mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-12-25 09:32:46 +08:00
225 lines
7.7 KiB
Makefile
225 lines
7.7 KiB
Makefile
#
|
|
# FPGA Makefile for all targets
|
|
#
|
|
# The top part of this Makefile is used to define custom options for a number of compilation targets
|
|
# To define an additional target simply look at the other defined targets and add a new TARGET entry with a unique number and the custom options required
|
|
|
|
XILINX_TOOLS_PREFIX=
|
|
|
|
# Copy update (only when destination is older or missing)
|
|
CP = cp -u
|
|
|
|
# Make directory, no error if already existing
|
|
MKDIR = mkdir -p
|
|
|
|
# Remove recursive, force
|
|
RMDIR = rm -rf
|
|
|
|
# Path to make
|
|
MAKE = make
|
|
|
|
# Custom prefix for build directories, each target is built into its own separate directory name formed by combining the PREFIX and TARGET names.
|
|
# This way the source is not polluted with build files and the build directories are left behind after compilation so logs and reports can be
|
|
# examined or can be easily deleted with "make clean"
|
|
PREFIX = __
|
|
|
|
# Options to be passed to XST
|
|
XST_OPTS_BASE = run
|
|
XST_OPTS_BASE += -ifn xst.prj
|
|
XST_OPTS_BASE += -ifmt mixed
|
|
XST_OPTS_BASE += -ofmt NGC
|
|
XST_OPTS_BASE += -lso xst.lso
|
|
XST_OPTS_BASE += -top fpga_top
|
|
XST_OPTS_BASE += -resource_sharing yes
|
|
|
|
# Optimizations for speed (default)
|
|
XST_OPTS_SPEED = -opt_mode Speed
|
|
XST_OPTS_SPEED += -opt_level 1
|
|
XST_OPTS_SPEED += -fsm_style lut
|
|
XST_OPTS_SPEED += -fsm_encoding auto
|
|
|
|
# Optimization for reduced space
|
|
XST_OPTS_AREA = -opt_mode area
|
|
XST_OPTS_AREA += -opt_level 2
|
|
XST_OPTS_AREA += -fsm_style bram
|
|
XST_OPTS_AREA += -fsm_encoding compact
|
|
|
|
# Types of selective module compilation:
|
|
# WITH_LF Enables selection of LF modules (and disables all HF)
|
|
|
|
# To enable these modules WITH_LF _MUST_ be defined
|
|
# WITH_LF0 enable LF reader (generic)
|
|
# WITH_LF1 enable LF edge detect (generic)
|
|
# WITH_LF2 enable LF passthrough
|
|
# WITH_LF3 enable LF ADC (read/write)
|
|
|
|
# To enable these modules WITH_LF _MUST_NOT_ be defined
|
|
# WITH_HF0 enable HF reader (see also WITH_HF_15 below)
|
|
# WITH_HF_15 select "iso15 2sc mode" extensions instead of original
|
|
# WITH_HF1 enable HF simulated tag
|
|
# WITH_HF2 enable HF ISO14443-A
|
|
# WITH_HF3 enable sniff
|
|
# WITH_HF4 enable HF ISO18092 FeliCa
|
|
# WITH_HF5 enable HF get trace
|
|
|
|
# RDV40/Generic - Enable LF and all the LF modules
|
|
TARGET1_OPTIONS = -define \{WITH_LF WITH_LF0 WITH_LF1 WITH_LF2 WITH_LF3\}
|
|
# RDV40/Generic - Enable all HF modules except Felica
|
|
TARGET2_OPTIONS = -define \{WITH_HF0 WITH_HF1 WITH_HF2 WITH_HF3 WITH_HF5\}
|
|
# RDV40/Generic - Enable all HF modules except Felica and ISO14443, select HF_15 instead of HF
|
|
TARGET3_OPTIONS = -define \{WITH_HF0 WITH_HF1 WITH_HF3 WITH_HF5 WITH_HF_15 WITH_HF_15_LOWSIGNAL\}
