mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-11 10:14:34 +08:00
554 lines
19 KiB
Lua
554 lines
19 KiB
Lua
local utils = require('utils')
|
|
local cmds = require('commands')
|
|
local getopt = require('getopt')
|
|
local ansicolors = require('ansicolors')
|
|
|
|
--[[
|
|
script to create a clone-dump with new crc
|
|
Author: mosci
|
|
my Fork: https://github.com/icsom/proxmark3.git
|
|
|
|
1. read tag-dump, xor byte 22..end with byte 0x05 of the inputfile
|
|
2. write to outfile
|
|
3. set byte 0x05 to newcrc
|
|
4. until byte 0x21 plain like in inputfile
|
|
5. from 0x22..end xored with newcrc
|
|
6. calculate new crc on each segment (needs to know the new MCD & MSN0..2)
|
|
|
|
simplest usage:
|
|
Dump a legic tag with 'hf legic dump'
|
|
place your 'empty' tag on the reader and run
|
|
'script run hf_legic_clone -i orig.bin -w'
|
|
|
|
you will see some output like:
|
|
|
|
read 1024 bytes from orig.bin
|
|
|
|
place your empty tag onto the PM3 to read and display the MCD & MSN0..2
|
|
the values will be shown below
|
|
confirm when ready [y/n] ?y
|
|
|
|
0b ad c0 de <- !! here you'll see the MCD & MSN of your empty tag, which has to be typed in manually as seen below !!
|
|
type in MCD as 2-digit value - e.g.: 00 (default: 79 )
|
|
> 0b
|
|
type in MSN0 as 2-digit value - e.g.: 01 (default: 28 )
|
|
> ad
|
|
type in MSN1 as 2-digit value - e.g.: 02 (default: d1 )
|
|
> c0
|
|
type in MSN2 as 2-digit value - e.g.: 03 (default: 43 )
|
|
> de
|
|
MCD:0b, MSN:ad c0 de, MCC:79 <- this crc is calculated from the MCD & MSN and must match the one on yout empty tag
|
|
|
|
wrote 1024 bytes to myLegicClone.hex
|
|
enter number of bytes to write? (default: 86 )
|
|
|
|
loaded 1024 samples
|
|
#db# setting up legic card
|
|
#db# MIM 256 card found, writing 0x00 - 0x01 ...
|
|
#db# write successful
|
|
...
|
|
#db# setting up legic card
|
|
#db# MIM 256 card found, writing 0x56 - 0x01 ...
|
|
#db# write successful
|
|
proxmark3>
|
|
|
|
the default value (number of bytes to write) is calculated over all valid segments and should be ok - just hit enter, wait until write has finished
|
|
and your clone should be ready (except there has to be a additional KGH-CRC to be calculated - which credentials are unknown until yet)
|
|
|
|
the '-w' switch will only work with my fork - it needs the binary legic_crc8 which is not part of the proxmark3-master-branch
|
|
also the ability to write DCF is not possible with the proxmark3-master-branch
|
|
but creating dumpfile-clone files will be possible (without valid segment-crc - this has to done manually with)
|
|
|
|
|
|
(example) Legic-Prime Layout with 'Kaba Group Header'
|
|
+----+----+----+----+----+----+----+----+
|
|
0x00|MCD |MSN0|MSN1|MSN2|MCC | 60 | ea | 9f |
|
|
+----+----+----+----+----+----+----+----+
|
|
0x08| ff | 00 | 00 | 00 | 11 |Bck0|Bck1|Bck2|
|
|
+----+----+----+----+----+----+----+----+
|
|
0x10|Bck3|Bck4|Bck5|BCC | 00 | 00 |Seg0|Seg1|
|
|
+----+----+----+----+----+----+----+----+
|
|
0x18|Seg2|Seg3|SegC|Stp0|Stp1|Stp2|Stp3|UID0|
|
|
+----+----+----+----+----+----+----+----+
|
|
0x20|UID1|UID2|kghC|
|
|
+----+----+----+
|
|
|
|
MCD= ManufacturerID (1 Byte)
|
|
MSN0..2= ManufactureSerialNumber (3 Byte)
|
|
MCC= CRC (1 Byte) calculated over MCD,MSN0..2
|
|
DCF= DecrementalField (2 Byte) 'credential' (enduser-Tag) seems to have always DCF-low=0x60 DCF-high=0xea
|
|
Bck0..5= Backup (6 Byte) Bck0 'dirty-flag', Bck1..5 SegmentHeader-Backup
|
|
BCC= BackupCRC (1 Byte) CRC calculated over Bck1..5
|
|
Seg0..3= SegmentHeader (on MIM 4 Byte )
|
|
SegC= SegmentCRC (1 Byte) calculated over MCD,MSN0..2,Seg0..3
|
|
Stp0..n= Stamp0... (variable length) length = Segment-Len - UserData - 1
|
|
UID0..n= UserDater (variable length - with KGH hex 0x00-0x63 / dec 0-99) length = Segment-Len - WRP - WRC - 1
|
|
kghC= KabaGroupHeader (1 Byte + addr 0x0c must be 0x11)
|
|
as seen on this example: addr 0x05..0x08 & 0x0c must have been set to this values - otherwise kghCRC will not be created by a official reader (not accepted)
|
|
--]]
|
|
|
|
copyright = ''
|
|
author = 'Mosci'
|
|
version = 'v1.0.2'
|
|
desc = [[
|
|
This is a script which creates a clone-dump of a dump from a LEGIC Prime Tag (MIM256 or MIM1024)
|
|
Create a dump by running `hf legic dump`.
