mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-11 01:55:38 +08:00
1232 lines
39 KiB
C
1232 lines
39 KiB
C
//-----------------------------------------------------------------------------
|
||
// Copyright (C) 2010 iZsh <izsh at fail0verflow.com>, Hagen Fritsch
|
||
// 2011, 2017 Merlok
|
||
// 2014, Peter Fillmore
|
||
// 2015, 2016, 2017 Iceman
|
||
//
|
||
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
|
||
// at your option, any later version. See the LICENSE.txt file for the text of
|
||
// the license.
|
||
//-----------------------------------------------------------------------------
|
||
// High frequency ISO14443A commands
|
||
//-----------------------------------------------------------------------------
|
||
#include "cmdhf14a.h"
|
||
|
||
static int CmdHelp(const char *Cmd);
|
||
static int waitCmd(uint8_t iLen);
|
||
|
||
static const manufactureName manufactureMapping[] = {
|
||
// ID, "Vendor Country"
|
||
{ 0x01, "Motorola UK" },
|
||
{ 0x02, "ST Microelectronics SA France" },
|
||
{ 0x03, "Hitachi, Ltd Japan" },
|
||
{ 0x04, "NXP Semiconductors Germany" },
|
||
{ 0x05, "Infineon Technologies AG Germany" },
|
||
{ 0x06, "Cylink USA" },
|
||
{ 0x07, "Texas Instrument France" },
|
||
{ 0x08, "Fujitsu Limited Japan" },
|
||
{ 0x09, "Matsushita Electronics Corporation, Semiconductor Company Japan" },
|
||
{ 0x0A, "NEC Japan" },
|
||
{ 0x0B, "Oki Electric Industry Co. Ltd Japan" },
|
||
{ 0x0C, "Toshiba Corp. Japan" },
|
||
{ 0x0D, "Mitsubishi Electric Corp. Japan" },
|
||
{ 0x0E, "Samsung Electronics Co. Ltd Korea" },
|
||
{ 0x0F, "Hynix / Hyundai, Korea" },
|
||
{ 0x10, "LG-Semiconductors Co. Ltd Korea" },
|
||
{ 0x11, "Emosyn-EM Microelectronics USA" },
|
||
{ 0x12, "INSIDE Technology France" },
|
||
{ 0x13, "ORGA Kartensysteme GmbH Germany" },
|
||
{ 0x14, "SHARP Corporation Japan" },
|
||
{ 0x15, "ATMEL France" },
|
||
{ 0x16, "EM Microelectronic-Marin SA Switzerland" },
|
||
{ 0x17, "KSW Microtec GmbH Germany" },
|
||
{ 0x18, "ZMD AG Germany" },
|
||
{ 0x19, "XICOR, Inc. USA" },
|
||
{ 0x1A, "Sony Corporation Japan" },
|
||
{ 0x1B, "Malaysia Microelectronic Solutions Sdn. Bhd Malaysia" },
|
||
{ 0x1C, "Emosyn USA" },
|
||
{ 0x1D, "Shanghai Fudan Microelectronics Co. Ltd. P.R. China" },
|
||
{ 0x1E, "Magellan Technology Pty Limited Australia" },
|
||
{ 0x1F, "Melexis NV BO Switzerland" },
|
||
{ 0x20, "Renesas Technology Corp. Japan" },
|
||
{ 0x21, "TAGSYS France" },
|
||
{ 0x22, "Transcore USA" },
|
||
{ 0x23, "Shanghai belling corp., ltd. China" },
|
||
{ 0x24, "Masktech Germany Gmbh Germany" },
|
||
{ 0x25, "Innovision Research and Technology Plc UK" },
|
||
{ 0x26, "Hitachi ULSI Systems Co., Ltd. Japan" },
|
||
{ 0x27, "Cypak AB Sweden" },
|
||
{ 0x28, "Ricoh Japan" },
|
||
{ 0x29, "ASK France" },
|
||
{ 0x2A, "Unicore Microsystems, LLC Russian Federation" },
|
||
{ 0x2B, "Dallas Semiconductor/Maxim USA" },
|
||
{ 0x2C, "Impinj, Inc. USA" },
|
||
{ 0x2D, "RightPlug Alliance USA" },
|
||
{ 0x2E, "Broadcom Corporation USA" },
|
||
{ 0x2F, "MStar Semiconductor, Inc Taiwan, ROC" },
|
||
{ 0x30, "BeeDar Technology Inc. USA" },
|
||
{ 0x31, "RFIDsec Denmark" },
|
||
{ 0x32, "Schweizer Electronic AG Germany" },
|
||
{ 0x33, "AMIC Technology Corp Taiwan" },
|
||
{ 0x34, "Mikron JSC Russia" },
|
||
{ 0x35, "Fraunhofer Institute for Photonic Microsystems Germany" },
|
||
{ 0x36, "IDS Microchip AG Switzerland" },
|
||
{ 0x37, "Kovio USA" },
|
||
{ 0x38, "HMT Microelectronic Ltd Switzerland" },
|
||
{ 0x39, "Silicon Craft Technology Thailand" },
|
||
{ 0x3A, "Advanced Film Device Inc. Japan" },
|
||
{ 0x3B, "Nitecrest Ltd UK" },
|
||
{ 0x3C, "Verayo Inc. USA" },
|
||
{ 0x3D, "HID Global USA" },
|
||
{ 0x3E, "Productivity Engineering Gmbh Germany" },
|
||
{ 0x3F, "Austriamicrosystems AG (reserved) Austria" },
|
||
{ 0x40, "Gemalto SA France" },
|
||
{ 0x41, "Renesas Electronics Corporation Japan" },
|
||
{ 0x42, "3Alogics Inc Korea" },
|
||
{ 0x43, "Top TroniQ Asia Limited Hong Kong" },
|
||
{ 0x44, "Gentag Inc. USA" },
|
||
{ 0x45, "Invengo Information Technology Co.Ltd China" },
|
||
{ 0x46, "Guangzhou Sysur Microelectronics, Inc China" },
|
||
{ 0x47, "CEITEC S.A. Brazil" },
|
||
{ 0x48, "Shanghai Quanray Electronics Co. Ltd. China" },
|
||
{ 0x49, "MediaTek Inc Taiwan" },
|
||
{ 0x4A, "Angstrem PJSC Russia" },
|
||
{ 0x4B, "Celisic Semiconductor (Hong Kong) Limited China" },
|
||
{ 0x4C, "LEGIC Identsystems AG Switzerland" },
|
||
{ 0x4D, "Balluff GmbH Germany" },
|
||
{ 0x4E, "Oberthur Technologies France" },
|
||
{ 0x4F, "Silterra Malaysia Sdn. Bhd. Malaysia" },
|
||
{ 0x50, "DELTA Danish Electronics, Light & Acoustics Denmark" },
|
||
{ 0x51, "Giesecke & Devrient GmbH Germany" },
|
||
{ 0x52, "Shenzhen China Vision Microelectronics Co., Ltd. China" },
|
||
{ 0x53, "Shanghai Feiju Microelectronics Co. Ltd. China" },
|
||
{ 0x54, "Intel Corporation USA" },
|
||
{ 0x55, "Microsensys GmbH Germany" },
|
||
{ 0x56, "Sonix Technology Co., Ltd. Taiwan" },
|
||
{ 0x57, "Qualcomm Technologies Inc USA" },
|
||
{ 0x58, "Realtek Semiconductor Corp Taiwan" },
|
||
{ 0x59, "Freevision Technologies Co. Ltd China" },
|
||
{ 0x5A, "Giantec Semiconductor Inc. China" },
|
||
{ 0x5B, "JSC Angstrem-T Russia" },
|
||
