 1;
|
|
}
|
|
|
|
//that byte was last byte of sync
|
|
if (NFCFrame.shiftReg == SYNC_16BIT) {
|
|
//Force SYNC on next byte
|
|
NFCFrame.state = STATE_GET_LENGTH;
|
|
NFCFrame.framebytes[0] = 0xb2;
|
|
NFCFrame.framebytes[1] = 0x4d;
|
|
NFCFrame.byte_offset = 0;
|
|
NFCFrame.posCnt = 1;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
case STATE_GET_LENGTH: {
|
|
shiftInByte(bt);
|
|
NFCFrame.rem_len = NFCFrame.framebytes[2] - 1;
|
|
NFCFrame.rolling_crc = update_crc_ccitt(0, NFCFrame.framebytes[2]); //start calculating CRC for later
|
|
NFCFrame.len = NFCFrame.framebytes[2] + 4; //with crc and sync
|
|
NFCFrame.state = STATE_GET_DATA;
|
|
break;
|
|
}
|
|
case STATE_GET_DATA: {
|
|
shiftInByte(bt);
|
|
if (NFCFrame.byte_offset != 0)
|
|
NFCFrame.rolling_crc = update_crc_ccitt(NFCFrame.rolling_crc, NFCFrame.framebytes[NFCFrame.posCnt-1] );
|
|
else
|
|
NFCFrame.rolling_crc = update_crc_ccitt(NFCFrame.rolling_crc, NFCFrame.framebytes[NFCFrame.posCnt]);
|
|
|
|
if (NFCFrame.rem_len <= 0) {
|
|
NFCFrame.state = STATE_GET_CRC;
|
|
NFCFrame.rem_len = 2;
|
|
}
|
|
break;
|
|
}
|
|
case STATE_GET_CRC: {
|
|
shiftInByte(bt);
|
|
if ( NFCFrame.rem_len <= 0 ) {
|
|
NFCFrame.crc_ok = ((NFCFrame.rolling_crc & 0xff) == NFCFrame.framebytes[NFCFrame.len-1] && (NFCFrame.rolling_crc >> 8) == NFCFrame.framebytes[NFCFrame.len-2]);
|
|
NFCFrame.state = STATE_FULL;
|
|
NFCFrame.rem_len = 0;
|
|
}
|
|
break;
|
|
}
|
|
case STATE_FULL: //ignore byte. Don't forget to clear frame to receive next one...
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void HfSnoopISO18(uint32_t samplesToSkip, uint32_t triggersToSkip) {
|
|
if (!crc_tabccitt_init)
|
|
init_crcccitt_tab();
|
|
|
|
int remFrames = (samplesToSkip) ? samplesToSkip : 0;
|
|
|
|
Dbprintf("Snoop FelicaLiteS: Getting first %d frames, Skipping %d triggers.\n", samplesToSkip, triggersToSkip);
|
|
|
|
LED_D_ON();
|
|
// Select correct configs
|
|
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
|
|
// Set up the synchronous serial port
|
|
FpgaSetupSsc();
|
|
// connect Demodulated Signal to ADC:
|
|
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
|
|
|
|
BigBuf_free(); BigBuf_Clear_ext(false);
|
|
clear_trace();
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092|FPGA_HF_ISO18092_FLAG_NOMOD);
|
|
AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
|
|
SpinDelay(100);
|
|
|
|
//the frame bits are slow enough.
