mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-14 13:44:49 +08:00
3515 lines
119 KiB
C
3515 lines
119 KiB
C
//-----------------------------------------------------------------------------
|
|
// Merlok - June 2011, 2012
|
|
// Gerhard de Koning Gans - May 2008
|
|
// Hagen Fritsch - June 2010
|
|
//
|
|
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
|
|
// at your option, any later version. See the LICENSE.txt file for the text of
|
|
// the license.
|
|
//-----------------------------------------------------------------------------
|
|
// Routines to support ISO 14443 type A.
|
|
//-----------------------------------------------------------------------------
|
|
#include "iso14443a.h"
|
|
|
|
#define MAX_ISO14A_TIMEOUT 524288
|
|
static uint32_t iso14a_timeout;
|
|
|
|
uint8_t colpos = 0;
|
|
int rsamples = 0;
|
|
//int ReqCount;
|
|
//char CollisionIndicators[10*8];
|
|
|
|
uint8_t trigger = 0;
|
|
// the block number for the ISO14443-4 PCB
|
|
static uint8_t iso14_pcb_blocknum = 0;
|
|
static uint8_t* free_buffer_pointer;
|
|
|
|
//
|
|
// ISO14443 timing:
|
|
//
|
|
// minimum time between the start bits of consecutive transfers from reader to tag: 7000 carrier (13.56Mhz) cycles
|
|
#define REQUEST_GUARD_TIME (7000/16 + 1)
|
|
// minimum time between last modulation of tag and next start bit from reader to tag: 1172 carrier cycles
|
|
#define FRAME_DELAY_TIME_PICC_TO_PCD (1172/16 + 1)
|
|
// bool LastCommandWasRequest = false;
|
|
|
|
//
|
|
// Total delays including SSC-Transfers between ARM and FPGA. These are in carrier clock cycles (1/13,56MHz)
|
|
//
|
|
// When the PM acts as reader and is receiving tag data, it takes
|
|
// 3 ticks delay in the AD converter
|
|
// 16 ticks until the modulation detector completes and sets curbit
|
|
// 8 ticks until bit_to_arm is assigned from curbit
|
|
// 8*16 ticks for the transfer from FPGA to ARM
|
|
// 4*16 ticks until we measure the time
|
|
// - 8*16 ticks because we measure the time of the previous transfer
|
|
#define DELAY_AIR2ARM_AS_READER (3 + 16 + 8 + 8*16 + 4*16 - 8*16)
|
|
|
|
// When the PM acts as a reader and is sending, it takes
|
|
// 4*16 ticks until we can write data to the sending hold register
|
|
// 8*16 ticks until the SHR is transferred to the Sending Shift Register
|
|
// 8 ticks until the first transfer starts
|
|
// 8 ticks later the FPGA samples the data
|
|
// 1 tick to assign mod_sig_coil
|
|
#define DELAY_ARM2AIR_AS_READER (4*16 + 8*16 + 8 + 8 + 1)
|
|
|
|
// When the PM acts as tag and is receiving it takes
|
|
// 2 ticks delay in the RF part (for the first falling edge),
|
|
// 3 ticks for the A/D conversion,
|
|
// 8 ticks on average until the start of the SSC transfer,
|
|
// 8 ticks until the SSC samples the first data
|
|
// 7*16 ticks to complete the transfer from FPGA to ARM
|
|
// 8 ticks until the next ssp_clk rising edge
|
|
// 4*16 ticks until we measure the time
|
|
// - 8*16 ticks because we measure the time of the previous transfer
|
|
#define DELAY_AIR2ARM_AS_TAG (2 + 3 + 8 + 8 + 7*16 + 8 + 4*16 - 8*16)
|
|
|
|
// The FPGA will report its internal sending delay in
|
|
uint16_t FpgaSendQueueDelay;
|
|
// the 5 first bits are the number of bits buffered in mod_sig_buf
|
|
// the last three bits are the remaining ticks/2 after the mod_sig_buf shift
|
|
#define DELAY_FPGA_QUEUE (FpgaSendQueueDelay<<1)
|
|
|
|
// When the PM acts as tag and is sending, it takes
|
|
// 4*16 + 8 ticks until we can write data to the sending hold register
|
|
// 8*16 ticks until the SHR is transferred to the Sending Shift Register
|
|
// 8 ticks later the FPGA samples the first data
|
|
// + 16 ticks until assigned to mod_sig
|
|
// + 1 tick to assign mod_sig_coil
|
|
// + a varying number of ticks in the FPGA Delay Queue (mod_sig_buf)
|
|
#define DELAY_ARM2AIR_AS_TAG (4*16 + 8 + 8*16 + 8 + 16 + 1 + DELAY_FPGA_QUEUE)
|
|
|
|
// When the PM acts as sniffer and is receiving tag data, it takes
|
|
// 3 ticks A/D conversion
|
|
// 14 ticks to complete the modulation detection
|
|
// 8 ticks (on average) until the result is stored in to_arm
|
|
// + the delays in transferring data - which is the same for
|
|
// sniffing reader and tag data and therefore not relevant
|
|
#define DELAY_TAG_AIR2ARM_AS_SNIFFER (3 + 14 + 8)
|
|
|
|
// When the PM acts as sniffer and is receiving reader data, it takes
|
|
// 2 ticks delay in analogue RF receiver (for the falling edge of the
|
|
// start bit, which marks the start of the communication)
|
|
// 3 ticks A/D conversion
|
|
// 8 ticks on average until the data is stored in to_arm.
|
|
// + the delays in transferring data - which is the same for
|
|
// sniffing reader and tag data and therefore not relevant
|
|
#define DELAY_READER_AIR2ARM_AS_SNIFFER (2 + 3 + 8)
|
|
|
|
//variables used for timing purposes:
|
|
//these are in ssp_clk cycles:
|
|
static uint32_t NextTransferTime;
|
|
static uint32_t LastTimeProxToAirStart;
|
|
static uint32_t LastProxToAirDuration;
|
|
|
|
// CARD TO READER - manchester
|
|
// Sequence D: 11110000 modulation with subcarrier during first half
|
|
// Sequence E: 00001111 modulation with subcarrier during second half
|
|
// Sequence F: 00000000 no modulation with subcarrier
|
|
// Sequence COLL: 11111111 load modulation over the full bitlenght.
|
|
// Tricks the reader to think that multiple cards answer (at least one card with 1 and at least one card with 0).
|
|
// READER TO CARD - miller
|
|
// Sequence X: 00001100 drop after half a period
|
|
// Sequence Y: 00000000 no drop
|
|
// Sequence Z: 11000000 drop at start
|
|
#define SEC_D 0xf0
|
|
#define SEC_E 0x0f
|
|
#define SEC_F 0x00
|
|
#define SEC_COLL 0xff
|
|
#define SEC_X 0x0c
|
|
#define SEC_Y 0x00
|
|
#define SEC_Z 0xc0
|
|
|
|
void iso14a_set_trigger(bool enable) {
|
|
trigger = enable;
|
|
}
|
|
|
|
void iso14a_set_timeout(uint32_t timeout) {
|
|
iso14a_timeout = timeout + (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8) + 2;
|
|
}
|
|
|
|
uint32_t iso14a_get_timeout(void) {
|
|
return iso14a_timeout - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/(16*8) - 2;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Generate the parity value for a byte sequence
|
|
//-----------------------------------------------------------------------------
|
|
void GetParity(const uint8_t *pbtCmd, uint16_t iLen, uint8_t *par) {
|
|
uint16_t paritybit_cnt = 0;
|
|
uint16_t paritybyte_cnt = 0;
|
|
uint8_t parityBits = 0;
|
|
|
|
for (uint16_t i = 0; i < iLen; i++) {
|
|
// Generate the parity bits
|
|
parityBits |= ((oddparity8(pbtCmd[i])) << (7-paritybit_cnt));
|
|
if (paritybit_cnt == 7) {
|
|
par[paritybyte_cnt] = parityBits; // save 8 Bits parity
|
|
parityBits = 0; // and advance to next Parity Byte
|
|
paritybyte_cnt++;
|
|
paritybit_cnt = 0;
|
|
} else {
|
|
paritybit_cnt++;
|
|
}
|
|
}
|
|
|
|
// save remaining parity bits
|
|
par[paritybyte_cnt] = parityBits;
|
|
}
|
|
|
|
|
|
//=============================================================================
|
|
// ISO 14443 Type A - Miller decoder
|
|
//=============================================================================
|
|
// Basics:
|
|
// This decoder is used when the PM3 acts as a tag.
|
|
// The reader will generate "pauses" by temporarily switching of the field.
|
|
// At the PM3 antenna we will therefore measure a modulated antenna voltage.
|
|
// The FPGA does a comparison with a threshold and would deliver e.g.:
|
|
// ........ 1 1 1 1 1 1 0 0 1 1 1 1 1 1 1 1 1 1 0 0 1 1 1 1 1 1 1 1 1 1 .......
|
|
// The Miller decoder needs to identify the following sequences:
|
|
// 2 (or 3) ticks pause followed by 6 (or 5) ticks unmodulated: pause at beginning - Sequence Z ("start of communication" or a "0")
|
|
// 8 ticks without a modulation: no pause - Sequence Y (a "0" or "end of communication" or "no information")
|
|
// 4 ticks unmodulated followed by 2 (or 3) ticks pause: pause in second half - Sequence X (a "1")
|
|
// Note 1: the bitstream may start at any time. We therefore need to sync.
|
|
// Note 2: the interpretation of Sequence Y and Z depends on the preceding sequence.
|
|
//-----------------------------------------------------------------------------
|
|
static tUart Uart;
|
|
|
|
// Lookup-Table to decide if 4 raw bits are a modulation.
|
|
// We accept the following:
|
|
// 0001 - a 3 tick wide pause
|
|
// 0011 - a 2 tick wide pause, or a three tick wide pause shifted left
|
|
// 0111 - a 2 tick wide pause shifted left
|
|
// 1001 - a 2 tick wide pause shifted right
|
|
const bool Mod_Miller_LUT[] = {
|
|
false, true, false, true, false, false, false, true,
|
|
false, true, false, false, false, false, false, false
|
|
};
|
|
#define IsMillerModulationNibble1(b) (Mod_Miller_LUT[(b & 0x000000F0) >> 4])
|
|
#define IsMillerModulationNibble2(b) (Mod_Miller_LUT[(b & 0x0000000F)])
|
|
|
|
tUart* GetUart() {
|
|
return &Uart;
|
|
}
|
|
|
|
void UartReset(void) {
|
|
Uart.state = STATE_UNSYNCD;
|
|
Uart.bitCount = 0;
|
|
Uart.len = 0; // number of decoded data bytes
|
|
Uart.parityLen = 0; // number of decoded parity bytes
|
|
Uart.shiftReg = 0; // shiftreg to hold decoded data bits
|
|
Uart.parityBits = 0; // holds 8 parity bits
|
|
Uart.startTime = 0;
|
|
Uart.endTime = 0;
|
|
Uart.fourBits = 0x00000000; // clear the buffer for 4 Bits
|
|
Uart.posCnt = 0;
|
|
Uart.syncBit = 9999;
|
|
}
|
|
|
|
void UartInit(uint8_t *data, uint8_t *parity) {
|
|
Uart.output = data;
|
|
Uart.parity = parity;
|
|
UartReset();
|
|
}
|
|
|
|
// use parameter non_real_time to provide a timestamp. Set to 0 if the decoder should measure real time
|
|
RAMFUNC bool MillerDecoding(uint8_t bit, uint32_t non_real_time) {
|
|
Uart.fourBits = (Uart.fourBits << 8) | bit;
|
|
|
|
if (Uart.state == STATE_UNSYNCD) { // not yet synced
|
|
Uart.syncBit = 9999; // not set
|
|
|
|
// 00x11111 2|3 ticks pause followed by 6|5 ticks unmodulated Sequence Z (a "0" or "start of communication")
|
|
// 11111111 8 ticks unmodulation Sequence Y (a "0" or "end of communication" or "no information")
|
|
// 111100x1 4 ticks unmodulated followed by 2|3 ticks pause Sequence X (a "1")
|
|
|
|
// The start bit is one ore more Sequence Y followed by a Sequence Z (... 11111111 00x11111). We need to distinguish from
|
|
// Sequence X followed by Sequence Y followed by Sequence Z (111100x1 11111111 00x11111)
|
|
// we therefore look for a ...xx1111 11111111 00x11111xxxxxx... pattern
|
|
// (12 '1's followed by 2 '0's, eventually followed by another '0', followed by 5 '1's)
|
|
#define ISO14443A_STARTBIT_MASK 0x07FFEF80 // mask is 00000111 11111111 11101111 10000000
|
|
#define ISO14443A_STARTBIT_PATTERN 0x07FF8F80 // pattern is 00000111 11111111 10001111 10000000
|
|
if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 0)) == ISO14443A_STARTBIT_PATTERN >> 0) Uart.syncBit = 7;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 1)) == ISO14443A_STARTBIT_PATTERN >> 1) Uart.syncBit = 6;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 2)) == ISO14443A_STARTBIT_PATTERN >> 2) Uart.syncBit = 5;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 3)) == ISO14443A_STARTBIT_PATTERN >> 3) Uart.syncBit = 4;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 4)) == ISO14443A_STARTBIT_PATTERN >> 4) Uart.syncBit = 3;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 5)) == ISO14443A_STARTBIT_PATTERN >> 5) Uart.syncBit = 2;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 6)) == ISO14443A_STARTBIT_PATTERN >> 6) Uart.syncBit = 1;
|
|
else if ((Uart.fourBits & (ISO14443A_STARTBIT_MASK >> 7)) == ISO14443A_STARTBIT_PATTERN >> 7) Uart.syncBit = 0;
|
|
|
|
if (Uart.syncBit != 9999) { // found a sync bit
|
|
Uart.startTime = non_real_time ? non_real_time : (GetCountSspClk() & 0xfffffff8);
|
|
Uart.startTime -= Uart.syncBit;
|
|
Uart.endTime = Uart.startTime;
|
|
Uart.state = STATE_START_OF_COMMUNICATION;
|
|
}
|
|
} else {
|
|
|
|
if (IsMillerModulationNibble1(Uart.fourBits >> Uart.syncBit)) {
|
|
if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation in both halves - error
|
|
UartReset();
|
|
} else { // Modulation in first half = Sequence Z = logic "0"
|
|
if (Uart.state == STATE_MILLER_X) { // error - must not follow after X
|
|
UartReset();
|
|
} else {
|
|
Uart.bitCount++;
|
|
Uart.shiftReg = (Uart.shiftReg >> 1); // add a 0 to the shiftreg
|
|
Uart.state = STATE_MILLER_Z;
|
|
Uart.endTime = Uart.startTime + 8 * (9 * Uart.len + Uart.bitCount + 1) - 6;
|
|
if (Uart.bitCount >= 9) { // if we decoded a full byte (including parity)
|
|
Uart.output[Uart.len++] = (Uart.shiftReg & 0xff);
|
|
Uart.parityBits <<= 1; // make room for the parity bit
|
|
Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit
|
|
Uart.bitCount = 0;
|
|
Uart.shiftReg = 0;
|
|
if ((Uart.len & 0x0007) == 0) { // every 8 data bytes
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits
|
|
Uart.parityBits = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
if (IsMillerModulationNibble2(Uart.fourBits >> Uart.syncBit)) { // Modulation second half = Sequence X = logic "1"
|
|
Uart.bitCount++;
|
|
Uart.shiftReg = (Uart.shiftReg >> 1) | 0x100; // add a 1 to the shiftreg
|
|
Uart.state = STATE_MILLER_X;
|
|
Uart.endTime = Uart.startTime + 8 * (9 * Uart.len + Uart.bitCount + 1) - 2;
|
|
if (Uart.bitCount >= 9) { // if we decoded a full byte (including parity)
|
|
Uart.output[Uart.len++] = (Uart.shiftReg & 0xff);
|
|
Uart.parityBits <<= 1; // make room for the new parity bit
|
|
Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit
|
|
Uart.bitCount = 0;
|
|
Uart.shiftReg = 0;
|
|
if ((Uart.len & 0x0007) == 0) { // every 8 data bytes
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits
|
|
Uart.parityBits = 0;
|
|
}
|
|
}
|
|
} else { // no modulation in both halves - Sequence Y
|
|
if (Uart.state == STATE_MILLER_Z || Uart.state == STATE_MILLER_Y) { // Y after logic "0" - End of Communication
|
|
Uart.state = STATE_UNSYNCD;
|
|
Uart.bitCount--; // last "0" was part of EOC sequence
|
|
Uart.shiftReg <<= 1; // drop it
|
|
if (Uart.bitCount > 0) { // if we decoded some bits
|
|
Uart.shiftReg >>= (9 - Uart.bitCount); // right align them
|
|
Uart.output[Uart.len++] = (Uart.shiftReg & 0xff); // add last byte to the output
|
|
Uart.parityBits <<= 1; // add a (void) parity bit
|
|
Uart.parityBits <<= (8 - (Uart.len&0x0007)); // left align parity bits
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store it
|
|
return true;
|
|
} else if (Uart.len & 0x0007) { // there are some parity bits to store
|
|
Uart.parityBits <<= (8 - (Uart.len&0x0007)); // left align remaining parity bits
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // and store them
|
|
}
|
|
if (Uart.len) {
|
|
return true; // we are finished with decoding the raw data sequence
|
|
} else {
|
|
UartReset(); // Nothing received - start over
|
|
}
|
|
}
|
|
if (Uart.state == STATE_START_OF_COMMUNICATION) { // error - must not follow directly after SOC
|
|
UartReset();
|
|
} else { // a logic "0"
|
|
Uart.bitCount++;
|
|
Uart.shiftReg = (Uart.shiftReg >> 1); // add a 0 to the shiftreg
|
|
Uart.state = STATE_MILLER_Y;
|
|
if (Uart.bitCount >= 9) { // if we decoded a full byte (including parity)
|
|
Uart.output[Uart.len++] = (Uart.shiftReg & 0xff);
|
|
Uart.parityBits <<= 1; // make room for the parity bit
|
|
Uart.parityBits |= ((Uart.shiftReg >> 8) & 0x01); // store parity bit
|
|
Uart.bitCount = 0;
|
|
Uart.shiftReg = 0;
|
|
if ((Uart.len & 0x0007) == 0) { // every 8 data bytes
|
|
Uart.parity[Uart.parityLen++] = Uart.parityBits; // store 8 parity bits
|
|
Uart.parityBits = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return false; // not finished yet, need more data
|
|
}
|
|
|
|
//=============================================================================
|
|
// ISO 14443 Type A - Manchester decoder
|
|
//=============================================================================
|
|
// Basics:
|
|
// This decoder is used when the PM3 acts as a reader.
|
|
// The tag will modulate the reader field by asserting different loads to it. As a consequence, the voltage
|
|
// at the reader antenna will be modulated as well. The FPGA detects the modulation for us and would deliver e.g. the following:
|
|
// ........ 0 0 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 .......
|
|
// The Manchester decoder needs to identify the following sequences:
|
|
// 4 ticks modulated followed by 4 ticks unmodulated: Sequence D = 1 (also used as "start of communication")
|
|
// 4 ticks unmodulated followed by 4 ticks modulated: Sequence E = 0
|
|
// 8 ticks unmodulated: Sequence F = end of communication
|
|
// 8 ticks modulated: A collision. Save the collision position and treat as Sequence D
|
|
// Note 1: the bitstream may start at any time. We therefore need to sync.
|
|
// Note 2: parameter offset is used to determine the position of the parity bits (required for the anticollision command only)
|
|
tDemod Demod;
|
|
|
|
// Lookup-Table to decide if 4 raw bits are a modulation.