|
|
]]
|
|
example = [[
|
|
script run hf_legic_clone -i my_dump.bin -o my_clone.bin -c f8
|
|
script run hf_legic_clone -i my_dump.bin -d -s
|
|
]]
|
|
usage = [[
|
|
script run hf_legic_clone [-h] [-i <file>] [-o <file>] [-c <crc>] [-d] [-s] [-w]
|
|
]]
|
|
arguments = [[
|
|
required :
|
|
-i <input file> - file to read data from, must be in binary format (*.bin)
|
|
|
|
optional :
|
|
-h - Help text
|
|
-o <output file> - requires option -c to be given
|
|
-c <new-tag crc> - requires option -o to be given
|
|
-d - Display content of found Segments
|
|
-s - Display summary at the end
|
|
-w - write directly to tag - a file hf-legic-UID-dump.bin will also be generated
|
|
|
|
e.g.:
|
|
hint: using the CRC '00' will result in a plain dump ( -c 00 )
|
|
]]
|
|
local DEBUG = true
|
|
local bxor = bit32.bxor
|
|
---
|
|
-- This is only meant to be used when errors occur
|
|
local function dbg(args)
|
|
if not DEBUG then return end
|
|
if type(args) == 'table' then
|
|
local i = 1
|
|
while args[i] do
|
|
dbg(args[i])
|
|
i = i+1
|
|
end
|
|
else
|
|
print('###', args)
|
|
end
|
|
end
|
|
-- we need always 2 digits
|
|
local function prepend_zero(s)
|
|
if s == nil then return '..' end
|
|
|
|
if (#s == 1) then
|
|
return '0' .. s
|
|
else
|
|
if (#s == 0) then
|
|
return '00'
|
|
else
|
|
return s
|
|
end
|
|
end
|
|
end
|
|
---
|
|
-- This is only meant to be used when errors occur
|
|
local function oops(err)
|
|
print('ERROR:', err)
|
|
core.clearCommandBuffer()
|
|
return nil, err
|
|
end
|
|
---
|
|
-- Usage help
|
|
local function help()
|
|
print(copyright)
|
|
print(author)
|
|
print(version)
|
|
print(desc)
|
|
print(ansicolors.cyan..'Usage'..ansicolors.reset)
|
|
print(usage)
|
|
print(ansicolors.cyan..'Arguments'..ansicolors.reset)
|
|
print(arguments)
|
|
print(ansicolors.cyan..'Example usage'..ansicolors.reset)
|
|
print(example)
|
|
end
|
|
-- read LEGIC data
|
|
local function readlegicdata(offset, length, iv)
|
|
-- Read data
|
|
local d0 = ('%04X%04X%02X'):format(offset, len, iv)
|
|
local c = Command:newNG{cmd = cmds.CMD_HF_LEGIC_READER, data = d0}
|
|
local result, err = c:sendNG()
|
|
if not result then return oops(err) end
|
|
-- result is a packed data structure, data starts at offset 33
|
|
return result
|
|
end
|
|
|
|
-- Check availability of file
|
|
local function file_check(file_name)
|
|
local exists = io.open(file_name, "r")
|
|
if not exists then
|
|
exists = false
|
|
else
|
|
exists = true
|
|
end
|
|
return exists
|
|
end
|
|
|
|
--- xor-wrapper
|
|
-- xor all from addr 0x22 (start counting from 1 => 23)
|
|
local function xorme(hex, xor, index)
|
|
if ( index >= 23 ) then
|
|
return ('%02x'):format(bxor( tonumber(hex, 16) , tonumber(xor, 16) ))
|
|
else
|
|
return hex
|
|
end
|
|
end
|
|
|
|
-- read input-file into array
|
|
local function getInputBytes(infile)
|
|
local bytes = {}
|
|
local f = io.open(infile, "rb")
|
|
if f == nil then print("OOps ... failed to read from file ".. infile); return false; end
|
|
|
|