|
|
int n = BigBuf_max_traceLen() / sizeof(uint8_t); // take all memory
|
|
int numbts = 0;
|
|
uint8_t *dest = (uint8_t *)BigBuf_get_addr();
|
|
uint8_t *destend = dest + n-2;
|
|
|
|
ResetNFCFrame();
|
|
|
|
StartCountSspClk(); //for apx frame timing
|
|
|
|
uint32_t endframe = GetCountSspClk();
|
|
|
|
while (dest <= destend) {
|
|
WDT_HIT();
|
|
if( BUTTON_PRESS()) break;
|
|
|
|
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
|
|
uint8_t dist = (uint8_t)(AT91C_BASE_SSC->SSC_RHR);
|
|
ProcessNFCByte(dist);
|
|
|
|
//to be sure we are in frame
|
|
if (NFCFrame.state == STATE_GET_LENGTH) {
|
|
//length is after 48 (PRE)+16 (SYNC) - 64 ticks +maybe offset? not 100%
|
|
uint16_t distance = GetCountSspClk() - endframe - 64 + (NFCFrame.byte_offset > 0 ? (8-NFCFrame.byte_offset) : 0);
|
|
*dest = distance >> 8;
|
|
dest++;
|
|
*dest = (distance & 0xff);
|
|
dest++;
|
|
}
|
|
//crc NOT checked
|
|
if (NFCFrame.state == STATE_FULL) {
|
|
endframe = GetCountSspClk();
|
|
*dest = NFCFrame.crc_ok; //kind of wasteful
|
|
dest++;
|
|
for(int i=0; i < NFCFrame.len; i++) {
|
|
*dest = NFCFrame.framebytes[i];
|
|
dest++;
|
|
if (dest >= destend ) break;
|
|
|
|
}
|
|
|
|
remFrames--;
|
|
if (remFrames <= 0) break;
|
|
if (dest >= destend ) break;
|
|
|
|
numbts += NFCFrame.len;
|
|
|
|
ResetNFCFrame();
|
|
}
|
|
}
|
|
}
|
|
|
|
switch_off();
|
|
|
|
//reset framing
|
|
AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
|
|
set_tracelen(numbts);
|
|
|
|
Dbprintf("Felica sniffing done, tracelen: %i, use hf list felica for annotations", BigBuf_get_traceLen());
|
|
cmd_send(CMD_ACK,1, numbts,0,0,0);
|
|
}
|
|
|
|
// poll-0: 0xb2,0x4d,0x06,0x00,0xff,0xff,0x00,0x00,0x09,0x21,
|
|
// resp: 0xb2,0x4d,0x12,0x01,0x01,0x2e,0x3d,0x17,0x26,0x47,0x80,0x95,0x00,0xf1,0x00,0x00,0x00,0x01,0x43,0x00,0xb3,0x7f,
|
|
// poll-1 (reply with available system codes - NFC Tag3 specs, IIRC): 0xb2,0x4d,0x06,0x00,0xff,0xff,0x01,0x00,0x3a,0x10
|
|
// resp: 0xb2,0x4d,0x14,0x01, 0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX, 0x00,0xf1,0x00,0x00,0x00,0x01,0x43,0x00, 0x88,0xb4,0x0c,0xe2,
|
|
// page-req: 0xb2,0x4d,0x10,0x06, 0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX, 0x01, 0x0b,0x00, 0x01, 0x80,0x00, 0x2e,0xb3,
|
|
// page-req: 0x06, IDm(8), ServiceNum(1),Slist(2*num) BLocknum (1) BLockids(2-3*num)
|
|
// page-resp: 0xb2,0x4d,0x1d,0x07, 0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX,0xXX, 0x00, 0x00, 0x01, 0x10,0x04,0x01,0x00,0x0d,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x23, 0xcb,0x6e,
|
|
|
|
//builds a readblock frame for felica lite(s). Felica standart has a different file system, AFAIK
|
|
// 8-byte ndef, number of blocks, blocks numbers
|
|
// number of blocks limited to 4 for FelicaLite(S)
|
|
static void BuildFliteRdblk(uint8_t* ndef, int blocknum,uint16_t * blocks ) {
|
|
|
|
if (blocknum > 4 || blocknum <= 0)
|
|
Dbprintf("Invalid number of blocks, %d. Up to 4 are allowed.", blocknum);
|
|
|
|
int c = 0, i = 0;
|
|
frameSpace[c++] = 0xb2;
|
|
frameSpace[c++] = 0x4d;
|
|
c++; //set length later
|
|
frameSpace[c++] = FELICA_RDBLK_REQ; //command number
|
|
for (i=0; i <8; i++) //card IDm, from poll
|
|
frameSpace[c++] = ndef[i];
|
|
|
|
frameSpace[c++]= 0x01; //number of services
|
|
frameSpace[c++]= (uint8_t)(((uint16_t)FLITE_SERVICE_RO)&0xff);//service code -big endian?
|
|
frameSpace[c++]= (uint8_t)(((uint16_t)FLITE_SERVICE_RO)>>8);
|
|
frameSpace[c++]= blocknum; //number of blocks
|
|
for (i=0; i < blocknum; i++) {
|
|
|
|
//3-byte block
|
|
if (blocks[i] >= 256) {
|
|
frameSpace[c++] = 0x00;
|
|
frameSpace[c++] = (blocks[i] >> 8); //block number, little endian....