{ 0x5C, "STARCHIP France" },
|
||
{ 0x5D, "SPIRTECH France" },
|
||
{ 0x5E, "GANTNER Electronic GmbH Austria" },
|
||
{ 0x5F, "Nordic Semiconductor Norway" },
|
||
{ 0x60, "Verisiti Inc USA" },
|
||
{ 0x61, "Wearlinks Technology Inc. China" },
|
||
{ 0x62, "Userstar Information Systems Co., Ltd Taiwan" },
|
||
{ 0x63, "Pragmatic Printing Ltd. UK" },
|
||
{ 0x64, "Associacao do Laboratorio de Sistemas Integraveis Tecnologico – LSI-TEC Brazil" },
|
||
{ 0x65, "Tendyron Corporation China" },
|
||
{ 0x66, "MUTO Smart Co., Ltd. Korea" },
|
||
{ 0x67, "ON Semiconductor USA" },
|
||
{ 0x68, "TUBITAK BILGEM Turkey" },
|
||
{ 0x69, "Huada Semiconductor Co., Ltd China" },
|
||
{ 0x6A, "SEVENEY France" },
|
||
{ 0x6B, "ISSM France" },
|
||
{ 0x6C, "Wisesec Ltd Israel" },
|
||
{ 0x7C, "DB HiTek Co Ltd Korea" },
|
||
{ 0x7D, "SATO Vicinity Australia" },
|
||
{ 0x7E, "Holtek Taiwan" },
|
||
{ 0x00, "no tag-info available" } // must be the last entry
|
||
};
|
||
|
||
// get a product description based on the UID
|
||
// uid[8] tag uid
|
||
// returns description of the best match
|
||
char* getTagInfo(uint8_t uid) {
|
||
|
||
int i;
|
||
int len = sizeof(manufactureMapping) / sizeof(manufactureName);
|
||
|
||
for ( i = 0; i < len; ++i )
|
||
if ( uid == manufactureMapping[i].uid)
|
||
return manufactureMapping[i].desc;
|
||
|
||
//No match, return default
|
||
return manufactureMapping[len-1].desc;
|
||
}
|
||
|
||
// iso14a apdu input frame length
|
||
static uint16_t frameLength = 0;
|
||
uint16_t atsFSC[] = {16, 24, 32, 40, 48, 64, 96, 128, 256};
|
||
|
||
int usage_hf_14a_sim(void) {
|
||
// PrintAndLogEx(NORMAL, "\n Emulating ISO/IEC 14443 type A tag with 4,7 or 10 byte UID\n");
|
||
PrintAndLogEx(NORMAL, "\n Emulating ISO/IEC 14443 type A tag with 4,7 byte UID\n");
|
||
PrintAndLogEx(NORMAL, "Usage: hf 14a sim [h] t <type> u <uid> [x] [e] [v]");
|
||
PrintAndLogEx(NORMAL, "Options:");
|
||
PrintAndLogEx(NORMAL, " h : This help");
|
||
PrintAndLogEx(NORMAL, " t : 1 = MIFARE Classic 1k");
|
||
PrintAndLogEx(NORMAL, " 2 = MIFARE Ultralight");
|
||
PrintAndLogEx(NORMAL, " 3 = MIFARE Desfire");
|
||
PrintAndLogEx(NORMAL, " 4 = ISO/IEC 14443-4");
|
||
PrintAndLogEx(NORMAL, " 5 = MIFARE Tnp3xxx");
|
||
PrintAndLogEx(NORMAL, " 6 = MIFARE Mini");
|
||
PrintAndLogEx(NORMAL, " 7 = AMIIBO (NTAG 215), pack 0x8080");
|
||
PrintAndLogEx(NORMAL, " 8 = MIFARE Classic 4k");
|
||
PrintAndLogEx(NORMAL, " 9 = FM11RF005SH Shanghai Metro");
|
||
// PrintAndLogEx(NORMAL, " u : 4, 7 or 10 byte UID");
|
||
PrintAndLogEx(NORMAL, " u : 4, 7 byte UID");
|
||
PrintAndLogEx(NORMAL, " x : (Optional) Performs the 'reader attack', nr/ar attack against a reader");
|
||
PrintAndLogEx(NORMAL, " e : (Optional) Fill simulator keys from found keys");
|
||
PrintAndLogEx(NORMAL, " v : (Optional) Verbose");
|
||
PrintAndLogEx(NORMAL, "Examples:");
|
||
PrintAndLogEx(NORMAL, " hf 14a sim t 1 u 11223344 x");
|
||
PrintAndLogEx(NORMAL, " hf 14a sim t 1 u 11223344");
|
||
PrintAndLogEx(NORMAL, " hf 14a sim t 1 u 11223344556677");
|
||
// PrintAndLogEx(NORMAL, " hf 14a sim t 1 u 11223445566778899AA\n");
|
||
return 0;
|
||
}
|
||
int usage_hf_14a_sniff(void) {
|
||
PrintAndLogEx(NORMAL, "It get data from the field and saves it into command buffer.");
|
||
PrintAndLogEx(NORMAL, "Buffer accessible from command 'hf list 14a'");
|
||
PrintAndLogEx(NORMAL, "Usage: hf 14a sniff [c][r]");
|
||
PrintAndLogEx(NORMAL, "c - triggered by first data from card");
|
||
PrintAndLogEx(NORMAL, "r - triggered by first 7-bit request from reader (REQ,WUP,...)");
|
||
PrintAndLogEx(NORMAL, "Examples:");
|
||
PrintAndLogEx(NORMAL, " hf 14a sniff c r");
|
||
return 0;
|
||
}
|
||
int usage_hf_14a_raw(void) {
|
||
PrintAndLogEx(NORMAL, "Usage: hf 14a raw [-h] [-r] [-c] [-p] [-a] [-T] [-t] <milliseconds> [-b] <number of bits> <0A 0B 0C ... hex>");
|
||
PrintAndLogEx(NORMAL, " -h this help");
|
||
PrintAndLogEx(NORMAL, " -r do not read response");
|
||
PrintAndLogEx(NORMAL, " -c calculate and append CRC");
|
||
PrintAndLogEx(NORMAL, " -p leave the signal field ON after receive");
|
||
PrintAndLogEx(NORMAL, " -a active signal field ON without select");
|
||
PrintAndLogEx(NORMAL, " -s active signal field ON with select");
|
||
PrintAndLogEx(NORMAL, " -b number of bits to send. Useful for send partial byte");
|
||
PrintAndLogEx(NORMAL, " -t timeout in ms");
|
||
PrintAndLogEx(NORMAL, " -T use Topaz protocol to send command");
|
||
PrintAndLogEx(NORMAL, " -3 ISO14443-3 select only (skip RATS)");
|
||
return 0;
|
||
}
|
||
int usage_hf_14a_reader(void) {
|
||
PrintAndLogEx(NORMAL, "Usage: hf 14a reader [k|s|x] [3]");
|
||
PrintAndLogEx(NORMAL, " k keep the field active after command executed");
|
||
PrintAndLogEx(NORMAL, " s silent (no messages)");
|
||
PrintAndLogEx(NORMAL, " x just drop the signal field");
|
||
PrintAndLogEx(NORMAL, " 3 ISO14443-3 select only (skip RATS)");
|
||
return 0;
|
||
}
|
||
int usage_hf_14a_info(void){
|
||
PrintAndLogEx(NORMAL, "This command makes more extensive tests against a ISO14443a tag in order to collect information");
|
||
PrintAndLogEx(NORMAL, "Usage: hf 14a info [h|s]");
|
||
PrintAndLogEx(NORMAL, " s silent (no messages)");
|
||
PrintAndLogEx(NORMAL, " n test for nack bug");