local str = f:read("*all")
|
|
f:close()
|
|
|
|
for c in (str or ''):gmatch'.' do
|
|
bytes[#bytes + 1] = ('%02x'):format(c:byte())
|
|
end
|
|
|
|
print("\nread ".. #bytes .." bytes from "..ansicolors.yellow..infile..ansicolors.reset)
|
|
return bytes
|
|
end
|
|
|
|
-- write to file
|
|
local function writeOutputBytes(bytes, outfile)
|
|
local fho,err = io.open(outfile, "wb")
|
|
if err then print("OOps ... failed to open output-file ".. outfile); return false; end
|
|
|
|
for i = 1, #bytes do
|
|
fho:write(string.char(tonumber(bytes[i], 16)))
|
|
end
|
|
fho:close()
|
|
print("\nwrote ".. #bytes .." bytes to " .. outfile)
|
|
return true
|
|
end
|
|
|
|
-- xore certain bytes
|
|
local function xorBytes(inBytes, crc)
|
|
local bytes = {}
|
|
for index = 1, #inBytes do
|
|
bytes[index] = xorme(inBytes[index], crc, index)
|
|
end
|
|
if (#inBytes == #bytes) then
|
|
-- replace crc
|
|
bytes[5] = string.sub(crc, -2)
|
|
return bytes
|
|
else
|
|
print("error: byte-count missmatch")
|
|
return false
|
|
end
|
|
end
|
|
|
|
-- get raw segment-data
|
|
local function getSegmentData(bytes, start, index)
|
|
local raw, len, valid, last, wrp, wrc, rd, crc
|
|
local segment = {}
|
|
segment[0] = bytes[start]..' '..bytes[start + 1]..' '..bytes[start + 2]..' '..bytes[start + 3]
|
|
-- flag = high nibble of byte 1
|
|
segment[1] = string.sub(bytes[start + 1], 0, 1)
|
|
|
|
-- valid = bit 6 of byte 1
|
|
segment[2] = tonumber(bit32.extract('0x'..bytes[start + 1], 6, 1), 16)
|
|
|
|
-- last = bit 7 of byte 1
|
|
segment[3] = tonumber(bit32.extract('0x'..bytes[start + 1], 7, 1), 16)
|
|
|
|
-- len = (byte 0)+(bit0-3 of byte 1)
|
|
segment[4] = tonumber(('%03x'):format(tonumber(bit32.extract('0x'..bytes[start + 1], 0, 3), 16)..tonumber(bytes[start], 16)), 16)
|
|
|
|
-- wrp (write proteted) = byte 2
|
|
segment[5] = tonumber(bytes[start + 2])
|
|
|
|
-- wrc (write control) - bit 4-6 of byte 3
|
|
segment[6] = tonumber(bit32.extract('0x'..bytes[start + 3], 4, 3), 16)
|
|
|
|
-- rd (read disabled) - bit 7 of byte 3
|
|
segment[7] = tonumber(bit32.extract('0x'..bytes[start + 3], 7, 1), 16)
|
|
|
|
-- crc byte 4
|
|
segment[8] = bytes[start + 4]
|
|
|
|
-- segment index
|
|
segment[9] = index
|
|
|
|
-- # crc-byte
|
|
segment[10] = start + 4
|
|
return segment
|
|
end
|
|
|
|
--- Kaba Group Header
|
|
-- checks if a segment does have a kghCRC
|
|
-- returns boolean false if no kgh has being detected or the kghCRC if a kgh was detected
|
|
local function CheckKgh(bytes, segStart, segEnd)
|
|
if (bytes[8] == '9f' and bytes[9] == 'ff' and bytes[13] == '11') then
|
|
local i
|
|
local data = {}
|
|
segStart = tonumber(segStart, 10)
|
|
segEnd = tonumber(segEnd, 10)
|
|
local dataLen = segEnd - segStart - 5
|
|
--- gather creadentials for verify
|
|
local WRP = bytes[(segStart + 2)]
|
|
local WRC = ("%02x"):format(tonumber(bit32.extract("0x"..bytes[segStart+3], 4, 3), 16))
|
|
local RD = ("%02x"):format(tonumber(bit32.extract("0x"..bytes[segStart+3], 7, 1), 16))
|
|
local XX = "00"
