mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-12 12:41:49 +08:00
2000 lines
70 KiB
C
2000 lines
70 KiB
C
//-----------------------------------------------------------------------------
|
|
// Copyright (C) 2010 iZsh <izsh at fail0verflow.com>
|
|
// Modified 2010-2012 by <adrian -at- atrox.at>
|
|
// Modified 2012 by <vsza at vsza.hu>
|
|
// Modfified 2018 by <iceman>
|
|
//
|
|
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
|
|
// at your option, any later version. See the LICENSE.txt file for the text of
|
|
// the license.
|
|
//-----------------------------------------------------------------------------
|
|
// High frequency ISO15693 commands
|
|
//-----------------------------------------------------------------------------
|
|
// There are three basic operation modes, depending on which device (proxmark/pc)
|
|
// the signal processing, (de)modulation, transmission protocol and logic is done.
|
|
// Mode 1:
|
|
// All steps are done on the proxmark, the output of the commands is returned via
|
|
// USB-debug-print commands.
|
|
// Mode 2:
|
|
// The protocol is done on the PC, passing only Iso15693 data frames via USB. This
|
|
// allows direct communication with a tag on command level
|
|
// Mode 3:
|
|
// The proxmark just samples the antenna and passes this "analog" data via USB to
|
|
// the client. Signal Processing & decoding is done on the pc. This is the slowest
|
|
// variant, but offers the possibility to analyze the waveforms directly.
|
|
#include "cmdhf15.h"
|
|
#include <ctype.h>
|
|
#include "cmdparser.h" // command_t
|
|
#include "commonutil.h" // ARRAYLEN
|
|
#include "comms.h" // clearCommandBuffer
|
|
#include "cmdtrace.h"
|
|
#include "iso15693tools.h"
|
|
#include "crypto/libpcrypto.h"
|
|
#include "graph.h"
|
|
#include "crc16.h" // iso15 crc
|
|
#include "cmddata.h" // getsamples
|
|
#include "fileutils.h" // savefileEML
|
|
#include "cliparser.h"
|
|
|
|
#define FrameSOF Iso15693FrameSOF
|
|
#define Logic0 Iso15693Logic0
|
|
#define Logic1 Iso15693Logic1
|
|
#define FrameEOF Iso15693FrameEOF
|
|
|
|
#ifndef Crc15
|
|
# define Crc15(data, len) Crc16ex(CRC_15693, (data), (len))
|
|
#endif
|
|
#ifndef CheckCrc15
|
|
# define CheckCrc15(data, len) check_crc(CRC_15693, (data), (len))
|
|
#endif
|
|
#ifndef AddCrc15
|
|
#define AddCrc15(data, len) compute_crc(CRC_15693, (data), (len), (data)+(len), (data)+(len)+1)
|
|
#endif
|
|
|
|
typedef struct {
|
|
uint8_t lock;
|
|
uint8_t block[4];
|
|
} t15memory_t;
|
|
|
|
// structure and database for uid -> tagtype lookups
|
|
typedef struct {
|
|
uint64_t uid;
|
|
int mask; // how many MSB bits used
|
|
const char *desc;
|
|
} productName_t;
|
|
|
|
const productName_t uidmapping[] = {
|
|
|
|
// UID, #significant Bits, "Vendor(+Product)"
|
|
{ 0xE001000000000000LL, 16, "Motorola UK" },
|
|
|
|
// E0 02 xx
|
|
// 02 = ST Microelectronics
|
|
// XX = IC id (Chip ID Family)
|
|
{ 0xE002000000000000LL, 16, "ST Microelectronics SA France" },
|
|
{ 0xE002050000000000LL, 24, "ST Microelectronics; LRI64 [IC id = 05]"},
|
|
{ 0xE002080000000000LL, 24, "ST Microelectronics; LRI2K [IC id = 08]"},
|
|
{ 0xE0020A0000000000LL, 24, "ST Microelectronics; LRIS2K [IC id = 10]"},
|
|
{ 0xE002440000000000LL, 24, "ST Microelectronics; LRIS64K [IC id = 68]"},
|
|
|
|
{ 0xE003000000000000LL, 16, "Hitachi, Ltd Japan" },
|
|
|
|
// E0 04 xx
|
|
// 04 = Manufacturer code (Philips/NXP)
|
|
// XX = IC id (Chip ID Family)
|
|
//I-Code SLI SL2 ICS20 [IC id = 01]
|
|
//I-Code SLI-S [IC id = 02]
|
|
//I-Code SLI-L [IC id = 03]
|
|
//I-Code SLIX [IC id = 01 + bit36 set to 1 (starting from bit0 - different from normal SLI)]
|
|
//I-Code SLIX2 [IC id = 01 + bit35 set to 1 + bit36 set to 0]
|
|
//I-Code SLIX-S [IC id = 02 + bit36 set to 1]
|
|
//I-Code SLIX-L [IC id = 03 + bit36 set to 1]
|
|
{ 0xE004000000000000LL, 16, "NXP Semiconductors Germany (Philips)" },
|
|
{ 0xE004010000000000LL, 24, "NXP(Philips); IC SL2 ICS20/ICS21(SLI) ICS2002/ICS2102(SLIX) ICS2602(SLIX2)" },
|
|
{ 0xE004020000000000LL, 24, "NXP(Philips); IC SL2 ICS53/ICS54(SLI-S) ICS5302/ICS5402(SLIX-S)" },
|
|
{ 0xE004030000000000LL, 24, "NXP(Philips); IC SL2 ICS50/ICS51(SLI-L) ICS5002/ICS5102(SLIX-L)" },
|
|
|
|
// E0 05 XX .. .. ..
|
|
// 05 = Manufacturer code (Infineon)
|
|
// XX = IC id (Chip ID Family)
|
|
{ 0xE005000000000000LL, 16, "Infineon Technologies AG Germany" },
|
|
{ 0xE005A10000000000LL, 24, "Infineon; SRF55V01P [IC id = 161] plain mode 1kBit"},
|
|
{ 0xE005A80000000000LL, 24, "Infineon; SRF55V01P [IC id = 168] pilot series 1kBit"},
|
|
{ 0xE005400000000000LL, 24, "Infineon; SRF55V02P [IC id = 64] plain mode 2kBit"},
|
|
{ 0xE005000000000000LL, 24, "Infineon; SRF55V10P [IC id = 00] plain mode 10KBit"},
|
|
{ 0xE005500000000000LL, 24, "Infineon; SRF55V02S [IC id = 80] secure mode 2kBit"},
|
|
{ 0xE005100000000000LL, 24, "Infineon; SRF55V10S [IC id = 16] secure mode 10KBit"},
|
|
{ 0xE0051E0000000000LL, 23, "Infineon; SLE66r01P [IC id = 3x = My-d Move or My-d move NFC]"},
|
|
{ 0xE005200000000000LL, 21, "Infineon; SLE66r01P [IC id = 3x = My-d Move or My-d move NFC]"},
|
|
|
|
{ 0xE006000000000000LL, 16, "Cylink USA" },
|
|
|
|
|
|
// E0 07 xx
|
|
// 07 = Texas Instruments
|
|
// XX = from bit 41 to bit 43 = product configuration - from bit 44 to bit 47 IC id (Chip ID Family)
|
|
//Tag IT RFIDType-I Plus, 2kBit, TI Inlay
|
|
//Tag-it HF-I Plus Inlay [IC id = 00] -> b'0000 000 2kBit
|
|
//Tag-it HF-I Plus Chip [IC id = 64] -> b'1000 000 2kBit
|
|
//Tag-it HF-I Standard Chip / Inlays [IC id = 96] -> b'1100 000 256Bit
|
|
//Tag-it HF-I Pro Chip / Inlays [IC id = 98] -> b'1100 010 256Bit, Password protection
|
|
{ 0xE007000000000000LL, 16, "Texas Instrument France" },
|
|
{ 0xE007000000000000LL, 20, "Texas Instrument; Tag-it HF-I Plus Inlay; 64x32bit" },
|
|
{ 0xE007100000000000LL, 20, "Texas Instrument; Tag-it HF-I Plus Chip; 64x32bit" },
|
|
{ 0xE007800000000000LL, 23, "Texas Instrument; Tag-it HF-I Plus (RF-HDT-DVBB tag or Third Party Products)" },
|
|