|
||
return 0;
|
||
}
|
||
|
||
int CmdHF14AList(const char *Cmd) {
|
||
//PrintAndLogEx(NORMAL, "Deprecated command, use 'hf list 14a' instead");
|
||
CmdTraceList("14a");
|
||
return 0;
|
||
}
|
||
|
||
int Hf14443_4aGetCardData(iso14a_card_select_t * card) {
|
||
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT, 0, 0}};
|
||
SendCommand(&c);
|
||
|
||
UsbCommand resp;
|
||
WaitForResponse(CMD_ACK,&resp);
|
||
|
||
memcpy(card, (iso14a_card_select_t *)resp.d.asBytes, sizeof(iso14a_card_select_t));
|
||
|
||
uint64_t select_status = resp.arg[0]; // 0: couldn't read, 1: OK, with ATS, 2: OK, no ATS, 3: proprietary Anticollision
|
||
|
||
if(select_status == 0) {
|
||
PrintAndLog("E->iso14443a card select failed");
|
||
return 1;
|
||
}
|
||
|
||
if(select_status == 2) {
|
||
PrintAndLog("E->Card doesn't support iso14443-4 mode");
|
||
return 1;
|
||
}
|
||
|
||
if(select_status == 3) {
|
||
PrintAndLog("E->Card doesn't support standard iso14443-3 anticollision");
|
||
PrintAndLog("\tATQA : %02x %02x", card->atqa[1], card->atqa[0]);
|
||
return 1;
|
||
}
|
||
|
||
PrintAndLog(" UID: %s", sprint_hex(card->uid, card->uidlen));
|
||
PrintAndLog("ATQA: %02x %02x", card->atqa[1], card->atqa[0]);
|
||
PrintAndLog(" SAK: %02x [%" PRIu64 "]", card->sak, resp.arg[0]);
|
||
if(card->ats_len < 3) { // a valid ATS consists of at least the length byte (TL) and 2 CRC bytes
|
||
PrintAndLog("E-> Error ATS length(%d) : %s", card->ats_len, sprint_hex(card->ats, card->ats_len));
|
||
return 1;
|
||
}
|
||
PrintAndLog(" ATS: %s", sprint_hex(card->ats, card->ats_len));
|
||
|
||
return 0;
|
||
}
|
||
|
||
int CmdHF14AReader(const char *Cmd) {
|
||
|
||
uint32_t cm = ISO14A_CONNECT;
|
||
bool disconnectAfter = true, silent = false;
|
||
int cmdp = 0;
|
||
|
||
while (param_getchar(Cmd, cmdp) != 0x00) {
|
||
switch (tolower(param_getchar(Cmd, cmdp))) {
|
||
case 'h':
|
||
return usage_hf_14a_reader();
|
||
case '3':
|
||
cm |= ISO14A_NO_RATS;
|
||
break;
|
||
case 'k':
|
||
disconnectAfter = false;
|
||
break;
|
||
case 's':
|
||
silent = true;
|
||
break;
|
||
case 'x':
|
||
cm &= ~ISO14A_CONNECT;
|
||
break;
|
||
default:
|
||
PrintAndLogEx(WARNING, "Unknown command.");
|
||
return 1;
|
||
}
|
||
cmdp++;
|
||
}
|
||
|
||
if (!disconnectAfter)
|
||
cm |= ISO14A_NO_DISCONNECT;
|
||
|
||
UsbCommand c = {CMD_READER_ISO_14443a, {cm, 0, 0}};
|
||
clearCommandBuffer();
|
||
SendCommand(&c);
|
||
|
||
if (ISO14A_CONNECT & cm) {
|
||
UsbCommand resp;
|
||
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)) {
|
||
if (!silent) PrintAndLogEx(WARNING, "iso14443a card select failed");
|
||
DropField();
|
||
return 1;
|
||
}
|
||
|
||
iso14a_card_select_t card;
|
||
memcpy(&card, (iso14a_card_select_t *)resp.d.asBytes, sizeof(iso14a_card_select_t));
|
||
|
||
/*
|
||
0: couldn't read
|
||
1: OK, with ATS
|
||
2: OK, no ATS
|
||
3: proprietary Anticollision
|
||
*/
|
||
uint64_t select_status = resp.arg[0];
|
||
|
||
if (select_status == 0) {
|
||
if (!silent) PrintAndLogEx(WARNING, "iso14443a card select failed");
|
||
DropField();
|
||
return 1;
|
||
}
|
||
|
||
if (select_status == 3) {
|
||
PrintAndLogEx(NORMAL, "Card doesn't support standard iso14443-3 anticollision");
|
||
PrintAndLogEx(NORMAL, "ATQA : %02x %02x", card.atqa[1], card.atqa[0]);
|
||
DropField();
|
||
return 1;
|
||
}
|
||
|
||
PrintAndLogEx(NORMAL, " UID : %s", sprint_hex(card.uid, card.uidlen));
|
||
PrintAndLogEx(NORMAL, "ATQA : %02x %02x", card.atqa[1], card.atqa[0]);
|
||
PrintAndLogEx(NORMAL, " SAK : %02x [%" PRIu64 "]", card.sak, resp.arg[0]);
|
||
|
||
if(card.ats_len >= 3) { // a valid ATS consists of at least the length byte (TL) and 2 CRC bytes
|
||
PrintAndLogEx(NORMAL, " ATS : %s", sprint_hex(card.ats, card.ats_len));
|
||
}
|
||
|
||
if (!disconnectAfter) {
|
||
if (!silent) PrintAndLogEx(SUCCESS, "Card is selected. You can now start sending commands");
|
||
}
|
||
}
|
||
|
||
if (disconnectAfter) {
|
||
if (!silent) PrintAndLogEx(SUCCESS, "field dropped.");
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
int CmdHF14AInfo(const char *Cmd) {
|
||
|
||
if (Cmd[0] == 'h' || Cmd[0] == 'H') return usage_hf_14a_info();
|
||
|
||
bool silent = (Cmd[0] == 's' || Cmd[0] == 'S');
|
||
bool do_nack_test = (Cmd[0] == 'n' || Cmd[0] == 'N');
|
||
|
||
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_DISCONNECT, 0, 0}};
|
||
clearCommandBuffer();
|
||
SendCommand(&c);
|
||
UsbCommand resp;
|
||
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2500)) {
|
||
if (!silent) PrintAndLogEx(WARNING, "iso14443a card select failed");
|
||
DropField();
|
||
return 0;
|
||
}
|
||
|
||
iso14a_card_select_t card;
|
||
memcpy(&card, (iso14a_card_select_t *)resp.d.asBytes, sizeof(iso14a_card_select_t));
|
||
|
||
/*
|
||
0: couldn't read
|
||
1: OK, with ATS
|
||
2: OK, no ATS
|
||
3: proprietary Anticollision
|
||
*/
|
||
uint64_t select_status = resp.arg[0];
|
||
|
||
if (select_status == 0) {
|
||
if (!silent) PrintAndLogEx(WARNING, "iso14443a card select failed");
|
||
DropField();
|
||
return 0;
|
||
}
|
||
|
||
if (select_status == 3) {
|
||
PrintAndLogEx(NORMAL, "Card doesn't support standard iso14443-3 anticollision");
|
||
PrintAndLogEx(NORMAL, "ATQA : %02x %02x", card.atqa[1], card.atqa[0]);