|
|
cmd = bytes[1]..bytes[2]..bytes[3]..bytes[4]..WRP..WRC..RD..XX
|
|
for i = (segStart + 5), (segStart + 5 + dataLen - 2) do
|
|
cmd = cmd..bytes[i]
|
|
end
|
|
local KGH = ("%02x"):format(utils.Crc8Legic(cmd))
|
|
if (KGH == bytes[segEnd - 1]) then
|
|
return KGH
|
|
else
|
|
return false
|
|
end
|
|
else
|
|
return false
|
|
end
|
|
end
|
|
|
|
-- get only the addresses of segemnt-crc's and the length of bytes
|
|
local function getSegmentCrcBytes(bytes)
|
|
local start = 23
|
|
local index = 0
|
|
local crcbytes = {}
|
|
repeat
|
|
seg = getSegmentData(bytes, start, index)
|
|
crcbytes[index] = seg[10]
|
|
start = start + seg[4]
|
|
index = index + 1
|
|
until (seg[3] == 1 or tonumber(seg[9]) == 126 )
|
|
crcbytes[index] = start
|
|
return crcbytes
|
|
end
|
|
|
|
-- print Segment values
|
|
local function printSegment(SegmentData)
|
|
res = "\nSegment "..SegmentData[9]..": "
|
|
res = res.. "raw header="..SegmentData[0]..", "
|
|
res = res.. "flag="..SegmentData[1].." (valid="..SegmentData[2].." last="..SegmentData[3].."), "
|
|
res = res.. "len="..("%04d"):format(SegmentData[4])..", "
|
|
res = res.. "WRP="..prepend_zero(SegmentData[5])..", "
|
|
res = res.. "WRC="..prepend_zero(SegmentData[6])..", "
|
|
res = res.. "RD="..SegmentData[7]..", "
|
|
res = res.. "crc="..SegmentData[8]
|
|
print(res)
|
|
end
|
|
|
|
-- print segment-data (hf legic info like)
|
|
local function displaySegments(bytes)
|
|
|
|
--display segment header(s)
|
|
start = 23
|
|
index = '00'
|
|
|
|
--repeat until last-flag ist set to 1 or segment-index has reached 126
|
|
repeat
|
|
wrc = ''
|
|
wrp = ''
|
|
pld = ''
|
|
Seg = getSegmentData(bytes, start, index)
|
|
if Seg == nil then return OOps("segment is nil") end
|
|
|
|
KGH = CheckKgh(bytes, start, (start + tonumber(Seg[4], 10)))
|
|
|
|
printSegment(Seg)
|
|
|
|
-- wrc
|
|
if (Seg[6] > 0) then
|
|
print("WRC protected area:")
|
|
-- length of wrc = wrc
|
|
for i = 1, Seg[6] do
|
|
-- starts at (segment-start + segment-header + segment-crc)-1
|
|
wrc = wrc..bytes[(start + 4 + 1 + i) - 1]..' '
|
|
end
|
|
print(wrc)
|
|
elseif (Seg[5] > 0) then
|
|
print("Remaining write protected area:")
|
|
-- length of wrp = (wrp-wrc)
|
|
for i = 1, (Seg[5] - Seg[6]) do
|
|
-- starts at (segment-start + segment-header + segment-crc + wrc)-1
|
|
wrp = wrp..bytes[(start + 4 + 1 + Seg[6] + i) - 1]..' '
|
|
end
|
|
print(wrp)
|
|
end
|
|
|
|
-- payload
|
|
print("Remaining segment payload:")
|
|
--length of payload = segment-len - segment-header - segment-crc - wrp -wrc
|
|
for i = 1, (Seg[4] - 4 - 1 - Seg[5] - Seg[6]) do
|
|
-- starts at (segment-start + segment-header + segment-crc + segment-wrp + segemnt-wrc)-1
|
|
pld = pld..bytes[(start + 4 + 1 + Seg[5] + Seg[6] + i) - 1]..' '
|
|
end
|
|
print(pld)
|
|
if (KGH) then
|
|
print(ansicolors.yellow.."'Kaba Group Header' detected"..ansicolors.reset)
|
|
end
|
|
start = start + Seg[4]
|
|
index = prepend_zero(tonumber(Seg[9]) + 1)
|
|
|
|
until (Seg[3] == 1 or tonumber(Seg[9]) == 126 )
|
|