{ 0xE007C00000000000LL, 23, "Texas Instrument; Tag-it HF-I Standard; 8x32bit" },
|
|
{ 0xE007C40000000000LL, 23, "Texas Instrument; Tag-it HF-I Pro; 8x23bit; password" },
|
|
|
|
{ 0xE008000000000000LL, 16, "Fujitsu Limited Japan" },
|
|
{ 0xE009000000000000LL, 16, "Matsushita Electronics Corporation, Semiconductor Company Japan" },
|
|
{ 0xE00A000000000000LL, 16, "NEC Japan" },
|
|
{ 0xE00B000000000000LL, 16, "Oki Electric Industry Co. Ltd Japan" },
|
|
{ 0xE00C000000000000LL, 16, "Toshiba Corp. Japan" },
|
|
{ 0xE00D000000000000LL, 16, "Mitsubishi Electric Corp. Japan" },
|
|
{ 0xE00E000000000000LL, 16, "Samsung Electronics Co. Ltd Korea" },
|
|
{ 0xE00F000000000000LL, 16, "Hynix / Hyundai, Korea" },
|
|
{ 0xE010000000000000LL, 16, "LG-Semiconductors Co. Ltd Korea" },
|
|
{ 0xE011000000000000LL, 16, "Emosyn-EM Microelectronics USA" },
|
|
|
|
{ 0xE012000000000000LL, 16, "HID Corporation" },
|
|
{ 0xE012000000000000LL, 16, "INSIDE Technology France" },
|
|
{ 0xE013000000000000LL, 16, "ORGA Kartensysteme GmbH Germany" },
|
|
{ 0xE014000000000000LL, 16, "SHARP Corporation Japan" },
|
|
{ 0xE015000000000000LL, 16, "ATMEL France" },
|
|
|
|
{ 0xE016000000000000LL, 16, "EM Microelectronic-Marin SA Switzerland (Skidata)"},
|
|
{ 0xE016040000000000LL, 24, "EM-Marin SA (Skidata Keycard-eco); EM4034 [IC id = 01] (Read/Write - no AFI)"},
|
|
{ 0xE0160C0000000000LL, 24, "EM-Marin SA (Skidata); EM4035 [IC id = 03] (Read/Write - replaced by 4233)"},
|
|
{ 0xE016100000000000LL, 24, "EM-Marin SA (Skidata); EM4135 [IC id = 04] (Read/Write - replaced by 4233) 36x64bit start page 13"},
|
|
{ 0xE016140000000000LL, 24, "EM-Marin SA (Skidata); EM4036 [IC id = 05] 28pF"},
|
|
{ 0xE016180000000000LL, 24, "EM-Marin SA (Skidata); EM4006 [IC id = 06] (Read Only)"},
|
|
{ 0xE0161C0000000000LL, 24, "EM-Marin SA (Skidata); EM4133 [IC id = 07] 23,5pF (Read/Write)"},
|
|
{ 0xE016200000000000LL, 24, "EM-Marin SA (Skidata); EM4033 [IC id = 08] 23,5pF (Read Only - no AFI / no DSFID / no security blocks)"},
|
|
{ 0xE016240000000000LL, 24, "EM-Marin SA (Skidata); EM4233 [IC id = 09] 23,5pF CustomerID-102"},
|
|
{ 0xE016280000000000LL, 24, "EM-Marin SA (Skidata); EM4233 SLIC [IC id = 10] 23,5pF (1Kb flash memory - not provide High Security mode and QuietStorage feature)" },
|
|
{ 0xE0163C0000000000LL, 24, "EM-Marin SA (Skidata); EM4237 [IC id = 15] 23,5pF"},
|
|
{ 0xE0167C0000000000LL, 24, "EM-Marin SA (Skidata); EM4233 [IC id = 31] 95pF"},
|
|
{ 0xE016940000000000LL, 24, "EM-Marin SA (Skidata); EM4036 [IC id = 37] 95pF 51x64bit "},
|
|
{ 0xE0169c0000000000LL, 24, "EM-Marin SA (Skidata); EM4133 [IC id = 39] 95pF (Read/Write)" },
|
|
{ 0xE016A80000000000LL, 24, "EM-Marin SA (Skidata); EM4233 SLIC [IC id = 42] 97pF" },
|
|
{ 0xE016BC0000000000LL, 24, "EM-Marin SA (Skidata); EM4237 [IC id = 47] 97pF" },
|
|
|
|
{ 0xE017000000000000LL, 16, "KSW Microtec GmbH Germany" },
|
|
{ 0xE018000000000000LL, 16, "ZMD AG Germany" },
|
|
{ 0xE019000000000000LL, 16, "XICOR, Inc. USA" },
|
|
{ 0xE01A000000000000LL, 16, "Sony Corporation Japan Identifier Company Country" },
|
|
{ 0xE01B000000000000LL, 16, "Malaysia Microelectronic Solutions Sdn. Bhd Malaysia" },
|
|
{ 0xE01C000000000000LL, 16, "Emosyn USA" },
|
|
{ 0xE01D000000000000LL, 16, "Shanghai Fudan Microelectronics Co. Ltd. P.R. China" },
|
|
{ 0xE01E000000000000LL, 16, "Magellan Technology Pty Limited Australia" },
|
|
{ 0xE01F000000000000LL, 16, "Melexis NV BO Switzerland" },
|
|
{ 0xE020000000000000LL, 16, "Renesas Technology Corp. Japan" },
|
|
{ 0xE021000000000000LL, 16, "TAGSYS France" },
|
|
{ 0xE022000000000000LL, 16, "Transcore USA" },
|
|
{ 0xE023000000000000LL, 16, "Shanghai belling corp., ltd. China" },
|
|
{ 0xE024000000000000LL, 16, "Masktech Germany Gmbh Germany" },
|
|
{ 0xE025000000000000LL, 16, "Innovision Research and Technology Plc UK" },
|
|
{ 0xE026000000000000LL, 16, "Hitachi ULSI Systems Co., Ltd. Japan" },
|
|
{ 0xE027000000000000LL, 16, "Cypak AB Sweden" },
|
|
{ 0xE028000000000000LL, 16, "Ricoh Japan" },
|
|
{ 0xE029000000000000LL, 16, "ASK France" },
|
|
{ 0xE02A000000000000LL, 16, "Unicore Microsystems, LLC Russian Federation" },
|
|
{ 0xE02B000000000000LL, 16, "Dallas Semiconductor/Maxim USA" },
|
|
{ 0xE02C000000000000LL, 16, "Impinj, Inc. USA" },
|
|
{ 0xE02D000000000000LL, 16, "RightPlug Alliance USA" },
|
|
{ 0xE02E000000000000LL, 16, "Broadcom Corporation USA" },
|
|
{ 0xE02F000000000000LL, 16, "MStar Semiconductor, Inc Taiwan, ROC" },
|
|
{ 0xE030000000000000LL, 16, "BeeDar Technology Inc. USA" },
|
|
{ 0xE031000000000000LL, 16, "RFIDsec Denmark" },
|
|
{ 0xE032000000000000LL, 16, "Schweizer Electronic AG Germany" },
|
|
{ 0xE033000000000000LL, 16, "AMIC Technology Corp Taiwan" },
|
|
{ 0xE034000000000000LL, 16, "Mikron JSC Russia" },
|
|
{ 0xE035000000000000LL, 16, "Fraunhofer Institute for Photonic Microsystems Germany" },
|
|
{ 0xE036000000000000LL, 16, "IDS Microchip AG Switzerland" },
|
|
{ 0xE037000000000000LL, 16, "Kovio USA" },
|
|
{ 0xE038000000000000LL, 16, "HMT Microelectronic Ltd Switzerland Identifier Company Country" },
|
|
{ 0xE039000000000000LL, 16, "Silicon Craft Technology Thailand" },
|
|
{ 0xE03A000000000000LL, 16, "Advanced Film Device Inc. Japan" },
|
|
{ 0xE03B000000000000LL, 16, "Nitecrest Ltd UK" },
|
|
{ 0xE03C000000000000LL, 16, "Verayo Inc. USA" },
|
|
{ 0xE03D000000000000LL, 16, "HID Global USA" },
|
|
{ 0xE03E000000000000LL, 16, "Productivity Engineering Gmbh Germany" },
|
|
{ 0xE03F000000000000LL, 16, "Austriamicrosystems AG (reserved) Austria" },
|
|
{ 0xE040000000000000LL, 16, "Gemalto SA France" },
|
|
{ 0xE041000000000000LL, 16, "Renesas Electronics Corporation Japan" },
|
|
{ 0xE042000000000000LL, 16, "3Alogics Inc Korea" },
|
|
{ 0xE043000000000000LL, 16, "Top TroniQ Asia Limited Hong Kong" },
|
|
{ 0xE044000000000000LL, 16, "Gentag Inc (USA) USA" },
|
|
{ 0, 0, "no tag-info available" } // must be the last entry
|
|
};
|
|
|
|
static int CmdHF15Help(const char *Cmd);
|
|
|
|
static int usage_15_info(void) {
|
|