|
||
DropField();
|
||
return select_status;
|
||
}
|
||
|
||
PrintAndLogEx(NORMAL, " UID : %s", sprint_hex(card.uid, card.uidlen));
|
||
PrintAndLogEx(NORMAL, "ATQA : %02x %02x", card.atqa[1], card.atqa[0]);
|
||
PrintAndLogEx(NORMAL, " SAK : %02x [%" PRIu64 "]", card.sak, resp.arg[0]);
|
||
|
||
bool isMifareClassic = true;
|
||
switch (card.sak) {
|
||
case 0x00:
|
||
isMifareClassic = false;
|
||
|
||
// ******** is card of the MFU type (UL/ULC/NTAG/ etc etc)
|
||
DropField();
|
||
|
||
uint32_t tagT = GetHF14AMfU_Type();
|
||
if (tagT != UL_ERROR)
|
||
ul_print_type(tagT, 0);
|
||
else
|
||
PrintAndLogEx(NORMAL, "TYPE: Possible AZTEK (iso14443a compliant)");
|
||
|
||
// reconnect for further tests
|
||
c.arg[0] = ISO14A_CONNECT | ISO14A_NO_DISCONNECT;
|
||
c.arg[1] = 0;
|
||
c.arg[2] = 0;
|
||
clearCommandBuffer();
|
||
SendCommand(&c);
|
||
UsbCommand resp;
|
||
WaitForResponse(CMD_ACK, &resp);
|
||
|
||
memcpy(&card, (iso14a_card_select_t *)resp.d.asBytes, sizeof(iso14a_card_select_t));
|
||
|
||
select_status = resp.arg[0]; // 0: couldn't read, 1: OK, with ATS, 2: OK, no ATS
|
||
|
||
if(select_status == 0) {
|
||
DropField();
|
||
return 0;
|
||
}
|
||
break;
|
||
case 0x01: PrintAndLogEx(NORMAL, "TYPE : NXP TNP3xxx Activision Game Appliance"); break;
|
||
case 0x04: PrintAndLogEx(NORMAL, "TYPE : NXP MIFARE (various !DESFire !DESFire EV1)"); isMifareClassic = false; break;
|
||
case 0x08: PrintAndLogEx(NORMAL, "TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1 | 1k Ev1"); break;
|
||
case 0x09: PrintAndLogEx(NORMAL, "TYPE : NXP MIFARE Mini 0.3k"); break;
|
||
case 0x0A: PrintAndLogEx(NORMAL, "TYPE : FM11RF005SH (Shanghai Metro)"); break;
|
||
case 0x10: PrintAndLogEx(NORMAL, "TYPE : NXP MIFARE Plus 2k SL2"); break;
|
||
case 0x11: PrintAndLogEx(NORMAL, "TYPE : NXP MIFARE Plus 4k SL2"); break;
|
||
case 0x18: PrintAndLogEx(NORMAL, "TYPE : NXP MIFARE Classic 4k | Plus 4k SL1 | 4k Ev1"); break;
|
||
case 0x20: PrintAndLogEx(NORMAL, "TYPE : NXP MIFARE DESFire 4k | DESFire EV1 2k/4k/8k | Plus 2k/4k SL3 | JCOP 31/41"); isMifareClassic = false; break;
|
||
case 0x24: PrintAndLogEx(NORMAL, "TYPE : NXP MIFARE DESFire | DESFire EV1"); isMifareClassic = false; break;
|
||
case 0x28: PrintAndLogEx(NORMAL, "TYPE : JCOP31 or JCOP41 v2.3.1"); break;
|
||
case 0x38: PrintAndLogEx(NORMAL, "TYPE : Nokia 6212 or 6131 MIFARE CLASSIC 4K"); break;
|
||
case 0x88: PrintAndLogEx(NORMAL, "TYPE : Infineon MIFARE CLASSIC 1K"); break;
|
||
case 0x98: PrintAndLogEx(NORMAL, "TYPE : Gemplus MPCOS"); break;
|
||
default: ;
|
||
}
|
||
|
||
// Double & triple sized UID, can be mapped to a manufacturer.
|
||
if ( card.uidlen > 4 ) {
|
||
PrintAndLogEx(NORMAL, "MANUFACTURER : %s", getTagInfo(card.uid[0]));
|
||
}
|
||
|
||
// try to request ATS even if tag claims not to support it
|
||
if (select_status == 2) {
|
||
uint8_t rats[] = { 0xE0, 0x80 }; // FSDI=8 (FSD=256), CID=0
|
||
c.arg[0] = ISO14A_RAW | ISO14A_APPEND_CRC | ISO14A_NO_DISCONNECT;
|
||
c.arg[1] = 2;
|
||
c.arg[2] = 0;
|
||
memcpy(c.d.asBytes, rats, 2);
|
||
clearCommandBuffer();
|
||
SendCommand(&c);
|
||
WaitForResponse(CMD_ACK,&resp);
|
||
|
||
memcpy(card.ats, resp.d.asBytes, resp.arg[0]);
|
||
card.ats_len = resp.arg[0]; // note: ats_len includes CRC Bytes
|
||
}
|
||
|
||
if(card.ats_len >= 3) { // a valid ATS consists of at least the length byte (TL) and 2 CRC bytes
|
||
bool ta1 = 0, tb1 = 0, tc1 = 0;
|
||
int pos;
|
||
|
||
if (select_status == 2) {
|
||
PrintAndLogEx(NORMAL, "SAK incorrectly claims that card doesn't support RATS");
|
||
}
|
||
PrintAndLogEx(NORMAL, " ATS : %s", sprint_hex(card.ats, card.ats_len));
|
||
PrintAndLogEx(NORMAL, " - TL : length is %d bytes", card.ats[0]);
|
||
if (card.ats[0] != card.ats_len - 2) {
|
||
PrintAndLogEx(NORMAL, "ATS may be corrupted. Length of ATS (%d bytes incl. 2 Bytes CRC) doesn't match TL", card.ats_len);
|
||
}
|
||
|
||
if (card.ats[0] > 1) { // there is a format byte (T0)
|
||
ta1 = (card.ats[1] & 0x10) == 0x10;
|
||
tb1 = (card.ats[1] & 0x20) == 0x20;
|
||
tc1 = (card.ats[1] & 0x40) == 0x40;
|
||
int16_t fsci = card.ats[1] & 0x0f;
|
||
|
||
PrintAndLogEx(NORMAL, " - T0 : TA1 is%s present, TB1 is%s present, "
|
||
"TC1 is%s present, FSCI is %d (FSC = %ld)",
|
||
(ta1 ? "" : " NOT"),
|
||
(tb1 ? "" : " NOT"),
|
||
(tc1 ? "" : " NOT"),
|
||
fsci,
|
||
fsci < sizeof(atsFSC) ? atsFSC[fsci] : -1
|
||
);
|
||
}
|
||
pos = 2;
|
||
if (ta1) {
|
||
char dr[16], ds[16];
|
||
dr[0] = ds[0] = '\0';
|
||
if (card.ats[pos] & 0x10) strcat(ds, "2, ");
|
||
if (card.ats[pos] & 0x20) strcat(ds, "4, ");
|
||
if (card.ats[pos] & 0x40) strcat(ds, "8, ");
|
||
if (card.ats[pos] & 0x01) strcat(dr, "2, ");
|
||
if (card.ats[pos] & 0x02) strcat(dr, "4, ");
|
||
if (card.ats[pos] & 0x04) strcat(dr, "8, ");
|
||
if (strlen(ds) != 0) ds[strlen(ds) - 2] = '\0';
|
||
if (strlen(dr) != 0) dr[strlen(dr) - 2] = '\0';
|
||
PrintAndLogEx(NORMAL, " - TA1 : different divisors are%s supported, "
|
||
"DR: [%s], DS: [%s]",
|
||
(card.ats[pos] & 0x80 ? " NOT" : ""), dr, ds);
|
||
pos++;
|
||
}
|
||
if (tb1) {
|
||
uint32_t sfgi = card.ats[pos] & 0x0F;
|
||
uint32_t fwi = card.ats[pos] >> 4;
|
||
PrintAndLogEx(NORMAL, " - TB1 : SFGI = %d (SFGT = %s%ld/fc), FWI = %d (FWT = %ld/fc)",