end
|
|
|
|
-- write clone-data to tag
|
|
local function writeToTag(plainBytes)
|
|
local SegCrcs = {}
|
|
local output
|
|
local readbytes
|
|
if (utils.confirm("\nplace your empty tag onto the PM3 to restore the data of the input file\nthe CRCs will be calculated as needed\n confirm when ready") == false) then
|
|
return
|
|
end
|
|
|
|
readbytes = readlegicdata(0, 4, 0x55)
|
|
-- gather MCD & MSN from new Tag - this must be enterd manually
|
|
print("\nthese are the MCD MSN0 MSN1 MSN2 from the Tag that has being read:")
|
|
|
|
-- readbytes is a usbcommandOLD package, hence 32 bytes offset until data.
|
|
plainBytes[1] = ('%02x'):format(readbytes:byte(33))
|
|
plainBytes[2] = ('%02x'):format(readbytes:byte(34))
|
|
plainBytes[3] = ('%02x'):format(readbytes:byte(35))
|
|
plainBytes[4] = ('%02x'):format(readbytes:byte(36))
|
|
|
|
MCD = plainBytes[1]
|
|
MSN0 = plainBytes[2]
|
|
MSN1 = plainBytes[3]
|
|
MSN2 = plainBytes[4]
|
|
-- calculate crc8 over MCD & MSN
|
|
cmd = MCD..MSN0..MSN1..MSN2
|
|
MCC = ("%02x"):format(utils.Crc8Legic(cmd))
|
|
print("MCD:"..ansicolors.green..MCD..ansicolors.reset..", MSN:"..ansicolors.green..MSN0.." "..MSN1.." "..MSN2..ansicolors.reset..", MCC:"..MCC)
|
|
|
|
-- calculate new Segment-CRC for each valid segment
|
|
SegCrcs = getSegmentCrcBytes(plainBytes)
|
|
for i = 0, (#SegCrcs - 1) do
|
|
-- SegCrcs[i]-4 = address of first byte of segmentHeader (low byte segment-length)
|
|
segLen = tonumber(("%1x"):format(tonumber(bit32.extract("0x"..plainBytes[(SegCrcs[i] - 3)], 0, 3), 16))..("%02x"):format(tonumber(plainBytes[SegCrcs[i] - 4], 16)), 16)
|
|
segStart = (SegCrcs[i] - 4)
|
|
segEnd = (SegCrcs[i] - 4 + segLen)
|
|
KGH = CheckKgh(plainBytes, segStart, segEnd)
|
|
if (KGH) then
|
|
print("'Kaba Group Header' detected - re-calculate...")
|
|
end
|
|
cmd = MCD..MSN0..MSN1..MSN2..plainBytes[SegCrcs[i]-4]..plainBytes[SegCrcs[i]-3]..plainBytes[SegCrcs[i]-2]..plainBytes[SegCrcs[i]-1]
|
|
plainBytes[SegCrcs[i]] = ("%02x"):format(utils.Crc8Legic(cmd))
|
|
end
|
|
|
|
-- apply MCD & MSN to plain data
|
|
plainBytes[1] = MCD
|
|
plainBytes[2] = MSN0
|
|
plainBytes[3] = MSN1
|
|
plainBytes[4] = MSN2
|
|
plainBytes[5] = MCC
|
|
|
|
-- prepare plainBytes for writing (xor plain data with new MCC)
|
|
bytes = xorBytes(plainBytes, MCC)
|
|
|
|
-- write data to file
|
|
if (writeOutputBytes(bytes, "hf-legic-UID-dump.bin")) then
|
|
-- write pm3-buffer to Tag
|
|
cmd = ('hf legic restore -f hf-legic-UID-dump')
|
|
core.console(cmd)
|
|
end
|
|
end
|
|
|
|
-- main function
|
|
local function main(args)
|
|
-- some variables
|
|
local i = 0
|
|
local oldcrc, newcrc, infile, outfile
|
|
local bytes = {}
|
|
local segments = {}
|
|
|
|
-- parse arguments for the script
|
|
for o, a in getopt.getopt(args, 'hwsdc:i:o:') do
|
|
-- output file
|
|
if o == 'o' then
|
|
outfile = a
|
|
ofs = true
|
|
if (file_check(a)) then
|
|
local answer = utils.confirm('\nthe output-file '..a..' already exists!\nthis will delete the previous content!\ncontinue?')