|
|
# RDV40/Generic - Enable all HF modules except ISO14443
|
|
TARGET4_OPTIONS = -define \{WITH_HF0 WITH_HF1 WITH_HF3 WITH_HF4 WITH_HF5\}
|
|
# ICOPYX
|
|
TARGET5_OPTIONS = -define {PM3ICOPYX} -rtlview Yes
|
|
|
|
# Here we list the target names
|
|
TARGET1_NAME = fpga_pm3_lf
|
|
TARGET2_NAME = fpga_pm3_hf
|
|
TARGET3_NAME = fpga_pm3_hf_15
|
|
TARGET4_NAME = fpga_pm3_felica
|
|
TARGET5_NAME = fpga_icopyx_hf
|
|
|
|
# Targets can be compiled for different FPGA flavours
|
|
TARGET1_FPGA = xc2s30-5-vq100
|
|
TARGET2_FPGA = $(TARGET1_FPGA)
|
|
TARGET3_FPGA = $(TARGET1_FPGA)
|
|
TARGET4_FPGA = $(TARGET1_FPGA)
|
|
TARGET5_FPGA = xc3s100e-4-vq100
|
|
|
|
# Assemble the final XST options for each target
|
|
TARGET1_XST_OPTS = $(XST_OPTS_BASE) $(XST_OPTS_AREA) -p $(TARGET1_FPGA) -ofn $(TARGET1_NAME) $(TARGET1_OPTIONS)
|
|
TARGET2_XST_OPTS = $(XST_OPTS_BASE) $(XST_OPTS_AREA) -p $(TARGET2_FPGA) -ofn $(TARGET2_NAME) $(TARGET2_OPTIONS)
|
|
TARGET3_XST_OPTS = $(XST_OPTS_BASE) $(XST_OPTS_AREA) -p $(TARGET3_FPGA) -ofn $(TARGET3_NAME) $(TARGET3_OPTIONS)
|
|
TARGET4_XST_OPTS = $(XST_OPTS_BASE) $(XST_OPTS_AREA) -p $(TARGET4_FPGA) -ofn $(TARGET4_NAME) $(TARGET4_OPTIONS)
|
|
TARGET5_XST_OPTS = $(XST_OPTS_BASE) $(XST_OPTS_SPEED) -p $(TARGET5_FPGA) -ofn $(TARGET5_NAME) $(TARGET5_OPTIONS)
|
|
|
|
# these files are common for all targets
|
|
TARGET_COMMON_FILES = define.v
|
|
TARGET_COMMON_FILES += mux8.v
|
|
TARGET_COMMON_FILES += clk_divider.v
|
|
TARGET_COMMON_FILES += lp20khz_1MSa_iir_filter.v
|
|
TARGET_COMMON_FILES += min_max_tracker.v
|
|
TARGET_COMMON_FILES += hi_flite.v
|
|
TARGET_COMMON_FILES += hi_get_trace.v
|
|
TARGET_COMMON_FILES += hi_iso14443a.v
|
|
TARGET_COMMON_FILES += hi_reader.v
|
|
TARGET_COMMON_FILES += hi_simulate.v
|
|
TARGET_COMMON_FILES += hi_sniffer.v
|
|
TARGET_COMMON_FILES += lf_edge_detect.v
|
|
TARGET_COMMON_FILES += lo_adc.v
|
|
TARGET_COMMON_FILES += lo_edge_detect.v
|
|
TARGET_COMMON_FILES += lo_passthru.v
|
|
TARGET_COMMON_FILES += lo_read.v
|
|
|
|
# Add the files that are unique per target and all the common files
|
|
TARGET1_FILES = $(TARGET_COMMON_FILES) fpga_pm3_top.v
|
|
TARGET2_FILES = $(TARGET1_FILES)
|
|
TARGET3_FILES = $(TARGET1_FILES)
|
|
TARGET4_FILES = $(TARGET1_FILES)
|
|
TARGET5_FILES = $(TARGET_COMMON_FILES) mux2_onein.v mux2_oneout.v fpga_icopyx_hf.v fpga_icopyx_lf.v fpga_icopyx_top.v
|
|
|
|
# List of all valid target FPGA images to build
|
|
TARGETS = $(TARGET1_NAME) $(TARGET2_NAME) $(TARGET3_NAME) $(TARGET4_NAME) $(TARGET5_NAME)
|
|
|
|
# Verbosity type for ISE tools ise|xflow|silent
|
|
VERBOSITY = -intstyle silent
|
|
# Echo (Q=) or not echo (Q=@) build commands to the terminal
|
|
Q=@
|
|
|
|
# Pass the custom variables to the lower make rules
|
|
$(TARGET1_NAME).bit: TARGET_FPGA = $(TARGET1_FPGA)
|
|
$(TARGET1_NAME).bit: TARGET_FILES = $(TARGET1_FILES)
|
|
$(TARGET1_NAME).bit: TARGET_XST_OPTS = $(TARGET1_XST_OPTS)
|
|
|
|
$(TARGET2_NAME).bit: TARGET_FPGA = $(TARGET2_FPGA)