|
|
frameSpace[c++] = (blocks[i] & 0xff);
|
|
} else {
|
|
frameSpace[c++] = 0x80;
|
|
frameSpace[c++] = blocks[i];
|
|
}
|
|
}
|
|
frameSpace[2] = c-2; //set length
|
|
SetcrcToFrame(frameSpace);
|
|
}
|
|
|
|
//legacy, technically.
|
|
static int manch_tbl_fill = 0;
|
|
static uint8_t manch_tbl[16] = {0};
|
|
|
|
static void fillManch() {
|
|
for(uint8_t obs = 0; obs < 16; obs++) {
|
|
uint8_t res = 0;
|
|
uint8_t tmp = obs << 4;
|
|
for(int j=0; j<4; j++) {
|
|
res <<= 2;
|
|
if (tmp & 0x80)
|
|
res += 2;
|
|
else
|
|
res += 1;
|
|
tmp <<= 1;
|
|
}
|
|
manch_tbl[obs] = res;
|
|
}
|
|
manch_tbl_fill = 1;
|
|
}
|
|
|
|
static void TransmitFor18092_AsReader(uint8_t * frame, int len, uint32_t waitTill, uint8_t power, uint8_t highspeed) {
|
|
if (!manch_tbl_fill)
|
|
fillManch();
|
|
|
|
volatile uint32_t b;
|
|
int c;
|
|
uint32_t ThisTransferTime = 0;
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092 | (power ? FPGA_HF_ISO18092_FLAG_READER : 0) | ( highspeed ? FPGA_HF_ISO18092_FLAG_424K : 0) );
|
|
|
|
if (power)
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092 | FPGA_HF_ISO18092_FLAG_READER | (highspeed > 0) );
|
|
else
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092 );
|
|
|
|
if (waitTill > 0) {
|
|
while( (ThisTransferTime = GetCountSspClk()) < waitTill)
|
|
WDT_HIT();
|
|
}
|
|
|
|
//preamble
|
|
for (c = 0; c < 6;) {
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
|
|
AT91C_BASE_SSC->SSC_THR = 0x00;
|
|
c++;
|
|
}
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
|
b = (uint16_t)(AT91C_BASE_SSC->SSC_RHR); (void)b;
|
|
}
|
|
}
|
|
|
|
for (c = 0; c < len;) {
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
|
|
AT91C_BASE_SSC->SSC_THR = frame[c];
|
|
c++;
|
|
}
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
|
b = (uint16_t)(AT91C_BASE_SSC->SSC_RHR); (void)b;
|
|
}
|
|
}
|
|
|
|
while (!(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY))) {};
|
|
AT91C_BASE_SSC->SSC_THR = 0x00; //minimum delay
|
|
|
|
while (!(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY))) {};
|
|
AT91C_BASE_SSC->SSC_THR = 0x00; //spin
|
|
|
|
//disable
|
|
if (power)
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092 |FPGA_HF_ISO18092_FLAG_READER | 1);
|
|
else
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092 | 1 );
|
|
}
|
|
|
|
#define R_POLL0_LEN 0x16
|
|
#define R_POLL1_LEN 0x18
|
|
#define R_READBLK_LEN 0x21
|
|
//simulate NFC Tag3 card - for now only poll response works
|
|
// second half (4 bytes) of NDEF2 goes into nfcid2_0, first into nfcid2_1
|
|
void HfSimLite( uint64_t nfcid) {
|
|
|
|
if (!crc_tabccitt_init)
|
|
init_crcccitt_tab();
|
|
|
|
if (!manch_tbl_fill)
|
|
fillManch();
|
|
|
|
int i, curlen = 0;
|
|
uint8_t *curresp = 0;
|
|
|
|
uint8_t ndef[8];
|
|
num_to_bytes(nfcid, 8, ndef);
|
|
|
|
//prepare our 3 responses...