PrintAndLogEx(NORMAL, "Uses the optional command 'get_systeminfo' 0x2B to try and extract information\n"
|
|
"command may fail, depending on tag.\n"
|
|
"defaults to '1 out of 4' mode\n"
|
|
"\n"
|
|
"Usage: hf 15 info [options] <uid|s|u|*>\n"
|
|
"Options:\n"
|
|
"\t-2 use slower '1 out of 256' mode\n"
|
|
"\tuid (either): \n"
|
|
"\t <8B hex> full UID eg E011223344556677\n"
|
|
"\t u unaddressed mode\n"
|
|
"\t * scan for tag\n"
|
|
"Examples:\n"
|
|
_YELLOW_("\thf 15 info u"));
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
static int usage_15_writeafi(void) {
|
|
PrintAndLogEx(NORMAL, "Usage: hf 15 writeafi <uid|u|*> <afi>\n"
|
|
"\tuid (either): \n"
|
|
"\t <8B hex> full UID eg E011223344556677\n"
|
|
"\t u unaddressed mode\n"
|
|
"\t * scan for tag\n"
|
|
"\t <afi> AFI number 0-255");
|
|
return PM3_SUCCESS;
|
|
}
|
|
static int usage_15_writedsfid(void) {
|
|
PrintAndLogEx(NORMAL, "Usage: hf 15 writedsfid <uid|u|*> <dsfid>\n"
|
|
"\tuid (either): \n"
|
|
"\t <8B hex> full UID eg E011223344556677\n"
|
|
"\t u unaddressed mode\n"
|
|
"\t * scan for tag\n"
|
|
"\t <dsfid> DSFID number 0-255");
|
|
return PM3_SUCCESS;
|
|
}
|
|
static int usage_15_dump(void) {
|
|
PrintAndLogEx(NORMAL, "This command dumps the contents of a ISO-15693 tag and save it to file\n"
|
|
"\n"
|
|
"Usage: hf 15 dump [h] <f filename> \n"
|
|
"Options:\n"
|
|
"\th this help\n"
|
|
"\tf <name> filename, if no <name> UID will be used as filename\n"
|
|
"\n"
|
|
"Example:\n"
|
|
_YELLOW_("\thf 15 dump f\n")
|
|
_YELLOW_("\thf 15 dump f mydump"));
|
|
return PM3_SUCCESS;
|
|
}
|
|
static int usage_15_restore(void) {
|
|
const char *options[][2] = {
|
|
{"h", "this help"},
|
|
{"-2", "use slower '1 out of 256' mode"},
|
|
{"-o", "set OPTION Flag (needed for TI)"},
|
|
{"a", "use addressed mode"},
|
|
{"r <NUM>", "numbers of retries on error, default is 3"},
|
|
{"f <filename>", "load <filename>"},
|
|
{"b <block size>", "block size, default is 4"}
|
|
};
|
|
PrintAndLogEx(NORMAL, "Usage: hf 15 restore [-2] [-o] [h] [r <NUM>] [u <UID>] [f <filename>] [b <block size>]");
|
|
PrintAndLogOptions(options, 7, 3);
|
|
return PM3_SUCCESS;
|
|
}
|
|
static int usage_15_raw(void) {
|
|
const char *options[][2] = {
|
|
{"-r", "do not read response" },
|
|
{"-2", "use slower '1 out of 256' mode" },
|
|
{"-c", "calculate and append CRC" },
|
|
{"-k", "keep signal field ON after receive" },
|
|
{"", "Tip: turn on debugging for verbose output"},
|
|
};
|
|
PrintAndLogEx(NORMAL, "Usage: hf 15 raw [-r] [-2] [-k] [-c] <0A 0B 0C ... hex>\n");
|
|
PrintAndLogOptions(options, 4, 3);
|
|
return PM3_SUCCESS;
|
|
}
|
|
static int usage_15_read(void) {
|
|
PrintAndLogEx(NORMAL, "Usage: hf 15 rdbl [options] <uid|s|u|*> <page>\n"
|
|
"Options:\n"
|
|
"\t-2 use slower '1 out of 256' mode\n"
|
|
"\tuid (either): \n"
|
|
"\t <8B hex> full UID eg E011223344556677\n"
|
|
"\t u unaddressed mode\n"
|
|
"\t * scan for tag\n"
|
|
"\t <page> page number 0-255");
|
|
return PM3_SUCCESS;
|
|
}
|
|
static int usage_15_write(void) {
|
|
PrintAndLogEx(NORMAL, "Usage: hf 15 wrbl [options] <uid|s|u|*> <page> <hexdata>\n"
|
|
"Options:\n"
|
|
"\t-2 use slower '1 out of 256' mode\n"
|
|
"\t-o set OPTION Flag (needed for TI)\n"
|
|
"\tuid (either): \n"
|
|
"\t <8B hex> full UID eg E011223344556677\n"
|
|
"\t u unaddressed mode\n"
|
|
"\t * scan for tag\n"
|
|
"\t <page> page number 0-255\n"
|
|
"\t <hexdata> data to be written eg AA BB CC DD");
|
|
return PM3_SUCCESS;
|
|
}
|
|
static int usage_15_readmulti(void) {
|
|
PrintAndLogEx(NORMAL, "Usage: hf 15 readmulti [options] <uid|s|u|*> <start> <count>\n"
|
|
"Options:\n"
|
|
"\t-2 use slower '1 out of 256' mode\n"
|
|
"\tuid (either): \n"
|
|
"\t <8B hex> full UID eg E011223344556677\n"
|
|
"\t u unaddressed mode\n"
|
|
"\t * scan for tag\n"
|
|
"\t <start> 0-255, page number to start\n"
|
|
"\t <count> 1-6, number of pages");
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
static int nxp_15693_print_signature(uint8_t *uid, uint8_t *signature) {
|
|
|
|
#define PUBLIC_ECDA_KEYLEN 33
|
|
const ecdsa_publickey_t nxp_15693_public_keys[] = {
|
|
{"NXP Mifare Classic MFC1C14_x", "044F6D3F294DEA5737F0F46FFEE88A356EED95695DD7E0C27A591E6F6F65962BAF"},
|
|
{"Manufacturer Mifare Classic MFC1C14_x", "046F70AC557F5461CE5052C8E4A7838C11C7A236797E8A0730A101837C004039C2"},
|
|
{"NXP ICODE DNA, ICODE SLIX2", "048878A2A2D3EEC336B4F261A082BD71F9BE11C4E2E896648B32EFA59CEA6E59F0"},
|
|
{"NXP Public key", "04A748B6A632FBEE2C0897702B33BEA1C074998E17B84ACA04FF267E5D2C91F6DC"},
|
|
{"NXP Ultralight Ev1", "0490933BDCD6E99B4E255E3DA55389A827564E11718E017292FAF23226A96614B8"},
|
|
{"NXP NTAG21x (2013)", "04494E1A386D3D3CFE3DC10E5DE68A499B1C202DB5B132393E89ED19FE5BE8BC61"},
|
|
{"MIKRON Public key", "04f971eda742a4a80d32dcf6a814a707cc3dc396d35902f72929fdcd698b3468f2"},
|
|
{"VivoKey Spark1 Public key", "04d64bb732c0d214e7ec580736acf847284b502c25c0f7f2fa86aace1dada4387a"},
|
|
};
|
|
/*
|
|
uint8_t nxp_15693_public_keys[][PUBLIC_ECDA_KEYLEN] = {
|
|
// ICODE SLIX2 / DNA
|
|
{
|
|
0x04, 0x88, 0x78, 0xA2, 0xA2, 0xD3, 0xEE, 0xC3,
|
|
0x36, 0xB4, 0xF2, 0x61, 0xA0, 0x82, 0xBD, 0x71,
|
|
0xF9, 0xBE, 0x11, 0xC4, 0xE2, 0xE8, 0x96, 0x64,
|
|
0x8B, 0x32, 0xEF, 0xA5, 0x9C, 0xEA, 0x6E, 0x59, 0xF0
|
|
},
|
|
// unknown. Needs identification
|
|
{
|
|
0x04, 0x4F, 0x6D, 0x3F, 0x29, 0x4D, 0xEA, 0x57,
|
|
0x37, 0xF0, 0xF4, 0x6F, 0xFE, 0xE8, 0x8A, 0x35,
|
|
0x6E, 0xED, 0x95, 0x69, 0x5D, 0xD7, 0xE0, 0xC2,
|
|
0x7A, 0x59, 0x1E, 0x6F, 0x6F, 0x65, 0x96, 0x2B, 0xAF
|
|
},
|
|
// unknown. Needs identification
|
|
{
|
|
0x04, 0xA7, 0x48, 0xB6, 0xA6, 0x32, 0xFB, 0xEE,
|
|
0x2C, 0x08, 0x97, 0x70, 0x2B, 0x33, 0xBE, 0xA1,
|
|
0xC0, 0x74, 0x99, 0x8E, 0x17, 0xB8, 0x4A, 0xCA,
|
|
0x04, 0xFF, 0x26, 0x7E, 0x5D, 0x2C, 0x91, 0xF6, 0xDC
|
|
},
|
|
// manufacturer public key
|
|
{
|
|
0x04, 0x6F, 0x70, 0xAC, 0x55, 0x7F, 0x54, 0x61,
|
|
0xCE, 0x50, 0x52, 0xC8, 0xE4, 0xA7, 0x83, 0x8C,
|
|
0x11, 0xC7, 0xA2, 0x36, 0x79, 0x7E, 0x8A, 0x07,
|
|
0x30, 0xA1, 0x01, 0x83, 0x7C, 0x00, 0x40, 0x39, 0xC2
|
|
},
|
|
// MIKRON public key.
