mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-09-21 07:46:12 +08:00
d52e4e8819
FIX: simple namechange of some defines where it hinted it was related to "eml" when it wasn't.
382 lines
8.8 KiB
C
382 lines
8.8 KiB
C
#include "mifaredesfire.h"
|
||
|
||
#define MAX_APPLICATION_COUNT 28
|
||
#define MAX_FILE_COUNT 16
|
||
#define MAX_DESFIRE_FRAME_SIZE 60
|
||
#define NOT_YET_AUTHENTICATED 255
|
||
#define FRAME_PAYLOAD_SIZE (MAX_DESFIRE_FRAME_SIZE - 5)
|
||
#define RECEIVE_SIZE 64
|
||
|
||
// the block number for the ISO14443-4 PCB
|
||
uint8_t pcb_blocknum = 0;
|
||
// Deselect card by sending a s-block. the crc is precalced for speed
|
||
static uint8_t deselect_cmd[] = {0xc2,0xe0,0xb4};
|
||
|
||
//static uint8_t __msg[MAX_FRAME_SIZE] = { 0x0A, 0x00, 0x00, /* ..., */ 0x00 };
|
||
/* PCB CID CMD PAYLOAD */
|
||
//static uint8_t __res[MAX_FRAME_SIZE];
|
||
|
||
bool InitDesfireCard(){
|
||
|
||
// Make sure it is off.
|
||
// FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
|
||
// SpinDelay(300);
|
||
|
||
byte_t cardbuf[USB_CMD_DATA_SIZE];
|
||
memset(cardbuf,0,sizeof(cardbuf));
|
||
iso14a_card_select_t *card = (iso14a_card_select_t*)cardbuf;
|
||
|
||
iso14a_set_tracing(TRUE);
|
||
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
|
||
|
||
int len = iso14443a_select_card(NULL,card,NULL);
|
||
|
||
if (!len) {
|
||
if (MF_DBGLEVEL >= 1) Dbprintf("Can't select card");
|
||
OnError();
|
||
return false;
|
||
}
|
||
return true;
|
||
}
|
||
|
||
// ARG0 flag enums
|
||
enum {
|
||
NONE = 0x00,
|
||
INIT = 0x01,
|
||
DISCONNECT = 0x02,
|
||
CLEARTRACE = 0x04,
|
||
BAR = 0x08,
|
||
} CmdOptions ;
|
||
|
||
void MifareSendCommand(uint8_t arg0, uint8_t arg1, uint8_t *datain){
|
||
|
||
/* ARG0 contains flags.
|
||
0x01 = init card.
|
||
0x02 = Disconnect
|
||
0x03
|
||
*/
|
||
uint8_t flags = arg0;
|
||
size_t datalen = arg1;
|
||
uint8_t resp[RECEIVE_SIZE];
|
||
memset(resp,0,sizeof(resp));
|
||
|
||
if (MF_DBGLEVEL >= 4) {
|
||
Dbprintf(" flags : %02X", flags);
|
||
Dbprintf(" len : %02X", datalen);
|
||
print_result(" RX : ", datain, datalen);
|
||
}
|
||
|
||
if ( flags & CLEARTRACE ){
|
||
iso14a_clear_trace();
|
||
}
|
||
|
||
if ( flags & INIT ){
|
||
if ( !InitDesfireCard() )
|
||
return;
|
||
}
|
||
|
||
int len = DesfireAPDU(datain, datalen, resp);
|
||
if (MF_DBGLEVEL >= 4) {
|
||
print_result("ERR <--: ", resp, len);
|
||
}
|
||
|
||
if ( !len ) {
|
||
OnError();
|
||
return;
|
||
}
|
||
|
||
// reset the pcb_blocknum,
|
||
pcb_blocknum = 0;
|
||
|
||
if ( flags & DISCONNECT ){
|
||
OnSuccess();
|
||
}
|
||
|
||
cmd_send(CMD_ACK,1,len,0,resp,len);
|
||
}
|
||
|
||
void MifareDesfireGetInformation(){
|
||
|
||
int len = 0;
|
||
uint8_t resp[USB_CMD_DATA_SIZE];
|
||
uint8_t dataout[USB_CMD_DATA_SIZE];
|
||
byte_t cardbuf[USB_CMD_DATA_SIZE];
|
||
|
||
memset(resp,0,sizeof(resp));
|
||
memset(dataout,0, sizeof(dataout));
|
||
memset(cardbuf,0,sizeof(cardbuf));
|
||
|
||
/*
|
||
1 = PCB 1
|
||
2 = cid 2
|
||
3 = desfire command 3
|
||
4-5 = crc 4 key
|
||
5-6 crc
|
||
PCB == 0x0A because sending CID byte.