|
|
// We accept three or four "1" in any position
|
|
const bool Mod_Manchester_LUT[] = {
|
|
false, false, false, false, false, false, false, true,
|
|
false, false, false, true, false, true, true, true
|
|
};
|
|
|
|
#define IsManchesterModulationNibble1(b) (Mod_Manchester_LUT[(b & 0x00F0) >> 4])
|
|
#define IsManchesterModulationNibble2(b) (Mod_Manchester_LUT[(b & 0x000F)])
|
|
|
|
tDemod* GetDemod() {
|
|
return &Demod;
|
|
}
|
|
void DemodReset(void) {
|
|
Demod.state = DEMOD_UNSYNCD;
|
|
Demod.len = 0; // number of decoded data bytes
|
|
Demod.parityLen = 0;
|
|
Demod.shiftReg = 0; // shiftreg to hold decoded data bits
|
|
Demod.parityBits = 0; //
|
|
Demod.collisionPos = 0; // Position of collision bit
|
|
Demod.twoBits = 0xFFFF; // buffer for 2 Bits
|
|
Demod.highCnt = 0;
|
|
Demod.startTime = 0;
|
|
Demod.endTime = 0;
|
|
Demod.bitCount = 0;
|
|
Demod.syncBit = 0xFFFF;
|
|
Demod.samples = 0;
|
|
}
|
|
|
|
void DemodInit(uint8_t *data, uint8_t *parity) {
|
|
Demod.output = data;
|
|
Demod.parity = parity;
|
|
DemodReset();
|
|
}
|
|
|
|
// use parameter non_real_time to provide a timestamp. Set to 0 if the decoder should measure real time
|
|
RAMFUNC int ManchesterDecoding(uint8_t bit, uint16_t offset, uint32_t non_real_time) {
|
|
Demod.twoBits = (Demod.twoBits << 8) | bit;
|
|
|
|
if (Demod.state == DEMOD_UNSYNCD) {
|
|
|
|
if (Demod.highCnt < 2) { // wait for a stable unmodulated signal
|
|
if (Demod.twoBits == 0x0000) {
|
|
Demod.highCnt++;
|
|
} else {
|
|
Demod.highCnt = 0;
|
|
}
|
|
} else {
|
|
Demod.syncBit = 0xFFFF; // not set
|
|
if ((Demod.twoBits & 0x7700) == 0x7000) Demod.syncBit = 7;
|
|
else if ((Demod.twoBits & 0x3B80) == 0x3800) Demod.syncBit = 6;
|
|
else if ((Demod.twoBits & 0x1DC0) == 0x1C00) Demod.syncBit = 5;
|
|
else if ((Demod.twoBits & 0x0EE0) == 0x0E00) Demod.syncBit = 4;
|
|
else if ((Demod.twoBits & 0x0770) == 0x0700) Demod.syncBit = 3;
|
|
else if ((Demod.twoBits & 0x03B8) == 0x0380) Demod.syncBit = 2;
|
|
else if ((Demod.twoBits & 0x01DC) == 0x01C0) Demod.syncBit = 1;
|
|
else if ((Demod.twoBits & 0x00EE) == 0x00E0) Demod.syncBit = 0;
|
|
if (Demod.syncBit != 0xFFFF) {
|
|
Demod.startTime = non_real_time ? non_real_time : (GetCountSspClk() & 0xfffffff8);
|
|
Demod.startTime -= Demod.syncBit;
|
|
Demod.bitCount = offset; // number of decoded data bits
|
|
Demod.state = DEMOD_MANCHESTER_DATA;
|
|
}
|
|
}
|
|
} else {
|
|
|
|
if (IsManchesterModulationNibble1(Demod.twoBits >> Demod.syncBit)) { // modulation in first half
|
|
if (IsManchesterModulationNibble2(Demod.twoBits >> Demod.syncBit)) { // ... and in second half = collision
|
|
if (!Demod.collisionPos) {
|
|
Demod.collisionPos = (Demod.len << 3) + Demod.bitCount;
|
|
}
|
|
} // modulation in first half only - Sequence D = 1
|
|
Demod.bitCount++;
|
|
Demod.shiftReg = (Demod.shiftReg >> 1) | 0x100; // in both cases, add a 1 to the shiftreg
|
|
if (Demod.bitCount == 9) { // if we decoded a full byte (including parity)
|
|
Demod.output[Demod.len++] = (Demod.shiftReg & 0xff);
|
|
Demod.parityBits <<= 1; // make room for the parity bit
|
|
Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
|
|
Demod.bitCount = 0;
|
|
Demod.shiftReg = 0;
|
|
if ((Demod.len & 0x0007) == 0) { // every 8 data bytes
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // store 8 parity bits
|
|
Demod.parityBits = 0;
|
|
}
|
|
}
|
|
Demod.endTime = Demod.startTime + 8 * (9 * Demod.len + Demod.bitCount + 1) - 4;
|
|
} else { // no modulation in first half
|
|
if (IsManchesterModulationNibble2(Demod.twoBits >> Demod.syncBit)) { // and modulation in second half = Sequence E = 0
|
|
Demod.bitCount++;
|
|
Demod.shiftReg = (Demod.shiftReg >> 1); // add a 0 to the shiftreg
|
|
if (Demod.bitCount >= 9) { // if we decoded a full byte (including parity)
|
|
Demod.output[Demod.len++] = (Demod.shiftReg & 0xff);
|
|
Demod.parityBits <<= 1; // make room for the new parity bit
|
|
Demod.parityBits |= ((Demod.shiftReg >> 8) & 0x01); // store parity bit
|
|
Demod.bitCount = 0;
|
|
Demod.shiftReg = 0;
|
|
if ((Demod.len & 0x0007) == 0) { // every 8 data bytes
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // store 8 parity bits1
|
|
Demod.parityBits = 0;
|
|
}
|
|
}
|
|
Demod.endTime = Demod.startTime + 8 * (9 * Demod.len + Demod.bitCount + 1);
|
|
} else { // no modulation in both halves - End of communication
|
|
if(Demod.bitCount > 0) { // there are some remaining data bits
|
|
Demod.shiftReg >>= (9 - Demod.bitCount); // right align the decoded bits
|
|
Demod.output[Demod.len++] = Demod.shiftReg & 0xff; // and add them to the output
|
|
Demod.parityBits <<= 1; // add a (void) parity bit
|
|
Demod.parityBits <<= (8 - (Demod.len&0x0007)); // left align remaining parity bits
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
|
|
return true;
|
|
} else if (Demod.len & 0x0007) { // there are some parity bits to store
|
|
Demod.parityBits <<= (8 - (Demod.len&0x0007)); // left align remaining parity bits
|
|
Demod.parity[Demod.parityLen++] = Demod.parityBits; // and store them
|
|
}
|
|
if (Demod.len) {
|
|
return true; // we are finished with decoding the raw data sequence
|
|
} else { // nothing received. Start over
|
|
DemodReset();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return false; // not finished yet, need more data
|
|
}
|
|
|
|
//=============================================================================
|
|
// Finally, a `sniffer' for ISO 14443 Type A
|
|
// Both sides of communication!
|
|
//=============================================================================
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Record the sequence of commands sent by the reader to the tag, with
|
|
// triggering so that we start recording at the point that the tag is moved
|
|
// near the reader.
|
|
// "hf 14a sniff"
|
|
//-----------------------------------------------------------------------------
|
|
void RAMFUNC SniffIso14443a(uint8_t param) {
|
|
LEDsoff();
|
|
// param:
|
|
// bit 0 - trigger from first card answer
|
|
// bit 1 - trigger from first reader 7-bit request
|
|
iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
|
|
|
|
// Allocate memory from BigBuf for some buffers
|
|
// free all previous allocations first
|
|
BigBuf_free(); BigBuf_Clear_ext(false);
|
|
clear_trace();
|
|
set_tracing(true);
|
|
|
|
// The command (reader -> tag) that we're receiving.
|
|
uint8_t *receivedCmd = BigBuf_malloc(MAX_FRAME_SIZE);
|
|
uint8_t *receivedCmdPar = BigBuf_malloc(MAX_PARITY_SIZE);
|
|
|
|
// The response (tag -> reader) that we're receiving.
|
|
uint8_t *receivedResp = BigBuf_malloc(MAX_FRAME_SIZE);
|
|
uint8_t *receivedRespPar = BigBuf_malloc(MAX_PARITY_SIZE);
|
|
|
|
// The DMA buffer, used to stream samples from the FPGA
|
|
uint8_t *dmaBuf = BigBuf_malloc(DMA_BUFFER_SIZE);
|
|
uint8_t *data = dmaBuf;
|
|
|
|
uint8_t previous_data = 0;
|
|
int maxDataLen = 0;
|
|
int dataLen = 0;
|
|
bool TagIsActive = false;
|
|
bool ReaderIsActive = false;
|
|
|
|
// Set up the demodulator for tag -> reader responses.
|
|
DemodInit(receivedResp, receivedRespPar);
|
|
|
|
// Set up the demodulator for the reader -> tag commands
|
|
UartInit(receivedCmd, receivedCmdPar);
|
|
|
|
// Setup and start DMA.
|
|
if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, DMA_BUFFER_SIZE) ){
|
|
if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting");
|
|
return;
|
|
}
|
|
|
|
// We won't start recording the frames that we acquire until we trigger;
|
|
// a good trigger condition to get started is probably when we see a
|
|
// response from the tag.
|
|
// triggered == false -- to wait first for card
|
|
bool triggered = !(param & 0x03);
|
|
|
|
uint32_t rsamples = 0;
|
|
|
|
DbpString("Starting to sniff");
|
|
|
|
// loop and listen
|
|
while (!BUTTON_PRESS()) {
|
|
WDT_HIT();
|
|
LED_A_ON();
|
|
|
|
int register readBufDataP = data - dmaBuf;
|
|
int register dmaBufDataP = DMA_BUFFER_SIZE - AT91C_BASE_PDC_SSC->PDC_RCR;
|
|
if (readBufDataP <= dmaBufDataP)
|
|
dataLen = dmaBufDataP - readBufDataP;
|
|
else
|
|
dataLen = DMA_BUFFER_SIZE - readBufDataP + dmaBufDataP;
|
|
|
|
// test for length of buffer
|
|
if (dataLen > maxDataLen) {
|
|
maxDataLen = dataLen;
|
|
if (dataLen > (9 * DMA_BUFFER_SIZE / 10)) {
|
|
Dbprintf("[!] blew circular buffer! | datalen %u", dataLen);
|
|
break;
|
|
}
|
|
}
|
|
if (dataLen < 1) continue;
|
|
|
|
// primary buffer was stopped( <-- we lost data!
|
|
if (!AT91C_BASE_PDC_SSC->PDC_RCR) {
|
|
AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) dmaBuf;
|
|
AT91C_BASE_PDC_SSC->PDC_RCR = DMA_BUFFER_SIZE;
|
|
Dbprintf("[-] RxEmpty ERROR | data length %d", dataLen); // temporary
|
|
}
|
|
// secondary buffer sets as primary, secondary buffer was stopped
|
|
if (!AT91C_BASE_PDC_SSC->PDC_RNCR) {
|
|
AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) dmaBuf;
|
|
AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE;
|
|
}
|
|
|
|
LED_A_OFF();
|
|
|
|
// Need two samples to feed Miller and Manchester-Decoder
|
|
if (rsamples & 0x01) {
|
|
|
|
if (!TagIsActive) { // no need to try decoding reader data if the tag is sending
|
|
uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4);
|
|
if (MillerDecoding(readerdata, (rsamples-1)*4)) {
|
|
LED_C_ON();
|
|
|
|
// check - if there is a short 7bit request from reader
|
|
if ((!triggered) && (param & 0x02) && (Uart.len == 1) && (Uart.bitCount == 7)) triggered = true;
|
|
|
|
if (triggered) {
|
|
if (!LogTrace(receivedCmd,
|
|
Uart.len,
|
|
Uart.startTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER,
|
|
Uart.endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER,
|
|
Uart.parity,
|
|
true)) break;
|
|
}
|
|
/* ready to receive another command. */
|
|
UartReset();
|
|
/* reset the demod code, which might have been */
|
|
/* false-triggered by the commands from the reader. */
|
|
DemodReset();
|
|
LED_B_OFF();
|
|
}
|
|
ReaderIsActive = (Uart.state != STATE_UNSYNCD);
|
|
}
|
|
|
|
// no need to try decoding tag data if the reader is sending - and we cannot afford the time
|
|
if (!ReaderIsActive) {
|
|
uint8_t tagdata = (previous_data << 4) | (*data & 0x0F);
|
|
if (ManchesterDecoding(tagdata, 0, (rsamples-1)*4)) {
|
|
LED_B_ON();
|
|
|
|
if (!LogTrace(receivedResp,
|
|
Demod.len,
|
|
Demod.startTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER,
|
|
Demod.endTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER,
|
|
Demod.parity,
|
|
false)) break;
|
|
|
|
if ((!triggered) && (param & 0x01)) triggered = true;
|
|
|
|
// ready to receive another response.
|
|
DemodReset();
|
|
// reset the Miller decoder including its (now outdated) input buffer
|
|
UartReset();
|
|
//UartInit(receivedCmd, receivedCmdPar);
|
|
LED_C_OFF();
|
|
}
|
|
TagIsActive = (Demod.state != DEMOD_UNSYNCD);
|
|
}
|
|
}
|
|
|
|
previous_data = *data;
|
|
rsamples++;
|
|
data++;
|
|
if (data == dmaBuf + DMA_BUFFER_SIZE) {
|
|
data = dmaBuf;
|
|
}
|
|
} // end main loop
|
|
|
|
if (MF_DBGLEVEL >= 1) {
|
|
Dbprintf("maxDataLen=%d, Uart.state=%x, Uart.len=%d", maxDataLen, Uart.state, Uart.len);
|
|
Dbprintf("traceLen=%d, Uart.output[0]=%08x", BigBuf_get_traceLen(), (uint32_t)Uart.output[0]);
|
|
}
|
|
switch_off();
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Prepare tag messages
|
|
//-----------------------------------------------------------------------------
|
|
static void CodeIso14443aAsTagPar(const uint8_t *cmd, uint16_t len, uint8_t *parity, bool collision) {
|
|
|
|
//uint8_t localCol = 0;
|
|
ToSendReset();
|
|
|
|
// Correction bit, might be removed when not needed
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(1); // <-----
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
|
|
// Send startbit
|
|
ToSend[++ToSendMax] = SEC_D;
|
|
LastProxToAirDuration = 8 * ToSendMax - 4;
|
|
|
|
for(uint16_t i = 0; i < len; i++) {
|
|
uint8_t b = cmd[i];
|
|
|
|
// Data bits
|
|
for(uint16_t j = 0; j < 8; j++) {
|
|
//if (collision && (localCol >= colpos)){
|
|
if (collision) {
|
|
ToSend[++ToSendMax] = SEC_COLL;
|
|
//localCol++;
|
|
} else {
|
|
if (b & 1) {
|
|
ToSend[++ToSendMax] = SEC_D;
|
|
} else {
|
|
ToSend[++ToSendMax] = SEC_E;
|
|
}
|
|
b >>= 1;
|
|
}
|
|
}
|
|
|
|
if (collision) {
|
|
ToSend[++ToSendMax] = SEC_COLL;
|
|
LastProxToAirDuration = 8 * ToSendMax;
|
|
} else {
|
|
// Get the parity bit
|
|
if (parity[i>>3] & (0x80>>(i&0x0007))) {
|
|
ToSend[++ToSendMax] = SEC_D;
|
|
LastProxToAirDuration = 8 * ToSendMax - 4;
|
|
} else {
|
|
ToSend[++ToSendMax] = SEC_E;
|
|
LastProxToAirDuration = 8 * ToSendMax;
|
|
}
|
|
}
|
|
}
|
|
|
|
// Send stopbit
|
|
ToSend[++ToSendMax] = SEC_F;
|
|
|
|
// Convert from last byte pos to length
|
|
ToSendMax++;
|
|
}
|
|
|
|
static void CodeIso14443aAsTagEx(const uint8_t *cmd, uint16_t len, bool collision) {
|
|
uint8_t par[MAX_PARITY_SIZE] = {0};
|
|
GetParity(cmd, len, par);
|
|
CodeIso14443aAsTagPar(cmd, len, par, collision);
|
|
}
|
|
static void CodeIso14443aAsTag(const uint8_t *cmd, uint16_t len) {
|
|
CodeIso14443aAsTagEx(cmd, len, false);
|
|
}
|
|
|
|
static void Code4bitAnswerAsTag(uint8_t cmd) {
|
|
uint8_t b = cmd;
|
|
|
|
ToSendReset();
|
|
|
|
// Correction bit, might be removed when not needed
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(1); // 1
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
ToSendStuffBit(0);
|
|
|
|
// Send startbit
|
|
ToSend[++ToSendMax] = SEC_D;
|
|
|
|
for(uint8_t i = 0; i < 4; i++) {
|
|
if(b & 1) {
|
|
ToSend[++ToSendMax] = SEC_D;
|
|
LastProxToAirDuration = 8 * ToSendMax - 4;
|
|
} else {
|
|
ToSend[++ToSendMax] = SEC_E;
|
|
LastProxToAirDuration = 8 * ToSendMax;
|
|
}
|
|
b >>= 1;
|
|
}
|
|
|
|
// Send stopbit
|
|
ToSend[++ToSendMax] = SEC_F;
|
|
|
|
// Convert from last byte pos to length
|
|
ToSendMax++;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Wait for commands from reader
|
|
// stop when button is pressed
|
|
// or return TRUE when command is captured
|
|
//-----------------------------------------------------------------------------
|
|
int GetIso14443aCommandFromReader(uint8_t *received, uint8_t *parity, int *len) {
|
|
// Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen
|
|
// only, since we are receiving, not transmitting).
|
|
// Signal field is off with the appropriate LED
|
|
LED_D_OFF();
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
// Now run a `software UART` on the stream of incoming samples.
|
|
UartInit(received, parity);
|
|
|
|
// clear RXRDY:
|
|
uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
|
|
|
|
while (!BUTTON_PRESS()) {
|
|
WDT_HIT();
|
|
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
|
b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
|
|
if (MillerDecoding(b, 0)) {
|
|
*len = Uart.len;
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool prepare_tag_modulation(tag_response_info_t* response_info, size_t max_buffer_size) {
|
|
// Example response, answer to MIFARE Classic read block will be 16 bytes + 2 CRC = 18 bytes
|
|
// This will need the following byte array for a modulation sequence
|
|
// 144 data bits (18 * 8)
|
|
// 18 parity bits
|
|
// 2 Start and stop
|
|
// 1 Correction bit (Answer in 1172 or 1236 periods, see FPGA)
|
|
// 1 just for the case
|
|
// ----------- +
|
|
// 166 bytes, since every bit that needs to be send costs us a byte
|
|
//
|
|
// Prepare the tag modulation bits from the message
|
|
CodeIso14443aAsTag(response_info->response,response_info->response_n);
|
|
|
|
// Make sure we do not exceed the free buffer space
|
|
if (ToSendMax > max_buffer_size) {
|
|
Dbprintf("Out of memory, when modulating bits for tag answer:");
|
|
Dbhexdump(response_info->response_n, response_info->response, false);
|
|
return false;
|
|
}
|
|
|
|
// Copy the byte array, used for this modulation to the buffer position
|
|
memcpy(response_info->modulation, ToSend, ToSendMax);
|
|
|
|
// Store the number of bytes that were used for encoding/modulation and the time needed to transfer them
|
|
response_info->modulation_n = ToSendMax;
|
|
response_info->ProxToAirDuration = LastProxToAirDuration;
|
|
return true;
|
|
}
|
|
|
|
// "precompile" responses. There are 7 predefined responses with a total of 28 bytes data to transmit.
|
|
// Coded responses need one byte per bit to transfer (data, parity, start, stop, correction)
|
|
// 28 * 8 data bits, 28 * 1 parity bits, 7 start bits, 7 stop bits, 7 correction bits
|
|
// -> need 273 bytes buffer
|
|
// 44 * 8 data bits, 44 * 1 parity bits, 9 start bits, 9 stop bits, 9 correction bits --370
|
|
// 47 * 8 data bits, 47 * 1 parity bits, 10 start bits, 10 stop bits, 10 correction bits
|
|
#define ALLOCATED_TAG_MODULATION_BUFFER_SIZE 453
|
|
|
|
bool prepare_allocated_tag_modulation(tag_response_info_t* response_info) {
|
|
// Retrieve and store the current buffer index
|
|
response_info->modulation = free_buffer_pointer;
|
|
|
|
// Determine the maximum size we can use from our buffer
|
|
size_t max_buffer_size = ALLOCATED_TAG_MODULATION_BUFFER_SIZE;
|
|
|
|
// Forward the prepare tag modulation function to the inner function
|
|
if (prepare_tag_modulation(response_info, max_buffer_size)) {
|
|
// Update the free buffer offset
|
|
free_buffer_pointer += ToSendMax;
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Main loop of simulated tag: receive commands from reader, decide what
|
|
// response to send, and send it.