|
|
$(TARGET2_NAME).bit: TARGET_FILES = $(TARGET2_FILES)
|
|
$(TARGET2_NAME).bit: TARGET_XST_OPTS = $(TARGET2_XST_OPTS)
|
|
|
|
$(TARGET3_NAME).bit: TARGET_FPGA = $(TARGET3_FPGA)
|
|
$(TARGET3_NAME).bit: TARGET_FILES = $(TARGET3_FILES)
|
|
$(TARGET3_NAME).bit: TARGET_XST_OPTS = $(TARGET3_XST_OPTS)
|
|
|
|
$(TARGET4_NAME).bit: TARGET_FPGA = $(TARGET4_FPGA)
|
|
$(TARGET4_NAME).bit: TARGET_FILES = $(TARGET4_FILES)
|
|
$(TARGET4_NAME).bit: TARGET_XST_OPTS = $(TARGET4_XST_OPTS)
|
|
|
|
$(TARGET5_NAME).bit: TARGET_FPGA = $(TARGET5_FPGA)
|
|
$(TARGET5_NAME).bit: TARGET_FILES = $(TARGET5_FILES)
|
|
$(TARGET5_NAME).bit: TARGET_XST_OPTS = $(TARGET5_XST_OPTS)
|
|
|
|
$(TARGETS):
|
|
$(Q)$(MKDIR) $(PREFIX)build_$@
|
|
$(Q)$(MAKE) -C $(PREFIX)build_$@ -f ../Makefile $(notdir $@).bit
|
|
|
|
work:
|
|
$(Q)$(RM) xst.prj
|
|
$(Q)for item in $(TARGET_FILES); do echo verilog work ../$$item>>xst.prj; done
|
|
$(Q)echo work> xst.lso
|
|
|
|
%.xst: work
|
|
$(Q)$(RM) $@
|
|
$(Q)echo $(TARGET_XST_OPTS)> $@
|
|
|
|
%.ngc: %.xst
|
|
$(Q)$(RM) $@
|
|
$(info [-] XST $@)
|
|
$(Q)$(XILINX_TOOLS_PREFIX)xst $(VERBOSITY) -ifn $<
|
|
|
|
%.ngd: %.ngc
|
|
$(Q)$(RM) $@
|
|
$(info [-] NGD $@)
|
|
$(Q)$(XILINX_TOOLS_PREFIX)ngdbuild $(VERBOSITY) -quiet -p $(TARGET_FPGA) -nt timestamp -uc ../$(TARGET_FPGA).ucf $< $@
|
|
|
|
%_map.ncd: %.ngd
|
|
$(Q)$(RM) $@
|
|
$(info [-] MAP $@)
|
|
$(Q)$(XILINX_TOOLS_PREFIX)map $(VERBOSITY) -p $(TARGET_FPGA) -o $*_map $*
|
|
|
|
%.ncd: %_map.ncd
|
|
$(Q)$(RM) $@
|
|
$(info [-] PAR $@)
|
|
$(Q)$(XILINX_TOOLS_PREFIX)par $(VERBOSITY) -w $< $@
|
|
|
|
%.bit: %.ncd
|
|
# Hacky hack, make empty files for icopyx
|
|
if echo "$@" | grep -qi "icopyx"; then \
|
|
truncate -s0 ../fpga_icopyx_lf.bit; \
|
|
truncate -s0 ../fpga_icopyx_hf_15.bit; \
|
|
truncate -s0 ../fpga_icopyx_felica.bit; \
|
|
fi
|
|
$(Q)$(RM) $@ $*.drc $*.rbt
|
|
$(info [=] BITGEN $@)
|
|
$(Q)$(XILINX_TOOLS_PREFIX)bitgen $(VERBOSITY) -w $* $@
|
|
$(Q)$(CP) $@ ..
|
|
|
|
# Build all targets
|
|
all: $(TARGETS)
|
|
|
|
# ALWAYS have some hardcoded text after $(PREFIX) to avoid rm -rf * or rm -rf /* situations if PREFIX is incorrectly set to empty "" or just "/"
|
|
clean:
|
|
$(Q)$(RMDIR) $(PREFIX)build_*
|
|
$(info [-] Build files deleted)
|
|
|
|
.DEFAULT:
|
|
@if [ "$@" != "all" ] && [ ! "$(filter $@,$(TARGETS))" ]; then \
|
|
make help; \
|
|
else \
|
|
make all; \
|
|
fi
|
|
|
|
.PHONY: all help clean
|
|
|
|
help:
|
|
@echo "################################################################"
|
|
@echo "#"
|
|
@echo "# <target> - Builds only one of the above listed targets"
|
|
@echo "# all - Builds the FPGA bitstreams for all targets"
|
|
@echo "# clean - Keeps .bit files but cleans intermediate build files for all targets"
|
|
@echo "#"
|
|
@echo "#"
|
|
@echo "# Valid targets are:"
|
|
@echo "# $(TARGETS)"
|
|
@echo "#"
|
|
@echo "################################################################"
|
|
|