|
|
uint8_t resp_poll0[R_POLL0_LEN] = { 0xb2,0x4d,0x12,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf1,0x00,0x00,0x00,0x01,0x43,0x00,0xb3,0x7f};
|
|
uint8_t resp_poll1[R_POLL1_LEN] = { 0xb2,0x4d,0x14,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xf1,0x00,0x00,0x00,0x01,0x43,0x00, 0x88,0xb4,0xb3,0x7f};
|
|
uint8_t resp_readblk[R_READBLK_LEN] = { 0xb2,0x4d,0x1d,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x10,0x04,0x01,0x00,0x0d,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x23,0xcb,0x6e};
|
|
|
|
//NFC tag 3/ ISo technically. Many overlapping standards
|
|
DbpString("Felica Lite-S sim start");
|
|
Dbprintf("NDEF2 UID: %02x %02x %02x %02x %02x %02x %02x %02x",
|
|
ndef[0], ndef[1], ndef[2], ndef[3],
|
|
ndef[4], ndef[5], ndef[6], ndef[7]
|
|
);
|
|
|
|
//fill in blanks
|
|
for( i=0; i<8; i++) {
|
|
resp_poll0[i+4] = ndef[i];
|
|
resp_poll1[i+4] = ndef[i];
|
|
resp_readblk[i+4] = ndef[i];
|
|
}
|
|
|
|
//calculate and set CRC
|
|
SetcrcToFrame(resp_poll0);
|
|
SetcrcToFrame(resp_poll1);
|
|
SetcrcToFrame(resp_readblk);
|
|
|
|
// Select correct configs
|
|
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
|
|
// Set up the synchronous serial port
|
|
FpgaSetupSsc();
|
|
// connect Demodulated Signal to ADC:
|
|
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092 | FPGA_HF_ISO18092_FLAG_NOMOD);
|
|
SpinDelay(100);
|
|
|
|
//it might be possible to use MSB?
|
|
AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
|
|
|
|
ResetNFCFrame();
|
|
|
|
StartCountSspClk(); // should work without now, this is mostly for debugging
|
|
|
|
bool listenmode = true;
|
|
uint32_t frtm = GetCountSspClk();
|
|
for(;;) {
|
|
WDT_HIT();
|
|
|
|
if (listenmode) {
|
|
//waiting for request...
|
|
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
|
|
|
|
uint8_t dist = (uint8_t)(AT91C_BASE_SSC->SSC_RHR);
|
|
frtm = GetCountSspClk();
|
|
ProcessNFCByte(dist);
|
|
|
|
if (NFCFrame.state==STATE_FULL) {
|
|
|
|
if (NFCFrame.crc_ok) {
|
|
|
|
if (NFCFrame.framebytes[2] == 6 && NFCFrame.framebytes[3] == 0) {
|
|
|
|
//polling... there are two types of polling we answer to
|
|
if (NFCFrame.framebytes[6] == 0) {
|
|
curresp = resp_poll0;
|
|
curlen = R_POLL0_LEN;
|
|
listenmode = false;
|
|
}
|
|
if (NFCFrame.framebytes[6]==1) {
|
|
curresp = resp_poll1;
|
|
curlen = R_POLL1_LEN;
|
|
listenmode = true;
|
|
}
|
|
}
|
|
|
|
if (NFCFrame.framebytes[2] > 5 && NFCFrame.framebytes[3] == 0x06) {
|
|
//we should rebuild it depending on page size, but...
|
|
//Let's see first
|
|
curresp = resp_readblk;
|
|
curlen = R_READBLK_LEN;
|
|
listenmode = false;
|
|
}
|
|
//clear frame
|
|
ResetNFCFrame();
|
|
} else {
|
|
//frame invalid, clear it out to allow for the next one
|
|
ResetNFCFrame();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if (!listenmode) {
|
|
//trying to answer... here to start answering immediately.