|
||
(sfgi),
|
||
sfgi ? "" : "(not needed) ",
|
||
sfgi ? (1 << 12) << sfgi : 0,
|
||
fwi,
|
||
(1 << 12) << fwi
|
||
);
|
||
pos++;
|
||
}
|
||
if (tc1) {
|
||
PrintAndLogEx(NORMAL, " - TC1 : NAD is%s supported, CID is%s supported",
|
||
(card.ats[pos] & 0x01) ? "" : " NOT",
|
||
(card.ats[pos] & 0x02) ? "" : " NOT");
|
||
pos++;
|
||
}
|
||
if (card.ats[0] > pos && card.ats[0] < card.ats_len - 2 ) {
|
||
char *tip = "";
|
||
if (card.ats[0] - pos >= 7) {
|
||
if (memcmp(card.ats + pos, "\xC1\x05\x2F\x2F\x01\xBC\xD6", 7) == 0) {
|
||
tip = "-> MIFARE Plus X 2K or 4K";
|
||
} else if (memcmp(card.ats + pos, "\xC1\x05\x2F\x2F\x00\x35\xC7", 7) == 0) {
|
||
tip = "-> MIFARE Plus S 2K or 4K";
|
||
}
|
||
}
|
||
PrintAndLogEx(NORMAL, " - HB : %s%s", sprint_hex(card.ats + pos, card.ats[0] - pos), tip);
|
||
if (card.ats[pos] == 0xC1) {
|
||
PrintAndLogEx(NORMAL, " c1 -> Mifare or (multiple) virtual cards of various type");
|
||
PrintAndLogEx(NORMAL, " %02x -> Length is %d bytes", card.ats[pos + 1], card.ats[pos + 1]);
|
||
switch (card.ats[pos + 2] & 0xf0) {
|
||
case 0x10: PrintAndLogEx(NORMAL, " 1x -> MIFARE DESFire"); break;
|
||
case 0x20: PrintAndLogEx(NORMAL, " 2x -> MIFARE Plus"); break;
|
||
}
|
||
switch (card.ats[pos + 2] & 0x0f) {
|
||
case 0x00: PrintAndLogEx(NORMAL, " x0 -> <1 kByte"); break;
|
||
case 0x01: PrintAndLogEx(NORMAL, " x1 -> 1 kByte"); break;
|
||
case 0x02: PrintAndLogEx(NORMAL, " x2 -> 2 kByte"); break;
|
||
case 0x03: PrintAndLogEx(NORMAL, " x3 -> 4 kByte"); break;
|
||
case 0x04: PrintAndLogEx(NORMAL, " x4 -> 8 kByte"); break;
|
||
}
|
||
switch (card.ats[pos + 3] & 0xf0) {
|
||
case 0x00: PrintAndLogEx(NORMAL, " 0x -> Engineering sample"); break;
|
||
case 0x20: PrintAndLogEx(NORMAL, " 2x -> Released"); break;
|
||
}
|
||
switch (card.ats[pos + 3] & 0x0f) {
|
||
case 0x00: PrintAndLogEx(NORMAL, " x0 -> Generation 1"); break;
|
||
case 0x01: PrintAndLogEx(NORMAL, " x1 -> Generation 2"); break;
|
||
case 0x02: PrintAndLogEx(NORMAL, " x2 -> Generation 3"); break;
|
||
}
|
||
switch (card.ats[pos + 4] & 0x0f) {
|
||
case 0x00: PrintAndLogEx(NORMAL, " x0 -> Only VCSL supported"); break;
|
||
case 0x01: PrintAndLogEx(NORMAL, " x1 -> VCS, VCSL, and SVC supported"); break;
|
||
case 0x0E: PrintAndLogEx(NORMAL, " xE -> no VCS command supported"); break;
|
||
}
|
||
}
|
||
}
|
||
} else {
|
||
PrintAndLogEx(INFO, "proprietary non iso14443-4 card found, RATS not supported");
|
||
}
|
||
|
||
detect_classic_magic();
|
||
|
||
if (isMifareClassic) {
|
||
int res = detect_classic_prng();
|
||
if ( res == 1 )
|
||
PrintAndLogEx(SUCCESS, "Prng detection: WEAK");
|
||
else if (res == 0 )
|
||
PrintAndLogEx(SUCCESS, "Prng detection: HARD");
|
||
else
|
||
PrintAndLogEx(FAILED, "prng detection: failed");
|
||
|
||
if ( do_nack_test )
|
||
detect_classic_nackbug(silent);
|
||
}
|
||
|
||
return select_status;
|
||
}
|
||
|
||
// Collect ISO14443 Type A UIDs
|
||
int CmdHF14ACUIDs(const char *Cmd) {
|
||
// requested number of UIDs
|
||
int n = atoi(Cmd);
|
||
// collect at least 1 (e.g. if no parameter was given)
|
||
n = n > 0 ? n : 1;
|
||
|
||
uint64_t t1 = msclock();
|
||
PrintAndLogEx(SUCCESS, "collecting %d UIDs", n);
|
||
|
||
// repeat n times
|
||
for (int i = 0; i < n; i++) {
|
||
|
||
if (ukbhit()) {
|
||
int gc = getchar(); (void)gc;
|
||
PrintAndLogEx(NORMAL, "\n[!] aborted via keyboard!\n");
|
||
break;
|
||
}
|
||
|
||
// execute anticollision procedure
|
||
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_RATS, 0, 0}};
|
||
SendCommand(&c);
|
||
|
||
UsbCommand resp;
|
||
WaitForResponse(CMD_ACK,&resp);
|
||
|
||
iso14a_card_select_t *card = (iso14a_card_select_t *) resp.d.asBytes;
|
||
|
||
// check if command failed
|
||
if (resp.arg[0] == 0) {
|
||
PrintAndLogEx(WARNING, "card select failed.");
|
||
} else {
|
||
char uid_string[20];
|
||
for (uint16_t i = 0; i < card->uidlen; i++) {
|
||
sprintf(&uid_string[2*i], "%02X", card->uid[i]);
|
||
}
|
||
PrintAndLogEx(NORMAL, "%s", uid_string);
|
||
}
|
||
}
|
||
PrintAndLogEx(SUCCESS, "end: %" PRIu64 " seconds", (msclock()-t1)/1000);
|
||
return 1;
|
||
}
|
||
|
||
// ## simulate iso14443a tag
|
||
int CmdHF14ASim(const char *Cmd) {
|
||
bool errors = false;
|
||
uint8_t flags = 0;
|
||
uint8_t tagtype = 1;
|
||
uint8_t cmdp = 0;
|
||
uint8_t uid[10] = {0,0,0,0,0,0,0,0,0,0};
|
||
int uidlen = 0;
|
||
bool useUIDfromEML = true;
|
||
bool setEmulatorMem = false;
|
||
bool verbose = false;
|
||
nonces_t data[1];
|
||
|
||
while(param_getchar(Cmd, cmdp) != 0x00 && !errors) {
|
||
switch(param_getchar(Cmd, cmdp)) {
|
||
case 'h':
|
||
case 'H':
|
||
return usage_hf_14a_sim();
|
||
case 't':
|
||
case 'T':
|
||
// Retrieve the tag type
|
||
tagtype = param_get8ex(Cmd, cmdp+1, 0, 10);
|
||
if (tagtype == 0)
|
||
errors = true;
|
||
cmdp += 2;
|
||
break;
|
||
case 'u':
|
||
case 'U':
|
||
// Retrieve the full 4,7,10 byte long uid
|
||
param_gethex_ex(Cmd, cmdp+1, uid, &uidlen);
|
||
switch(uidlen) {
|
||
//case 20: flags |= FLAG_10B_UID_IN_DATA; break;
|
||
case 14: flags |= FLAG_7B_UID_IN_DATA; break;
|
||
case 8: flags |= FLAG_4B_UID_IN_DATA; break;
|
||
default: errors = true; break;
|
||
}
|
||
if (!errors) {
|
||
