proxmark3/include/usb_cmd.h
iceman1001 5eafdbf872 ADD: 'hf iclass check' - increased speed in check keys with new algo.
ADD: 'hf iclass' - trying to add the timeout-limits for commands in order to get a more stable iclass communication
2017-12-21 10:13:40 +01:00

294 lines
15 KiB
C

//-----------------------------------------------------------------------------
// Jonathan Westhues, Mar 2006
// Edits by Gerhard de Koning Gans, Sep 2007
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Definitions for all the types of commands that may be sent over USB; our
// own protocol.
//-----------------------------------------------------------------------------
#ifndef __USB_CMD_H
#define __USB_CMD_H
#ifdef _MSC_VER
typedef DWORD uint32_t;
typedef BYTE uint8_t;
#define PACKED
// stuff
#else
#include <stdint.h>
#include <stdbool.h>
#define PACKED __attribute__((packed))
#endif
#define USB_CMD_DATA_SIZE 512
typedef struct {
uint64_t cmd;
uint64_t arg[3];
union {
uint8_t asBytes[USB_CMD_DATA_SIZE];
uint32_t asDwords[USB_CMD_DATA_SIZE/4];
} d;
} PACKED UsbCommand;
// A struct used to send sample-configs over USB
typedef struct{
uint8_t decimation;
uint8_t bits_per_sample;
bool averaging;
int divisor;
int trigger_threshold;
} sample_config;
// For the bootloader
#define CMD_DEVICE_INFO 0x0000
#define CMD_SETUP_WRITE 0x0001
#define CMD_FINISH_WRITE 0x0003
#define CMD_HARDWARE_RESET 0x0004
#define CMD_START_FLASH 0x0005
#define CMD_NACK 0x00fe
#define CMD_ACK 0x00ff
// For general mucking around
#define CMD_DEBUG_PRINT_STRING 0x0100
#define CMD_DEBUG_PRINT_INTEGERS 0x0101
#define CMD_DEBUG_PRINT_BYTES 0x0102
#define CMD_LCD_RESET 0x0103
#define CMD_LCD 0x0104
#define CMD_BUFF_CLEAR 0x0105
#define CMD_READ_MEM 0x0106
#define CMD_VERSION 0x0107
#define CMD_STATUS 0x0108
#define CMD_PING 0x0109
#define CMD_DOWNLOAD_EML_BIGBUF 0x0110
#define CMD_DOWNLOADED_EML_BIGBUF 0x0111
// For low-frequency tags
#define CMD_READ_TI_TYPE 0x0202
#define CMD_WRITE_TI_TYPE 0x0203
#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
#define CMD_UPLOAD_SIM_SAMPLES_125K 0x0209
#define CMD_SIMULATE_TAG_125K 0x020A
#define CMD_HID_DEMOD_FSK 0x020B
#define CMD_HID_SIM_TAG 0x020C
#define CMD_SET_LF_DIVISOR 0x020D
#define CMD_LF_SIMULATE_BIDIR 0x020E
#define CMD_SET_ADC_MUX 0x020F
#define CMD_HID_CLONE_TAG 0x0210
#define CMD_EM410X_WRITE_TAG 0x0211
#define CMD_INDALA_CLONE_TAG 0x0212
// for 224 bits UID
#define CMD_INDALA_CLONE_TAG_L 0x0213
#define CMD_T55XX_READ_BLOCK 0x0214
#define CMD_T55XX_WRITE_BLOCK 0x0215
#define CMD_T55XX_RESET_READ 0x0216
#define CMD_PCF7931_READ 0x0217
#define CMD_PCF7931_WRITE 0x0223
#define CMD_EM4X_READ_WORD 0x0218
#define CMD_EM4X_WRITE_WORD 0x0219
#define CMD_IO_DEMOD_FSK 0x021A
#define CMD_IO_CLONE_TAG 0x021B
#define CMD_EM410X_DEMOD 0x021c
// Sampling configuration for LF reader/snooper
#define CMD_SET_LF_SAMPLING_CONFIG 0x021d