|
|
{
|
|
0x04, 0xf9, 0x71, 0xed, 0xa7, 0x42, 0xa4, 0xa8,
|
|
0x0d, 0x32, 0xdc, 0xf6, 0xa8, 0x14, 0xa7, 0x07,
|
|
0xcc, 0x3d, 0xc3, 0x96, 0xd3, 0x59, 0x02, 0xf7,
|
|
0x29, 0x29, 0xfd, 0xcd, 0x69, 0x8b, 0x34, 0x68, 0xf2
|
|
}
|
|
};
|
|
*/
|
|
uint8_t i;
|
|
uint8_t revuid[8];
|
|
for (i = 0; i < sizeof(revuid); i++) {
|
|
revuid[i] = uid[7 - i];
|
|
}
|
|
uint8_t revsign[32];
|
|
for (i = 0; i < sizeof(revsign); i++) {
|
|
revsign[i] = signature[31 - i];
|
|
}
|
|
|
|
int reason = 0;
|
|
bool is_valid = false;
|
|
for (i = 0; i < ARRAYLEN(nxp_15693_public_keys); i++) {
|
|
|
|
int dl = 0;
|
|
uint8_t key[PUBLIC_ECDA_KEYLEN];
|
|
param_gethex_to_eol(nxp_15693_public_keys[i].value, 0, key, PUBLIC_ECDA_KEYLEN, &dl);
|
|
|
|
int res = ecdsa_signature_r_s_verify(MBEDTLS_ECP_DP_SECP128R1, key, uid, 8, signature, 32, false);
|
|
is_valid = (res == 0);
|
|
if (is_valid) {
|
|
reason = 1;
|
|
break;
|
|
}
|
|
|
|
// try with sha256
|
|
res = ecdsa_signature_r_s_verify(MBEDTLS_ECP_DP_SECP128R1, key, uid, 8, signature, 32, true);
|
|
is_valid = (res == 0);
|
|
if (is_valid) {
|
|
reason = 2;
|
|
break;
|
|
}
|
|
|
|
// try with reversed uid / signature
|
|
res = ecdsa_signature_r_s_verify(MBEDTLS_ECP_DP_SECP128R1, key, revuid, sizeof(revuid), revsign, sizeof(revsign), false);
|
|
is_valid = (res == 0);
|
|
if (is_valid) {
|
|
reason = 3;
|
|
break;
|
|
}
|
|
|
|
|
|
// try with sha256
|
|
res = ecdsa_signature_r_s_verify(MBEDTLS_ECP_DP_SECP128R1, key, revuid, sizeof(revuid), revsign, sizeof(revsign), true);
|
|
is_valid = (res == 0);
|
|
if (is_valid) {
|
|
reason = 4;
|
|
break;
|
|
}
|
|
}
|
|
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(INFO, "--- " _CYAN_("Tag Signature"));
|
|
if (is_valid == false || i == ARRAYLEN(nxp_15693_public_keys)) {
|
|
PrintAndLogEx(INFO, " Elliptic curve parameters: NID_secp128r1");
|
|
PrintAndLogEx(INFO, " TAG IC Signature: %s", sprint_hex_inrow(signature, 32));
|
|
PrintAndLogEx(SUCCESS, " Signature verification: " _RED_("failed"));
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
PrintAndLogEx(INFO, " IC signature public key name: %s", nxp_15693_public_keys[i].desc);
|
|
PrintAndLogEx(INFO, "IC signature public key value: %s", nxp_15693_public_keys[i].value);
|
|
PrintAndLogEx(INFO, " Elliptic curve parameters: NID_secp128r1");
|
|
PrintAndLogEx(INFO, " TAG IC Signature: %s", sprint_hex_inrow(signature, 32));
|
|
PrintAndLogEx(SUCCESS, " Signature verification: " _GREEN_("successful"));
|
|
switch (reason) {
|
|
case 1:
|
|
PrintAndLogEx(INFO, " Params used: UID and signature, plain");
|
|
break;
|
|
case 2:
|
|
PrintAndLogEx(INFO, " Params used: UID and signature, SHA256");
|
|
break;
|
|
case 3:
|
|
PrintAndLogEx(INFO, " Params used: reversed UID and signature, plain");
|
|
break;
|
|
case 4:
|
|
PrintAndLogEx(INFO, " Params used: reversed UID and signature, SHA256");
|
|
break;
|
|
}
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
// get a product description based on the UID
|
|
// uid[8] tag uid
|
|
// returns description of the best match
|
|
static const char *getTagInfo_15(uint8_t *uid) {
|
|
uint64_t myuid, mask;
|
|
int i = 0, best = -1;
|
|
memcpy(&myuid, uid, sizeof(uint64_t));
|
|
while (uidmapping[i].mask > 0) {
|
|
mask = (~0ULL) << (64 - uidmapping[i].mask);
|
|
if ((myuid & mask) == uidmapping[i].uid) {
|
|
if (best == -1) {
|
|
best = i;
|
|
} else {
|
|
if (uidmapping[i].mask > uidmapping[best].mask) {
|
|
best = i;
|
|
}
|
|
}
|
|
}
|
|
i++;
|
|
}
|
|
|
|
if (best >= 0)
|
|
return uidmapping[best].desc;
|
|
return uidmapping[i].desc;
|
|
}
|
|
|
|
// return a clear-text message to an errorcode
|
|
static const char *TagErrorStr(uint8_t error) {
|
|
switch (error) {
|
|
case 0x01:
|
|
return "The command is not supported";
|
|
case 0x02:
|
|
return "The command is not recognized";
|
|
case 0x03:
|
|
return "The option is not supported.";
|
|
case 0x0f:
|
|
return "Unknown error.";
|
|
case 0x10:
|
|
return "The specified block is not available (doesn't exist).";
|
|
case 0x11:
|
|
return "The specified block is already -locked and thus cannot be locked again";
|
|
case 0x12:
|
|
return "The specified block is locked and its content cannot be changed.";
|
|
case 0x13:
|
|
return "The specified block was not successfully programmed.";
|
|
case 0x14:
|
|
return "The specified block was not successfully locked.";
|
|
default:
|
|
return "Reserved for Future Use or Custom command error.";
|
|
}
|
|
}
|
|
|
|
// fast method to just read the UID of a tag (collision detection not supported)
|
|
// *buf should be large enough to fit the 64bit uid
|
|
// returns 1 if succeeded
|
|
static bool getUID(bool loop, uint8_t *buf) {
|
|
|
|
uint8_t data[5];
|
|
data[0] = ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_INVENTORY | ISO15_REQINV_SLOT1;
|
|
data[1] = ISO15_CMD_INVENTORY;
|
|
data[2] = 0; // mask length
|
|
|
|
AddCrc15(data, 3);
|
|
|
|
// params
|
|
uint8_t fast = 1;
|
|
uint8_t reply = 1;
|
|
|
|
while (kbd_enter_pressed() == false) {