PrintAndLogEx(SUCCESS, "Emulating ISO/IEC 14443 type A tag with %d byte UID (%s)", uidlen>>1, sprint_hex(uid, uidlen>>1));
|
||
useUIDfromEML = false;
|
||
}
|
||
cmdp += 2;
|
||
break;
|
||
case 'v':
|
||
case 'V':
|
||
verbose = true;
|
||
cmdp++;
|
||
break;
|
||
case 'x':
|
||
case 'X':
|
||
flags |= FLAG_NR_AR_ATTACK;
|
||
cmdp++;
|
||
break;
|
||
case 'e':
|
||
case 'E':
|
||
setEmulatorMem = true;
|
||
cmdp++;
|
||
break;
|
||
default:
|
||
PrintAndLogEx(WARNING, "Unknown parameter '%c'", param_getchar(Cmd, cmdp));
|
||
errors = true;
|
||
break;
|
||
}
|
||
}
|
||
|
||
//Validations
|
||
if (errors || cmdp == 0) return usage_hf_14a_sim();
|
||
|
||
if ( useUIDfromEML )
|
||
flags |= FLAG_UID_IN_EMUL;
|
||
|
||
UsbCommand c = {CMD_SIMULATE_TAG_ISO_14443a,{ tagtype, flags, 0 }};
|
||
memcpy(c.d.asBytes, uid, uidlen>>1);
|
||
clearCommandBuffer();
|
||
SendCommand(&c);
|
||
UsbCommand resp;
|
||
|
||
PrintAndLogEx(SUCCESS, "press pm3-button to abort simulation");
|
||
|
||
while( !ukbhit() ){
|
||
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500) ) continue;
|
||
if ( !(flags & FLAG_NR_AR_ATTACK) ) break;
|
||
if ( (resp.arg[0] & 0xffff) != CMD_SIMULATE_MIFARE_CARD ) break;
|
||
|
||
memcpy(data, resp.d.asBytes, sizeof(data) );
|
||
readerAttack(data[0], setEmulatorMem, verbose);
|
||
}
|
||
showSectorTable();
|
||
return 0;
|
||
}
|
||
|
||
int CmdHF14ASniff(const char *Cmd) {
|
||
int param = 0;
|
||
uint8_t ctmp;
|
||
for (int i = 0; i < 2; i++) {
|
||
ctmp = tolower(param_getchar(Cmd, i));
|
||
if (ctmp == 'h') return usage_hf_14a_sniff();
|
||
if (ctmp == 'c') param |= 0x01;
|
||
if (ctmp == 'r') param |= 0x02;
|
||
}
|
||
UsbCommand c = {CMD_SNOOP_ISO_14443a, {param, 0, 0}};
|
||
clearCommandBuffer();
|
||
SendCommand(&c);
|
||
return 0;
|
||
}
|
||
|
||
int ExchangeRAW14a(uint8_t *datain, int datainlen, bool activateField, bool leaveSignalON, uint8_t *dataout, int maxdataoutlen, int *dataoutlen) {
|
||
static bool responseNum = false;
|
||
uint16_t cmdc = 0;
|
||
*dataoutlen = 0;
|
||
|
||
if (activateField) {
|
||
responseNum = false;
|
||
UsbCommand resp;
|
||
|
||
// Anticollision + SELECT card
|
||
UsbCommand ca = {CMD_READER_ISO_14443a, {ISO14A_CONNECT | ISO14A_NO_DISCONNECT, 0, 0}};
|
||
SendCommand(&ca);
|
||
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
|
||
PrintAndLogEx(ERR, "Proxmark connection timeout.");
|
||
return 1;
|
||
}
|
||
|
||
// check result
|
||
if (resp.arg[0] == 0) {
|
||
PrintAndLogEx(ERR, "No card in field.");
|
||
return 1;
|
||
}
|
||
|
||
if (resp.arg[0] != 1 && resp.arg[0] != 2) {
|
||
PrintAndLogEx(ERR, "Card not in iso14443-4. res=%d.", resp.arg[0]);
|
||
return 1;
|
||
}
|
||
|
||
if (resp.arg[0] == 2) { // 0: couldn't read, 1: OK, with ATS, 2: OK, no ATS, 3: proprietary Anticollision
|
||
// get ATS
|
||
UsbCommand cr = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_APPEND_CRC | ISO14A_NO_DISCONNECT, 2, 0}};
|
||
uint8_t rats[] = { 0xE0, 0x80 }; // FSDI=8 (FSD=256), CID=0
|
||
memcpy(cr.d.asBytes, rats, 2);
|
||
SendCommand(&cr);
|
||
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
|
||
PrintAndLogEx(ERR, "Proxmark connection timeout.");
|
||
return 1;
|
||
}
|
||
|
||
if (resp.arg[0] <= 0) { // ats_len
|
||
PrintAndLogEx(ERR, "Can't get ATS.");
|
||
return 1;
|
||
}
|
||
}
|
||
}
|
||
|
||
if (leaveSignalON)
|
||
cmdc |= ISO14A_NO_DISCONNECT;
|
||
|
||
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_RAW | ISO14A_APPEND_CRC | cmdc, (datainlen & 0xFFFF) + 2, 0}};
|
||
uint8_t header[] = {0x0a | responseNum, 0x00};
|
||
responseNum ^= 1;
|
||
memcpy(c.d.asBytes, header, 2);
|
||
memcpy(&c.d.asBytes[2], datain, datainlen);
|
||
SendCommand(&c);
|
||
|
||
uint8_t *recv;
|
||
UsbCommand resp;
|
||
|
||
if (WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
|
||
recv = resp.d.asBytes;
|
||
int iLen = resp.arg[0];
|
||
|
||
if(!iLen) {
|
||
PrintAndLogEx(ERR, "No card response.");
|
||
return 1;
|
||
}
|
||
|
||
*dataoutlen = iLen - 2;
|
||
if (*dataoutlen < 0)
|
||
*dataoutlen = 0;
|
||
|
||
if (maxdataoutlen && *dataoutlen > maxdataoutlen) {
|
||
PrintAndLogEx(ERR, "Buffer too small(%d). Needs %d bytes", *dataoutlen, maxdataoutlen);
|
||
return 2;
|
||
}
|
||
|
||
if (recv[0] != header[0]) {
|
||
PrintAndLogEx(ERR, "iso14443-4 framing error. Card send %2x must be %2x", dataout[0], header[0]);
|
||
return 2;
|
||
}
|
||
|
||
memcpy(dataout, &recv[2], *dataoutlen);
|
||
|
||
// CRC Check
|
||
if (iLen == -1) {
|
||
PrintAndLogEx(ERR, "ISO 14443A CRC error.");
|
||
return 3;
|
||
}
|
||
|
||
|
||
} else {
|
||
PrintAndLogEx(ERR, "Reply timeout.");
|
||
return 4;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
int CmdExchangeAPDU(uint8_t *datain, int datainlen, bool activateField, uint8_t *dataout, int maxdataoutlen, int *dataoutlen, bool *chaining) {
|
||
uint16_t cmdc = 0;
|
||
|
||
*chaining = false;
|
||
|
||
if (activateField) {
|
||
cmdc |= ISO14A_CONNECT;
|
||
}
|
||
|
||
// "Command APDU" length should be 5+255+1, but javacard's APDU buffer might be smaller - 133 bytes
|
||
// https://stackoverflow.com/questions/32994936/safe-max-java-card-apdu-data-command-and-respond-size
|
||
// here length USB_CMD_DATA_SIZE=512
|
||