#define CMD_FSK_SIM_TAG 0x021E
#define CMD_ASK_SIM_TAG 0x021F
#define CMD_PSK_SIM_TAG 0x0220
#define CMD_AWID_DEMOD_FSK 0x0221
#define CMD_VIKING_CLONE_TAG 0x0222
#define CMD_T55XX_WAKEUP 0x0224
#define CMD_COTAG 0x0225
/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
// For the 13.56 MHz tags
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
#define CMD_READ_SRI_TAG 0x0303
#define CMD_ISO_14443B_COMMAND 0x0305
#define CMD_READER_ISO_15693 0x0310
#define CMD_SIMTAG_ISO_15693 0x0311
#define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
#define CMD_ISO_15693_COMMAND 0x0313
#define CMD_ISO_15693_COMMAND_DONE 0x0314
#define CMD_ISO_15693_FIND_AFI 0x0315
#define CMD_ISO_15693_DEBUG 0x0316
#define CMD_LF_SNOOP_RAW_ADC_SAMPLES 0x0317
// For Hitag2 transponders
#define CMD_SNOOP_HITAG 0x0370
#define CMD_SIMULATE_HITAG 0x0371
#define CMD_READER_HITAG 0x0372
// For HitagS
#define CMD_TEST_HITAGS_TRACES 0x0367
#define CMD_SIMULATE_HITAG_S 0x0368
#define CMD_READ_HITAG_S 0x0373
#define CMD_WR_HITAG_S 0x0375
#define CMD_EMU_HITAG_S 0x0376
#define CMD_SIMULATE_TAG_ISO_14443B 0x0381
#define CMD_SNOOP_ISO_14443B 0x0382
#define CMD_SNOOP_ISO_14443a 0x0383
#define CMD_SIMULATE_TAG_ISO_14443a 0x0384
#define CMD_READER_ISO_14443a 0x0385
#define CMD_RAW_WRITER_LEGIC_RF 0x0386
#define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
#define CMD_READER_LEGIC_RF 0x0388
#define CMD_WRITER_LEGIC_RF 0x0389
#define CMD_EPA_PACE_COLLECT_NONCE 0x038A
#define CMD_EPA_PACE_REPLAY 0x038B
#define CMD_LEGIC_INFO 0x03BC
#define CMD_LEGIC_ESET 0x03BD
#define CMD_LEGIC_EGET 0x03BE
#define CMD_ICLASS_READCHECK 0x038F
#define CMD_ICLASS_CLONE 0x0390
#define CMD_ICLASS_DUMP 0x0391
#define CMD_SNOOP_ICLASS 0x0392
#define CMD_SIMULATE_TAG_ICLASS 0x0393
#define CMD_READER_ICLASS 0x0394
#define CMD_READER_ICLASS_REPLAY 0x0395
#define CMD_ICLASS_READBLOCK 0x0396
#define CMD_ICLASS_WRITEBLOCK 0x0397
#define CMD_ICLASS_EML_MEMSET 0x0398
#define CMD_ICLASS_AUTHENTICATION 0x0399
#define CMD_ICLASS_CHECK_KEYS 0x039A
// For ISO1092 / FeliCa
#define CMD_FELICA_SIMULATE_TAG 0x03A0
#define CMD_FELICA_SNOOP 0x03A1
#define CMD_FELICA_COMMAND 0x03A2
//temp
#define CMD_FELICA_LITE_DUMP 0x03AA
#define CMD_FELICA_LITE_SIM 0x03AB
// For measurements of the antenna tuning
#define CMD_MEASURE_ANTENNA_TUNING 0x0400
#define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
#define CMD_MEASURED_ANTENNA_TUNING 0x0410
#define CMD_LISTEN_READER_FIELD 0x0420
// For direct FPGA control
#define CMD_FPGA_MAJOR_MODE_OFF 0x0500
// For mifare commands
#define CMD_MIFARE_SET_DBGMODE 0x0600
#define CMD_MIFARE_EML_MEMCLR 0x0601
#define CMD_MIFARE_EML_MEMSET 0x0602
#define CMD_MIFARE_EML_MEMGET 0x0603
#define CMD_MIFARE_EML_CARDLOAD 0x0604
// magic chinese card commands
#define CMD_MIFARE_CSETBLOCK 0x0605
#define CMD_MIFARE_CGETBLOCK 0x0606
#define CMD_MIFARE_CIDENT 0x0607