|
|
// 'hf 14a sim'
|
|
//-----------------------------------------------------------------------------
|
|
void SimulateIso14443aTag(int tagType, int flags, uint8_t* data) {
|
|
|
|
#define ATTACK_KEY_COUNT 8 // keep same as define in cmdhfmf.c -> readerAttack()
|
|
|
|
uint8_t sak = 0;
|
|
uint32_t cuid = 0;
|
|
uint32_t nonce = 0;
|
|
|
|
// PACK response to PWD AUTH for EV1/NTAG
|
|
uint8_t response8[4] = {0,0,0,0};
|
|
// Counter for EV1/NTAG
|
|
uint32_t counters[] = {0,0,0};
|
|
|
|
// The first response contains the ATQA (note: bytes are transmitted in reverse order).
|
|
uint8_t response1[] = {0,0};
|
|
|
|
// Here, we collect CUID, block1, keytype1, NT1, NR1, AR1, CUID, block2, keytyp2, NT2, NR2, AR2
|
|
// it should also collect block, keytype.
|
|
uint8_t cardAUTHSC = 0;
|
|
uint8_t cardAUTHKEY = 0xff; // no authentication
|
|
// allow collecting up to 8 sets of nonces to allow recovery of up to 8 keys
|
|
|
|
nonces_t ar_nr_nonces[ATTACK_KEY_COUNT]; // for attack types moebius
|
|
memset(ar_nr_nonces, 0x00, sizeof(ar_nr_nonces));
|
|
uint8_t moebius_count = 0;
|
|
|
|
switch (tagType) {
|
|
case 1: { // MIFARE Classic 1k
|
|
response1[0] = 0x04;
|
|
sak = 0x08;
|
|
} break;
|
|
case 2: { // MIFARE Ultralight
|
|
response1[0] = 0x44;
|
|
sak = 0x00;
|
|
} break;
|
|
case 3: { // MIFARE DESFire
|
|
response1[0] = 0x04;
|
|
response1[1] = 0x03;
|
|
sak = 0x20;
|
|
} break;
|
|
case 4: { // ISO/IEC 14443-4 - javacard (JCOP)
|
|
response1[0] = 0x04;
|
|
sak = 0x28;
|
|
} break;
|
|
case 5: { // MIFARE TNP3XXX
|
|
response1[0] = 0x01;
|
|
response1[1] = 0x0f;
|
|
sak = 0x01;
|
|
} break;
|
|
case 6: { // MIFARE Mini 320b
|
|
response1[0] = 0x44;
|
|
sak = 0x09;
|
|
} break;
|
|
case 7: { // NTAG
|
|
response1[0] = 0x44;
|
|
sak = 0x00;
|
|
// PACK
|
|
response8[0] = 0x80;
|
|
response8[1] = 0x80;
|
|
compute_crc(CRC_14443_A, response8, 2, &response8[2], &response8[3]);
|
|
// uid not supplied then get from emulator memory
|
|
if (data[0]==0) {
|
|
uint16_t start = 4 * (0+12);
|
|
uint8_t emdata[8];
|
|
emlGetMemBt( emdata, start, sizeof(emdata));
|
|
memcpy(data, emdata, 3); // uid bytes 0-2
|
|
memcpy(data+3, emdata+4, 4); // uid bytes 3-7
|
|
flags |= FLAG_7B_UID_IN_DATA;
|
|
}
|
|
} break;
|
|
case 8: { // MIFARE Classic 4k
|
|
response1[0] = 0x02;
|
|
sak = 0x18;
|
|
} break;
|
|
case 9 : { // FM11RF005SH (Shanghai Metro)
|
|
response1[0] = 0x03;
|
|
response1[1] = 0x00;
|
|
sak = 0x0A;
|
|
}
|
|
default: {
|
|
Dbprintf("Error: unkown tagtype (%d)",tagType);
|
|
return;
|
|
} break;
|
|
}
|
|
|
|
// The second response contains the (mandatory) first 24 bits of the UID
|
|
uint8_t response2[5] = {0x00};
|
|
|
|
// For UID size 7,
|
|
uint8_t response2a[5] = {0x00};
|
|
|
|
if ( (flags & FLAG_7B_UID_IN_DATA) == FLAG_7B_UID_IN_DATA ) {
|
|
response2[0] = 0x88; // Cascade Tag marker
|
|
response2[1] = data[0];
|
|
response2[2] = data[1];
|
|
response2[3] = data[2];
|
|
|
|
response2a[0] = data[3];
|
|
response2a[1] = data[4];
|
|
response2a[2] = data[5];
|
|
response2a[3] = data[6]; //??
|
|
response2a[4] = response2a[0] ^ response2a[1] ^ response2a[2] ^ response2a[3];
|
|
|
|
// Configure the ATQA and SAK accordingly
|
|
response1[0] |= 0x40;
|
|
sak |= 0x04;
|
|
|
|
cuid = bytes_to_num(data+3, 4);
|
|
} else {
|
|
memcpy(response2, data, 4);
|
|
// Configure the ATQA and SAK accordingly
|
|
response1[0] &= 0xBF;
|
|
sak &= 0xFB;
|
|
cuid = bytes_to_num(data, 4);
|
|
}
|
|
|
|
// Calculate the BitCountCheck (BCC) for the first 4 bytes of the UID.
|
|
response2[4] = response2[0] ^ response2[1] ^ response2[2] ^ response2[3];
|
|
|
|
// Prepare the mandatory SAK (for 4 and 7 byte UID)
|
|
uint8_t response3[3] = {sak, 0x00, 0x00};
|
|
compute_crc(CRC_14443_A, response3, 1, &response3[1], &response3[2]);
|
|
|
|
// Prepare the optional second SAK (for 7 byte UID), drop the cascade bit
|
|
uint8_t response3a[3] = {0x00};
|
|
response3a[0] = sak & 0xFB;
|
|
compute_crc(CRC_14443_A, response3a, 1, &response3a[1], &response3a[2]);
|
|
|
|
// Tag NONCE.
|
|
uint8_t response5[4];
|
|
|
|
uint8_t response6[] = { 0x04, 0x58, 0x80, 0x02, 0x00, 0x00 }; // dummy ATS (pseudo-ATR), answer to RATS:
|
|
|
|
// Format byte = 0x58: FSCI=0x08 (FSC=256), TA(1) and TC(1) present,
|
|
// TA(1) = 0x80: different divisors not supported, DR = 1, DS = 1
|
|
// TB(1) = not present. Defaults: FWI = 4 (FWT = 256 * 16 * 2^4 * 1/fc = 4833us), SFGI = 0 (SFG = 256 * 16 * 2^0 * 1/fc = 302us)
|
|
// TC(1) = 0x02: CID supported, NAD not supported
|
|
compute_crc(CRC_14443_A, response6, 4, &response6[4], &response6[5]);
|
|
|
|
// Prepare GET_VERSION (different for UL EV-1 / NTAG)
|
|
// uint8_t response7_EV1[] = {0x00, 0x04, 0x03, 0x01, 0x01, 0x00, 0x0b, 0x03, 0xfd, 0xf7}; //EV1 48bytes VERSION.
|
|
// uint8_t response7_NTAG[] = {0x00, 0x04, 0x04, 0x02, 0x01, 0x00, 0x11, 0x03, 0x01, 0x9e}; //NTAG 215
|
|
// Prepare CHK_TEARING
|
|
// uint8_t response9[] = {0xBD,0x90,0x3f};
|
|
|
|
#define TAG_RESPONSE_COUNT 10
|
|
tag_response_info_t responses[TAG_RESPONSE_COUNT] = {
|
|
{ .response = response1, .response_n = sizeof(response1) }, // Answer to request - respond with card type
|
|
{ .response = response2, .response_n = sizeof(response2) }, // Anticollision cascade1 - respond with uid
|
|
{ .response = response2a, .response_n = sizeof(response2a) }, // Anticollision cascade2 - respond with 2nd half of uid if asked
|
|
{ .response = response3, .response_n = sizeof(response3) }, // Acknowledge select - cascade 1
|
|
{ .response = response3a, .response_n = sizeof(response3a) }, // Acknowledge select - cascade 2
|
|
{ .response = response5, .response_n = sizeof(response5) }, // Authentication answer (random nonce)
|
|
{ .response = response6, .response_n = sizeof(response6) }, // dummy ATS (pseudo-ATR), answer to RATS
|
|
|
|
{ .response = response8, .response_n = sizeof(response8) } // EV1/NTAG PACK response
|
|
};
|
|
// { .response = response7_NTAG, .response_n = sizeof(response7_NTAG)}, // EV1/NTAG GET_VERSION response
|
|
// { .response = response9, .response_n = sizeof(response9) } // EV1/NTAG CHK_TEAR response
|
|
|
|
|
|
// Allocate 512 bytes for the dynamic modulation, created when the reader queries for it
|
|
// Such a response is less time critical, so we can prepare them on the fly
|
|
#define DYNAMIC_RESPONSE_BUFFER_SIZE 64
|
|
#define DYNAMIC_MODULATION_BUFFER_SIZE 512
|
|
uint8_t dynamic_response_buffer[DYNAMIC_RESPONSE_BUFFER_SIZE];
|
|
uint8_t dynamic_modulation_buffer[DYNAMIC_MODULATION_BUFFER_SIZE];
|
|
tag_response_info_t dynamic_response_info = {
|
|
.response = dynamic_response_buffer,
|
|
.response_n = 0,
|
|
.modulation = dynamic_modulation_buffer,
|
|
.modulation_n = 0
|
|
};
|
|
|
|
// We need to listen to the high-frequency, peak-detected path.
|
|
iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
BigBuf_free_keep_EM();
|
|
clear_trace();
|
|
set_tracing(true);
|
|
|
|
// allocate buffers:
|
|
uint8_t *receivedCmd = BigBuf_malloc(MAX_FRAME_SIZE);
|
|
uint8_t *receivedCmdPar = BigBuf_malloc(MAX_PARITY_SIZE);
|
|
free_buffer_pointer = BigBuf_malloc(ALLOCATED_TAG_MODULATION_BUFFER_SIZE);
|
|
|
|
// Prepare the responses of the anticollision phase
|
|
// there will be not enough time to do this at the moment the reader sends it REQA
|
|
for (size_t i=0; i<TAG_RESPONSE_COUNT; i++)
|
|
prepare_allocated_tag_modulation(&responses[i]);
|
|
|
|
int len = 0;
|
|
|
|
// To control where we are in the protocol
|
|
int order = 0;
|
|
int lastorder;
|
|
|
|
// Just to allow some checks
|
|
int happened = 0;
|
|
int happened2 = 0;
|
|
int cmdsRecvd = 0;
|
|
tag_response_info_t* p_response;
|
|
|
|
LED_A_ON();
|
|
for (;;) {
|
|
WDT_HIT();
|
|
|
|
// Clean receive command buffer
|
|
if (!GetIso14443aCommandFromReader(receivedCmd, receivedCmdPar, &len)) {
|
|
Dbprintf("Emulator stopped. Trace length: %d ", BigBuf_get_traceLen());
|
|
break;
|
|
}
|
|
p_response = NULL;
|
|
|
|
// Okay, look at the command now.
|
|
lastorder = order;
|
|
if (receivedCmd[0] == ISO14443A_CMD_REQA) { // Received a REQUEST
|
|
p_response = &responses[0]; order = 1;
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_WUPA) { // Received a WAKEUP
|
|
p_response = &responses[0]; order = 6;
|
|
} else if (receivedCmd[1] == 0x20 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT) { // Received request for UID (cascade 1)
|
|
p_response = &responses[1]; order = 2;
|
|
} else if (receivedCmd[1] == 0x20 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2) { // Received request for UID (cascade 2)
|
|
p_response = &responses[2]; order = 20;
|
|
} else if (receivedCmd[1] == 0x70 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT) { // Received a SELECT (cascade 1)
|
|
p_response = &responses[3]; order = 3;
|
|
} else if (receivedCmd[1] == 0x70 && receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2) { // Received a SELECT (cascade 2)
|
|
p_response = &responses[4]; order = 30;
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_READBLOCK) { // Received a (plain) READ
|
|
uint8_t block = receivedCmd[1];
|
|
// if Ultralight or NTAG (4 byte blocks)
|
|
if ( tagType == 7 || tagType == 2 ) {
|
|
// first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature]
|
|
uint16_t start = 4 * (block+12);
|
|
uint8_t emdata[MAX_MIFARE_FRAME_SIZE];
|
|
emlGetMemBt( emdata, start, 16);
|
|
AddCrc14A(emdata, 16);
|
|
EmSendCmd(emdata, sizeof(emdata));
|
|
// We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below
|
|
p_response = NULL;
|
|
} else if ( tagType == 9 && block == 1 ) {
|
|
// FM11005SH. 16blocks, 4bytes / block.
|
|
// block0 = 2byte Customer ID (CID), 2byte Manufacture ID (MID)
|
|
// block1 = 4byte UID.
|
|
p_response = &responses[1];
|
|
} else { // all other tags (16 byte block tags)
|
|
uint8_t emdata[MAX_MIFARE_FRAME_SIZE];
|
|
emlGetMemBt( emdata, block, 16);
|
|
AddCrc14A(emdata, 16);
|
|
EmSendCmd(emdata, sizeof(emdata));
|
|
// EmSendCmd(data+(4*receivedCmd[1]),16);
|
|
// Dbprintf("Read request from reader: %x %x",receivedCmd[0],receivedCmd[1]);
|
|
// We already responded, do not send anything with the EmSendCmd14443aRaw() that is called below
|
|
p_response = NULL;
|
|
}
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_FASTREAD) { // Received a FAST READ (ranged read)
|
|
uint8_t emdata[MAX_FRAME_SIZE];
|
|
// first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature]
|
|
int start = (receivedCmd[1]+12) * 4;
|
|
int len = (receivedCmd[2] - receivedCmd[1] + 1) * 4;
|
|
emlGetMemBt( emdata, start, len);
|
|
AddCrc14A(emdata, len);
|
|
EmSendCmd(emdata, len+2);
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_READSIG && tagType == 7) { // Received a READ SIGNATURE --
|
|
// first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature]
|
|
uint16_t start = 4 * 4;
|
|
uint8_t emdata[34];
|
|
emlGetMemBt( emdata, start, 32);
|
|
AddCrc14A(emdata, 32);
|
|
EmSendCmd(emdata, sizeof(emdata));
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_READ_CNT && tagType == 7) { // Received a READ COUNTER --
|
|
uint8_t index = receivedCmd[1];
|
|
if (index > 2) {
|
|
// send NACK 0x0 == invalid argument
|
|
uint8_t nack[] = {0x00};
|
|
EmSendCmd(nack,sizeof(nack));
|
|
} else {
|
|
uint8_t cmd[] = {0x00,0x00,0x00,0x14,0xa5};
|
|
num_to_bytes(counters[index], 3, cmd);
|
|
AddCrc14A(cmd, sizeof(cmd)-2);
|
|
EmSendCmd(cmd,sizeof(cmd));
|
|
}
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_INCR_CNT && tagType == 7) { // Received a INC COUNTER --
|
|
uint8_t index = receivedCmd[1];
|
|
if ( index > 2) {
|
|
// send NACK 0x0 == invalid argument
|
|
uint8_t nack[] = {0x00};
|
|
EmSendCmd(nack,sizeof(nack));
|
|
} else {
|
|
|
|
uint32_t val = bytes_to_num(receivedCmd+2,4);
|
|
|
|
// if new value + old value is bigger 24bits, fail
|
|
if ( val + counters[index] > 0xFFFFFF ) {
|
|
// send NACK 0x4 == counter overflow
|
|
uint8_t nack[] = {0x04};
|
|
EmSendCmd(nack,sizeof(nack));
|
|
} else {
|
|
counters[index] = val;
|
|
// send ACK
|
|
uint8_t ack[] = {0x0a};
|
|
EmSendCmd(ack,sizeof(ack));
|
|
}
|
|
}
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_CHECKTEAR && tagType == 7) { // Received a CHECK_TEARING_EVENT --
|
|
// first 12 blocks of emu are [getversion answer - check tearing - pack - 0x00 - signature]
|
|
uint8_t emdata[3];
|
|
uint8_t index = receivedCmd[1];
|
|
if ( index > 2) {
|
|
// send NACK 0x0 == invalid argument
|
|
uint8_t nack[] = {0x00};
|
|
EmSendCmd(nack,sizeof(nack));
|
|
} else {
|
|
emlGetMemBt( emdata, 10+index, 1);
|
|
AddCrc14A(emdata, sizeof(emdata)-2);
|
|
EmSendCmd(emdata, sizeof(emdata));
|
|
}
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_HALT) { // Received a HALT
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
p_response = NULL;
|
|
} else if (receivedCmd[0] == MIFARE_AUTH_KEYA || receivedCmd[0] == MIFARE_AUTH_KEYB) { // Received an authentication request
|
|
if ( tagType == 7 ) { // IF NTAG /EV1 0x60 == GET_VERSION, not a authentication request.
|
|
uint8_t emdata[10];
|
|
emlGetMemBt( emdata, 0, 8 );
|
|
AddCrc14A(emdata, sizeof(emdata)-2);
|
|
EmSendCmd(emdata, sizeof(emdata));
|
|
p_response = NULL;
|
|
} else {
|
|
|
|
cardAUTHKEY = receivedCmd[0] - 0x60;
|
|
cardAUTHSC = receivedCmd[1] / 4; // received block num
|
|
|
|
// incease nonce at AUTH requests. this is time consuming.
|
|
nonce = prng_successor( GetTickCount(), 32 );
|
|
//num_to_bytes(nonce, 4, response5);
|
|
num_to_bytes(nonce, 4, dynamic_response_info.response);
|
|
dynamic_response_info.response_n = 4;
|
|
|
|
//prepare_tag_modulation(&responses[5], DYNAMIC_MODULATION_BUFFER_SIZE);
|
|
prepare_tag_modulation(&dynamic_response_info, DYNAMIC_MODULATION_BUFFER_SIZE);
|
|
p_response = &dynamic_response_info;
|
|
//p_response = &responses[5];
|
|
order = 7;
|
|
}
|
|
} else if (receivedCmd[0] == ISO14443A_CMD_RATS) { // Received a RATS request
|
|
if (tagType == 1 || tagType == 2) { // RATS not supported
|
|
EmSend4bit(CARD_NACK_NA);
|
|
p_response = NULL;
|
|
} else {
|
|
p_response = &responses[6]; order = 70;
|
|
}
|
|
} else if (order == 7 && len == 8) { // Received {nr] and {ar} (part of authentication)
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
uint32_t nr = bytes_to_num(receivedCmd,4);
|
|
uint32_t ar = bytes_to_num(receivedCmd+4,4);
|
|
|
|
// Collect AR/NR per keytype & sector
|
|
if ( (flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK ) {
|
|
|
|
int8_t index = -1;
|
|
int8_t empty = -1;
|
|
for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) {
|
|
// find which index to use
|
|
if ( (cardAUTHSC == ar_nr_nonces[i].sector) && (cardAUTHKEY == ar_nr_nonces[i].keytype))
|
|
index = i;
|
|
|
|
// keep track of empty slots.
|
|
if ( ar_nr_nonces[i].state == EMPTY)
|
|
empty = i;
|
|
}
|
|
// if no empty slots. Choose first and overwrite.