|
|
if (answer == false) then return oops('quiting') end
|
|
end
|
|
end
|
|
-- input file
|
|
if o == 'i' then
|
|
infile = a
|
|
if (file_check(infile) == false) then return oops('input file: '..infile..' not found') end
|
|
|
|
bytes = getInputBytes(infile)
|
|
oldcrc = bytes[5]
|
|
ifs = true
|
|
if (bytes == false) then return oops('couldnt read file') end
|
|
|
|
i = i + 1
|
|
end
|
|
-- new crc
|
|
if o == 'c' then
|
|
newcrc = a:lower()
|
|
ncs = true
|
|
end
|
|
-- display segments switch
|
|
if o == 'd' then ds = true; end
|
|
-- display summary switch
|
|
if o == 's' then ss = true; end
|
|
-- write to tag switch
|
|
if o == 'w' then ws = true; end
|
|
-- help
|
|
if o == 'h' then return help() end
|
|
end
|
|
|
|
if (not ifs) then return oops('option -i <input file> is required') end
|
|
|
|
-- bytes to plain
|
|
bytes = xorBytes(bytes, oldcrc)
|
|
|
|
-- show segments (works only on plain bytes)
|
|
if (ds) then
|
|
print("+------------------------------------------- Segments -------------------------------------------+")
|
|
displaySegments(bytes);
|
|
end
|
|
|
|
if (ofs and ncs) then
|
|
-- xor bytes with new crc
|
|
newBytes = xorBytes(bytes, newcrc)
|
|
-- write output
|
|
if (writeOutputBytes(newBytes, outfile)) then
|
|
-- show summary if requested
|
|
if (ss) then
|
|
-- information
|
|
res = "\n+-------------------------------------------- Summary -------------------------------------------+"
|
|
res = res .."\ncreated clone_dump from\n\t"..infile.." crc: "..oldcrc.."\ndump_file:"
|
|
res = res .."\n\t"..outfile.." crc: "..string.sub(newcrc, -2)
|
|
res = res .."\nyou may load the new file with:"
|
|
res = res ..ansicolors.yellow.."hf legic eload -f "..outfile..ansicolors.reset
|
|
res = res .."\n\nif you don't write to tag immediately ('-w' switch) you will need to recalculate each segmentCRC"
|
|
res = res .."\nafter writing this dump to a tag!"
|
|
res = res .."\n\na segmentCRC gets calculated over MCD,MSN0..3, Segment-Header0..3"
|
|
res = res .."\ne.g. (based on Segment00 of the data from "..infile.."):"
|
|
res = res .."\n"
|
|
res = res ..ansicolors.yellow.."hf legic crc -d "..bytes[1]..bytes[2]..bytes[3]..bytes[4]..bytes[23]..bytes[24]..bytes[25]..bytes[26].." --mcc "..newcrc.." -t 8"..ansicolors.reset
|
|
-- this can not be calculated without knowing the new MCD, MSN0..2
|
|
print(res)
|
|
end
|
|
end
|
|
else
|
|
if (ss) then
|
|
-- show why the output-file was not written
|
|
print("\nnew file not written - some arguments are missing ..")
|
|
print("output file: ".. (ofs and outfile or "not given"))
|
|
print("new crc: ".. (ncs and newcrc or "not given"))
|
|
end
|
|
end
|
|
-- write to tag
|
|
if (ws and ( #bytes == 1024 or #bytes == 256)) then
|
|
writeToTag(bytes)
|
|
end
|
|
end
|
|
|
|
-- call main with arguments
|
|
main(args)
|