// timeout must be authomatically set by "get ATS"
|
||
UsbCommand c = {CMD_READER_ISO_14443a, {ISO14A_APDU | ISO14A_NO_DISCONNECT | cmdc, (datainlen & 0xFFFF), 0}};
|
||
memcpy(c.d.asBytes, datain, datainlen);
|
||
SendCommand(&c);
|
||
|
||
uint8_t *recv;
|
||
UsbCommand resp;
|
||
|
||
if (activateField) {
|
||
if (!WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
|
||
PrintAndLogEx(ERR, "APDU: Proxmark connection timeout.");
|
||
return 1;
|
||
}
|
||
if (resp.arg[0] != 1) {
|
||
PrintAndLogEx(ERR, "APDU: Proxmark error %d.", resp.arg[0]);
|
||
DropField();
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
if (WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
|
||
recv = resp.d.asBytes;
|
||
int iLen = resp.arg[0];
|
||
uint8_t res = resp.arg[1];
|
||
|
||
int dlen = iLen - 2;
|
||
if (dlen < 0)
|
||
dlen = 0;
|
||
*dataoutlen += dlen;
|
||
|
||
if (maxdataoutlen && *dataoutlen > maxdataoutlen) {
|
||
PrintAndLogEx(ERR, "APDU: Buffer too small(%d). Needs %d bytes", *dataoutlen, maxdataoutlen);
|
||
return 2;
|
||
}
|
||
|
||
if(!iLen) {
|
||
PrintAndLogEx(ERR, "APDU: No APDU response.");
|
||
return 1;
|
||
}
|
||
|
||
// check apdu length
|
||
if (iLen < 4 && iLen >= 0) {
|
||
PrintAndLogEx(ERR, "APDU: Small APDU response. Len=%d", iLen);
|
||
return 2;
|
||
}
|
||
|
||
// check block TODO
|
||
if (iLen == -2) {
|
||
PrintAndLogEx(ERR, "APDU: Block type mismatch.");
|
||
return 2;
|
||
}
|
||
|
||
memcpy(dataout, recv, dlen);
|
||
|
||
// chaining
|
||
if ((res & 0x10) != 0) {
|
||
*chaining = true;
|
||
}
|
||
|
||
// CRC Check
|
||
if (iLen == -1) {
|
||
PrintAndLogEx(ERR, "APDU: ISO 14443A CRC error.");
|
||
return 3;
|
||
}
|
||
} else {
|
||
PrintAndLogEx(ERR, "APDU: Reply timeout.");
|
||
return 4;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
int ExchangeAPDU14a(uint8_t *datain, int datainlen, bool activateField, bool leaveSignalON, uint8_t *dataout, int maxdataoutlen, int *dataoutlen) {
|
||
*dataoutlen = 0;
|
||
bool chaining = false;
|
||
|
||
int res = CmdExchangeAPDU(datain, datainlen, activateField, dataout, maxdataoutlen, dataoutlen, &chaining);
|
||
|
||
while (chaining) {
|
||
// I-block with chaining
|
||
res = CmdExchangeAPDU(NULL, 0, false, &dataout[*dataoutlen], maxdataoutlen, dataoutlen, &chaining);
|
||
|
||
if (res) {
|
||
if (!leaveSignalON)
|
||
DropField();
|
||
|
||
return 100;
|
||
}
|
||
}
|
||
|
||
if (!leaveSignalON)
|
||
DropField();
|
||
|
||
return 0;
|
||
}
|
||
|
||
// ISO14443-4. 7. Half-duplex block transmission protocol
|
||
int CmdHF14AAPDU(const char *cmd) {
|
||
uint8_t data[USB_CMD_DATA_SIZE];
|
||
int datalen = 0;
|
||
bool activateField = false;
|
||
bool leaveSignalON = false;
|
||
bool decodeTLV = false;
|
||
|
||
CLIParserInit("hf 14a apdu",
|
||
"Sends an ISO 7816-4 APDU via ISO 14443-4 block transmission protocol (T=CL)",
|
||
"Sample:\n\thf 14a apdu -st 00A404000E325041592E5359532E444446303100\n");
|
||
|
||
void* argtable[] = {
|
||
arg_param_begin,
|
||
arg_lit0("sS", "select", "activate field and select card"),
|
||
arg_lit0("kK", "keep", "leave the signal field ON after receive response"),
|
||
arg_lit0("tT", "tlv", "executes TLV decoder if it possible"),
|
||
arg_strx1(NULL, NULL, "<APDU (hex)>", NULL),
|
||
arg_param_end
|
||
};
|
||
CLIExecWithReturn(cmd, argtable, false);
|
||
|
||
activateField = arg_get_lit(1);
|
||
leaveSignalON = arg_get_lit(2);
|
||
decodeTLV = arg_get_lit(3);
|
||
// len = data + PCB(1b) + CRC(2b)
|
||
CLIGetHexBLessWithReturn(4, data, &datalen, 1 + 2);
|
||
|
||
CLIParserFree();
|
||
PrintAndLogEx(NORMAL, ">>>>[%s%s%s] %s", activateField ? "sel ": "", leaveSignalON ? "keep ": "", decodeTLV ? "TLV": "", sprint_hex(data, datalen));
|
||
|
||
int res = ExchangeAPDU14a(data, datalen, activateField, leaveSignalON, data, USB_CMD_DATA_SIZE, &datalen);
|
||
|
||
if (res)
|
||
return res;
|
||
|
||
PrintAndLogEx(NORMAL, "<<<< %s", sprint_hex(data, datalen));
|
||
|
||
PrintAndLogEx(SUCCESS, "APDU response: %02x %02x - %s", data[datalen - 2], data[datalen - 1], GetAPDUCodeDescription(data[datalen - 2], data[datalen - 1]));
|
||
|
||
// TLV decoder
|
||
if (decodeTLV && datalen > 4) {
|
||
TLVPrintFromBuffer(data, datalen - 2);
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
int CmdHF14ACmdRaw(const char *cmd) {
|
||
UsbCommand c = {CMD_READER_ISO_14443a, {0, 0, 0}};
|
||
bool reply = 1;
|
||
bool crc = false;
|
||
bool power = false;
|
||
bool active = false;
|
||
bool active_select = false;
|
||
bool no_rats = false;
|
||
uint16_t numbits = 0;
|
||
bool bTimeout = false;
|
||
uint32_t timeout = 0;
|
||
bool topazmode = false;
|
||
char buf[5]="";
|
||
int i = 0;
|
||
uint8_t data[USB_CMD_DATA_SIZE];
|
||
uint16_t datalen = 0;
|
||
uint32_t temp;
|
||
|
||
if (strlen(cmd) < 2) return usage_hf_14a_raw();
|
||
|
||
// strip
|
||
while (*cmd==' ' || *cmd=='\t') cmd++;
|
||
|
||
while (cmd[i]!='\0') {
|
||
if (cmd[i]==' ' || cmd[i]=='\t') { i++; continue; }
|
||
if (cmd[i]=='-') {
|
||
switch (cmd[i+1]) {
|
||
case 'H':
|
||
case 'h':
|
||
return usage_hf_14a_raw();
|
||
case 'r':
|
||
reply = false;
|
||
break;
|
||
case 'c':
|
||
crc = true;
|
||
break;
|
||
case 'p':
|
||
power = true;
|
||
break;
|
||
case 'a':
|
||
active = true;
|
||
break;
|