|
|
if ( index == -1 ) {
|
|
if ( empty == -1 ) {
|
|
index = 0;
|
|
ar_nr_nonces[index].state = EMPTY;
|
|
} else {
|
|
index = empty;
|
|
}
|
|
}
|
|
|
|
switch(ar_nr_nonces[index].state) {
|
|
case EMPTY: {
|
|
// first nonce collect
|
|
ar_nr_nonces[index].cuid = cuid;
|
|
ar_nr_nonces[index].sector = cardAUTHSC;
|
|
ar_nr_nonces[index].keytype = cardAUTHKEY;
|
|
ar_nr_nonces[index].nonce = nonce;
|
|
ar_nr_nonces[index].nr = nr;
|
|
ar_nr_nonces[index].ar = ar;
|
|
ar_nr_nonces[index].state = FIRST;
|
|
break;
|
|
}
|
|
case FIRST : {
|
|
// second nonce collect
|
|
ar_nr_nonces[index].nonce2 = nonce;
|
|
ar_nr_nonces[index].nr2 = nr;
|
|
ar_nr_nonces[index].ar2 = ar;
|
|
ar_nr_nonces[index].state = SECOND;
|
|
|
|
// send to client
|
|
cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, 0, 0, &ar_nr_nonces[index], sizeof(nonces_t));
|
|
|
|
ar_nr_nonces[index].state = EMPTY;
|
|
ar_nr_nonces[index].sector = 0;
|
|
ar_nr_nonces[index].keytype = 0;
|
|
|
|
moebius_count++;
|
|
break;
|
|
}
|
|
default: break;
|
|
}
|
|
}
|
|
p_response = NULL;
|
|
|
|
} else if (receivedCmd[0] == MIFARE_ULC_AUTH_1 ) { // ULC authentication, or Desfire Authentication
|
|
} else if (receivedCmd[0] == MIFARE_ULEV1_AUTH) { // NTAG / EV-1 authentication
|
|
if ( tagType == 7 ) {
|
|
uint16_t start = 13; // first 4 blocks of emu are [getversion answer - check tearing - pack - 0x00]
|
|
uint8_t emdata[4];
|
|
emlGetMemBt( emdata, start, 2);
|
|
AddCrc14A(emdata, 2);
|
|
EmSendCmd(emdata, sizeof(emdata));
|
|
p_response = NULL;
|
|
uint32_t pwd = bytes_to_num(receivedCmd+1,4);
|
|
|
|
if ( MF_DBGLEVEL >= 3) Dbprintf("Auth attempt: %08x", pwd);
|
|
}
|
|
} else {
|
|
// Check for ISO 14443A-4 compliant commands, look at left nibble
|
|
switch (receivedCmd[0]) {
|
|
case 0x02:
|
|
case 0x03: { // IBlock (command no CID)
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
dynamic_response_info.response[1] = 0x90;
|
|
dynamic_response_info.response[2] = 0x00;
|
|
dynamic_response_info.response_n = 3;
|
|
} break;
|
|
case 0x0B:
|
|
case 0x0A: { // IBlock (command CID)
|
|
dynamic_response_info.response[0] = receivedCmd[0];
|
|
dynamic_response_info.response[1] = 0x00;
|
|
dynamic_response_info.response[2] = 0x90;
|
|
dynamic_response_info.response[3] = 0x00;
|
|
dynamic_response_info.response_n = 4;
|
|
} break;
|
|
|
|
case 0x1A:
|
|
case 0x1B: { // Chaining command
|
|
dynamic_response_info.response[0] = 0xaa | ((receivedCmd[0]) & 1);
|
|
dynamic_response_info.response_n = 2;
|
|
} break;
|
|
|
|
case 0xAA:
|
|
case 0xBB: {
|
|
dynamic_response_info.response[0] = receivedCmd[0] ^ 0x11;
|
|
dynamic_response_info.response_n = 2;
|
|
} break;
|
|
|
|
case 0xBA: { // ping / pong
|
|
dynamic_response_info.response[0] = 0xAB;
|
|
dynamic_response_info.response[1] = 0x00;
|
|
dynamic_response_info.response_n = 2;
|
|
} break;
|
|
|
|
case 0xCA:
|
|
case 0xC2: { // Readers sends deselect command
|
|
dynamic_response_info.response[0] = 0xCA;
|
|
dynamic_response_info.response[1] = 0x00;
|
|
dynamic_response_info.response_n = 2;
|
|
} break;
|
|
|
|
default: {
|
|
// Never seen this command before
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
Dbprintf("Received unknown command (len=%d):",len);
|
|
Dbhexdump(len,receivedCmd,false);
|
|
// Do not respond
|
|
dynamic_response_info.response_n = 0;
|
|
} break;
|
|
}
|
|
|
|
if (dynamic_response_info.response_n > 0) {
|
|
// Copy the CID from the reader query
|
|
dynamic_response_info.response[1] = receivedCmd[1];
|
|
|
|
// Add CRC bytes, always used in ISO 14443A-4 compliant cards
|
|
AddCrc14A(dynamic_response_info.response, dynamic_response_info.response_n);
|
|
dynamic_response_info.response_n += 2;
|
|
|
|
if (prepare_tag_modulation(&dynamic_response_info,DYNAMIC_MODULATION_BUFFER_SIZE) == false) {
|
|
DbpString("Error preparing tag response");
|
|
LogTrace(receivedCmd, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
p_response = &dynamic_response_info;
|
|
}
|
|
}
|
|
|
|
// Count number of wakeups received after a halt
|
|
if (order == 6 && lastorder == 5) { happened++; }
|
|
|
|
// Count number of other messages after a halt
|
|
if (order != 6 && lastorder == 5) { happened2++; }
|
|
|
|
cmdsRecvd++;
|
|
|
|
if (p_response != NULL) {
|
|
EmSendCmd14443aRaw(p_response->modulation, p_response->modulation_n);
|
|
// do the tracing for the previous reader request and this tag answer:
|
|
uint8_t par[MAX_PARITY_SIZE] = {0x00};
|
|
GetParity(p_response->response, p_response->response_n, par);
|
|
|
|
EmLogTrace(Uart.output,
|
|
Uart.len,
|
|
Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.parity,
|
|
p_response->response,
|
|
p_response->response_n,
|
|
LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_TAG,
|
|
(LastTimeProxToAirStart + p_response->ProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG,
|
|
par);
|
|
}
|
|
}
|
|
|
|
cmd_send(CMD_ACK,1,0,0,0,0);
|
|
switch_off();
|
|
|
|
BigBuf_free_keep_EM();
|
|
|
|
if (MF_DBGLEVEL >= 4){
|
|
Dbprintf("-[ Wake ups after halt [%d]", happened);
|
|
Dbprintf("-[ Messages after halt [%d]", happened2);
|
|
Dbprintf("-[ Num of received cmd [%d]", cmdsRecvd);
|
|
Dbprintf("-[ Num of moebius tries [%d]", moebius_count);
|
|
}
|
|
}
|
|
|
|
// prepare a delayed transfer. This simply shifts ToSend[] by a number
|
|
// of bits specified in the delay parameter.
|
|
void PrepareDelayedTransfer(uint16_t delay) {
|
|
delay &= 0x07;
|
|
if (!delay) return;
|
|
|
|
uint8_t bitmask = 0;
|
|
uint8_t bits_to_shift = 0;
|
|
uint8_t bits_shifted = 0;
|
|
uint16_t i = 0;
|
|
|
|
for (i = 0; i < delay; i++)
|
|
bitmask |= (0x01 << i);
|
|
|
|
ToSend[ToSendMax++] = 0x00;
|
|
|
|
for (i = 0; i < ToSendMax; i++) {
|
|
bits_to_shift = ToSend[i] & bitmask;
|
|
ToSend[i] = ToSend[i] >> delay;
|
|
ToSend[i] = ToSend[i] | (bits_shifted << (8 - delay));
|
|
bits_shifted = bits_to_shift;
|
|
}
|
|
}
|
|
|
|
|
|
//-------------------------------------------------------------------------------------
|
|
// Transmit the command (to the tag) that was placed in ToSend[].
|
|
// Parameter timing:
|
|
// if NULL: transfer at next possible time, taking into account
|
|
// request guard time and frame delay time
|
|
// if == 0: transfer immediately and return time of transfer
|
|
// if != 0: delay transfer until time specified
|
|
//-------------------------------------------------------------------------------------
|
|
static void TransmitFor14443a(const uint8_t *cmd, uint16_t len, uint32_t *timing) {
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_MOD);
|
|
|
|
if (timing) {
|
|
if (*timing == 0) // Measure time
|
|
*timing = (GetCountSspClk() + 8) & 0xfffffff8;
|
|
else
|
|
PrepareDelayedTransfer(*timing & 0x00000007); // Delay transfer (fine tuning - up to 7 MF clock ticks)
|
|
|
|
if(MF_DBGLEVEL >= 4 && GetCountSspClk() >= (*timing & 0xfffffff8))
|
|
Dbprintf("TransmitFor14443a: Missed timing");
|
|
while (GetCountSspClk() < (*timing & 0xfffffff8)) {}; // Delay transfer (multiple of 8 MF clock ticks)
|
|
LastTimeProxToAirStart = *timing;
|
|
} else {
|
|
|
|
uint32_t ThisTransferTime = 0;
|
|
ThisTransferTime = ((MAX(NextTransferTime, GetCountSspClk()) & 0xfffffff8) + 8);
|
|
|
|
while (GetCountSspClk() < ThisTransferTime) {};
|
|
|
|
LastTimeProxToAirStart = ThisTransferTime;
|
|
}
|
|
|
|
// clear TXRDY
|
|
AT91C_BASE_SSC->SSC_THR = SEC_Y;
|
|
|
|
volatile uint8_t b;
|
|
uint16_t c = 0;
|
|
while (c < len) {
|
|
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
|
|
AT91C_BASE_SSC->SSC_THR = cmd[c++];
|
|
}
|
|
//iceman test
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
|
b = (uint16_t)(AT91C_BASE_SSC->SSC_RHR); (void)b;
|
|
}
|
|
}
|
|
|
|
NextTransferTime = MAX(NextTransferTime, LastTimeProxToAirStart + REQUEST_GUARD_TIME);
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Prepare reader command (in bits, support short frames) to send to FPGA
|
|
//-----------------------------------------------------------------------------
|
|
void CodeIso14443aBitsAsReaderPar(const uint8_t *cmd, uint16_t bits, const uint8_t *parity) {
|
|
int i, j;
|
|
int last = 0;
|
|
uint8_t b;
|
|
|
|
ToSendReset();
|
|
|
|
// Start of Communication (Seq. Z)
|
|
ToSend[++ToSendMax] = SEC_Z;
|
|
LastProxToAirDuration = 8 * (ToSendMax+1) - 6;
|
|
|
|
size_t bytecount = nbytes(bits);
|
|
// Generate send structure for the data bits
|
|
for (i = 0; i < bytecount; i++) {
|
|
// Get the current byte to send
|
|
b = cmd[i];
|
|
size_t bitsleft = MIN((bits-(i*8)),8);
|
|
|
|
for (j = 0; j < bitsleft; j++) {
|
|
if (b & 1) {
|
|
// Sequence X
|
|
ToSend[++ToSendMax] = SEC_X;
|
|
LastProxToAirDuration = 8 * (ToSendMax+1) - 2;
|
|
last = 1;
|
|
} else {
|
|
if (last == 0) {
|
|
// Sequence Z
|
|
ToSend[++ToSendMax] = SEC_Z;
|
|
LastProxToAirDuration = 8 * (ToSendMax+1) - 6;
|
|
} else {
|
|
// Sequence Y
|
|
ToSend[++ToSendMax] = SEC_Y;
|
|
last = 0;
|
|
}
|
|
}
|
|
b >>= 1;
|
|
}
|
|
|
|
// Only transmit parity bit if we transmitted a complete byte
|
|
if (j == 8 && parity != NULL) {
|
|
// Get the parity bit
|
|
if (parity[i>>3] & (0x80 >> (i&0x0007))) {
|
|
// Sequence X
|
|
ToSend[++ToSendMax] = SEC_X;
|
|
LastProxToAirDuration = 8 * (ToSendMax+1) - 2;
|
|
last = 1;
|
|
} else {
|
|
if (last == 0) {
|
|
// Sequence Z
|
|
ToSend[++ToSendMax] = SEC_Z;
|
|
LastProxToAirDuration = 8 * (ToSendMax+1) - 6;
|
|
} else {
|
|
// Sequence Y
|
|
ToSend[++ToSendMax] = SEC_Y;
|
|
last = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// End of Communication: Logic 0 followed by Sequence Y
|
|
if (last == 0) {
|
|
// Sequence Z
|
|
ToSend[++ToSendMax] = SEC_Z;
|
|
LastProxToAirDuration = 8 * (ToSendMax+1) - 6;
|
|
} else {
|
|
// Sequence Y
|
|
ToSend[++ToSendMax] = SEC_Y;
|
|
last = 0;
|
|
}
|
|
ToSend[++ToSendMax] = SEC_Y;
|
|
|
|
// Convert to length of command:
|
|
ToSendMax++;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Prepare reader command to send to FPGA
|
|
//-----------------------------------------------------------------------------
|
|
void CodeIso14443aAsReaderPar(const uint8_t *cmd, uint16_t len, const uint8_t *parity) {
|
|
CodeIso14443aBitsAsReaderPar(cmd, len*8, parity);
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Wait for commands from reader
|
|
// Stop when button is pressed (return 1) or field was gone (return 2)
|
|
// Or return 0 when command is captured
|
|
//-----------------------------------------------------------------------------
|
|
int EmGetCmd(uint8_t *received, uint16_t *len, uint8_t *parity) {
|
|
*len = 0;
|
|
|
|
uint32_t timer = 0, vtime = 0;
|
|
int analogCnt = 0;
|
|
int analogAVG = 0;
|
|
|
|
// Set FPGA mode to "simulated ISO 14443 tag", no modulation (listen
|
|
// only, since we are receiving, not transmitting).
|
|
// Signal field is off with the appropriate LED
|
|
LED_D_OFF();
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
// Set ADC to read field strength
|
|
AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
|
|
AT91C_BASE_ADC->ADC_MR =
|
|
ADC_MODE_PRESCALE(63) |
|
|
ADC_MODE_STARTUP_TIME(1) |
|
|
ADC_MODE_SAMPLE_HOLD_TIME(15);
|
|
AT91C_BASE_ADC->ADC_CHER = ADC_CHANNEL(ADC_CHAN_HF);
|
|
// start ADC
|
|
AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
|
|
|
|
// Now run a 'software UART' on the stream of incoming samples.
|
|
UartInit(received, parity);
|
|
|
|
// Clear RXRDY:
|
|
uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
|
|
|
|
for(;;) {
|
|
WDT_HIT();
|
|
|
|
if (BUTTON_PRESS()) return 1;
|
|
|
|
// test if the field exists
|
|
if (AT91C_BASE_ADC->ADC_SR & ADC_END_OF_CONVERSION(ADC_CHAN_HF)) {
|
|
analogCnt++;
|
|
analogAVG += AT91C_BASE_ADC->ADC_CDR[ADC_CHAN_HF];
|
|
AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
|
|
if (analogCnt >= 32) {
|
|
if ((MAX_ADC_HF_VOLTAGE * (analogAVG / analogCnt) >> 10) < MF_MINFIELDV) {
|
|
vtime = GetTickCount();
|
|
if (!timer) timer = vtime;
|
|
// 50ms no field --> card to idle state
|
|
if (vtime - timer > 50) return 2;
|
|
} else
|
|
if (timer) timer = 0;
|
|
analogCnt = 0;
|
|
analogAVG = 0;
|
|
}
|
|
}
|
|
|
|
// receive and test the miller decoding
|
|
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
|
b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
|
|
if(MillerDecoding(b, 0)) {
|
|
*len = Uart.len;
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
int EmSendCmd14443aRaw(uint8_t *resp, uint16_t respLen) {
|
|
volatile uint8_t b;
|
|
uint16_t i = 0;
|
|
uint32_t ThisTransferTime;
|
|
bool correctionNeeded;
|
|
|
|
// Modulate Manchester
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_MOD);
|
|
|
|
// Include correction bit if necessary
|
|
if (Uart.bitCount == 7)
|
|
{
|
|
// Short tags (7 bits) don't have parity, determine the correct value from MSB
|
|
correctionNeeded = Uart.output[0] & 0x40;
|
|
}
|
|
else
|
|
{
|
|
// The parity bits are left-aligned
|
|
correctionNeeded = Uart.parity[(Uart.len-1)/8] & (0x80 >> ((Uart.len-1) & 7));
|
|
}
|
|
// 1236, so correction bit needed
|
|
i = (correctionNeeded) ? 0 : 1;
|
|
|
|
// clear receiving shift register and holding register
|
|
while(!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY));
|
|
b = AT91C_BASE_SSC->SSC_RHR; (void) b;
|
|
while(!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY));
|
|
b = AT91C_BASE_SSC->SSC_RHR; (void) b;
|
|
|
|
// wait for the FPGA to signal fdt_indicator == 1 (the FPGA is ready to queue new data in its delay line)
|
|
for (uint8_t j = 0; j < 5; j++) { // allow timeout - better late than never
|
|
while(!(AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY));
|
|
if (AT91C_BASE_SSC->SSC_RHR) break;
|
|
}
|
|
|
|
while ((ThisTransferTime = GetCountSspClk()) & 0x00000007);
|
|
|
|
// Clear TXRDY:
|
|
AT91C_BASE_SSC->SSC_THR = SEC_F;
|
|
|
|
// send cycle
|
|
for(; i < respLen; ) {
|
|
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
|
|
AT91C_BASE_SSC->SSC_THR = resp[i++];
|
|
FpgaSendQueueDelay = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
|
|
}
|
|
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
|
b = (uint16_t)(AT91C_BASE_SSC->SSC_RHR); (void)b;
|
|
}
|
|
if(BUTTON_PRESS()) break;
|
|
}
|
|
|
|
// Ensure that the FPGA Delay Queue is empty before we switch to TAGSIM_LISTEN again:
|
|
uint8_t fpga_queued_bits = FpgaSendQueueDelay >> 3;
|
|
for (i = 0; i <= fpga_queued_bits/8 + 1; ) {
|
|
if(AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_TXRDY)) {
|
|
AT91C_BASE_SSC->SSC_THR = SEC_F;
|
|
FpgaSendQueueDelay = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
|
|
i++;
|
|
}
|
|
}
|
|
LastTimeProxToAirStart = ThisTransferTime + (correctionNeeded ? 8 : 0);
|
|
return 0;
|
|
}
|
|
|
|
int EmSend4bit(uint8_t resp){
|
|
Code4bitAnswerAsTag(resp);
|
|
int res = EmSendCmd14443aRaw(ToSend, ToSendMax);
|
|
// do the tracing for the previous reader request and this tag answer:
|
|
uint8_t par[1] = {0x00};
|
|
GetParity(&resp, 1, par);
|
|
EmLogTrace(Uart.output,
|
|
Uart.len,
|
|
Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.parity,
|
|
&resp,
|
|
1,
|
|
LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_TAG,
|
|
(LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG,
|
|
par);
|
|
return res;
|
|
}
|
|
int EmSendCmdPar(uint8_t *resp, uint16_t respLen, uint8_t *par) {
|
|
return EmSendCmdParEx(resp, respLen, par, false);
|
|
}
|
|
int EmSendCmdParEx(uint8_t *resp, uint16_t respLen, uint8_t *par, bool collision){
|
|
CodeIso14443aAsTagPar(resp, respLen, par, collision);
|
|
int res = EmSendCmd14443aRaw(ToSend, ToSendMax);
|
|
// do the tracing for the previous reader request and this tag answer:
|
|
EmLogTrace(Uart.output,
|
|
Uart.len,
|
|
Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG,
|
|
Uart.parity,
|
|
resp,
|
|
respLen,
|
|
LastTimeProxToAirStart*16 + DELAY_ARM2AIR_AS_TAG,
|
|
(LastTimeProxToAirStart + LastProxToAirDuration)*16 + DELAY_ARM2AIR_AS_TAG,
|
|
par);
|
|
return res;
|
|
}
|
|
int EmSendCmd(uint8_t *resp, uint16_t respLen){
|
|
return EmSendCmdEx(resp, respLen, false);
|
|
}
|
|
int EmSendCmdEx(uint8_t *resp, uint16_t respLen, bool collision){
|
|
uint8_t par[MAX_PARITY_SIZE] = {0x00};
|
|
GetParity(resp, respLen, par);
|
|
return EmSendCmdParEx(resp, respLen, par, collision);
|
|
}
|
|
|
|
bool EmLogTrace(uint8_t *reader_data, uint16_t reader_len, uint32_t reader_StartTime, uint32_t reader_EndTime, uint8_t *reader_Parity,
|
|
uint8_t *tag_data, uint16_t tag_len, uint32_t tag_StartTime, uint32_t tag_EndTime, uint8_t *tag_Parity)
|
|
{
|
|
// we cannot exactly measure the end and start of a received command from reader. However we know that the delay from
|
|
// end of the received command to start of the tag's (simulated by us) answer is n*128+20 or n*128+84 resp.