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, sizeof(data), fast, reply, data, sizeof(data));
|
|
PacketResponseNG resp;
|
|
if (WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
|
|
int resplen = resp.oldarg[0];
|
|
if (resplen >= 12 && CheckCrc15(resp.data.asBytes, 12)) {
|
|
|
|
if (buf)
|
|
memcpy(buf, resp.data.asBytes + 2, 8);
|
|
|
|
DropField();
|
|
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(SUCCESS, " UID: " _GREEN_("%s"), iso15693_sprintUID(NULL, buf));
|
|
PrintAndLogEx(SUCCESS, "TYPE: " _YELLOW_("%s"), getTagInfo_15(buf));
|
|
|
|
if (loop == false) {
|
|
return true;
|
|
}
|
|
}
|
|
}
|
|
if (loop == false) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
DropField();
|
|
return false;
|
|
}
|
|
|
|
// used with 'hf search'
|
|
bool readHF15Uid(bool loop, bool verbose) {
|
|
uint8_t uid[8] = {0};
|
|
if (getUID(loop, uid) == false) {
|
|
if (verbose) PrintAndLogEx(WARNING, "No tag found");
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* parses common HF 15 CMD parameters and prepares some data structures
|
|
* Parameters:
|
|
* **cmd command line
|
|
*/
|
|
static bool prepareHF15Cmd(char **cmd, uint16_t *reqlen, uint8_t *arg1, uint8_t *req, uint8_t iso15cmd) { // reqlen arg0
|
|
int temp;
|
|
uint8_t uid[8] = {0x00};
|
|
uint32_t tmpreqlen = 0;
|
|
|
|
// strip
|
|
while (**cmd == ' ' || **cmd == '\t')(*cmd)++;
|
|
|
|
if (strstr(*cmd, "-2") == *cmd) {
|
|
*arg1 = 0; // use 1of256
|
|
(*cmd) += 2;
|
|
}
|
|
|
|
// strip
|
|
while (**cmd == ' ' || **cmd == '\t')(*cmd)++;
|
|
|
|
if (strstr(*cmd, "-o") == *cmd) {
|
|
req[tmpreqlen] = ISO15_REQ_OPTION;
|
|
(*cmd) += 2;
|
|
}
|
|
|
|
// strip
|
|
while (**cmd == ' ' || **cmd == '\t')(*cmd)++;
|
|
|
|
switch (**cmd) {
|
|
case 0:
|
|
PrintAndLogEx(WARNING, "missing addr");
|
|
return false;
|
|
break;
|
|
case 'u':
|
|
case 'U':
|
|
// unaddressed mode may not be supported by all vendors
|
|
req[tmpreqlen++] |= ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY;
|
|
req[tmpreqlen++] = iso15cmd;
|
|
break;
|
|
case '*':
|
|
// we scan for the UID ourself
|
|
req[tmpreqlen++] |= ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY | ISO15_REQ_ADDRESS;
|
|
req[tmpreqlen++] = iso15cmd;
|
|
|
|
if (getUID(false, uid) == false) {
|
|
PrintAndLogEx(WARNING, "No tag found");
|
|
return false;
|
|
}
|
|
memcpy(&req[tmpreqlen], uid, sizeof(uid));
|
|
PrintAndLogEx(SUCCESS, "Detected UID " _GREEN_("%s"), iso15693_sprintUID(NULL, uid));
|
|
tmpreqlen += sizeof(uid);
|
|
break;
|
|
default:
|
|
req[tmpreqlen++] |= ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY | ISO15_REQ_ADDRESS;
|
|
req[tmpreqlen++] = iso15cmd;
|
|
// parse UID
|
|
for (int i = 0; i < 8 && (*cmd)[i * 2] && (*cmd)[i * 2 + 1]; i++) {
|
|
sscanf((char[]) {(*cmd)[i * 2], (*cmd)[i * 2 + 1], 0}, "%X", &temp);
|
|
uid[7 - i] = temp & 0xff;
|
|
}
|
|
|
|
PrintAndLogEx(SUCCESS, "Using UID " _GREEN_("%s"), iso15693_sprintUID(NULL, uid));
|
|
memcpy(&req[tmpreqlen], uid, sizeof(uid));
|
|
tmpreqlen += sizeof(uid);
|
|
break;
|
|
}
|
|
// skip to next space
|
|
while (**cmd != ' ' && **cmd != '\t')(*cmd)++;
|
|
// skip over the space
|
|
while (**cmd == ' ' || **cmd == '\t')(*cmd)++;
|
|
|
|
*reqlen = tmpreqlen;
|
|
return true;
|
|
}
|
|
|
|
// Mode 3
|
|
static int CmdHF15Demod(const char *Cmd) {
|
|
|
|
CLIParserContext *ctx;
|
|
CLIParserInit(&ctx, "hf 15 demod",
|
|
"Tries to demodulate / decode ISO15693, from downloaded samples.\n"
|
|
"Gather samples with 'hf 15 samples' / 'hf 15 sniff'",
|
|
"hf 15 demod\n");
|
|
|
|
void *argtable[] = {
|
|
arg_param_begin,
|
|
arg_param_end
|
|
};
|
|
CLIExecWithReturn(ctx, Cmd, argtable, true);
|
|
CLIParserFree(ctx);
|
|
|
|
// The sampling rate is 106.353 ksps/s, for T = 18.8 us
|
|
int i, j;
|
|
int max = 0, maxPos = 0;
|
|
int skip = 4;
|
|
|
|
if (GraphTraceLen < 1000) {
|
|
PrintAndLogEx(FAILED, "Too few samples in GraphBuffer. Need more than 1000");
|
|
PrintAndLogEx(HINT, "Run " _YELLOW_("`hf 15 samples`") " to collect and download data");
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
// First, correlate for SOF
|
|
for (i = 0; i < 1000; i++) {
|
|
int corr = 0;
|
|
for (j = 0; j < ARRAYLEN(FrameSOF); j += skip) {
|
|
corr += FrameSOF[j] * GraphBuffer[i + (j / skip)];
|
|
}
|
|
if (corr > max) {
|
|
max = corr;
|
|
maxPos = i;
|
|
}
|
|
}
|
|
|
|
PrintAndLogEx(INFO, "SOF at %d, correlation %zu", maxPos, max / (ARRAYLEN(FrameSOF) / skip));
|
|
|
|
i = maxPos + ARRAYLEN(FrameSOF) / skip;
|
|
int k = 0;
|
|
uint8_t outBuf[2048] = {0};
|
|
memset(outBuf, 0, sizeof(outBuf));
|
|
uint8_t mask = 0x01;
|
|
for (;;) {
|
|
int corr0 = 0, corr1 = 0, corrEOF = 0;
|
|
for (j = 0; j < ARRAYLEN(Logic0); j += skip) {
|
|
corr0 += Logic0[j] * GraphBuffer[i + (j / skip)];
|
|
}
|
|
for (j = 0; j < ARRAYLEN(Logic1); j += skip) {
|
|
corr1 += Logic1[j] * GraphBuffer[i + (j / skip)];
|
|
}
|
|
for (j = 0; j < ARRAYLEN(FrameEOF); j += skip) {
|
|
corrEOF += FrameEOF[j] * GraphBuffer[i + (j / skip)];
|
|
}
|
|
// Even things out by the length of the target waveform.