||
case 's':
|
||
active_select = true;
|
||
break;
|
||
case 'b':
|
||
sscanf(cmd+i+2, "%d", &temp);
|
||
numbits = temp & 0xFFFF;
|
||
i+=3;
|
||
while(cmd[i]!=' ' && cmd[i]!='\0') { i++; }
|
||
i-=2;
|
||
break;
|
||
case 't':
|
||
bTimeout = true;
|
||
sscanf(cmd+i+2, "%d", &temp);
|
||
timeout = temp;
|
||
i+=3;
|
||
while(cmd[i]!=' ' && cmd[i]!='\0') { i++; }
|
||
i-=2;
|
||
break;
|
||
case 'T':
|
||
topazmode = true;
|
||
break;
|
||
case '3':
|
||
no_rats = true;
|
||
break;
|
||
default:
|
||
return usage_hf_14a_raw();
|
||
}
|
||
i += 2;
|
||
continue;
|
||
}
|
||
if ((cmd[i]>='0' && cmd[i]<='9') ||
|
||
(cmd[i]>='a' && cmd[i]<='f') ||
|
||
(cmd[i]>='A' && cmd[i]<='F') ) {
|
||
buf[strlen(buf)+1] = 0;
|
||
buf[strlen(buf)] = cmd[i];
|
||
i++;
|
||
|
||
if (strlen(buf) >= 2) {
|
||
sscanf(buf, "%x", &temp);
|
||
data[datalen] = (uint8_t)(temp & 0xff);
|
||
*buf = 0;
|
||
if (++datalen >= sizeof(data)){
|
||
if (crc)
|
||
PrintAndLogEx(NORMAL, "Buffer is full, we can't add CRC to your data");
|
||
break;
|
||
}
|
||
}
|
||
continue;
|
||
}
|
||
PrintAndLogEx(NORMAL, "Invalid char on input");
|
||
return 0;
|
||
}
|
||
|
||
if (crc && datalen > 0 && datalen < sizeof(data)-2) {
|
||
uint8_t first, second;
|
||
if (topazmode) {
|
||
compute_crc(CRC_14443_B, data, datalen, &first, &second);
|
||
} else {
|
||
compute_crc(CRC_14443_A, data, datalen, &first, &second);
|
||
}
|
||
data[datalen++] = first;
|
||
data[datalen++] = second;
|
||
}
|
||
|
||
if (active || active_select) {
|
||
c.arg[0] |= ISO14A_CONNECT;
|
||
if (active)
|
||
c.arg[0] |= ISO14A_NO_SELECT;
|
||
}
|
||
|
||
if (bTimeout){
|
||
#define MAX_TIMEOUT 40542464 // = (2^32-1) * (8*16) / 13560000Hz * 1000ms/s
|
||
c.arg[0] |= ISO14A_SET_TIMEOUT;
|
||
if(timeout > MAX_TIMEOUT) {
|
||
timeout = MAX_TIMEOUT;
|
||
PrintAndLogEx(NORMAL, "Set timeout to 40542 seconds (11.26 hours). The max we can wait for response");
|
||
}
|
||
c.arg[2] = 13560000 / 1000 / (8*16) * timeout; // timeout in ETUs (time to transfer 1 bit, approx. 9.4 us)
|
||
}
|
||
|
||
if (power) {
|
||
c.arg[0] |= ISO14A_NO_DISCONNECT;
|
||
}
|
||
|
||
if (datalen > 0) {
|
||
c.arg[0] |= ISO14A_RAW;
|
||
}
|
||
|
||
if (topazmode) {
|
||
c.arg[0] |= ISO14A_TOPAZMODE;
|
||
}
|
||
if (no_rats) {
|
||
c.arg[0] |= ISO14A_NO_RATS;
|
||
}
|
||
|
||
// Max buffer is USB_CMD_DATA_SIZE
|
||
datalen = (datalen > USB_CMD_DATA_SIZE) ? USB_CMD_DATA_SIZE : datalen;
|
||
|
||
c.arg[1] = (datalen & 0xFFFF) | ((uint32_t)(numbits << 16));
|
||
memcpy(c.d.asBytes, data, datalen);
|
||
|
||
clearCommandBuffer();
|
||
SendCommand(&c);
|
||
|
||
if (reply) {
|
||
int res = 0;
|
||
if (active_select)
|
||
res = waitCmd(1);
|
||
if (!res && datalen > 0)
|
||
waitCmd(0);
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
static int waitCmd(uint8_t iSelect) {
|
||
UsbCommand resp;
|
||
uint16_t len = 0;
|
||
|
||
if (WaitForResponseTimeout(CMD_ACK, &resp, 1500)) {
|
||
len = (resp.arg[0] & 0xFFFF);
|
||
if (iSelect){
|
||
len = (resp.arg[1] & 0xFFFF);
|
||
if (len){
|
||
PrintAndLogEx(NORMAL, "Card selected. UID[%i]:", len);
|
||
} else {
|
||
PrintAndLogEx(WARNING, "Can't select card.");
|
||
}
|
||
} else {
|
||
PrintAndLogEx(NORMAL, "received %i bytes", len);
|
||
}
|
||
|
||
if (!len)
|
||
return 1;
|
||
|
||
PrintAndLogEx(NORMAL, "%s", sprint_hex(resp.d.asBytes, len) );
|
||
} else {
|
||
PrintAndLogEx(WARNING, "timeout while waiting for reply.");
|
||
return 3;
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
int CmdHF14AAntiFuzz(const char *cmd) {
|
||
|
||
CLIParserInit("hf 14a antifuzz",
|
||
"Tries to fuzz the ISO14443a anticollision phase",
|
||
"Usage:\n"
|
||
"\thf 14a antifuzz -4\n");
|
||
|
||
void* argtable[] = {
|
||
arg_param_begin,
|
||
arg_lit0("4", NULL, "4 byte uid"),
|
||
arg_lit0("7", NULL, "7 byte uid"),
|
||
arg_lit0(NULL, "10", "10 byte uid"),
|
||
arg_param_end
|
||
};
|
||
CLIExecWithReturn(cmd, argtable, false);
|
||
|
||
uint8_t arg0 = FLAG_4B_UID_IN_DATA;
|
||
if (arg_get_lit(2))
|
||
arg0 = FLAG_7B_UID_IN_DATA;
|
||
if (arg_get_lit(3))
|
||
arg0 = FLAG_10B_UID_IN_DATA;
|
||
|
||
CLIParserFree();
|
||
UsbCommand c = {CMD_ANTIFUZZ_ISO_14443a, {arg0, 0, 0}};
|
||
clearCommandBuffer();
|
||
SendCommand(&c);
|
||
return 0;
|
||
}
|
||
|
||
static command_t CommandTable[] = {
|
||
{"help", CmdHelp, 1, "This help"},
|
||
{"list", CmdHF14AList, 0, "[Deprecated] List ISO 14443-a history"},
|
||
{"info", CmdHF14AInfo, 0, "Tag information"},
|
||
{"reader", CmdHF14AReader, 0, "Act like an ISO14443-a reader"},
|
||
{"cuids", CmdHF14ACUIDs, 0, "<n> Collect n>0 ISO14443-a UIDs in one go"},
|
||
{"sim", CmdHF14ASim, 0, "<UID> -- Simulate ISO 14443-a tag"},
|
||
{"sniff", CmdHF14ASniff, 0, "sniff ISO 14443-a traffic"},
|
||
{"apdu", CmdHF14AAPDU, 0, "Send ISO 14443-4 APDU to tag"},
|
||
{"raw", CmdHF14ACmdRaw, 0, "Send raw hex data to tag"},
|
||
{"antifuzz", CmdHF14AAntiFuzz, 0, "Fuzzing the anticollision phase. Warning! Readers may react strange"},
|
||
{NULL, NULL, 0, NULL}
|
||
};
|
||
|
||
int CmdHF14A(const char *Cmd) {
|
||
clearCommandBuffer();
|
||
CmdsParse(CommandTable, Cmd);
|
||
return 0;
|
||
}
|
||
|
||
int CmdHelp(const char *Cmd) {
|
||
CmdsHelp(CommandTable);
|
||
return 0;
|
||
}
|