mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-11 10:14:34 +08:00
301 lines
9.2 KiB
C
301 lines
9.2 KiB
C
//-----------------------------------------------------------------------------
|
|
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
|
|
// at your option, any later version. See the LICENSE.txt file for the text of
|
|
// the license.
|
|
//-----------------------------------------------------------------------------
|
|
// main code for standalone HF Sniff (and ULC/NTAG/ULEV1 pwd storing)
|
|
//-----------------------------------------------------------------------------
|
|
|
|
/*
|
|
This can actually be used in two separate ways.
|
|
It can either be used to just HF 14a sniff on the go and/or grab the
|
|
authentication attempts for ULC/NTAG/ULEV1 into the flash mem (RDV4).
|
|
|
|
The retrieved sniffing session can be acquired by connecting the device
|
|
to a client that supports the reconnect capability and issue 'hf 14a list'.
|
|
|
|
In order to view the grabbed authentication attempts in the flash mem,
|
|
you can simply run 'script run read_pwd_mem' or just 'mem read l 256'
|
|
from the client to view the stored quadlets.
|
|
*/
|
|
|
|
#include "hf_bog.h"
|
|
|
|
#define DELAY_READER_AIR2ARM_AS_SNIFFER (2 + 3 + 8)
|
|
#define DELAY_TAG_AIR2ARM_AS_SNIFFER (3 + 14 + 8)
|
|
|
|
// Maximum number of auth attempts per standalone session
|
|
#define MAX_PWDS_PER_SESSION 64
|
|
|
|
uint8_t FindOffsetInFlash() {
|
|
uint8_t mem[4] = { 0x00, 0x00, 0x00, 0x00 };
|
|
uint8_t eom[4] = { 0xFF, 0xFF, 0xFF, 0xFF };
|
|
uint8_t memcnt = 0;
|
|
|
|
while (memcnt < 0xFF)
|
|
{
|
|
Flash_ReadData(memcnt, mem, 4);
|
|
if (memcmp(mem, eom, 4) == 0) {
|
|
return memcnt;
|
|
}
|
|
memcnt += 4;
|
|
}
|
|
|
|
return 0; // wrap-around
|
|
}
|
|
|
|
void EraseMemory() {
|
|
if (!FlashInit()){
|
|
return;
|
|
}
|
|
|
|
Flash_CheckBusy(BUSY_TIMEOUT);
|
|
Flash_WriteEnable();
|
|
Flash_Erase4k(0,0);
|
|
|
|
if (MF_DBGLEVEL > 1) Dbprintf("[!] Erased flash!");
|
|
FlashStop();
|
|
SpinDelay(100);
|
|
}
|
|
|
|
// This is actually copied from SniffIso14443a
|
|
void RAMFUNC SniffAndStore(uint8_t param) {
|
|
|
|
iso14443a_setup(FPGA_HF_ISO14443A_SNIFFER);
|
|
|
|
// Allocate memory from BigBuf for some buffers
|
|
// free all previous allocations first
|
|
BigBuf_free(); BigBuf_Clear_ext(false);
|
|
clear_trace();
|
|
set_tracing(true);
|
|
|
|
// Array to store the authpwds
|
|
uint8_t *capturedPwds = BigBuf_malloc(4 * MAX_PWDS_PER_SESSION);
|
|
|
|
// The command (reader -> tag) that we're receiving.
|
|
uint8_t *receivedCmd = BigBuf_malloc(MAX_FRAME_SIZE);
|
|
uint8_t *receivedCmdPar = BigBuf_malloc(MAX_PARITY_SIZE);
|
|
|
|
// The response (tag -> reader) that we're receiving.
|
|
uint8_t *receivedResp = BigBuf_malloc(MAX_FRAME_SIZE);
|
|
uint8_t *receivedRespPar = BigBuf_malloc(MAX_PARITY_SIZE);
|
|
|
|
// The DMA buffer, used to stream samples from the FPGA
|
|
uint8_t *dmaBuf = BigBuf_malloc(DMA_BUFFER_SIZE);
|
|
uint8_t *data = dmaBuf;
|
|
|
|
uint8_t previous_data = 0;
|
|
int dataLen = 0;
|
|
bool TagIsActive = false;
|
|
bool ReaderIsActive = false;
|
|
|
|
// Set up the demodulator for tag -> reader responses.
|
|
DemodInit(receivedResp, receivedRespPar);
|
|
|
|
// Set up the demodulator for the reader -> tag commands
|
|
UartInit(receivedCmd, receivedCmdPar);
|
|
|
|
// Setup and start DMA.