|
|
// with n >= 9. The start of the tags answer can be measured and therefore the end of the received command be calculated:
|
|
uint16_t reader_modlen = reader_EndTime - reader_StartTime;
|
|
uint16_t approx_fdt = tag_StartTime - reader_EndTime;
|
|
uint16_t exact_fdt = (approx_fdt - 20 + 32)/64 * 64 + 20;
|
|
reader_EndTime = tag_StartTime - exact_fdt;
|
|
reader_StartTime = reader_EndTime - reader_modlen;
|
|
|
|
if (!LogTrace(reader_data, reader_len, reader_StartTime, reader_EndTime, reader_Parity, true))
|
|
return false;
|
|
else
|
|
return(!LogTrace(tag_data, tag_len, tag_StartTime, tag_EndTime, tag_Parity, false));
|
|
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Wait a certain time for tag response
|
|
// If a response is captured return TRUE
|
|
// If it takes too long return FALSE
|
|
//-----------------------------------------------------------------------------
|
|
static int GetIso14443aAnswerFromTag(uint8_t *receivedResponse, uint8_t *receivedResponsePar, uint16_t offset) {
|
|
uint32_t c = 0;
|
|
|
|
// Set FPGA mode to "reader listen mode", no modulation (listen
|
|
// only, since we are receiving, not transmitting).
|
|
// Signal field is on with the appropriate LED
|
|
LED_D_ON();
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_READER_LISTEN);
|
|
|
|
// Now get the answer from the card
|
|
DemodInit(receivedResponse, receivedResponsePar);
|
|
|
|
// clear RXRDY:
|
|
uint8_t b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
|
|
|
|
uint32_t timeout = iso14a_get_timeout();
|
|
for(;;) {
|
|
WDT_HIT();
|
|
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
|
b = (uint8_t)AT91C_BASE_SSC->SSC_RHR;
|
|
if (ManchesterDecoding(b, offset, 0)) {
|
|
NextTransferTime = MAX(NextTransferTime, Demod.endTime - (DELAY_AIR2ARM_AS_READER + DELAY_ARM2AIR_AS_READER)/16 + FRAME_DELAY_TIME_PICC_TO_PCD);
|
|
return true;
|
|
} else if (c++ > timeout && Demod.state == DEMOD_UNSYNCD) {
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void ReaderTransmitBitsPar(uint8_t* frame, uint16_t bits, uint8_t *par, uint32_t *timing) {
|
|
|
|
CodeIso14443aBitsAsReaderPar(frame, bits, par);
|
|
// Send command to tag
|
|
TransmitFor14443a(ToSend, ToSendMax, timing);
|
|
if(trigger) LED_A_ON();
|
|
|
|
LogTrace(frame, nbytes(bits), (LastTimeProxToAirStart<<4) + DELAY_ARM2AIR_AS_READER, ((LastTimeProxToAirStart + LastProxToAirDuration)<<4) + DELAY_ARM2AIR_AS_READER, par, true);
|
|
}
|
|
|
|
void ReaderTransmitPar(uint8_t* frame, uint16_t len, uint8_t *par, uint32_t *timing) {
|
|
ReaderTransmitBitsPar(frame, len*8, par, timing);
|
|
}
|
|
|
|
void ReaderTransmitBits(uint8_t* frame, uint16_t len, uint32_t *timing) {
|
|
// Generate parity and redirect
|
|
uint8_t par[MAX_PARITY_SIZE] = {0x00};
|
|
GetParity(frame, len/8, par);
|
|
ReaderTransmitBitsPar(frame, len, par, timing);
|
|
}
|
|
|
|
void ReaderTransmit(uint8_t* frame, uint16_t len, uint32_t *timing) {
|
|
// Generate parity and redirect
|
|
uint8_t par[MAX_PARITY_SIZE] = {0x00};
|
|
GetParity(frame, len, par);
|
|
ReaderTransmitBitsPar(frame, len*8, par, timing);
|
|
}
|
|
|
|
int ReaderReceiveOffset(uint8_t* receivedAnswer, uint16_t offset, uint8_t *parity) {
|
|
if (!GetIso14443aAnswerFromTag(receivedAnswer, parity, offset))
|
|
return false;
|
|
LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, false);
|
|
return Demod.len;
|
|
}
|
|
|
|
int ReaderReceive(uint8_t *receivedAnswer, uint8_t *parity) {
|
|
if (!GetIso14443aAnswerFromTag(receivedAnswer, parity, 0))
|
|
return false;
|
|
LogTrace(receivedAnswer, Demod.len, Demod.startTime*16 - DELAY_AIR2ARM_AS_READER, Demod.endTime*16 - DELAY_AIR2ARM_AS_READER, parity, false);
|
|
return Demod.len;
|
|
}
|
|
|
|
// This function misstreats the ISO 14443a anticollision procedure.
|
|
// by fooling the reader there is a collision and forceing the reader to
|
|
// increase the uid bytes. The might be an overflow, DoS will occure.
|
|
void iso14443a_antifuzz(uint32_t flags){
|
|
|
|
// We need to listen to the high-frequency, peak-detected path.
|
|
iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
BigBuf_free_keep_EM();
|
|
clear_trace();
|
|
set_tracing(true);
|
|
|
|
int len = 0;
|
|
|
|
// allocate buffers:
|
|
uint8_t *received = BigBuf_malloc(MAX_FRAME_SIZE);
|
|
uint8_t *receivedPar = BigBuf_malloc(MAX_PARITY_SIZE);
|
|
uint8_t *resp = BigBuf_malloc(20);
|
|
|
|
memset(resp, 0xFF , 20);
|
|
|
|
LED_A_ON();
|
|
for (;;) {
|
|
WDT_HIT();
|
|
|
|
// Clean receive command buffer
|
|
if (!GetIso14443aCommandFromReader(received, receivedPar, &len)) {
|
|
Dbprintf("Anti-fuzz stopped. Trace length: %d ", BigBuf_get_traceLen());
|
|
break;
|
|
}
|
|
if ( received[0] == ISO14443A_CMD_WUPA || received[0] == ISO14443A_CMD_REQA) {
|
|
resp[0] = 0x04;
|
|
resp[1] = 0x00;
|
|
|
|
if ( (flags & FLAG_7B_UID_IN_DATA) == FLAG_7B_UID_IN_DATA ) {
|
|
resp[0] = 0x44;
|
|
}
|
|
|
|
EmSendCmd(resp, 2);
|
|
continue;
|
|
}
|
|
|
|
// Received request for UID (cascade 1)
|
|
//if (received[1] >= 0x20 && received[1] <= 0x57 && received[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT) {
|
|
if (received[1] >= 0x20 && received[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT) {
|
|
resp[0] = 0xFF;
|
|
resp[1] = 0xFF;
|
|
resp[2] = 0xFF;
|
|
resp[3] = 0xFF;
|
|
resp[4] = resp[0] ^ resp[1] ^ resp[2] ^ resp[3];
|
|
colpos = 0;
|
|
|
|
if ( (flags & FLAG_7B_UID_IN_DATA) == FLAG_7B_UID_IN_DATA ) {
|
|
resp[0] = 0x88;
|
|
colpos = 8;
|
|
}
|
|
|
|
EmSendCmdEx(resp, 5, true);
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("ANTICOLL or SELECT %x", received[1]);
|
|
LED_D_INV();
|
|
|
|
continue;
|
|
} else if (received[1] == 0x20 && received[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2) { // Received request for UID (cascade 2)
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("ANTICOLL or SELECT_2");
|
|
} else if (received[1] == 0x70 && received[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT) { // Received a SELECT (cascade 1)
|
|
} else if (received[1] == 0x70 && received[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2) { // Received a SELECT (cascade 2)
|
|
} else {
|
|
Dbprintf("unknown command %x", received[0]);
|
|
}
|
|
}
|
|
|
|
cmd_send(CMD_ACK,1,0,0,0,0);
|
|
switch_off();
|
|
BigBuf_free_keep_EM();
|
|
}
|
|
|
|
static void iso14a_set_ATS_times(uint8_t *ats) {
|
|
|
|
uint8_t tb1;
|
|
uint8_t fwi, sfgi;
|
|
uint32_t fwt, sfgt;
|
|
|
|
if (ats[0] > 1) { // there is a format byte T0
|
|
if ((ats[1] & 0x20) == 0x20) { // there is an interface byte TB(1)
|
|
if ((ats[1] & 0x10) == 0x10) { // there is an interface byte TA(1) preceding TB(1)
|
|
tb1 = ats[3];
|
|
} else {
|
|
tb1 = ats[2];
|
|
}
|
|
fwi = (tb1 & 0xf0) >> 4; // frame waiting time integer (FWI)
|
|
if (fwi != 15) {
|
|
fwt = 256 * 16 * (1 << fwi); // frame waiting time (FWT) in 1/fc
|
|
iso14a_set_timeout(fwt/(8*16));
|
|
}
|
|
sfgi = tb1 & 0x0f; // startup frame guard time integer (SFGI)
|
|
if (sfgi != 0 && sfgi != 15) {
|
|
sfgt = 256 * 16 * (1 << sfgi); // startup frame guard time (SFGT) in 1/fc
|
|
NextTransferTime = MAX(NextTransferTime, Demod.endTime + (sfgt - DELAY_AIR2ARM_AS_READER - DELAY_ARM2AIR_AS_READER)/16);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int GetATQA(uint8_t *resp, uint8_t *resp_par) {
|
|
|
|
#define WUPA_RETRY_TIMEOUT 10 // 10ms
|
|
uint8_t wupa[] = { ISO14443A_CMD_WUPA }; // 0x26 - REQA 0x52 - WAKE-UP
|
|
|
|
uint32_t save_iso14a_timeout = iso14a_get_timeout();
|
|
iso14a_set_timeout(1236/(16*8)+1); // response to WUPA is expected at exactly 1236/fc. No need to wait longer.
|
|
|
|
uint32_t start_time = GetTickCount();
|
|
int len;
|
|
|
|
// we may need several tries if we did send an unknown command or a wrong authentication before...
|
|
do {
|
|
// Broadcast for a card, WUPA (0x52) will force response from all cards in the field
|
|
ReaderTransmitBitsPar(wupa, 7, NULL, NULL);
|
|
// Receive the ATQA
|
|
len = ReaderReceive(resp, resp_par);
|
|
} while (len == 0 && GetTickCount() <= start_time + WUPA_RETRY_TIMEOUT);
|
|
|
|
iso14a_set_timeout(save_iso14a_timeout);
|
|
return len;
|
|
}
|
|
|
|
// performs iso14443a anticollision (optional) and card select procedure
|
|
// fills the uid and cuid pointer unless NULL
|
|
// fills the card info record unless NULL
|
|
// if anticollision is false, then the UID must be provided in uid_ptr[]
|
|
// and num_cascades must be set (1: 4 Byte UID, 2: 7 Byte UID, 3: 10 Byte UID)
|
|
// requests ATS unless no_rats is true
|
|
int iso14443a_select_card(byte_t *uid_ptr, iso14a_card_select_t *p_card, uint32_t *cuid_ptr, bool anticollision, uint8_t num_cascades, bool no_rats) {
|
|
|
|
uint8_t sel_all[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT,0x20 };
|
|
uint8_t sel_uid[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
|
|
uint8_t rats[] = { ISO14443A_CMD_RATS,0x80,0x00,0x00 }; // FSD=256, FSDI=8, CID=0
|
|
uint8_t resp[MAX_FRAME_SIZE] = {0}; // theoretically. A usual RATS will be much smaller
|
|
uint8_t resp_par[MAX_PARITY_SIZE] = {0};
|
|
uint8_t uid_resp[4] = {0};
|
|
size_t uid_resp_len = 0;
|
|
|
|
uint8_t sak = 0x04; // cascade uid
|
|
int cascade_level = 0;
|
|
int len;
|
|
|
|
if (p_card) {
|
|
p_card->uidlen = 0;
|
|
memset(p_card->uid, 0, 10);
|
|
p_card->ats_len = 0;
|
|
}
|
|
|
|
if (!GetATQA(resp, resp_par)) {
|
|
return 0;
|
|
}
|
|
|
|
if (p_card) {
|
|
p_card->atqa[0] = resp[0];
|
|
p_card->atqa[1] = resp[1];
|
|
}
|
|
|
|
if (anticollision) {
|
|
// clear uid
|
|
if (uid_ptr)
|
|
memset(uid_ptr, 0, 10);
|
|
}
|
|
|
|
// check for proprietary anticollision:
|
|
if ((resp[0] & 0x1F) == 0) return 3;
|
|
|
|
// OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
|
|
// which case we need to make a cascade 2 request and select - this is a long UID
|
|
// While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
|
|
for(; sak & 0x04; cascade_level++) {
|
|
// SELECT_* (L1: 0x93, L2: 0x95, L3: 0x97)
|
|
sel_uid[0] = sel_all[0] = 0x93 + cascade_level * 2;
|
|
|
|
if (anticollision) {
|
|
// SELECT_ALL
|
|
ReaderTransmit(sel_all, sizeof(sel_all), NULL);
|
|
if (!ReaderReceive(resp, resp_par)) return 0;
|
|
|
|
if (Demod.collisionPos) { // we had a collision and need to construct the UID bit by bit
|
|
memset(uid_resp, 0, 4);
|
|
uint16_t uid_resp_bits = 0;
|
|
uint16_t collision_answer_offset = 0;
|
|
// anti-collision-loop:
|
|
while (Demod.collisionPos) {
|
|
Dbprintf("Multiple tags detected. Collision after Bit %d", Demod.collisionPos);
|
|
for (uint16_t i = collision_answer_offset; i < Demod.collisionPos; i++, uid_resp_bits++) { // add valid UID bits before collision point
|
|
uint16_t UIDbit = (resp[i/8] >> (i % 8)) & 0x01;
|
|
uid_resp[uid_resp_bits / 8] |= UIDbit << (uid_resp_bits % 8);
|
|
}
|
|
uid_resp[uid_resp_bits/8] |= 1 << (uid_resp_bits % 8); // next time select the card(s) with a 1 in the collision position
|
|
uid_resp_bits++;
|
|
// construct anticollosion command:
|
|
sel_uid[1] = ((2 + uid_resp_bits/8) << 4) | (uid_resp_bits & 0x07); // length of data in bytes and bits
|
|
for (uint16_t i = 0; i <= uid_resp_bits/8; i++) {
|
|
sel_uid[2+i] = uid_resp[i];
|
|
}
|
|
collision_answer_offset = uid_resp_bits%8;
|
|
ReaderTransmitBits(sel_uid, 16 + uid_resp_bits, NULL);
|
|
if (!ReaderReceiveOffset(resp, collision_answer_offset, resp_par)) return 0;
|
|
}
|
|
// finally, add the last bits and BCC of the UID
|
|
for (uint16_t i = collision_answer_offset; i < (Demod.len-1)*8; i++, uid_resp_bits++) {
|
|
uint16_t UIDbit = (resp[i/8] >> (i%8)) & 0x01;
|
|
uid_resp[uid_resp_bits/8] |= UIDbit << (uid_resp_bits % 8);
|
|
}
|
|
|
|
} else { // no collision, use the response to SELECT_ALL as current uid
|
|
memcpy(uid_resp, resp, 4);
|
|
}
|
|
|
|
} else {
|
|
if (cascade_level < num_cascades - 1) {
|
|
uid_resp[0] = 0x88;
|
|
memcpy(uid_resp+1, uid_ptr+cascade_level*3, 3);
|
|
} else {
|
|
memcpy(uid_resp, uid_ptr+cascade_level*3, 4);
|
|
}
|
|
}
|
|
uid_resp_len = 4;
|
|
|
|
// calculate crypto UID. Always use last 4 Bytes.
|
|
if(cuid_ptr)
|
|
*cuid_ptr = bytes_to_num(uid_resp, 4);
|
|
|
|
// Construct SELECT UID command
|
|
sel_uid[1] = 0x70; // transmitting a full UID (1 Byte cmd, 1 Byte NVB, 4 Byte UID, 1 Byte BCC, 2 Bytes CRC)
|
|
memcpy(sel_uid+2, uid_resp, 4); // the UID received during anticollision, or the provided UID
|
|
sel_uid[6] = sel_uid[2] ^ sel_uid[3] ^ sel_uid[4] ^ sel_uid[5]; // calculate and add BCC
|
|
AddCrc14A(sel_uid, 7); // calculate and add CRC
|
|
ReaderTransmit(sel_uid, sizeof(sel_uid), NULL);
|
|
|
|
// Receive the SAK
|
|
if (!ReaderReceive(resp, resp_par)) return 0;
|
|
|
|
sak = resp[0];
|
|
|
|
// Test if more parts of the uid are coming
|
|
if ((sak & 0x04) /* && uid_resp[0] == 0x88 */) {
|
|
// Remove first byte, 0x88 is not an UID byte, it CT, see page 3 of:
|
|
// http://www.nxp.com/documents/application_note/AN10927.pdf
|
|
uid_resp[0] = uid_resp[1];
|
|
uid_resp[1] = uid_resp[2];
|
|
uid_resp[2] = uid_resp[3];
|
|
uid_resp_len = 3;
|
|
}
|
|
|
|
if(uid_ptr && anticollision)
|
|
memcpy(uid_ptr + (cascade_level*3), uid_resp, uid_resp_len);
|
|
|
|
if(p_card) {
|
|
memcpy(p_card->uid + (cascade_level*3), uid_resp, uid_resp_len);
|
|
p_card->uidlen += uid_resp_len;
|
|
}
|
|
}
|
|
|
|
if (p_card) {
|
|
p_card->sak = sak;
|
|
}
|
|
|
|
// PICC compilant with iso14443a-4 ---> (SAK & 0x20 != 0)
|
|
if( (sak & 0x20) == 0) return 2;
|
|
|
|
// RATS, Request for answer to select
|
|
if ( !no_rats ) {
|
|
|
|
AddCrc14A(rats, 2);
|
|
ReaderTransmit(rats, sizeof(rats), NULL);
|
|
len = ReaderReceive(resp, resp_par);
|
|
|
|
if (!len) return 0;
|
|
|
|
if (p_card) {
|
|
memcpy(p_card->ats, resp, sizeof(p_card->ats));
|
|
p_card->ats_len = len;
|
|
}
|
|
|
|
// reset the PCB block number
|
|
iso14_pcb_blocknum = 0;
|
|
|
|
// set default timeout and delay next transfer based on ATS
|
|
iso14a_set_ATS_times(resp);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
int iso14443a_fast_select_card(uint8_t *uid_ptr, uint8_t num_cascades) {
|
|
uint8_t sel_all[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT,0x20 };
|
|
uint8_t sel_uid[] = { ISO14443A_CMD_ANTICOLL_OR_SELECT,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
|
|
uint8_t resp[5] = {0}; // theoretically. A usual RATS will be much smaller
|
|
uint8_t resp_par[1] = {0};
|
|
uint8_t uid_resp[4] = {0};
|
|
|
|
uint8_t sak = 0x04; // cascade uid
|
|
int cascade_level = 0;
|
|
|
|
if (!GetATQA(resp, resp_par)) {
|
|
return 0;
|
|
}
|
|
|
|
// OK we will select at least at cascade 1, lets see if first byte of UID was 0x88 in
|
|
// which case we need to make a cascade 2 request and select - this is a long UID
|
|
// While the UID is not complete, the 3nd bit (from the right) is set in the SAK.