|
|
corr0 *= 4;
|
|
corr1 *= 4;
|
|
|
|
if (corrEOF > corr1 && corrEOF > corr0) {
|
|
PrintAndLogEx(INFO, "EOF at %d", i);
|
|
break;
|
|
} else if (corr1 > corr0) {
|
|
i += ARRAYLEN(Logic1) / skip;
|
|
outBuf[k] |= mask;
|
|
} else {
|
|
i += ARRAYLEN(Logic0) / skip;
|
|
}
|
|
|
|
mask <<= 1;
|
|
if (mask == 0) {
|
|
k++;
|
|
mask = 0x01;
|
|
}
|
|
|
|
if ((i + (int)ARRAYLEN(FrameEOF)) >= GraphTraceLen) {
|
|
PrintAndLogEx(INFO, "ran off end!");
|
|
break;
|
|
}
|
|
|
|
if (k > 2048) {
|
|
PrintAndLogEx(INFO, "ran out of buffer");
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (mask != 0x01) {
|
|
PrintAndLogEx(WARNING, "Warning, uneven octet! (discard extra bits!)");
|
|
PrintAndLogEx(INFO, " mask = %02x", mask);
|
|
}
|
|
|
|
if (k == 0) {
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
i = 0;
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(INFO, "Got %d octets, decoded as following", k);
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(SUCCESS, " idx | data");
|
|
PrintAndLogEx(SUCCESS, "-----+-------------------------------------------------");
|
|
if (k / 16 > 0) {
|
|
for (; i < k; i += 16) {
|
|
PrintAndLogEx(SUCCESS, " %3i | %s", i, sprint_hex(outBuf + i, 16));
|
|
}
|
|
}
|
|
|
|
uint8_t mod = (k % 16);
|
|
if (mod > 0) {
|
|
PrintAndLogEx(SUCCESS, " %3i | %s", i, sprint_hex(outBuf + i, mod));
|
|
}
|
|
PrintAndLogEx(SUCCESS, "-----+-------------------------------------------------");
|
|
if (k > 2) {
|
|
PrintAndLogEx(SUCCESS, "--> CRC %04x", Crc15(outBuf, k - 2));
|
|
}
|
|
PrintAndLogEx(NORMAL, "");
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
// * Acquire Samples as Reader (enables carrier, sends inquiry)
|
|
//helptext
|
|
static int CmdHF15Samples(const char *Cmd) {
|
|
|
|
CLIParserContext *ctx;
|
|
CLIParserInit(&ctx, "hf 15 samples",
|
|
"Acquire samples as Reader (enables carrier, send inquiry\n"
|
|
"and download it to graphbuffer. Try 'hf 15 demod' to try to demodulate/decode signal",
|
|
"hf 15 samples");
|
|
|
|
void *argtable[] = {
|
|
arg_param_begin,
|
|
arg_param_end
|
|
};
|
|
CLIExecWithReturn(ctx, Cmd, argtable, false);
|
|
CLIParserFree(ctx);
|
|
|
|
clearCommandBuffer();
|
|
SendCommandNG(CMD_HF_ISO15693_ACQ_RAW_ADC, NULL, 0);
|
|
|
|
getSamples(0, true);
|
|
|
|
PrintAndLogEx(HINT, "Try `" _YELLOW_("hf 15 demod") "` to decode signal");
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
// Get NXP system information from SLIX2 tag/VICC
|
|
static int NxpSysInfo(uint8_t *uid) {
|
|
|
|
if (uid == NULL) {
|
|
return PM3_EINVARG;
|
|
}
|
|
|
|
uint8_t req[PM3_CMD_DATA_SIZE] = {0};
|
|
uint8_t fast = 1;
|
|
uint8_t reply = 1;
|
|
uint16_t reqlen = 0;
|
|
|
|
req[reqlen++] |= ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY | ISO15_REQ_ADDRESS;
|
|
req[reqlen++] = ISO15_CMD_GETNXPSYSTEMINFO;
|
|
req[reqlen++] = 0x04; // IC manufacturer code
|
|
memcpy(req + 3, uid, 8); // add UID
|
|
reqlen += 8;
|
|
|
|
AddCrc15(req, reqlen);
|
|
reqlen += 2;
|
|
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, reqlen, fast, reply, req, reqlen);
|
|
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
PrintAndLogEx(WARNING, "iso15693 timeout");
|
|
DropField();
|
|
return PM3_ETIMEOUT;
|
|
}
|
|
|
|
DropField();
|
|
|
|
int status = resp.oldarg[0];
|
|
if (status == PM3_ETEAROFF) {
|
|
return status;
|
|
}
|
|
|
|
if (status < 2) {
|
|
PrintAndLogEx(WARNING, "iso15693 card doesn't answer to NXP systeminfo command");
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
uint8_t *recv = resp.data.asBytes;
|
|
|
|
if ((recv[0] & ISO15_RES_ERROR) == ISO15_RES_ERROR) {
|
|
PrintAndLogEx(ERR, "iso15693 card returned error %i: %s", recv[0], TagErrorStr(recv[0]));
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
bool support_signature = (recv[5] & 0x01);
|
|
bool support_easmode = (recv[4] & 0x03);
|
|
|
|
PrintAndLogEx(INFO, "--------- " _CYAN_("NXP Sysinfo") " ---------");
|
|
PrintAndLogEx(INFO, " raw : %s", sprint_hex(recv, 8));
|
|
PrintAndLogEx(INFO, " Password protection configuration:");
|
|
PrintAndLogEx(INFO, " * Page L read%s password protected", ((recv[2] & 0x01) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * Page L write%s password protected", ((recv[2] & 0x02) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * Page H read%s password protected", ((recv[2] & 0x08) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * Page H write%s password protected", ((recv[2] & 0x20) ? "" : " not"));
|
|
|
|
PrintAndLogEx(INFO, " Lock bits:");
|
|
PrintAndLogEx(INFO, " * AFI%s locked", ((recv[3] & 0x01) ? "" : " not")); // AFI lock bit
|
|
PrintAndLogEx(INFO, " * EAS%s locked", ((recv[3] & 0x02) ? "" : " not")); // EAS lock bit
|
|
PrintAndLogEx(INFO, " * DSFID%s locked", ((recv[3] & 0x03) ? "" : " not")); // DSFID lock bit
|
|
PrintAndLogEx(INFO, " * Password protection configuration%s locked", ((recv[3] & 0x04) ? "" : " not")); // Password protection pointer address and access conditions lock bit
|
|
|
|
PrintAndLogEx(INFO, " Features:");
|
|
PrintAndLogEx(INFO, " * User memory password protection%s supported", ((recv[4] & 0x01) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * Counter feature%s supported", ((recv[4] & 0x02) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * EAS ID%s supported by EAS ALARM command", support_easmode ? "" : " not");
|
|
PrintAndLogEx(INFO, " * EAS password protection%s supported", ((recv[4] & 0x04) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * AFI password protection%s supported", ((recv[4] & 0x10) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * Extended mode%s supported by INVENTORY READ command", ((recv[4] & 0x20) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * EAS selection%s supported by extended mode in INVENTORY READ command", ((recv[4] & 0x40) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * READ SIGNATURE command%s supported", support_signature ? "" : " not");
|
|
PrintAndLogEx(INFO, " * Password protection for READ SIGNATURE command%s supported", ((recv[5] & 0x02) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * STAY QUIET PERSISTENT command%s supported", ((recv[5] & 0x03) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * ENABLE PRIVACY command%s supported", ((recv[5] & 0x10) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * DESTROY command%s supported", ((recv[5] & 0x20) ? "" : " not"));
|
|
PrintAndLogEx(INFO, " * Additional 32 bits feature flags are%s transmitted", ((recv[5] & 0x80) ? "" : " not"));
|
|
|
|
if (support_easmode) {
|
|
reqlen = 0;
|
|
