mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-11 18:33:18 +08:00
d19754567d
* .h include only the strict minimum for their own parsing * this forces all files to include explicitment their needs and not count on far streched dependencies * this helps Makefile to rebuild only the minimum * according to this rule, most standalone .h are now gone * big app.h is gone * remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway * all unrequired include were removed * split common/ into common/ (client+arm) and common_arm/ (os+bootloader) * bring zlib to common/ * bring stuff not really/not yet used in common back to armsrc/ or client/ * bring liblua into client/ * bring uart into client/ * move some portions of code around (dbprint, protocols,...) * rename unused files into *_disabled.[ch] to make it explicit * rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash * remove PrintAndLogDevice * move deprecated-hid-flasher from client to tools * Makefiles * treat deps in armsrc/ as in client/ * client: stop on warning (-Werror), same as for armsrc/ Tested on: * all standalone modes * Linux
123 lines
4.9 KiB
C
123 lines
4.9 KiB
C
//-----------------------------------------------------------------------------
|
|
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
|
|
// at your option, any later version. See the LICENSE.txt file for the text of
|
|
// the license.
|
|
//-----------------------------------------------------------------------------
|
|
// ISO15693 other commons
|
|
//-----------------------------------------------------------------------------
|
|
// Adrian Dabrowski 2010 and otherss
|
|
// Christian Herrmann 2018
|
|
|
|
#ifndef ISO15693_H__
|
|
#define ISO15693_H__
|
|
|
|
#include "common.h"
|
|
|
|
// REQUEST FLAGS
|
|
#define ISO15_REQ_SUBCARRIER_SINGLE 0x00 // Tag should respond using one subcarrier (ASK)
|
|
#define ISO15_REQ_SUBCARRIER_TWO 0x01 // Tag should respond using two subcarriers (FSK)
|
|
#define ISO15_REQ_DATARATE_LOW 0x00 // Tag should respond using low data rate
|
|
#define ISO15_REQ_DATARATE_HIGH 0x02 // Tag should respond using high data rate
|
|
#define ISO15_REQ_NONINVENTORY 0x00
|
|
#define ISO15_REQ_INVENTORY 0x04 // This is an inventory request - see inventory flags
|
|
#define ISO15_REQ_PROTOCOL_NONEXT 0x00
|
|
#define ISO15_REQ_PROTOCOL_EXT 0x08 // RFU
|
|
|
|
// REQUEST FLAGS when INVENTORY is not set
|
|
#define ISO15_REQ_SELECT 0x10 // only selected cards response
|
|
#define ISO15_REQ_ADDRESS 0x20 // this req contains an address
|
|
#define ISO15_REQ_OPTION 0x40 // Command specific option selector
|
|
|
|
//REQUEST FLAGS when INVENTORY is set
|
|
#define ISO15_REQINV_AFI 0x10 // AFI Field is present
|
|
#define ISO15_REQINV_SLOT1 0x20 // 1 Slot
|
|
#define ISO15_REQINV_SLOT16 0x00 // 16 Slots
|
|
#define ISO15_REQINV_OPTION 0x40 // Command specific option selector
|
|
|
|
//RESPONSE FLAGS
|
|
#define ISO15_RES_ERROR 0x01
|
|
#define ISO15_RES_EXT 0x08 // Protocol Extention
|
|
|
|
// RESPONSE ERROR CODES
|
|
#define ISO15_NOERROR 0x00
|
|
#define ISO15_ERROR_CMD_NOT_SUP 0x01 // Command not supported
|
|
#define ISO15_ERROR_CMD_NOT_REC 0x02 // Command not recognized (eg. parameter error)
|
|
#define ISO15_ERROR_CMD_OPTION 0x03 // Command option not supported
|
|
#define ISO15_ERROR_GENERIC 0x0F // No additional Info about this error
|
|
#define ISO15_ERROR_BLOCK_UNAVAILABLE 0x10
|
|
#define ISO15_ERROR_BLOCK_LOCKED_ALREADY 0x11 // cannot lock again
|
|
#define ISO15_ERROR_BLOCK_LOCKED 0x12 // cannot be changed
|
|
#define ISO15_ERROR_BLOCK_WRITE 0x13 // Writing was unsuccessful
|
|
#define ISO15_ERROR_BLOCL_WRITELOCK 0x14 // Locking was unsuccessful
|
|
|
|
// COMMAND CODES
|
|
#define ISO15_CMD_INVENTORY 0x01
|
|
#define ISO15_CMD_STAYQUIET 0x02
|
|
#define ISO15_CMD_READ 0x20
|
|
#define ISO15_CMD_WRITE 0x21
|
|
#define ISO15_CMD_LOCK 0x22
|
|
#define ISO15_CMD_READMULTI 0x23
|
|
#define ISO15_CMD_WRITEMULTI 0x24
|
|
#define ISO15_CMD_SELECT 0x25
|
|
#define ISO15_CMD_RESET 0x26
|
|
#define ISO15_CMD_WRITEAFI 0x27
|
|
#define ISO15_CMD_LOCKAFI 0x28
|
|
#define ISO15_CMD_WRITEDSFID 0x29
|
|
#define ISO15_CMD_LOCKDSFID 0x2A
|
|
#define ISO15_CMD_SYSINFO 0x2B
|
|
#define ISO15_CMD_SECSTATUS 0x2C
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Map a sequence of octets (~layer 2 command) into the set of bits to feed
|
|
// to the FPGA, to transmit that command to the tag.
|
|
// Mode: highspeed && one subcarrier (ASK)
|
|
//-----------------------------------------------------------------------------
|
|
|
|
// The sampling rate is 106.353 ksps/s, for T = 18.8 us
|
|
|
|
// SOF defined as
|
|
// 1) Unmodulated time of 56.64us
|
|
// 2) 24 pulses of 423.75kHz
|
|
// 3) logic '1' (unmodulated for 18.88us followed by 8 pulses of 423.75kHz)
|
|
|
|
static const int Iso15693FrameSOF[] = {
|
|
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
|
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
|
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
|
-1, -1, -1, -1,
|
|
-1, -1, -1, -1,
|
|
1, 1, 1, 1,
|
|
1, 1, 1, 1
|
|
};
|
|
static const int Iso15693Logic0[] = {
|
|
1, 1, 1, 1,
|
|
1, 1, 1, 1,
|
|
-1, -1, -1, -1,
|
|
-1, -1, -1, -1
|
|
};
|
|
static const int Iso15693Logic1[] = {
|
|
-1, -1, -1, -1,
|
|
-1, -1, -1, -1,
|
|
1, 1, 1, 1,
|
|
1, 1, 1, 1
|
|
};
|
|
|
|
// EOF defined as
|
|
// 1) logic '0' (8 pulses of 423.75kHz followed by unmodulated for 18.88us)
|
|
// 2) 24 pulses of 423.75kHz
|
|
// 3) Unmodulated time of 56.64us
|
|
static const int Iso15693FrameEOF[] = {
|
|
1, 1, 1, 1,
|
|
1, 1, 1, 1,
|
|
-1, -1, -1, -1,
|
|
-1, -1, -1, -1,
|
|
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
|
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
|
|
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
|
|
};
|
|
|
|
char *Iso15693sprintUID(char *target, uint8_t *uid);
|
|
|
|
#endif
|