mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-12-25 09:32:46 +08:00
100 lines
2.9 KiB
Verilog
100 lines
2.9 KiB
Verilog
//-----------------------------------------------------------------------------
|
|
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
|
|
//
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
//
|
|
// See LICENSE.txt for the text of the license.
|
|
//-----------------------------------------------------------------------------
|
|
//
|
|
// There are two modes:
|
|
// - lf_ed_toggle_mode == 0: the output is set low (resp. high) when a low
|
|
// (resp. high) edge/peak is detected, with hysteresis
|
|
// - lf_ed_toggle_mode == 1: the output is toggling whenever an edge/peak
|
|
// is detected.
|
|
// That way you can detect two consecutive edges/peaks at the same level (L/H)
|
|
//
|
|
// Output:
|
|
// - ssp_frame (wired to TIOA1 on the arm) for the edge detection/state
|
|
// - ssp_clk: cross_lo
|
|
|
|
module lo_edge_detect(
|
|
input pck0,
|
|
input pck_divclk,
|
|
input [7:0] adc_d,
|
|
input cross_lo,
|
|
input lf_field,
|
|
input lf_ed_toggle_mode,
|
|
input [7:0] lf_ed_threshold,
|
|
input ssp_dout,
|
|
|
|
output ssp_frame,
|
|
output ssp_clk,
|
|
output adc_clk,
|
|
output pwr_lo,
|
|
output pwr_hi,
|
|
output pwr_oe1,
|
|
output pwr_oe2,
|
|
output pwr_oe3,
|
|
output pwr_oe4,
|
|
output debug
|
|
);
|
|
|
|
wire tag_modulation = ssp_dout & !lf_field;
|
|
wire reader_modulation = !ssp_dout & lf_field & pck_divclk;
|
|
|
|
// No logic, straight through.
|
|
assign pwr_oe1 = 1'b0; // not used in LF mode
|
|
assign pwr_oe3 = 1'b0; // base antenna load = 33 Ohms
|
|
// when modulating, add another 33 Ohms and 10k Ohms in parallel:
|
|
assign pwr_oe2 = tag_modulation;
|
|
assign pwr_oe4 = tag_modulation;
|
|
|
|
assign ssp_clk = cross_lo;
|
|
assign pwr_lo = reader_modulation;
|
|
assign pwr_hi = 1'b0;
|
|
|
|
// filter the ADC values
|
|
wire data_rdy;
|
|
wire [7:0] adc_filtered;
|
|
assign adc_clk = pck0;
|
|
|
|
lp20khz_1MSa_iir_filter adc_filter(
|
|
.clk (pck0),
|
|
.adc_d (adc_d),
|
|
.rdy (data_rdy),
|
|
.out (adc_filtered)
|
|
);
|
|
|
|
// detect edges
|
|
wire [7:0] high_threshold, highz_threshold, lowz_threshold, low_threshold;
|
|
wire [7:0] max, min;
|
|
wire edge_state, edge_toggle;
|
|
|
|
lf_edge_detect lf_ed(
|
|
.clk (pck0),
|
|
.adc_d (adc_filtered),
|
|
.lf_ed_threshold (lf_ed_threshold),
|
|
.max (max),
|
|
.min (min),
|
|
.high_threshold (high_threshold),
|
|
.highz_threshold (highz_threshold),
|
|
.lowz_threshold (lowz_threshold),
|
|
.low_threshold (low_threshold),
|
|
.edge_state (edge_state),
|
|
.edge_toggle (edge_toggle)
|
|
);
|
|
|
|
assign debug = lf_ed_toggle_mode ? edge_toggle : edge_state;
|
|
|
|
assign ssp_frame = lf_ed_toggle_mode ? edge_toggle : edge_state;
|
|
|
|
endmodule
|
|
|