|
||
CID == 0x00 first card?
|
||
*/
|
||
iso14a_clear_trace();
|
||
iso14a_set_tracing(TRUE);
|
||
iso14443a_setup(FPGA_HF_ISO14443A_READER_LISTEN);
|
||
|
||
// card select - information
|
||
iso14a_card_select_t *card = (iso14a_card_select_t*)cardbuf;
|
||
byte_t isOK = iso14443a_select_card(NULL, card, NULL);
|
||
if ( isOK == 0) {
|
||
if (MF_DBGLEVEL >= 1) {
|
||
Dbprintf("Can't select card");
|
||
}
|
||
OnError();
|
||
return;
|
||
}
|
||
|
||
memcpy(dataout,card->uid,7);
|
||
|
||
LED_A_ON();
|
||
LED_B_OFF();
|
||
LED_C_OFF();
|
||
|
||
uint8_t cmd[] = {GET_VERSION};
|
||
size_t cmd_len = sizeof(cmd);
|
||
|
||
len = DesfireAPDU(cmd, cmd_len, resp);
|
||
if ( !len ) {
|
||
print_result("ERROR <--: ", resp, len);
|
||
OnError();
|
||
return;
|
||
}
|
||
|
||
LED_A_OFF();
|
||
LED_B_ON();
|
||
memcpy(dataout+7,resp+3,7);
|
||
|
||
// ADDITION_FRAME 1
|
||
cmd[0] = ADDITIONAL_FRAME;
|
||
len = DesfireAPDU(cmd, cmd_len, resp);
|
||
if ( !len ) {
|
||
print_result("ERROR <--: ", resp, len);
|
||
OnError();
|
||
return;
|
||
}
|
||
|
||
LED_B_OFF();
|
||
LED_C_ON();
|
||
memcpy(dataout+7+7,resp+3,7);
|
||
|
||
// ADDITION_FRAME 2
|
||
len = DesfireAPDU(cmd, cmd_len, resp);
|
||
if ( !len ) {
|
||
print_result("ERROR <--: ", resp, len);
|
||
OnError();
|
||
return;
|
||
}
|
||
|
||
memcpy(dataout+7+7+7,resp+3,14);
|
||
|
||
cmd_send(CMD_ACK,1,0,0,dataout,sizeof(dataout));
|
||
|
||
// reset the pcb_blocknum,
|
||
pcb_blocknum = 0;
|
||
OnSuccess();
|
||
}
|
||
|
||
void MifareDES_Auth1(uint8_t mode, uint8_t algo, uint8_t keyno, uint8_t *datain){
|
||
|
||
int len = 0;
|
||
//uint8_t PICC_MASTER_KEY8[8] = { 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47};
|
||
uint8_t PICC_MASTER_KEY16[16] = { 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f };
|
||
//uint8_t null_key_data8[8] = {0x00};
|
||
//uint8_t null_key_data16[16] = {0x00};
|
||
//uint8_t new_key_data8[8] = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77};
|
||
//uint8_t new_key_data16[16] = { 0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF};
|
||
|
||
//uint8_t* bigbuffer = get_bigbufptr_recvrespbuf();
|
||
uint8_t resp[256] = {0x00};
|
||
uint8_t IV[16] = {0x00};
|
||
|
||
size_t datalen = datain[0];
|
||
|
||
uint8_t cmd[40] = {0x00};
|
||
uint8_t encRndB[16] = {0x00};
|
||
uint8_t decRndB[16] = {0x00};
|
||
uint8_t nonce[16] = {0x00};
|
||
uint8_t both[32] = {0x00};
|
||
uint8_t encBoth[32] = {0x00};