|
|
for(; sak & 0x04; cascade_level++) {
|
|
// SELECT_* (L1: 0x93, L2: 0x95, L3: 0x97)
|
|
sel_uid[0] = sel_all[0] = 0x93 + cascade_level * 2;
|
|
|
|
if (cascade_level < num_cascades - 1) {
|
|
uid_resp[0] = 0x88;
|
|
memcpy(uid_resp+1, uid_ptr+cascade_level*3, 3);
|
|
} else {
|
|
memcpy(uid_resp, uid_ptr+cascade_level*3, 4);
|
|
}
|
|
|
|
// Construct SELECT UID command
|
|
//sel_uid[1] = 0x70; // transmitting a full UID (1 Byte cmd, 1 Byte NVB, 4 Byte UID, 1 Byte BCC, 2 Bytes CRC)
|
|
memcpy(sel_uid+2, uid_resp, 4); // the UID received during anticollision, or the provided UID
|
|
sel_uid[6] = sel_uid[2] ^ sel_uid[3] ^ sel_uid[4] ^ sel_uid[5]; // calculate and add BCC
|
|
AddCrc14A(sel_uid, 7); // calculate and add CRC
|
|
ReaderTransmit(sel_uid, sizeof(sel_uid), NULL);
|
|
|
|
// Receive the SAK
|
|
if (!ReaderReceive(resp, resp_par)) return 0;
|
|
|
|
sak = resp[0];
|
|
|
|
// Test if more parts of the uid are coming
|
|
if ((sak & 0x04) /* && uid_resp[0] == 0x88 */) {
|
|
// Remove first byte, 0x88 is not an UID byte, it CT, see page 3 of:
|
|
// http://www.nxp.com/documents/application_note/AN10927.pdf
|
|
uid_resp[0] = uid_resp[1];
|
|
uid_resp[1] = uid_resp[2];
|
|
uid_resp[2] = uid_resp[3];
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
void iso14443a_setup(uint8_t fpga_minor_mode) {
|
|
|
|
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
|
|
// Set up the synchronous serial port
|
|
FpgaSetupSsc();
|
|
// connect Demodulated Signal to ADC:
|
|
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
|
|
|
|
LED_D_OFF();
|
|
// Signal field is on with the appropriate LED
|
|
if (fpga_minor_mode == FPGA_HF_ISO14443A_READER_MOD ||
|
|
fpga_minor_mode == FPGA_HF_ISO14443A_READER_LISTEN)
|
|
LED_D_ON();
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_ISO14443A | fpga_minor_mode);
|
|
SpinDelay(100);
|
|
|
|
// Start the timer
|
|
StartCountSspClk();
|
|
|
|
// Prepare the demodulation functions
|
|
DemodReset();
|
|
UartReset();
|
|
NextTransferTime = 2 * DELAY_ARM2AIR_AS_READER;
|
|
iso14a_set_timeout(1060); // 106 * 10ms default
|
|
}
|
|
|
|
/* Peter Fillmore 2015
|
|
Added card id field to the function
|
|
info from ISO14443A standard
|
|
b1 = Block Number
|
|
b2 = RFU (always 1)
|
|
b3 = depends on block
|
|
b4 = Card ID following if set to 1
|
|
b5 = depends on block type
|
|
b6 = depends on block type
|
|
b7,b8 = block type.
|
|
Coding of I-BLOCK:
|
|
b8 b7 b6 b5 b4 b3 b2 b1
|
|
0 0 0 x x x 1 x
|
|
b5 = chaining bit
|
|
Coding of R-block:
|
|
b8 b7 b6 b5 b4 b3 b2 b1
|
|
1 0 1 x x 0 1 x
|
|
b5 = ACK/NACK
|
|
Coding of S-block:
|
|
b8 b7 b6 b5 b4 b3 b2 b1
|
|
1 1 x x x 0 1 0
|
|
b5,b6 = 00 - DESELECT
|
|
11 - WTX
|
|
*/
|
|
int iso14_apdu(uint8_t *cmd, uint16_t cmd_len, bool send_chaining, void *data, uint8_t *res) {
|
|
uint8_t parity[MAX_PARITY_SIZE] = {0x00};
|
|
uint8_t real_cmd[cmd_len + 4];
|
|
|
|
if (cmd_len) {
|
|
// ISO 14443 APDU frame: PCB [CID] [NAD] APDU CRC PCB=0x02
|
|
real_cmd[0] = 0x02; // bnr,nad,cid,chn=0; i-block(0x00)
|
|
if (send_chaining) {
|
|
real_cmd[0] |= 0x10;
|
|
}
|
|
// put block number into the PCB
|
|
real_cmd[0] |= iso14_pcb_blocknum;
|
|
memcpy(real_cmd + 1, cmd, cmd_len);
|
|
} else {
|
|
// R-block. ACK
|
|
real_cmd[0] = 0xA2; // r-block + ACK
|
|
real_cmd[0] |= iso14_pcb_blocknum;
|
|
}
|
|
AddCrc14A(real_cmd, cmd_len + 1);
|
|
|
|
ReaderTransmit(real_cmd, cmd_len + 3, NULL);
|
|
|
|
size_t len = ReaderReceive(data, parity);
|
|
uint8_t *data_bytes = (uint8_t *) data;
|
|
|
|
if (!len) {
|
|
return 0; //DATA LINK ERROR
|
|
} else{
|
|
// S-Block WTX
|
|
while(len && ((data_bytes[0] & 0xF2) == 0xF2)) {
|
|
uint32_t save_iso14a_timeout = iso14a_get_timeout();
|
|
// temporarily increase timeout
|
|
iso14a_set_timeout( MAX((data_bytes[1] & 0x3f) * save_iso14a_timeout, MAX_ISO14A_TIMEOUT) );
|
|
// Transmit WTX back
|
|
// byte1 - WTXM [1..59]. command FWT=FWT*WTXM
|
|
data_bytes[1] = data_bytes[1] & 0x3f; // 2 high bits mandatory set to 0b
|
|
// now need to fix CRC.
|
|
AddCrc14A(data_bytes, len - 2);
|
|
// transmit S-Block
|
|
ReaderTransmit(data_bytes, len, NULL);
|
|
// retrieve the result again (with increased timeout)
|
|
len = ReaderReceive(data, parity);
|
|
data_bytes = data;
|
|
// restore timeout
|
|
iso14a_set_timeout(save_iso14a_timeout);
|
|
}
|
|
|
|
// if we received an I- or R(ACK)-Block with a block number equal to the
|
|
// current block number, toggle the current block number
|
|
if (len >= 3 // PCB+CRC = 3 bytes
|
|
&& ((data_bytes[0] & 0xC0) == 0 // I-Block
|
|
|| (data_bytes[0] & 0xD0) == 0x80) // R-Block with ACK bit set to 0
|
|
&& (data_bytes[0] & 0x01) == iso14_pcb_blocknum) // equal block numbers
|
|
{
|
|
iso14_pcb_blocknum ^= 1;
|
|
}
|
|
|
|
// if we received I-block with chaining we need to send ACK and receive another block of data
|
|
if (res)
|
|
*res = data_bytes[0];
|
|
|
|
// crc check
|
|
if (len >= 3 && !check_crc(CRC_14443_A, data_bytes, len)) {
|
|
return -1;
|
|
}
|
|
|
|
}
|
|
|
|
if (len) {
|
|
// cut frame byte
|
|
len -= 1;
|
|
// memmove(data_bytes, data_bytes + 1, len);
|
|
for (int i = 0; i < len; i++)
|
|
data_bytes[i] = data_bytes[i + 1];
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Read an ISO 14443a tag. Send out commands and store answers.
|
|
//-----------------------------------------------------------------------------
|
|
// arg0 iso_14a flags
|
|
// arg1 high :: number of bits, if you want to send 7bits etc
|
|
// low :: len of commandbytes
|
|
// arg2 timeout
|
|
// d.asBytes command bytes to send
|
|
void ReaderIso14443a(UsbCommand *c) {
|
|
iso14a_command_t param = c->arg[0];
|
|
size_t len = c->arg[1] & 0xffff;
|
|
size_t lenbits = c->arg[1] >> 16;
|
|
uint32_t timeout = c->arg[2];
|
|
uint8_t *cmd = c->d.asBytes;
|
|
uint32_t arg0 = 0;
|
|
uint8_t buf[USB_CMD_DATA_SIZE] = {0x00};
|
|
uint8_t par[MAX_PARITY_SIZE] = {0x00};
|
|
|
|
if ((param & ISO14A_CONNECT))
|
|
clear_trace();
|
|
|
|
set_tracing(true);
|
|
|
|
if ((param & ISO14A_REQUEST_TRIGGER))
|
|
iso14a_set_trigger(true);
|
|
|
|
if ((param & ISO14A_CONNECT)) {
|
|
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
|
|
|
|
// notify client selecting status.
|
|
// if failed selecting, turn off antenna and quite.
|
|
if( !(param & ISO14A_NO_SELECT) ) {
|
|
iso14a_card_select_t *card = (iso14a_card_select_t*)buf;
|
|
arg0 = iso14443a_select_card(NULL, card, NULL, true, 0, param & ISO14A_NO_RATS );
|
|
cmd_send(CMD_ACK, arg0, card->uidlen, 0, buf, sizeof(iso14a_card_select_t));
|
|
if ( arg0 == 0 )
|
|
goto OUT;
|
|
}
|
|
}
|
|
|
|
if ((param & ISO14A_SET_TIMEOUT))
|
|
iso14a_set_timeout(timeout);
|
|
|
|
if ((param & ISO14A_APDU)) {
|
|
uint8_t res;
|
|
arg0 = iso14_apdu(cmd, len, (param & ISO14A_SEND_CHAINING), buf, &res);
|
|
cmd_send(CMD_ACK, arg0, res, 0, buf, sizeof(buf));
|
|
}
|
|
|
|
if ((param & ISO14A_RAW)) {
|
|
|
|
if ((param & ISO14A_APPEND_CRC)) {
|
|
// Don't append crc on empty bytearray...
|
|
if ( len > 0 ) {
|
|
if ((param & ISO14A_TOPAZMODE))
|
|
AddCrc14B(cmd, len);
|
|
else
|
|
AddCrc14A(cmd, len);
|
|
|
|
len += 2;
|
|
if (lenbits) lenbits += 16;
|
|
}
|
|
}
|
|
|
|
if (lenbits > 0) { // want to send a specific number of bits (e.g. short commands)
|
|
if ((param & ISO14A_TOPAZMODE)) {
|
|
int bits_to_send = lenbits;
|
|
uint16_t i = 0;
|
|
ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 7), NULL, NULL); // first byte is always short (7bits) and no parity
|
|
bits_to_send -= 7;
|
|
while (bits_to_send > 0) {
|
|
ReaderTransmitBitsPar(&cmd[i++], MIN(bits_to_send, 8), NULL, NULL); // following bytes are 8 bit and no parity
|
|
bits_to_send -= 8;
|
|
}
|
|
} else {
|
|
GetParity(cmd, lenbits/8, par);
|
|
ReaderTransmitBitsPar(cmd, lenbits, par, NULL); // bytes are 8 bit with odd parity
|
|
}
|
|
} else { // want to send complete bytes only
|
|
if ((param & ISO14A_TOPAZMODE)) {
|
|
uint16_t i = 0;
|
|
ReaderTransmitBitsPar(&cmd[i++], 7, NULL, NULL); // first byte: 7 bits, no paritiy
|
|
while (i < len) {
|
|
ReaderTransmitBitsPar(&cmd[i++], 8, NULL, NULL); // following bytes: 8 bits, no paritiy
|
|
}
|
|
} else {
|
|
ReaderTransmit(cmd, len, NULL); // 8 bits, odd parity
|
|
}
|
|
}
|
|
arg0 = ReaderReceive(buf, par);
|
|
cmd_send(CMD_ACK, arg0, 0, 0, buf, sizeof(buf));
|
|
}
|
|
|
|
if ((param & ISO14A_REQUEST_TRIGGER))
|
|
iso14a_set_trigger(false);
|
|
|
|
if ((param & ISO14A_NO_DISCONNECT))
|
|
return;
|
|
|
|
OUT:
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
|
|
set_tracing(false);
|
|
LEDsoff();
|
|
}
|
|
|
|
// Determine the distance between two nonces.
|
|
// Assume that the difference is small, but we don't know which is first.
|
|
// Therefore try in alternating directions.
|
|
int32_t dist_nt(uint32_t nt1, uint32_t nt2) {
|
|
|
|
if (nt1 == nt2) return 0;
|
|
|
|
uint32_t nttmp1 = nt1;
|
|
uint32_t nttmp2 = nt2;
|
|
|
|
for (uint16_t i = 1; i < 32768; i++) {
|
|
nttmp1 = prng_successor(nttmp1, 1);
|
|
if (nttmp1 == nt2) return i;
|
|
|
|
nttmp2 = prng_successor(nttmp2, 1);
|
|
if (nttmp2 == nt1) return -i;
|
|
}
|
|
|
|
return(-99999); // either nt1 or nt2 are invalid nonces
|
|
}
|
|
|
|
|
|
#define PRNG_SEQUENCE_LENGTH (1 << 16)
|
|
#define MAX_UNEXPECTED_RANDOM 4 // maximum number of unexpected (i.e. real) random numbers when trying to sync. Then give up.
|
|
#define MAX_SYNC_TRIES 32
|
|
|
|
//-----------------------------------------------------------------------------
|
|
// Recover several bits of the cypher stream. This implements (first stages of)
|
|
// the algorithm described in "The Dark Side of Security by Obscurity and
|
|
// Cloning MiFare Classic Rail and Building Passes, Anywhere, Anytime"
|
|
// (article by Nicolas T. Courtois, 2009)
|
|
//-----------------------------------------------------------------------------
|
|
void ReaderMifare(bool first_try, uint8_t block, uint8_t keytype ) {
|
|
|
|
iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
|
|
|
|
BigBuf_free(); BigBuf_Clear_ext(false);
|
|
clear_trace();
|
|
set_tracing(true);
|
|
|
|
uint8_t mf_auth[] = { keytype, block, 0x00, 0x00 };
|
|
uint8_t mf_nr_ar[] = {0,0,0,0,0,0,0,0};
|
|
uint8_t uid[10] = {0,0,0,0,0,0,0,0,0,0};
|
|
uint8_t par_list[8] = {0,0,0,0,0,0,0,0};
|
|
uint8_t ks_list[8] = {0,0,0,0,0,0,0,0};
|
|
uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE] = {0x00};
|
|
uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE] = {0x00};
|
|
uint8_t par[1] = {0}; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough
|
|
uint8_t nt_diff = 0;
|
|
|
|
uint32_t nt = 0, previous_nt = 0, cuid = 0;
|
|
uint32_t sync_time = GetCountSspClk() & 0xfffffff8;
|
|
|
|
int32_t catch_up_cycles = 0;
|
|
int32_t last_catch_up = 0;
|
|
int32_t isOK = 0;
|
|
|
|
uint16_t elapsed_prng_sequences = 1;
|
|
uint16_t consecutive_resyncs = 0;
|
|
uint16_t unexpected_random = 0;
|
|
uint16_t sync_tries = 0;
|
|
|
|
bool have_uid = false;
|
|
bool received_nack;
|
|
uint8_t cascade_levels = 0;
|
|
|
|
// static variables here, is re-used in the next call
|
|
static uint32_t nt_attacked = 0;
|
|
static int32_t sync_cycles = 0;
|
|
static uint8_t par_low = 0;
|
|
static uint8_t mf_nr_ar3 = 0;
|
|
|
|
AddCrc14A(mf_auth, 2);
|
|
|
|
if (first_try) {
|
|
sync_cycles = PRNG_SEQUENCE_LENGTH; // Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces).
|
|
nt_attacked = 0;
|
|
mf_nr_ar3 = 0;
|
|
par_low = 0;
|
|
} else {
|
|
// we were unsuccessful on a previous call.
|
|
// Try another READER nonce (first 3 parity bits remain the same)
|
|
mf_nr_ar3++;
|
|
mf_nr_ar[3] = mf_nr_ar3;
|
|
par[0] = par_low;
|
|
}
|
|
|
|
LED_C_ON();
|
|
uint16_t i;
|
|
for (i = 0; true; ++i) {
|
|
|
|
received_nack = false;
|
|
|
|
WDT_HIT();
|
|
|
|
// Test if the action was cancelled
|
|
if (BUTTON_PRESS()) {
|
|
isOK = -1;
|
|
break;
|
|
}
|
|
|
|
// this part is from Piwi's faster nonce collecting part in Hardnested.
|
|
if (!have_uid) { // need a full select cycle to get the uid first
|
|
iso14a_card_select_t card_info;
|
|
if (!iso14443a_select_card(uid, &card_info, &cuid, true, 0, true)) {
|
|
if (MF_DBGLEVEL >= 1) Dbprintf("Mifare: Can't select card (ALL)");
|
|
continue;
|
|
}
|
|
switch (card_info.uidlen) {
|
|
case 4 : cascade_levels = 1; break;
|
|
case 7 : cascade_levels = 2; break;
|
|
case 10: cascade_levels = 3; break;
|
|
default: break;
|
|
}
|
|
have_uid = true;
|
|
} else { // no need for anticollision. We can directly select the card
|
|
if (!iso14443a_fast_select_card(uid, cascade_levels)) {
|
|
if (MF_DBGLEVEL >= 1) Dbprintf("Mifare: Can't select card (UID)");
|
|
continue;
|
|
}
|
|
}
|
|
|
|
elapsed_prng_sequences = 1;
|
|
|
|
// Sending timeslot of ISO14443a frame
|
|
sync_time = (sync_time & 0xfffffff8 ) + sync_cycles + catch_up_cycles;
|
|
catch_up_cycles = 0;
|
|
|
|
#define SYNC_TIME_BUFFER 16 // if there is only SYNC_TIME_BUFFER left before next planned sync, wait for next PRNG cycle
|
|
|
|
// if we missed the sync time already or are about to miss it, advance to the next nonce repeat
|
|
while ( sync_time < GetCountSspClk() + SYNC_TIME_BUFFER) {
|
|
++elapsed_prng_sequences;
|
|
sync_time = (sync_time & 0xfffffff8 ) + sync_cycles;
|
|
}
|
|
|
|
// Transmit MIFARE_CLASSIC_AUTH at synctime. Should result in returning the same tag nonce (== nt_attacked)
|
|
ReaderTransmit(mf_auth, sizeof(mf_auth), &sync_time);
|
|
|
|
// Receive the (4 Byte) "random" TAG nonce
|
|
if (!ReaderReceive(receivedAnswer, receivedAnswerPar))
|
|
continue;
|
|
|
|
previous_nt = nt;
|
|
nt = bytes_to_num(receivedAnswer, 4);
|
|
|
|
// Transmit reader nonce with fake par
|
|
ReaderTransmitPar(mf_nr_ar, sizeof(mf_nr_ar), par, NULL);
|
|
|
|
// Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding
|
|
if (ReaderReceive(receivedAnswer, receivedAnswerPar))
|
|
received_nack = true;
|
|
|
|
// we didn't calibrate our clock yet,
|
|
// iceman: has to be calibrated every time.
|
|
if (previous_nt && !nt_attacked) {
|
|
|
|
int nt_distance = dist_nt(previous_nt, nt);
|
|
|
|
// if no distance between, then we are in sync.
|
|
if (nt_distance == 0) {
|
|
nt_attacked = nt;
|
|
} else {
|
|
if (nt_distance == -99999) { // invalid nonce received
|
|
unexpected_random++;
|
|
if (unexpected_random > MAX_UNEXPECTED_RANDOM) {
|
|
isOK = -3; // Card has an unpredictable PRNG. Give up
|
|
break;
|
|
} else {
|
|
continue; // continue trying...
|
|
}
|
|
}
|
|
|
|
if (++sync_tries > MAX_SYNC_TRIES) {
|
|
isOK = -4; // Card's PRNG runs at an unexpected frequency or resets unexpectedly
|
|
break;
|
|
}
|
|
|
|
sync_cycles = (sync_cycles - nt_distance)/elapsed_prng_sequences;
|
|
|
|
// no negative sync_cycles
|
|
if (sync_cycles <= 0) sync_cycles += PRNG_SEQUENCE_LENGTH;
|
|
|
|
// reset sync_cycles
|
|
if (sync_cycles > PRNG_SEQUENCE_LENGTH * 2 ) {
|
|
sync_cycles = PRNG_SEQUENCE_LENGTH;
|
|
sync_time = GetCountSspClk() & 0xfffffff8;
|
|
}
|
|
|
|
if (MF_DBGLEVEL >= 4)
|
|
Dbprintf("calibrating in cycle %d. nt_distance=%d, elapsed_prng_sequences=%d, new sync_cycles: %d\n", i, nt_distance, elapsed_prng_sequences, sync_cycles);
|
|
|
|
LED_B_OFF();
|
|
continue;
|
|
}
|
|
}
|
|
LED_B_OFF();
|
|
|
|
if ( (nt != nt_attacked) && nt_attacked) { // we somehow lost sync. Try to catch up again...