|
|
//this one is a bit finicky. Seems that being a bit late is better than earlier
|
|
TransmitFor18092_AsReader(curresp, curlen, frtm+512, 0, 0);
|
|
|
|
//switch back
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092 | FPGA_HF_ISO18092_FLAG_NOMOD);
|
|
|
|
ResetNFCFrame();
|
|
listenmode = true;
|
|
curlen = 0;
|
|
curresp = NULL;
|
|
}
|
|
if( BUTTON_PRESS()) break;
|
|
}
|
|
|
|
switch_off();
|
|
DbpString("Felica Lite-S sim end");
|
|
}
|
|
|
|
int WaitForFelicaReply(int maxbytes) {
|
|
int bcnt = 0;
|
|
ResetNFCFrame();
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092 | FPGA_HF_ISO18092_FLAG_NOMOD | FPGA_HF_ISO18092_FLAG_READER);
|
|
|
|
for (; bcnt < maxbytes; ) {
|
|
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
|
|
uint8_t dist = (uint8_t)(AT91C_BASE_SSC->SSC_RHR);
|
|
|
|
ProcessNFCByte(dist);
|
|
bcnt++;
|
|
if (NFCFrame.state == STATE_FULL) {
|
|
if (NFCFrame.crc_ok) {
|
|
return 1;
|
|
} else {
|
|
Dbprintf("Got frame %d with wrong crc, crc %02x %02x"
|
|
, NFCFrame.framebytes[3]
|
|
, (NFCFrame.rolling_crc & 0xff)
|
|
, (NFCFrame.rolling_crc >> 8)
|
|
);
|
|
Dbhexdump(25, NFCFrame.framebytes, false);
|
|
return 0;
|
|
}
|
|
break ;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void HfDumpFelicaLiteS() {
|
|
|
|
// setup device.
|
|
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
|
|
|
|
// connect Demodulated Signal to ADC:
|
|
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
|
|
|
|
// Set up the synchronous serial port
|
|
FpgaSetupSsc();
|
|
|
|
// allocate command receive buffer
|
|
BigBuf_free(); BigBuf_Clear_ext(false);
|
|
|
|
LED_D_ON();
|
|
|
|
uint8_t ndef[8];
|
|
uint8_t poll[10] = { 0xb2,0x4d,0x06,0x00,0xff,0xff,0x00,0x00,0x09,0x21};
|
|
uint16_t liteblks[28] = {0x00, 0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x90,0x91,0x92,0xa0};
|
|
|
|
if (!crc_tabccitt_init)
|
|
init_crcccitt_tab();
|
|
|
|
if (!manch_tbl_fill)
|
|
fillManch();
|
|
|
|
ResetNFCFrame();
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_ISO18092 | FPGA_HF_ISO18092_FLAG_READER |FPGA_HF_ISO18092_FLAG_NOMOD);
|
|
|
|
AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
|
|
SpinDelay(100);
|
|
|
|
// Start the timer
|
|
StartCountSspClk();
|
|
|
|
int c;
|
|
bool isOK = false;
|
|
uint16_t cnt = 0, cntfails = 0;
|
|
uint8_t *dest = (uint8_t *)BigBuf_get_addr();
|
|
|
|
while (!BUTTON_PRESS() && !usb_poll_validate_length()) {
|
|
|
|
WDT_HIT();
|
|
|
|
TransmitFor18092_AsReader(poll, 10, GetCountSspClk()+8, 1, 0);
|
|
|
|
if (WaitForFelicaReply(512) && NFCFrame.framebytes[3] == FELICA_POLL_ACK) {
|
|
|
|
for (c=0; c < 8; c++)
|
|
ndef[c] = NFCFrame.framebytes[c+4];
|
|
|
|
for (c=0; c < 28;) {
|
|
BuildFliteRdblk(ndef, 1, &liteblks[c]);
|
|
|
|
TransmitFor18092_AsReader(frameSpace, frameSpace[2]+4, GetCountSspClk()+8, 1, 0);
|
|
|
|
if (WaitForFelicaReply(1024) && NFCFrame.framebytes[3] == FELICA_RDBLK_ACK) {
|
|
|
|
dest[cnt++] = liteblks[c];
|
|
|
|
uint8_t * fb = NFCFrame.framebytes;
|
|
dest[cnt++] = fb[12];
|
|
dest[cnt++] = fb[13];
|
|
|
|
for(uint8_t j=0; j < 16; j++)
|
|
dest[cnt++] = fb[15+j];
|
|
|
|
c++;
|
|
cntfails = 0;
|
|
} else {
|
|
cntfails++;
|
|
if (cntfails > 12) {
|
|
c++;
|
|
cntfails = 0;
|
|
}
|
|
}
|
|
}
|
|
isOK = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
switch_off();
|
|
|
|
//Resetting Frame mode (First set in fpgaloader.c)
|
|
AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
|
|
|
|
//setting tracelen - important! it was set by buffer overflow before
|
|
set_tracelen(cnt);
|
|
cmd_send(CMD_ACK, isOK, cnt, 0, 0, 0);
|
|
} |