|
||
|
||
InitDesfireCard();
|
||
|
||
LED_A_ON();
|
||
LED_B_OFF();
|
||
LED_C_OFF();
|
||
|
||
// 3 olika s<>tt att authenticera. AUTH (CRC16) , AUTH_ISO (CRC32) , AUTH_AES (CRC32)
|
||
// 4 olika crypto algo DES, 3DES, 3K3DES, AES
|
||
// 3 olika kommunikations s<>tt, PLAIN,MAC,CRYPTO
|
||
|
||
// des, nyckel 0,
|
||
switch (mode){
|
||
case 1:
|
||
// if ( SendDesfireCommand(AUTHENTICATE, &keyno, resp) > 0 ){
|
||
// // fick nonce fr<66>n kortet
|
||
// }
|
||
break;
|
||
case 2:
|
||
//SendDesfireCommand(AUTHENTICATE_ISO, &keyno, resp);
|
||
break;
|
||
case 3:{
|
||
|
||
//defaultkey
|
||
uint8_t keybytes[16];
|
||
if (datain[1] == 0xff){
|
||
memcpy(keybytes,PICC_MASTER_KEY16,16);
|
||
} else{
|
||
memcpy(keybytes, datain+1, datalen);
|
||
}
|
||
|
||
struct desfire_key defaultkey = {0};
|
||
desfirekey_t key = &defaultkey;
|
||
Desfire_aes_key_new( keybytes, key);
|
||
|
||
AesCtx ctx;
|
||
if ( AesCtxIni(&ctx, IV, key->data, KEY128, CBC) < 0 ){
|
||
if( MF_DBGLEVEL >= 4) {
|
||
Dbprintf("AES context failed to init");
|
||
}
|
||
OnError();
|
||
return;
|
||
}
|
||
|
||
cmd[0] = AUTHENTICATE_AES;
|
||
cmd[1] = 0x00; //keynumber
|
||
len = DesfireAPDU(cmd, 2, resp);
|
||
if ( !len ) {
|
||
if (MF_DBGLEVEL >= 1) {
|
||
DbpString("Authentication failed. Card timeout.");
|
||
}
|
||
OnError();
|
||
return;
|
||
}
|
||
|
||
memcpy( encRndB, resp+3, 16);
|
||
|
||
// dekryptera tagnonce.
|
||
AesDecrypt(&ctx, encRndB, decRndB, 16);
|
||
rol(decRndB,16);
|
||
memcpy(both, nonce,16);
|
||
memcpy(both+16, decRndB ,16 );
|
||
AesEncrypt(&ctx, both, encBoth, 32 );
|
||
|
||
cmd[0] = ADDITIONAL_FRAME;
|
||
memcpy(cmd+1, encBoth, 32 );
|
||
|
||
len = DesfireAPDU(cmd, 33, resp); // 1 + 32 == 33
|
||
if ( !len ) {
|
||
if (MF_DBGLEVEL >= 1) {
|
||
DbpString("Authentication failed. Card timeout.");
|
||
}
|
||
OnError();
|
||
return;
|
||
}
|
||
|
||
if ( resp[2] == 0x00 ){
|
||
// Create AES Session key
|
||
struct desfire_key sessionKey = {0};
|
||
desfirekey_t skey = &sessionKey;
|
||
Desfire_session_key_new( nonce, decRndB , key, skey );
|
||
print_result("SESSION : ", skey->data, 16);
|
||
} else {
|
||
DbpString("Authetication failed.");
|
||
OnError();
|
||
return;
|
||
}
|
||
|
||
break;
|
||
}
|
||
}
|
||
|
||
OnSuccess();
|
||
cmd_send(CMD_ACK,1,len,0,resp,len);
|
||
}
|
||
|
||
// 3 olika ISO s<>tt att skicka data till DESFIRE (direkt, inkapslat, inkapslat ISO)
|
||
// cmd = cmd bytes to send