|
|
|
|
catch_up_cycles = -dist_nt(nt_attacked, nt);
|
|
if (catch_up_cycles == 99999) { // invalid nonce received. Don't resync on that one.
|
|
catch_up_cycles = 0;
|
|
continue;
|
|
}
|
|
// average?
|
|
catch_up_cycles /= elapsed_prng_sequences;
|
|
|
|
if (catch_up_cycles == last_catch_up) {
|
|
consecutive_resyncs++;
|
|
} else {
|
|
last_catch_up = catch_up_cycles;
|
|
consecutive_resyncs = 0;
|
|
}
|
|
|
|
if (consecutive_resyncs < 3) {
|
|
if (MF_DBGLEVEL >= 4) {
|
|
Dbprintf("Lost sync in cycle %d. nt_distance=%d. Consecutive Resyncs = %d. Trying one time catch up...\n", i, catch_up_cycles, consecutive_resyncs);
|
|
}
|
|
} else {
|
|
sync_cycles += catch_up_cycles;
|
|
|
|
if (MF_DBGLEVEL >= 4)
|
|
Dbprintf("Lost sync in cycle %d for the fourth time consecutively (nt_distance = %d). Adjusting sync_cycles to %d.\n", i, catch_up_cycles, sync_cycles);
|
|
|
|
last_catch_up = 0;
|
|
catch_up_cycles = 0;
|
|
consecutive_resyncs = 0;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
// Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding
|
|
if (received_nack) {
|
|
catch_up_cycles = 8; // the PRNG is delayed by 8 cycles due to the NAC (4Bits = 0x05 encrypted) transfer
|
|
|
|
if (nt_diff == 0)
|
|
par_low = par[0] & 0xE0; // there is no need to check all parities for other nt_diff. Parity Bits for mf_nr_ar[0..2] won't change
|
|
|
|
par_list[nt_diff] = reflect8(par[0]);
|
|
ks_list[nt_diff] = receivedAnswer[0] ^ 0x05; // xor with NACK value to get keystream
|
|
|
|
// Test if the information is complete
|
|
if (nt_diff == 0x07) {
|
|
isOK = 1;
|
|
break;
|
|
}
|
|
|
|
nt_diff = (nt_diff + 1) & 0x07;
|
|
mf_nr_ar[3] = (mf_nr_ar[3] & 0x1F) | (nt_diff << 5);
|
|
par[0] = par_low;
|
|
|
|
} else {
|
|
// No NACK.
|
|
if (nt_diff == 0 && first_try) {
|
|
par[0]++;
|
|
if (par[0] == 0) { // tried all 256 possible parities without success. Card doesn't send NACK.
|
|
isOK = -2;
|
|
break;
|
|
}
|
|
} else {
|
|
// Why this?
|
|
par[0] = ((par[0] & 0x1F) + 1) | par_low;
|
|
}
|
|
}
|
|
|
|
// reset the resyncs since we got a complete transaction on right time.
|
|
consecutive_resyncs = 0;
|
|
} // end for loop
|
|
|
|
mf_nr_ar[3] &= 0x1F;
|
|
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("Number of sent auth requestes: %u", i);
|
|
|
|
uint8_t buf[32] = {0x00};
|
|
memset(buf, 0x00, sizeof(buf));
|
|
num_to_bytes(cuid, 4, buf);
|
|
num_to_bytes(nt, 4, buf + 4);
|
|
memcpy(buf + 8, par_list, 8);
|
|
memcpy(buf + 16, ks_list, 8);
|
|
memcpy(buf + 24, mf_nr_ar, 8);
|
|
|
|
cmd_send(CMD_ACK, isOK, 0, 0, buf, sizeof(buf) );
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
|
|
LEDsoff();
|
|
set_tracing(false);
|
|
}
|
|
|
|
/*
|
|
* Mifare Classic NACK-bug detection
|
|
* Thanks to @doegox for the feedback and new approaches.
|
|
*/
|
|
void DetectNACKbug() {
|
|
uint8_t mf_auth[] = {0x60, 0x00, 0xF5, 0x7B};
|
|
uint8_t mf_nr_ar[] = {0,0,0,0,0,0,0,0};
|
|
uint8_t uid[10] = {0,0,0,0,0,0,0,0,0,0};
|
|
uint8_t receivedAnswer[MAX_MIFARE_FRAME_SIZE] = {0x00};
|
|
uint8_t receivedAnswerPar[MAX_MIFARE_PARITY_SIZE] = {0x00};
|
|
uint8_t par[1] = {0}; // maximum 8 Bytes to be sent here, 1 byte parity is therefore enough
|
|
|
|
uint32_t nt = 0, previous_nt = 0, nt_attacked = 0, cuid = 0;
|
|
int32_t isOK = 0, catch_up_cycles = 0, last_catch_up = 0;
|
|
uint8_t cascade_levels = 0, num_nacks = 0;
|
|
uint16_t elapsed_prng_sequences = 1;
|
|
uint16_t consecutive_resyncs = 0;
|
|
uint16_t unexpected_random = 0;
|
|
uint16_t sync_tries = 0;
|
|
uint32_t sync_time = 0;
|
|
bool have_uid = false;
|
|
bool received_nack;
|
|
|
|
// Mifare Classic's random generator repeats every 2^16 cycles (and so do the nonces).
|
|
uint32_t sync_cycles = PRNG_SEQUENCE_LENGTH;
|
|
|
|
BigBuf_free(); BigBuf_Clear_ext(false);
|
|
clear_trace();
|
|
set_tracing(true);
|
|
iso14443a_setup(FPGA_HF_ISO14443A_READER_MOD);
|
|
|
|
sync_time = GetCountSspClk() & 0xfffffff8;
|
|
|
|
LED_C_ON();
|
|
uint16_t i;
|
|
for (i = 1; true; ++i) {
|
|
|
|
received_nack = false;
|
|
|
|
// Cards always leaks a NACK, no matter the parity
|
|
if ((i==10) && (num_nacks == i-1)) {
|
|
isOK = 2;
|
|
break;
|
|
}
|
|
|
|
WDT_HIT();
|
|
|
|
// Test if the action was cancelled
|
|
if (BUTTON_PRESS()) {
|
|
isOK = 99;
|
|
break;
|
|
}
|
|
|
|
// this part is from Piwi's faster nonce collecting part in Hardnested.
|
|
if (!have_uid) { // need a full select cycle to get the uid first
|
|
iso14a_card_select_t card_info;
|
|
if (!iso14443a_select_card(uid, &card_info, &cuid, true, 0, true)) {
|
|
if (MF_DBGLEVEL >= 1) Dbprintf("Mifare: Can't select card (ALL)");
|
|
continue;
|
|
}
|
|
switch (card_info.uidlen) {
|
|
case 4 : cascade_levels = 1; break;
|
|
case 7 : cascade_levels = 2; break;
|
|
case 10: cascade_levels = 3; break;
|
|
default: break;
|
|
}
|
|
have_uid = true;
|
|
} else { // no need for anticollision. We can directly select the card
|
|
if (!iso14443a_fast_select_card(uid, cascade_levels)) {
|
|
if (MF_DBGLEVEL >= 1) Dbprintf("Mifare: Can't select card (UID)");
|
|
continue;
|
|
}
|
|
}
|
|
|
|
elapsed_prng_sequences = 1;
|
|
|
|
// Sending timeslot of ISO14443a frame
|
|
sync_time = (sync_time & 0xfffffff8 ) + sync_cycles + catch_up_cycles;
|
|
catch_up_cycles = 0;
|
|
|
|
// if we missed the sync time already, advance to the next nonce repeat
|
|
while ( GetCountSspClk() > sync_time) {
|
|
++elapsed_prng_sequences;
|
|
sync_time = (sync_time & 0xfffffff8 ) + sync_cycles;
|
|
}
|
|
|
|
// Transmit MIFARE_CLASSIC_AUTH at synctime. Should result in returning the same tag nonce (== nt_attacked)
|
|
ReaderTransmit(mf_auth, sizeof(mf_auth), &sync_time);
|
|
|
|
// Receive the (4 Byte) "random" TAG nonce
|
|
if (!ReaderReceive(receivedAnswer, receivedAnswerPar))
|
|
continue;
|
|
|
|
previous_nt = nt;
|
|
nt = bytes_to_num(receivedAnswer, 4);
|
|
|
|
// Transmit reader nonce with fake par
|
|
ReaderTransmitPar(mf_nr_ar, sizeof(mf_nr_ar), par, NULL);
|
|
|
|
if (ReaderReceive(receivedAnswer, receivedAnswerPar)) {
|
|
received_nack = true;
|
|
num_nacks++;
|
|
// ALWAYS leak Detection.
|
|
if ( i == num_nacks ) {
|
|
continue;
|
|
}
|
|
}
|
|
|
|
// we didn't calibrate our clock yet,
|
|
// iceman: has to be calibrated every time.
|
|
if (previous_nt && !nt_attacked) {
|
|
|
|
int nt_distance = dist_nt(previous_nt, nt);
|
|
|
|
// if no distance between, then we are in sync.
|
|
if (nt_distance == 0) {
|
|
nt_attacked = nt;
|
|
} else {
|
|
if (nt_distance == -99999) { // invalid nonce received
|
|
unexpected_random++;
|
|
if (unexpected_random > MAX_UNEXPECTED_RANDOM ) {
|
|
// Card has an unpredictable PRNG. Give up
|
|
isOK = 98;
|
|
break;
|
|
} else {
|
|
if (sync_cycles <= 0) {
|
|
sync_cycles += PRNG_SEQUENCE_LENGTH;
|
|
}
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if (++sync_tries > MAX_SYNC_TRIES) {
|
|
isOK = 97; // Card's PRNG runs at an unexpected frequency or resets unexpectedly
|
|
break;
|
|
}
|
|
|
|
sync_cycles = (sync_cycles - nt_distance)/elapsed_prng_sequences;
|
|
|
|
if (sync_cycles <= 0)
|
|
sync_cycles += PRNG_SEQUENCE_LENGTH;
|
|
|
|
if (sync_cycles > PRNG_SEQUENCE_LENGTH * 2 ) {
|
|
isOK = 96; // Card's PRNG runs at an unexpected frequency or resets unexpectedly
|
|
break;
|
|
}
|
|
|
|
if (MF_DBGLEVEL >= 4)
|
|
Dbprintf("calibrating in cycle %d. nt_distance=%d, elapsed_prng_sequences=%d, new sync_cycles: %d\n", i, nt_distance, elapsed_prng_sequences, sync_cycles);
|
|
|
|
continue;
|
|
}
|
|
}
|
|
|
|
if ( (nt != nt_attacked) && nt_attacked) {
|
|
// we somehow lost sync. Try to catch up again...
|
|
catch_up_cycles = -dist_nt(nt_attacked, nt);
|
|
|
|
if (catch_up_cycles == 99999) {
|
|
// invalid nonce received. Don't resync on that one.
|
|
catch_up_cycles = 0;
|
|
continue;
|
|
}
|
|
// average?
|
|
catch_up_cycles /= elapsed_prng_sequences;
|
|
|
|
if (catch_up_cycles == last_catch_up) {
|
|
consecutive_resyncs++;
|
|
} else {
|
|
last_catch_up = catch_up_cycles;
|
|
consecutive_resyncs = 0;
|
|
}
|
|
|
|
if (consecutive_resyncs < 3) {
|
|
if (MF_DBGLEVEL >= 4) {
|
|
Dbprintf("Lost sync in cycle %d. nt_distance=%d. Consecutive Resyncs = %d. Trying one time catch up...\n", i, catch_up_cycles, consecutive_resyncs);
|
|
}
|
|
} else {
|
|
sync_cycles += catch_up_cycles;
|
|
|
|
if (MF_DBGLEVEL >= 4) {
|
|
Dbprintf("Lost sync in cycle %d for the fourth time consecutively (nt_distance = %d). Adjusting sync_cycles to %d.\n", i, catch_up_cycles, sync_cycles);
|
|
Dbprintf("nt [%08x] attacted [%08x]", nt, nt_attacked );
|
|
}
|
|
last_catch_up = 0;
|
|
catch_up_cycles = 0;
|
|
consecutive_resyncs = 0;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
// Receive answer. This will be a 4 Bit NACK when the 8 parity bits are OK after decoding
|
|
if (received_nack)
|
|
catch_up_cycles = 8; // the PRNG is delayed by 8 cycles due to the NAC (4Bits = 0x05 encrypted) transfer
|
|
|
|
// we are testing all 256 possibilities.
|
|
par[0]++;
|
|
|
|
// tried all 256 possible parities without success.
|
|
if (par[0] == 0) {
|
|
if ( num_nacks == 1 )
|
|
isOK = 1;
|
|
break;
|
|
}
|
|
|
|
// reset the resyncs since we got a complete transaction on right time.
|
|
consecutive_resyncs = 0;
|
|
} // end for loop
|
|
|
|
// num_nacks = number of nacks recieved. should be only 1. if not its a clone card which always sends NACK (parity == 0) ?
|
|
// i = number of authentications sent. Not always 256, since we are trying to sync but close to it.
|
|
cmd_send(CMD_ACK, isOK, num_nacks, i, 0, 0 );
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
|
|
LEDsoff();
|
|
set_tracing(false);
|
|
}
|
|
|
|
/**
|
|
*MIFARE 1K simulate.
|
|
*
|
|
*@param flags :
|
|
* FLAG_INTERACTIVE - In interactive mode, we are expected to finish the operation with an ACK
|
|
* FLAG_4B_UID_IN_DATA - use 4-byte UID in the data-section
|
|
* FLAG_7B_UID_IN_DATA - use 7-byte UID in the data-section
|
|
* FLAG_10B_UID_IN_DATA - use 10-byte UID in the data-section
|
|
* FLAG_UID_IN_EMUL - use 4-byte UID from emulator memory
|
|
* FLAG_NR_AR_ATTACK - collect NR_AR responses for bruteforcing later
|
|
*@param exitAfterNReads, exit simulation after n blocks have been read, 0 is inifite
|
|
* (unless reader attack mode enabled then it runs util it gets enough nonces to recover all keys attmpted)
|
|
*/
|
|
void Mifare1ksim(uint8_t flags, uint8_t exitAfterNReads, uint8_t arg2, uint8_t *datain) {
|
|
|
|
int cardSTATE = MFEMUL_NOFIELD;
|
|
int _UID_LEN = 0; // 4, 7, 10
|
|
int vHf = 0; // in mV
|
|
int res = 0;
|
|
uint32_t selTimer = 0;
|
|
uint32_t authTimer = 0;
|
|
uint16_t len = 0;
|
|
uint8_t cardWRBL = 0;
|
|
uint8_t cardAUTHSC = 0;
|
|
uint8_t cardAUTHKEY = 0xff; // no authentication
|
|
uint32_t cuid = 0;
|
|
uint32_t ans = 0;
|
|
uint32_t cardINTREG = 0;
|
|
uint8_t cardINTBLOCK = 0;
|
|
struct Crypto1State mpcs = {0, 0};
|
|
struct Crypto1State *pcs;
|
|
pcs = &mpcs;
|
|
uint32_t numReads = 0; // Counts numer of times reader read a block
|
|
uint8_t receivedCmd[MAX_MIFARE_FRAME_SIZE] = {0x00};
|
|
uint8_t receivedCmd_par[MAX_MIFARE_PARITY_SIZE] = {0x00};
|
|
uint8_t response[MAX_MIFARE_FRAME_SIZE] = {0x00};
|
|
uint8_t response_par[MAX_MIFARE_PARITY_SIZE] = {0x00};
|
|
|
|
uint8_t atqa[] = {0x04, 0x00}; // Mifare classic 1k
|
|
uint8_t sak_4[] = {0x0C, 0x00, 0x00}; // CL1 - 4b uid
|
|
uint8_t sak_7[] = {0x0C, 0x00, 0x00}; // CL2 - 7b uid
|
|
uint8_t sak_10[] = {0x0C, 0x00, 0x00}; // CL3 - 10b uid
|
|
// uint8_t sak[] = {0x09, 0x3f, 0xcc }; // Mifare Mini
|
|
|
|
uint8_t rUIDBCC1[] = {0xde, 0xad, 0xbe, 0xaf, 0x62};
|
|
uint8_t rUIDBCC2[] = {0xde, 0xad, 0xbe, 0xaf, 0x62};
|
|
uint8_t rUIDBCC3[] = {0xde, 0xad, 0xbe, 0xaf, 0x62};
|
|
|
|
// TAG Nonce - Authenticate response
|
|
uint8_t rAUTH_NT[4];
|
|
uint32_t nonce = prng_successor( GetTickCount(), 32 );
|
|
num_to_bytes(nonce, 4, rAUTH_NT);
|
|
|
|
// uint8_t rAUTH_NT[] = {0x55, 0x41, 0x49, 0x92};// nonce from nested? why this?
|
|
uint8_t rAUTH_AT[] = {0x00, 0x00, 0x00, 0x00};
|
|
|
|
// Here, we collect CUID, NT, NR, AR, CUID2, NT2, NR2, AR2
|
|
// This can be used in a reader-only attack.
|
|
nonces_t ar_nr_nonces[ATTACK_KEY_COUNT];
|
|
memset(ar_nr_nonces, 0x00, sizeof(ar_nr_nonces));
|
|
|
|
// -- Determine the UID
|
|
// Can be set from emulator memory or incoming data
|
|
// Length: 4,7,or 10 bytes
|
|
if ( (flags & FLAG_UID_IN_EMUL) == FLAG_UID_IN_EMUL)
|
|
emlGetMemBt(datain, 0, 10); // load 10bytes from EMUL to the datain pointer. to be used below.
|
|
|
|
if ( (flags & FLAG_4B_UID_IN_DATA) == FLAG_4B_UID_IN_DATA) {
|
|
memcpy(rUIDBCC1, datain, 4);
|
|
_UID_LEN = 4;
|
|
} else if ( (flags & FLAG_7B_UID_IN_DATA) == FLAG_7B_UID_IN_DATA) {
|
|
memcpy(&rUIDBCC1[1], datain, 3);
|
|
memcpy( rUIDBCC2, datain+3, 4);
|
|
_UID_LEN = 7;
|
|
} else if ( (flags & FLAG_10B_UID_IN_DATA) == FLAG_10B_UID_IN_DATA) {
|
|
memcpy(&rUIDBCC1[1], datain, 3);
|
|
memcpy(&rUIDBCC2[1], datain+3, 3);
|
|
memcpy( rUIDBCC3, datain+6, 4);
|
|
_UID_LEN = 10;
|
|
}
|
|
|
|
switch (_UID_LEN) {
|
|
case 4:
|
|
sak_4[0] &= 0xFB;
|
|
// save CUID
|
|
cuid = bytes_to_num(rUIDBCC1, 4);
|
|
// BCC
|
|
rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
|
|
if (MF_DBGLEVEL >= 2) {
|
|
Dbprintf("4B UID: %02x%02x%02x%02x",
|
|
rUIDBCC1[0],
|
|
rUIDBCC1[1],
|
|
rUIDBCC1[2],
|
|
rUIDBCC1[3]
|
|
);
|
|
}
|
|
break;
|
|
case 7:
|
|
atqa[0] |= 0x40;
|
|
sak_7[0] &= 0xFB;
|
|
// save CUID
|
|
cuid = bytes_to_num(rUIDBCC2, 4);
|
|
// CascadeTag, CT
|
|
rUIDBCC1[0] = 0x88;
|
|
// BCC
|
|
rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
|
|
rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
|
|
if (MF_DBGLEVEL >= 2) {
|
|
Dbprintf("7B UID: %02x %02x %02x %02x %02x %02x %02x",
|
|
rUIDBCC1[1],
|
|
rUIDBCC1[2],
|
|
rUIDBCC1[3],
|
|
rUIDBCC2[0],
|
|
rUIDBCC2[1],
|
|
rUIDBCC2[2],
|
|
rUIDBCC2[3]
|
|
);
|
|
}
|
|
break;
|
|
case 10:
|
|
atqa[0] |= 0x80;
|
|
sak_10[0] &= 0xFB;
|
|
// save CUID
|
|
cuid = bytes_to_num(rUIDBCC3, 4);
|
|
// CascadeTag, CT
|
|
rUIDBCC1[0] = 0x88;
|
|
rUIDBCC2[0] = 0x88;
|
|
// BCC
|
|
rUIDBCC1[4] = rUIDBCC1[0] ^ rUIDBCC1[1] ^ rUIDBCC1[2] ^ rUIDBCC1[3];
|
|
rUIDBCC2[4] = rUIDBCC2[0] ^ rUIDBCC2[1] ^ rUIDBCC2[2] ^ rUIDBCC2[3];
|
|
rUIDBCC3[4] = rUIDBCC3[0] ^ rUIDBCC3[1] ^ rUIDBCC3[2] ^ rUIDBCC3[3];
|
|
|
|
if (MF_DBGLEVEL >= 2) {
|
|
Dbprintf("10B UID: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
|
|
rUIDBCC1[1],
|
|
rUIDBCC1[2],
|
|
rUIDBCC1[3],
|
|
rUIDBCC2[1],
|
|
rUIDBCC2[2],
|
|
rUIDBCC2[3],
|
|
rUIDBCC3[0],
|
|
rUIDBCC3[1],
|
|
rUIDBCC3[2],
|
|
rUIDBCC3[3]
|
|
);
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
// calc some crcs
|
|
compute_crc(CRC_14443_A, sak_4, 1, &sak_4[1], &sak_4[2]);
|
|
compute_crc(CRC_14443_A, sak_7, 1, &sak_7[1], &sak_7[2]);
|
|
compute_crc(CRC_14443_A, sak_10, 1, &sak_10[1], &sak_10[2]);
|
|
|
|
// We need to listen to the high-frequency, peak-detected path.