#define CMD_SIMULATE_MIFARE_CARD 0x0610
#define CMD_READER_MIFARE 0x0611
#define CMD_MIFARE_NESTED 0x0612
#define CMD_MIFARE_ACQUIRE_ENCRYPTED_NONCES 0x0613
#define CMD_MIFARE_ACQUIRE_NONCES 0x0614
#define CMD_MIFARE_READBL 0x0620
#define CMD_MIFAREU_READBL 0x0720
#define CMD_MIFARE_READSC 0x0621
#define CMD_MIFAREU_READCARD 0x0721
#define CMD_MIFARE_WRITEBL 0x0622
#define CMD_MIFAREU_WRITEBL 0x0722
#define CMD_MIFAREU_WRITEBL_COMPAT 0x0723
#define CMD_MIFARE_CHKKEYS 0x0623
#define CMD_MIFARE_SETMOD 0x0624
#define CMD_MIFARE_CHKKEYS_FAST 0x0625
#define CMD_MIFARE_SNIFFER 0x0630
//ultralightC
#define CMD_MIFAREUC_AUTH 0x0724
//0x0725 and 0x0726 no longer used
#define CMD_MIFAREUC_SETPWD 0x0727
// mifare desfire
#define CMD_MIFARE_DESFIRE_READBL 0x0728
#define CMD_MIFARE_DESFIRE_WRITEBL 0x0729
#define CMD_MIFARE_DESFIRE_AUTH1 0x072a
#define CMD_MIFARE_DESFIRE_AUTH2 0x072b
#define CMD_MIFARE_DES_READER 0x072c
#define CMD_MIFARE_DESFIRE_INFO 0x072d
#define CMD_MIFARE_DESFIRE 0x072e
#define CMD_MIFARE_COLLECT_NONCES 0x072f
#define CMD_MIFARE_NACK_DETECT 0x0730
#define CMD_HF_SNIFFER 0x0800
// For EMV Commands
#define CMD_EMV_READ_RECORD 0x0700
#define CMD_EMV_TRANSACTION 0x0701
#define CMD_EMV_CLONE 0x0702
#define CMD_EMV_SIM 0x0703
#define CMD_EMV_TEST 0x0704
#define CMD_EMV_FUZZ_RATS 0x0705
#define CMD_EMV_GET_RANDOM_NUM 0x0706
#define CMD_EMV_LOAD_VALUE 0x0707
#define CMD_EMV_DUMP_CARD 0x0708
#define CMD_UNKNOWN 0xFFFF
//Mifare simulation flags
#define FLAG_INTERACTIVE 0x01
#define FLAG_4B_UID_IN_DATA 0x02
#define FLAG_7B_UID_IN_DATA 0x04
#define FLAG_10B_UID_IN_DATA 0x08
#define FLAG_UID_IN_EMUL 0x10
#define FLAG_NR_AR_ATTACK 0x20
//#define FLAG_RANDOM_NONCE 0x40
//Iclass reader flags
#define FLAG_ICLASS_READER_ONLY_ONCE 0x01
#define FLAG_ICLASS_READER_CC 0x02
#define FLAG_ICLASS_READER_CSN 0x04
#define FLAG_ICLASS_READER_CONF 0x08
#define FLAG_ICLASS_READER_AA 0x10
#define FLAG_ICLASS_READER_ONE_TRY 0x20
#define FLAG_ICLASS_READER_CEDITKEY 0x40
// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
/* Whether a bootloader that understands the common_area is present */
#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
/* Whether a osimage that understands the common_area is present */
#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
/* Set if the bootloader is currently executing */
#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
/* Set if the OS is currently executing */
#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
/* Set if this device understands the extend start flash command */
#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
/* CMD_START_FLASH may have three arguments: start of area to flash,
end of area to flash, optional magic.
The bootrom will not allow to overwrite itself unless this magic
is given as third parameter */
#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
#endif