|
||
// cmd_len = length of cmd
|
||
// dataout = pointer to response data array
|
||
int DesfireAPDU(uint8_t *cmd, size_t cmd_len, uint8_t *dataout){
|
||
|
||
size_t len = 0;
|
||
size_t wrappedLen = 0;
|
||
uint8_t wCmd[USB_CMD_DATA_SIZE] = {0};
|
||
|
||
uint8_t *resp = ((uint8_t *)BigBuf) + RECV_RESP_OFFSET;
|
||
uint8_t *resp_par = ((uint8_t *)BigBuf) + RECV_RESP_PAR_OFFSET;
|
||
|
||
wrappedLen = CreateAPDU( cmd, cmd_len, wCmd);
|
||
|
||
if (MF_DBGLEVEL >= 4) {
|
||
print_result("WCMD <--: ", wCmd, wrappedLen);
|
||
}
|
||
ReaderTransmit( wCmd, wrappedLen, NULL);
|
||
|
||
len = ReaderReceive(resp, resp_par);
|
||
|
||
if( len == 0x00 ){
|
||
if (MF_DBGLEVEL >= 4) {
|
||
Dbprintf("fukked");
|
||
}
|
||
return FALSE; //DATA LINK ERROR
|
||
}
|
||
// if we received an I- or R(ACK)-Block with a block number equal to the
|
||
// current block number, toggle the current block number
|
||
else if (len >= 4 // PCB+CID+CRC = 4 bytes
|
||
&& ((resp[0] & 0xC0) == 0 // I-Block
|
||
|| (resp[0] & 0xD0) == 0x80) // R-Block with ACK bit set to 0
|
||
&& (resp[0] & 0x01) == pcb_blocknum) // equal block numbers
|
||
{
|
||
pcb_blocknum ^= 1; //toggle next block
|
||
}
|
||
|
||
memcpy(dataout, resp, len);
|
||
return len;
|
||
}
|
||
|
||
// CreateAPDU
|
||
size_t CreateAPDU( uint8_t *datain, size_t len, uint8_t *dataout){
|
||
|
||
size_t cmdlen = MIN(len+4, USB_CMD_DATA_SIZE-1);
|
||
|
||
uint8_t cmd[cmdlen];
|
||
memset(cmd, 0, cmdlen);
|
||
|
||
cmd[0] = 0x0A; // 0x0A = skicka cid, 0x02 = ingen cid. S<>rskilda bitar //
|
||
cmd[0] |= pcb_blocknum; // OR the block number into the PCB
|
||
cmd[1] = 0x00; // CID: 0x00 //TODO: allow multiple selected cards
|
||
|
||
memcpy(cmd+2, datain, len);
|
||
AppendCrc14443a(cmd, len+2);
|
||
|
||
memcpy(dataout, cmd, cmdlen);
|
||
|
||
return cmdlen;
|
||
}
|
||
|
||
// crc_update(&desfire_crc32, 0, 1); /* CMD_WRITE */
|
||
// crc_update(&desfire_crc32, addr, addr_sz);
|
||
// crc_update(&desfire_crc32, byte, 8);
|
||
// uint32_t crc = crc_finish(&desfire_crc32);
|
||
|
||
void OnSuccess(){
|
||
pcb_blocknum = 0;
|
||
ReaderTransmit(deselect_cmd, 3 , NULL);
|
||
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
|
||
LEDsoff();
|
||
}
|
||
|
||
void OnError(){
|
||
pcb_blocknum = 0;
|
||
ReaderTransmit(deselect_cmd, 3 , NULL);
|
||
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
|
||
cmd_send(CMD_ACK,0,0,0,0,0);
|
||
LEDsoff();
|
||
}
|