|
|
if ( !FpgaSetupSscDma((uint8_t*) dmaBuf, DMA_BUFFER_SIZE) ){
|
|
if (MF_DBGLEVEL > 1) Dbprintf("FpgaSetupSscDma failed. Exiting");
|
|
return;
|
|
}
|
|
|
|
tUart* uart = GetUart();
|
|
tDemod* demod = GetDemod();
|
|
|
|
// We won't start recording the frames that we acquire until we trigger;
|
|
// a good trigger condition to get started is probably when we see a
|
|
// response from the tag.
|
|
// triggered == false -- to wait first for card
|
|
bool triggered = !(param & 0x03);
|
|
|
|
uint32_t rsamples = 0;
|
|
|
|
// Current captured passwords counter
|
|
uint8_t auth_attempts = 0;
|
|
|
|
SpinDelay(50);
|
|
|
|
// loop and listen
|
|
while (!BUTTON_PRESS()) {
|
|
WDT_HIT();
|
|
LED_A_ON();
|
|
|
|
int register readBufDataP = data - dmaBuf;
|
|
int register dmaBufDataP = DMA_BUFFER_SIZE - AT91C_BASE_PDC_SSC->PDC_RCR;
|
|
if (readBufDataP <= dmaBufDataP)
|
|
dataLen = dmaBufDataP - readBufDataP;
|
|
else
|
|
dataLen = DMA_BUFFER_SIZE - readBufDataP + dmaBufDataP;
|
|
|
|
// test for length of buffer
|
|
if (dataLen > DMA_BUFFER_SIZE) { // TODO: Check if this works properly
|
|
Dbprintf("[!] blew circular buffer! | datalen %u", dataLen);
|
|
break;
|
|
}
|
|
if (dataLen < 1) continue;
|
|
|
|
// primary buffer was stopped( <-- we lost data!
|
|
if (!AT91C_BASE_PDC_SSC->PDC_RCR) {
|
|
AT91C_BASE_PDC_SSC->PDC_RPR = (uint32_t) dmaBuf;
|
|
AT91C_BASE_PDC_SSC->PDC_RCR = DMA_BUFFER_SIZE;
|
|
//Dbprintf("[-] RxEmpty ERROR | data length %d", dataLen); // temporary
|
|
}
|
|
// secondary buffer sets as primary, secondary buffer was stopped
|
|
if (!AT91C_BASE_PDC_SSC->PDC_RNCR) {
|
|
AT91C_BASE_PDC_SSC->PDC_RNPR = (uint32_t) dmaBuf;
|
|
AT91C_BASE_PDC_SSC->PDC_RNCR = DMA_BUFFER_SIZE;
|
|
}
|
|
|
|
LED_A_OFF();
|
|
|
|
// Need two samples to feed Miller and Manchester-Decoder
|
|
if (rsamples & 0x01) {
|
|
|
|
if (!TagIsActive) { // no need to try decoding reader data if the tag is sending
|
|
uint8_t readerdata = (previous_data & 0xF0) | (*data >> 4);
|
|
if (MillerDecoding(readerdata, (rsamples-1)*4)) {
|
|
LED_C_ON();
|
|
|
|
// check - if there is a short 7bit request from reader
|
|
if ((!triggered) && (param & 0x02) && (uart->len == 1) && (uart->bitCount == 7)) triggered = true;
|
|
|
|
if (triggered) {
|
|
if ((receivedCmd) && ((receivedCmd[0] == MIFARE_ULEV1_AUTH) || (receivedCmd[0] == MIFARE_ULC_AUTH_1))) {
|
|
if (MF_DBGLEVEL > 1) Dbprintf("PWD-AUTH KEY: 0x%02x%02x%02x%02x", receivedCmd[1], receivedCmd[2], receivedCmd[3], receivedCmd[4]);
|
|
|
|
// temporarily save the captured pwd in our array
|
|
memcpy(&capturedPwds[4 * auth_attempts], receivedCmd+1, 4);
|
|
auth_attempts++;
|
|
}
|
|
|
|
if (!LogTrace(receivedCmd,
|
|
uart->len,
|
|
uart->startTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER,
|
|
uart->endTime*16 - DELAY_READER_AIR2ARM_AS_SNIFFER,
|
|
uart->parity,
|
|
true)) break;
|
|
}
|
|
/* ready to receive another command. */
|
|
UartReset();
|
|
/* reset the demod code, which might have been */
|
|
/* false-triggered by the commands from the reader. */
|
|
DemodReset();
|
|
LED_B_OFF();
|
|
}
|
|
ReaderIsActive = (uart->state != STATE_UNSYNCD);
|
|
}
|
|
|
|
// no need to try decoding tag data if the reader is sending - and we cannot afford the time
|
|
if (!ReaderIsActive) {
|
|
uint8_t tagdata = (previous_data << 4) | (*data & 0x0F);
|
|
if (ManchesterDecoding(tagdata, 0, (rsamples-1)*4)) {
|
|
LED_B_ON();
|
|
|
|
if (!LogTrace(receivedResp,
|
|
demod->len,
|
|
demod->startTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER,
|
|
demod->endTime*16 - DELAY_TAG_AIR2ARM_AS_SNIFFER,
|
|
demod->parity,
|
|
false)) break;
|
|
|
|
if ((!triggered) && (param & 0x01)) triggered = true;
|
|
|
|
// ready to receive another response.