req[reqlen++] |= ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY | ISO15_REQ_ADDRESS;
|
|
req[reqlen++] = ISO15_CMD_EASALARM;
|
|
req[reqlen++] = 0x04; // IC manufacturer code
|
|
memcpy(req + 3, uid, 8); // add UID
|
|
reqlen += 8;
|
|
|
|
AddCrc15(req, reqlen);
|
|
reqlen += 2;
|
|
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, reqlen, fast, reply, req, reqlen);
|
|
|
|
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
PrintAndLogEx(WARNING, "iso15693 timeout");
|
|
} else {
|
|
PrintAndLogEx(NORMAL, "");
|
|
|
|
status = resp.oldarg[0];
|
|
if (status < 2) {
|
|
PrintAndLogEx(INFO, " EAS (Electronic Article Surveillance) is not active");
|
|
} else {
|
|
recv = resp.data.asBytes;
|
|
|
|
if (!(recv[0] & ISO15_RES_ERROR)) {
|
|
PrintAndLogEx(INFO, " EAS (Electronic Article Surveillance) is active.");
|
|
PrintAndLogEx(INFO, " EAS sequence: %s", sprint_hex(recv + 1, 32));
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (support_signature) {
|
|
// Check if we can also read the signature
|
|
reqlen = 0;
|
|
req[reqlen++] |= ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY | ISO15_REQ_ADDRESS;
|
|
req[reqlen++] = ISO15_CMD_READSIGNATURE;
|
|
req[reqlen++] = 0x04; // IC manufacturer code
|
|
memcpy(req + 3, uid, 8); // add UID
|
|
reqlen += 8;
|
|
|
|
AddCrc15(req, reqlen);
|
|
reqlen += 2;
|
|
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, reqlen, fast, reply, req, reqlen);
|
|
|
|
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
PrintAndLogEx(WARNING, "iso15693 timeout");
|
|
DropField();
|
|
return PM3_ETIMEOUT;
|
|
}
|
|
|
|
DropField();
|
|
|
|
status = resp.oldarg[0];
|
|
if (status < 2) {
|
|
PrintAndLogEx(WARNING, "iso15693 card doesn't answer to READ SIGNATURE command");
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
recv = resp.data.asBytes;
|
|
|
|
if ((recv[0] & ISO15_RES_ERROR) == ISO15_RES_ERROR) {
|
|
PrintAndLogEx(ERR, "iso15693 card returned error %i: %s", recv[0], TagErrorStr(recv[0]));
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
uint8_t signature[32] = {0x00};
|
|
memcpy(signature, recv + 1, 32);
|
|
|
|
nxp_15693_print_signature(uid, signature);
|
|
}
|
|
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* Commandline handling: HF15 CMD SYSINFO
|
|
* get system information from tag/VICC
|
|
*/
|
|
static int CmdHF15Info(const char *Cmd) {
|
|
|
|
char cmdp = tolower(param_getchar(Cmd, 0));
|
|
if (strlen(Cmd) < 1 || cmdp == 'h') return usage_15_info();
|
|
|
|
PacketResponseNG resp;
|
|
uint8_t req[PM3_CMD_DATA_SIZE] = {0};
|
|
uint16_t reqlen;
|
|
uint8_t fast = 1;
|
|
uint8_t reply = 1;
|
|
uint8_t uid[8] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
|
|
char cmdbuf[100] = {0};
|
|
char *cmd = cmdbuf;
|
|
strncpy(cmd, Cmd, sizeof(cmdbuf) - 1);
|
|
|
|
if (prepareHF15Cmd(&cmd, &reqlen, &fast, req, ISO15_CMD_SYSINFO) == false)
|
|
return PM3_SUCCESS;
|
|
|
|
AddCrc15(req, reqlen);
|
|
reqlen += 2;
|
|
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, reqlen, fast, reply, req, reqlen);
|
|
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
PrintAndLogEx(WARNING, "iso15693 timeout");
|
|
DropField();
|
|
return PM3_ETIMEOUT;
|
|
}
|
|
|
|
DropField();
|
|
|
|
int status = resp.oldarg[0];
|
|
if (status == PM3_ETEAROFF) {
|
|
return status;
|
|
}
|
|
if (status < 2) {
|
|
PrintAndLogEx(WARNING, "iso15693 card doesn't answer to systeminfo command (%d)", status);
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
uint8_t *data = resp.data.asBytes;
|
|
|
|
if ((data[0] & ISO15_RES_ERROR) == ISO15_RES_ERROR) {
|
|
PrintAndLogEx(ERR, "iso15693 card returned error %i: %s", data[0], TagErrorStr(data[0]));
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
memcpy(uid, data + 2, sizeof(uid));
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(INFO, "--- " _CYAN_("Tag Information") " ---------------------------");
|
|
PrintAndLogEx(INFO, "-------------------------------------------------------------");
|
|
PrintAndLogEx(SUCCESS, " TYPE: " _YELLOW_("%s"), getTagInfo_15(data + 2));
|
|
PrintAndLogEx(SUCCESS, " UID: " _GREEN_("%s"), iso15693_sprintUID(NULL, uid));
|
|
PrintAndLogEx(SUCCESS, " SYSINFO: %s", sprint_hex(data, status - 2));
|
|
|
|
// DSFID
|
|
if (data[1] & 0x01)
|
|
PrintAndLogEx(SUCCESS, " - DSFID supported [0x%02X]", data[10]);
|
|
else
|
|
PrintAndLogEx(SUCCESS, " - DSFID not supported");
|
|
|
|
// AFI
|
|
if (data[1] & 0x02)
|
|
PrintAndLogEx(SUCCESS, " - AFI supported [0x%02X]", data[11]);
|
|
else
|
|
PrintAndLogEx(SUCCESS, " - AFI not supported");
|
|
|
|
// IC reference
|
|
if (data[1] & 0x08)
|
|
PrintAndLogEx(SUCCESS, " - IC reference supported [0x%02X]", data[14]);
|
|
else
|
|
PrintAndLogEx(SUCCESS, " - IC reference not supported");
|
|
|
|
// memory
|
|
if (data[1] & 0x04) {
|
|
PrintAndLogEx(SUCCESS, " - Tag provides info on memory layout (vendor dependent)");
|
|
uint8_t blocks = data[12] + 1;
|
|
uint8_t size = (data[13] & 0x1F);
|
|
PrintAndLogEx(SUCCESS, " %u (or %u) bytes/blocks x %u blocks", size + 1, size, blocks);
|
|
} else {
|
|
PrintAndLogEx(SUCCESS, " - Tag does not provide information on memory layout");
|
|
}
|
|
|
|
// Check if SLIX2 and attempt to get NXP System Information
|
|
PrintAndLogEx(DEBUG, "4 & 08 :: %02x 7 == 1 :: %u 8 == 4 :: %u", data[4], data[7], data[8]);
|
|
if (data[8] == 0x04 && data[7] == 0x01 && data[4] & 0x80) {
|
|
return NxpSysInfo(uid);
|
|
}
|
|
|
|
PrintAndLogEx(NORMAL, "");
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
// Sniff Activity without enabling carrier
|
|
static int CmdHF15Sniff(const char *Cmd) {
|
|
CLIParserContext *ctx;
|
|
CLIParserInit(&ctx, "hf 15 sniff",
|
|
"Sniff activity without enabling carrier",
|
|
"hf 15 sniff\n");
|
|
|
|
void *argtable[] = {
|
|
arg_param_begin,
|
|
arg_param_end
|
|
};
|
|
CLIExecWithReturn(ctx, Cmd, argtable, true);
|
|
CLIParserFree(ctx);
|
|
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandNG(CMD_HF_ISO15693_SNIFF, NULL, 0);
|
|
|
|
WaitForResponse(CMD_HF_ISO15693_SNIFF, &resp);
|
|
|
|
PrintAndLogEx(HINT, "Try `" _YELLOW_("hf 15 list") "` to view captured tracelog");
|
|
PrintAndLogEx(HINT, "Try `" _YELLOW_("trace save h") "` to save tracelog for later analysing");
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
static int CmdHF15Reader(const char *Cmd) {
|
|
CLIParserContext *ctx;
|
|
CLIParserInit(&ctx, "hf 15 reader",
|
|
"Act as a ISO15693 reader. Look for ISO15693 tags until Enter or the pm3 button is pressed\n",
|
|
"hf 15 reader\n"
|
|
"hf 15 reader -1");
|
|
|
|
void *argtable[] = {
|
|
arg_param_begin,
|
|
arg_lit0("1", "one", "read once"),