|
|
iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
|
|
|
// free eventually allocated BigBuf memory but keep Emulator Memory
|
|
BigBuf_free_keep_EM();
|
|
clear_trace();
|
|
set_tracing(true);
|
|
LED_D_ON();
|
|
|
|
bool finished = false;
|
|
while (!BUTTON_PRESS() && !finished && !usb_poll_validate_length()) {
|
|
WDT_HIT();
|
|
|
|
// find reader field
|
|
if (cardSTATE == MFEMUL_NOFIELD) {
|
|
|
|
vHf = (MAX_ADC_HF_VOLTAGE * AvgAdc(ADC_CHAN_HF)) >> 10;
|
|
if (vHf > MF_MINFIELDV) {
|
|
cardSTATE_TO_IDLE();
|
|
LED_A_ON();
|
|
}
|
|
}
|
|
if (cardSTATE == MFEMUL_NOFIELD) continue;
|
|
|
|
// Now, get data
|
|
res = EmGetCmd(receivedCmd, &len, receivedCmd_par);
|
|
if (res == 2) { //Field is off!
|
|
cardSTATE = MFEMUL_NOFIELD;
|
|
LEDsoff();
|
|
continue;
|
|
} else if (res == 1) {
|
|
break; // return value 1 means button press
|
|
}
|
|
|
|
// REQ or WUP request in ANY state and WUP in HALTED state
|
|
// this if-statement doesn't match the specification above. (iceman)
|
|
if (len == 1 && ((receivedCmd[0] == ISO14443A_CMD_REQA && cardSTATE != MFEMUL_HALTED) || receivedCmd[0] == ISO14443A_CMD_WUPA)) {
|
|
selTimer = GetTickCount();
|
|
EmSendCmd(atqa, sizeof(atqa));
|
|
cardSTATE = MFEMUL_SELECT1;
|
|
crypto1_destroy(pcs);
|
|
cardAUTHKEY = 0xff;
|
|
nonce = prng_successor(selTimer, 32);
|
|
continue;
|
|
}
|
|
|
|
switch (cardSTATE) {
|
|
case MFEMUL_NOFIELD:
|
|
case MFEMUL_HALTED:
|
|
case MFEMUL_IDLE:{
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
case MFEMUL_SELECT1:{
|
|
if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT && receivedCmd[1] == 0x20)) {
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("SELECT ALL received");
|
|
EmSendCmd(rUIDBCC1, sizeof(rUIDBCC1));
|
|
break;
|
|
}
|
|
// select card
|
|
if (len == 9 &&
|
|
( receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT &&
|
|
receivedCmd[1] == 0x70 &&
|
|
memcmp(&receivedCmd[2], rUIDBCC1, 4) == 0)) {
|
|
|
|
// SAK 4b
|
|
EmSendCmd(sak_4, sizeof(sak_4));
|
|
switch(_UID_LEN){
|
|
case 4:
|
|
cardSTATE = MFEMUL_WORK;
|
|
LED_B_ON();
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol1 time: %d", GetTickCount() - selTimer);
|
|
continue;
|
|
case 7:
|
|
case 10:
|
|
cardSTATE = MFEMUL_SELECT2;
|
|
continue;
|
|
default:break;
|
|
}
|
|
} else {
|
|
cardSTATE_TO_IDLE();
|
|
}
|
|
break;
|
|
}
|
|
case MFEMUL_SELECT2:{
|
|
if (!len) {
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 && receivedCmd[1] == 0x20)) {
|
|
EmSendCmd(rUIDBCC2, sizeof(rUIDBCC2));
|
|
break;
|
|
}
|
|
if (len == 9 &&
|
|
(receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_2 &&
|
|
receivedCmd[1] == 0x70 &&
|
|
memcmp(&receivedCmd[2], rUIDBCC2, 4) == 0) ) {
|
|
|
|
EmSendCmd(sak_7, sizeof(sak_7));
|
|
switch(_UID_LEN){
|
|
case 7:
|
|
cardSTATE = MFEMUL_WORK;
|
|
LED_B_ON();
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol2 time: %d", GetTickCount() - selTimer);
|
|
continue;
|
|
case 10:
|
|
cardSTATE = MFEMUL_SELECT3;
|
|
continue;
|
|
default:break;
|
|
}
|
|
}
|
|
cardSTATE_TO_IDLE();
|
|
break;
|
|
}
|
|
case MFEMUL_SELECT3:{
|
|
if (!len) {
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
if (len == 2 && (receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 && receivedCmd[1] == 0x20)) {
|
|
EmSendCmd(rUIDBCC3, sizeof(rUIDBCC3));
|
|
break;
|
|
}
|
|
if (len == 9 &&
|
|
(receivedCmd[0] == ISO14443A_CMD_ANTICOLL_OR_SELECT_3 &&
|
|
receivedCmd[1] == 0x70 &&
|
|
memcmp(&receivedCmd[2], rUIDBCC3, 4) == 0) ) {
|
|
|
|
EmSendCmd(sak_10, sizeof(sak_10));
|
|
cardSTATE = MFEMUL_WORK;
|
|
LED_B_ON();
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("--> WORK. anticol3 time: %d", GetTickCount() - selTimer);
|
|
break;
|
|
}
|
|
cardSTATE_TO_IDLE();
|
|
break;
|
|
}
|
|
case MFEMUL_AUTH1:{
|
|
if( len != 8) {
|
|
cardSTATE_TO_IDLE();
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
|
|
uint32_t nr = bytes_to_num(receivedCmd, 4);
|
|
uint32_t ar = bytes_to_num(&receivedCmd[4], 4);
|
|
|
|
// Collect AR/NR per keytype & sector
|
|
if ( (flags & FLAG_NR_AR_ATTACK) == FLAG_NR_AR_ATTACK ) {
|
|
|
|
int8_t index = -1;
|
|
int8_t empty = -1;
|
|
for (uint8_t i = 0; i < ATTACK_KEY_COUNT; i++) {
|
|
// find which index to use
|
|
if ( (cardAUTHSC == ar_nr_nonces[i].sector) && (cardAUTHKEY == ar_nr_nonces[i].keytype))
|
|
index = i;
|
|
|
|
// keep track of empty slots.
|
|
if ( ar_nr_nonces[i].state == EMPTY)
|
|
empty = i;
|
|
}
|
|
// if no empty slots. Choose first and overwrite.
|
|
if ( index == -1 ) {
|
|
if ( empty == -1 ) {
|
|
index = 0;
|
|
ar_nr_nonces[index].state = EMPTY;
|
|
} else {
|
|
index = empty;
|
|
}
|
|
}
|
|
|
|
switch(ar_nr_nonces[index].state) {
|
|
case EMPTY: {
|
|
// first nonce collect
|
|
ar_nr_nonces[index].cuid = cuid;
|
|
ar_nr_nonces[index].sector = cardAUTHSC;
|
|
ar_nr_nonces[index].keytype = cardAUTHKEY;
|
|
ar_nr_nonces[index].nonce = nonce;
|
|
ar_nr_nonces[index].nr = nr;
|
|
ar_nr_nonces[index].ar = ar;
|
|
ar_nr_nonces[index].state = FIRST;
|
|
break;
|
|
}
|
|
case FIRST : {
|
|
// second nonce collect
|
|
ar_nr_nonces[index].nonce2 = nonce;
|
|
ar_nr_nonces[index].nr2 = nr;
|
|
ar_nr_nonces[index].ar2 = ar;
|
|
ar_nr_nonces[index].state = SECOND;
|
|
|
|
// send to client
|
|
cmd_send(CMD_ACK, CMD_SIMULATE_MIFARE_CARD, 0, 0, &ar_nr_nonces[index], sizeof(nonces_t));
|
|
|
|
ar_nr_nonces[index].state = EMPTY;
|
|
ar_nr_nonces[index].sector = 0;
|
|
ar_nr_nonces[index].keytype = 0;
|
|
break;
|
|
}
|
|
default: break;
|
|
}
|
|
}
|
|
|
|
crypto1_word(pcs, nr , 1);
|
|
uint32_t cardRr = ar ^ crypto1_word(pcs, 0, 0);
|
|
|
|
//test if auth OK
|
|
if (cardRr != prng_successor(nonce, 64)){
|
|
|
|
if (MF_DBGLEVEL >= 3) {
|
|
Dbprintf("AUTH FAILED for sector %d with key %c. [nr=%08x cardRr=%08x] [nt=%08x succ=%08x]"
|
|
, cardAUTHSC
|
|
, (cardAUTHKEY == 0) ? 'A' : 'B'
|
|
, nr
|
|
, cardRr
|
|
, nonce // nt
|
|
, prng_successor(nonce, 64)
|
|
);
|
|
}
|
|
// Shouldn't we respond anything here?
|
|
// Right now, we don't nack or anything, which causes the
|
|
// reader to do a WUPA after a while. /Martin
|
|
// -- which is the correct response. /piwi
|
|
cardSTATE_TO_IDLE();
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
|
|
ans = prng_successor(nonce, 96) ^ crypto1_word(pcs, 0, 0);
|
|
num_to_bytes(ans, 4, rAUTH_AT);
|
|
EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
|
|
LED_C_ON();
|
|
|
|
if (MF_DBGLEVEL >= 3) {
|
|
Dbprintf("AUTH COMPLETED for sector %d with key %c. time=%d",
|
|
cardAUTHSC,
|
|
cardAUTHKEY == 0 ? 'A' : 'B',
|
|
GetTickCount() - authTimer
|
|
);
|
|
}
|
|
cardSTATE = MFEMUL_WORK;
|
|
break;
|
|
}
|
|
case MFEMUL_WORK:{
|
|
if (len == 0) {
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
bool encrypted_data = (cardAUTHKEY != 0xFF) ;
|
|
|
|
if(encrypted_data)
|
|
mf_crypto1_decrypt(pcs, receivedCmd, len);
|
|
|
|
if (len == 4 && (receivedCmd[0] == MIFARE_AUTH_KEYA ||
|
|
receivedCmd[0] == MIFARE_AUTH_KEYB) ) {
|
|
|
|
authTimer = GetTickCount();
|
|
cardAUTHSC = receivedCmd[1] / 4; // received block -> sector
|
|
cardAUTHKEY = receivedCmd[0] & 0x1;
|
|
crypto1_destroy(pcs);
|
|
|
|
// load key into crypto
|
|
crypto1_create(pcs, emlGetKey(cardAUTHSC, cardAUTHKEY));
|
|
|
|
if (!encrypted_data) {
|
|
// first authentication
|
|
// Update crypto state init (UID ^ NONCE)
|
|
crypto1_word(pcs, cuid ^ nonce, 0);
|
|
num_to_bytes(nonce, 4, rAUTH_AT);
|
|
} else {
|
|
// nested authentication
|
|
ans = nonce ^ crypto1_word(pcs, cuid ^ nonce, 0);
|
|
num_to_bytes(ans, 4, rAUTH_AT);
|
|
|
|
if (MF_DBGLEVEL >= 3) Dbprintf("Reader doing nested authentication for block %d (0x%02x) with key %c", receivedCmd[1], receivedCmd[1], cardAUTHKEY == 0 ? 'A' : 'B');
|
|
}
|
|
|
|
EmSendCmd(rAUTH_AT, sizeof(rAUTH_AT));
|
|
cardSTATE = MFEMUL_AUTH1;
|
|
break;
|
|
}
|
|
|
|
// rule 13 of 7.5.3. in ISO 14443-4. chaining shall be continued
|
|
// BUT... ACK --> NACK
|
|
if (len == 1 && receivedCmd[0] == CARD_ACK) {
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
break;
|
|
}
|
|
|
|
// rule 12 of 7.5.3. in ISO 14443-4. R(NAK) --> R(ACK)
|
|
if (len == 1 && receivedCmd[0] == CARD_NACK_NA) {
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
|
|
break;
|
|
}
|
|
|
|
if(len != 4) {
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
|
|
if ( receivedCmd[0] == ISO14443A_CMD_READBLOCK ||
|
|
receivedCmd[0] == ISO14443A_CMD_WRITEBLOCK ||
|
|
receivedCmd[0] == MIFARE_CMD_INC ||
|
|
receivedCmd[0] == MIFARE_CMD_DEC ||
|
|
receivedCmd[0] == MIFARE_CMD_RESTORE ||
|
|
receivedCmd[0] == MIFARE_CMD_TRANSFER ) {
|
|
|
|
if (receivedCmd[1] >= 16 * 4) {
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate (0x%02) on out of range block: %d (0x%02x), nacking",receivedCmd[0],receivedCmd[1],receivedCmd[1]);
|
|
break;
|
|
}
|
|
|
|
if (receivedCmd[1] / 4 != cardAUTHSC) {
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate (0x%02) on block (0x%02x) not authenticated for (0x%02x), nacking",receivedCmd[0],receivedCmd[1],cardAUTHSC);
|
|
break;
|
|
}
|
|
}
|
|
// read block
|
|
if (receivedCmd[0] == ISO14443A_CMD_READBLOCK) {
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("Reader reading block %d (0x%02x)", receivedCmd[1], receivedCmd[1]);
|
|
|
|
emlGetMem(response, receivedCmd[1], 1);
|
|
AddCrc14A(response, 16);
|
|
mf_crypto1_encrypt(pcs, response, 18, response_par);
|
|
EmSendCmdPar(response, 18, response_par);
|
|
numReads++;
|
|
if(exitAfterNReads > 0 && numReads >= exitAfterNReads) {
|
|
Dbprintf("%d reads done, exiting", numReads);
|
|
finished = true;
|
|
}
|
|
break;
|
|
}
|
|
// write block
|
|
if (receivedCmd[0] == ISO14443A_CMD_WRITEBLOCK) {
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0xA0 write block %d (%02x)", receivedCmd[1], receivedCmd[1]);
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
|
|
cardSTATE = MFEMUL_WRITEBL2;
|
|
cardWRBL = receivedCmd[1];
|
|
break;
|
|
}
|
|
// increment, decrement, restore
|
|
if ( receivedCmd[0] == MIFARE_CMD_INC ||
|
|
receivedCmd[0] == MIFARE_CMD_DEC ||
|
|
receivedCmd[0] == MIFARE_CMD_RESTORE) {
|
|
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0x%02x inc(0xC1)/dec(0xC0)/restore(0xC2) block %d (%02x)",receivedCmd[0], receivedCmd[1], receivedCmd[1]);
|
|
|
|
if (emlCheckValBl(receivedCmd[1])) {
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("Reader tried to operate on block, but emlCheckValBl failed, nacking");
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
break;
|
|
}
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
|
|
if (receivedCmd[0] == MIFARE_CMD_INC) cardSTATE = MFEMUL_INTREG_INC;
|
|
if (receivedCmd[0] == MIFARE_CMD_DEC) cardSTATE = MFEMUL_INTREG_DEC;
|
|
if (receivedCmd[0] == MIFARE_CMD_RESTORE) cardSTATE = MFEMUL_INTREG_REST;
|
|
cardWRBL = receivedCmd[1];
|
|
break;
|
|
}
|
|
// transfer
|
|
if (receivedCmd[0] == MIFARE_CMD_TRANSFER) {
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("RECV 0x%02x transfer block %d (%02x)", receivedCmd[0], receivedCmd[1], receivedCmd[1]);
|
|
if (emlSetValBl(cardINTREG, cardINTBLOCK, receivedCmd[1]))
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
else
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
|
|
break;
|
|
}
|
|
// halt
|
|
if (receivedCmd[0] == ISO14443A_CMD_HALT && receivedCmd[1] == 0x00) {
|
|
LED_B_OFF();
|
|
LED_C_OFF();
|
|
cardSTATE = MFEMUL_HALTED;
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("--> HALTED. Selected time: %d ms", GetTickCount() - selTimer);
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
break;
|
|
}
|
|
// RATS
|
|
if (receivedCmd[0] == ISO14443A_CMD_RATS) {
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
break;
|
|
}
|
|
// command not allowed
|
|
if (MF_DBGLEVEL >= 4) Dbprintf("Received command not allowed, nacking");
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
break;
|
|
}
|
|
case MFEMUL_WRITEBL2:{
|
|
if (len == 18) {
|
|
mf_crypto1_decrypt(pcs, receivedCmd, len);
|
|
emlSetMem(receivedCmd, cardWRBL, 1);
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_ACK));
|
|
cardSTATE = MFEMUL_WORK;
|
|
} else {
|
|
cardSTATE_TO_IDLE();
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
}
|
|
break;
|
|
}
|
|
case MFEMUL_INTREG_INC:{
|
|
mf_crypto1_decrypt(pcs, receivedCmd, len);
|
|
memcpy(&ans, receivedCmd, 4);
|
|
if (emlGetValBl(&cardINTREG, &cardINTBLOCK, cardWRBL)) {
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
cardSTATE_TO_IDLE();
|
|
break;
|
|
}
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
cardINTREG = cardINTREG + ans;
|
|
cardSTATE = MFEMUL_WORK;
|
|
break;
|
|
}
|
|
case MFEMUL_INTREG_DEC:{
|
|
mf_crypto1_decrypt(pcs, receivedCmd, len);
|
|
memcpy(&ans, receivedCmd, 4);
|
|
if (emlGetValBl(&cardINTREG, &cardINTBLOCK, cardWRBL)) {
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
cardSTATE_TO_IDLE();
|
|
break;
|
|
}
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
cardINTREG = cardINTREG - ans;
|
|
cardSTATE = MFEMUL_WORK;
|
|
break;
|
|
}
|
|
case MFEMUL_INTREG_REST:{
|
|
mf_crypto1_decrypt(pcs, receivedCmd, len);
|
|
memcpy(&ans, receivedCmd, 4);
|
|
if (emlGetValBl(&cardINTREG, &cardINTBLOCK, cardWRBL)) {
|
|
EmSend4bit(mf_crypto1_encrypt4bit(pcs, CARD_NACK_NA));
|
|
cardSTATE_TO_IDLE();
|
|
break;
|
|
}
|
|
LogTrace(Uart.output, Uart.len, Uart.startTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.endTime*16 - DELAY_AIR2ARM_AS_TAG, Uart.parity, true);
|
|
cardSTATE = MFEMUL_WORK;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (MF_DBGLEVEL >= 1)
|
|
Dbprintf("Emulator stopped. Trace length: %d ", BigBuf_get_traceLen());
|
|
|
|
cmd_send(CMD_ACK,1,0,0,0,0); FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
|
|
LEDsoff();
|
|
set_tracing(false);
|
|
}
|