|
|
DemodReset();
|
|
// reset the Miller decoder including its (now outdated) input buffer
|
|
UartReset();
|
|
//UartInit(receivedCmd, receivedCmdPar);
|
|
LED_C_OFF();
|
|
}
|
|
TagIsActive = (demod->state != DEMOD_UNSYNCD);
|
|
}
|
|
}
|
|
|
|
previous_data = *data;
|
|
rsamples++;
|
|
data++;
|
|
if (data == dmaBuf + DMA_BUFFER_SIZE) {
|
|
data = dmaBuf;
|
|
}
|
|
} // end main loop
|
|
|
|
FpgaDisableSscDma();
|
|
set_tracing(false);
|
|
|
|
Dbprintf("Stopped sniffing");
|
|
|
|
SpinDelay(200);
|
|
|
|
// Write stuff to flash
|
|
if (auth_attempts > 0) {
|
|
if (MF_DBGLEVEL > 1) Dbprintf("[!] Authentication attempts = %u", auth_attempts);
|
|
|
|
// Setting the SPI Baudrate to 48MHz to avoid the bit-flip issue (https://github.com/RfidResearchGroup/proxmark3/issues/34)
|
|
FlashmemSetSpiBaudrate(48000000);
|
|
|
|
// Find the offset in flash mem to continue writing the auth attempts
|
|
uint8_t memoffset = FindOffsetInFlash();
|
|
if (MF_DBGLEVEL > 1) Dbprintf("[!] Memory offset = %u", memoffset);
|
|
|
|
if ((memoffset + 4 * auth_attempts) > 0xFF)
|
|
{
|
|
// We opt to keep the new data only
|
|
memoffset = 0;
|
|
if (MF_DBGLEVEL > 1) Dbprintf("[!] Size of total data > 256 bytes. Discarding the old data.");
|
|
}
|
|
|
|
// Get previous data from flash mem
|
|
uint8_t *previousdata = BigBuf_malloc(memoffset);
|
|
if (memoffset > 0)
|
|
{
|
|
uint16_t readlen = Flash_ReadData(0, previousdata, memoffset);
|
|
if (MF_DBGLEVEL > 1) Dbprintf("[!] Read %u bytes from flash mem", readlen);
|
|
}
|
|
|
|
// create new bigbuf to hold all data
|
|
size_t total_size = memoffset + 4 * auth_attempts;
|
|
uint8_t *total_data = BigBuf_malloc(total_size);
|
|
|
|
// Add the previousdata array into total_data array
|
|
memcpy(total_data, previousdata, memoffset);
|
|
|
|
// Copy bytes of capturedPwds immediately following bytes of previousdata
|
|
memcpy(total_data + memoffset, capturedPwds, 4 * auth_attempts);
|
|
|
|
// Erase first page of flash mem
|
|
EraseMemory();
|
|
|
|
// Write total data to flash mem
|
|
uint16_t writelen = Flash_WriteData(0, total_data, memoffset + 4 * auth_attempts);
|
|
if (MF_DBGLEVEL > 1) Dbprintf("[!] Wrote %u bytes into flash mem", writelen);
|
|
|
|
// If pwd saved successfully, blink led A three times
|
|
if (writelen > 0) {
|
|
SpinErr(0, 200, 5); // blink led A
|
|
}
|
|
|
|
SpinDelay(100);
|
|
|
|
// Reset the SPI Baudrate to the default value (24MHz)
|
|
FlashmemSetSpiBaudrate(24000000);
|
|
}
|
|
}
|
|
|
|
void RunMod() {
|
|
|
|
StandAloneMode();
|
|
|
|
Dbprintf(">> Bogiton 14a Sniff UL/UL-EV1/NTAG a.k.a BogitoRun Started <<");
|
|
Dbprintf("Starting to sniff");
|
|
|
|
// param:
|
|
// bit 0 - trigger from first card answer
|
|
// bit 1 - trigger from first reader 7-bit request
|
|
SniffAndStore(0);
|
|
LEDsoff();
|
|
SpinDelay(300);
|
|
Dbprintf("- [ End ] -> You can take shell back ...");
|
|
Dbprintf("- [ ! ] -> use 'script run read_pwd_mem' to print passwords");
|
|
}
|