|
|
arg_param_end
|
|
};
|
|
CLIExecWithReturn(ctx, Cmd, argtable, true);
|
|
bool read_once = arg_get_lit(ctx, 1);
|
|
CLIParserFree(ctx);
|
|
|
|
PrintAndLogEx(INFO, "Starting ISO15 reader mode");
|
|
PrintAndLogEx(INFO, "press " _YELLOW_("`enter`") " to cancel");
|
|
readHF15Uid(!read_once, true);
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
// Simulation is still not working very good
|
|
// helptext
|
|
static int CmdHF15Sim(const char *Cmd) {
|
|
|
|
CLIParserContext *ctx;
|
|
CLIParserInit(&ctx, "hf 15 sim",
|
|
"Simulate a ISO15693 tag\n",
|
|
"hf 15 sim -u E011223344556677");
|
|
|
|
void *argtable[] = {
|
|
arg_param_begin,
|
|
arg_str1("u", "uid", "<8b hex>", "UID eg E011223344556677"),
|
|
arg_param_end
|
|
};
|
|
CLIExecWithReturn(ctx, Cmd, argtable, false);
|
|
|
|
struct {
|
|
uint8_t uid[8];
|
|
} PACKED payload;
|
|
|
|
int uidlen = 0;
|
|
CLIGetHexWithReturn(ctx, 1, payload.uid, &uidlen);
|
|
CLIParserFree(ctx);
|
|
|
|
if (uidlen != 9) {
|
|
PrintAndLogEx(WARNING, "UID must include 16 HEX symbols");
|
|
return PM3_EINVARG;
|
|
}
|
|
|
|
PrintAndLogEx(SUCCESS, "Starting simulating UID " _YELLOW_("%s"), iso15693_sprintUID(NULL, payload.uid));
|
|
PrintAndLogEx(INFO, "press " _YELLOW_("`enter`") " to cancel");
|
|
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandNG(CMD_HF_ISO15693_SIMULATE, (uint8_t *)&payload, sizeof(payload));
|
|
WaitForResponse(CMD_HF_ISO15693_SIMULATE, &resp);
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
// finds the AFI (Application Family Identifier) of a card, by trying all values
|
|
// (There is no standard way of reading the AFI, although some tags support this)
|
|
// helptext
|
|
static int CmdHF15FindAfi(const char *Cmd) {
|
|
CLIParserContext *ctx;
|
|
CLIParserInit(&ctx, "hf 15 findafi",
|
|
"This command attempts to brute force AFI of an ISO15693 tag\n",
|
|
"hf 15 findafi");
|
|
|
|
void *argtable[] = {
|
|
arg_param_begin,
|
|
arg_param_end
|
|
};
|
|
CLIExecWithReturn(ctx, Cmd, argtable, false);
|
|
CLIParserFree(ctx);
|
|
|
|
PrintAndLogEx(SUCCESS, "press pm3-button to cancel");
|
|
|
|
clearCommandBuffer();
|
|
PacketResponseNG resp;
|
|
SendCommandMIX(CMD_HF_ISO15693_FINDAFI, strtol(Cmd, NULL, 0), 0, 0, NULL, 0);
|
|
|
|
uint32_t timeout = 0;
|
|
while (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
timeout++;
|
|
|
|
// should be done in about 2 minutes
|
|
if (timeout > 180) {
|
|
PrintAndLogEx(WARNING, "\nNo response from Proxmark3. Aborting...");
|
|
DropField();
|
|
return PM3_ETIMEOUT;
|
|
}
|
|
}
|
|
|
|
DropField();
|
|
return resp.status; // PM3_EOPABORTED or PM3_SUCCESS
|
|
}
|
|
|
|
// Writes the AFI (Application Family Identifier) of a card
|
|
static int CmdHF15WriteAfi(const char *Cmd) {
|
|
|
|
char cmdp = tolower(param_getchar(Cmd, 0));
|
|
if (strlen(Cmd) < 3 || cmdp == 'h') return usage_15_writeafi();
|
|
|
|
// arg: len, speed, recv?
|
|
// arg0 (datalen, cmd len? .arg0 == crc?)
|
|
// arg1 (speed == 0 == 1 of 256, == 1 == 1 of 4 )
|
|
// arg2 (recv == 1 == expect a response)
|
|
uint8_t req[PM3_CMD_DATA_SIZE] = {0};
|
|
uint16_t reqlen = 0;
|
|
uint8_t fast = 1;
|
|
uint8_t reply = 1;
|
|
|
|
char cmdbuf[100] = {0};
|
|
char *cmd = cmdbuf;
|
|
strncpy(cmd, Cmd, sizeof(cmdbuf) - 1);
|
|
|
|
if (!prepareHF15Cmd(&cmd, &reqlen, &fast, req, ISO15_CMD_WRITEAFI))
|
|
return PM3_SUCCESS;
|
|
|
|
req[0] |= ISO15_REQ_OPTION; // Since we are writing
|
|
|
|
int afinum = strtol(cmd, NULL, 0);
|
|
|
|
req[reqlen++] = (uint8_t)afinum;
|
|
|
|
AddCrc15(req, reqlen);
|
|
reqlen += 2;
|
|
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, reqlen, fast, reply, req, reqlen);
|
|
|
|
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
PrintAndLogEx(ERR, "iso15693 timeout");
|
|
DropField();
|
|
return PM3_ETIMEOUT;
|
|
}
|
|
DropField();
|
|
|
|
int status = resp.oldarg[0];
|
|
if (status == PM3_ETEAROFF) {
|
|
return status;
|
|
}
|
|
|
|
uint8_t *data = resp.data.asBytes;
|
|
|
|
if ((data[0] & ISO15_RES_ERROR) == ISO15_RES_ERROR) {
|
|
PrintAndLogEx(ERR, "iso15693 card returned error %i: %s", data[0], TagErrorStr(data[0]));
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(SUCCESS, "Wrote AFI 0x%02X", afinum);
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
// Writes the DSFID (Data Storage Format Identifier) of a card
|
|
static int CmdHF15WriteDsfid(const char *Cmd) {
|
|
|
|
char cmdp = tolower(param_getchar(Cmd, 0));
|
|
if (strlen(Cmd) < 3 || cmdp == 'h') return usage_15_writedsfid();
|
|
|
|
// arg: len, speed, recv?
|
|
// arg0 (datalen, cmd len? .arg0 == crc?)
|
|
// arg1 (speed == 0 == 1 of 256, == 1 == 1 of 4 )
|
|
// arg2 (recv == 1 == expect a response)
|
|
uint8_t req[PM3_CMD_DATA_SIZE] = {0};
|
|
uint16_t reqlen = 0;
|
|
uint8_t fast = 1;
|
|
uint8_t reply = 1;
|
|
int dsfidnum;
|
|
|
|
char cmdbuf[100] = {0};
|
|
char *cmd = cmdbuf;
|
|
strncpy(cmd, Cmd, sizeof(cmdbuf) - 1);
|
|
|
|
if (prepareHF15Cmd(&cmd, &reqlen, &fast, req, ISO15_CMD_WRITEDSFID) == false)
|
|
return PM3_SUCCESS;
|
|
|
|
req[0] |= ISO15_REQ_OPTION; // Since we are writing
|
|
|
|
dsfidnum = strtol(cmd, NULL, 0);
|
|
|
|
req[reqlen++] = (uint8_t)dsfidnum;
|
|
|
|
AddCrc15(req, reqlen);
|
|
reqlen += 2;
|
|
|
|
// PrintAndLogEx(NORMAL, "cmd %s", sprint_hex(req, reqlen) );
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, reqlen, fast, reply, req, reqlen);
|
|
|
|
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
PrintAndLogEx(ERR, "iso15693 timeout");
|
|
DropField();
|
|
return PM3_ETIMEOUT;
|
|
}
|
|
|
|
DropField();
|
|
int status = resp.oldarg[0];
|
|
if (status == PM3_ETEAROFF) {
|
|
return status;
|
|
}
|
|
|
|
uint8_t *data = resp.data.asBytes;
|
|
|
|
if ((data[0] & ISO15_RES_ERROR) == ISO15_RES_ERROR) {
|
|
PrintAndLogEx(ERR, "iso15693 card returned error %i: %s", data[0], TagErrorStr(data[0]));
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(SUCCESS, "Wrote DSFID 0x%02X", dsfidnum);
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
// Reads all memory pages
|
|
// need to write to file
|
|
static int CmdHF15Dump(const char *Cmd) {
|
|
|
|
uint8_t fileNameLen = 0;
|
|
char filename[FILE_PATH_SIZE] = {0};
|
|
char *fptr = filename;
|
|
bool errors = false;
|
|
uint8_t cmdp = 0;
|
|
uint8_t uid[8] = {0, 0, 0, 0, 0, 0, 0, 0};
|
|
|
|
while (param_getchar(Cmd, cmdp) != 0x00 && !errors) {
|
|
switch (tolower(param_getchar(Cmd, cmdp))) {
|
|
case 'h':
|
|
return usage_15_dump();
|
|
case 'f':
|
|
fileNameLen = param_getstr(Cmd, cmdp + 1, filename, FILE_PATH_SIZE);
|
|
cmdp += 2;
|
|
break;
|
|
default:
|
|
PrintAndLogEx(WARNING, "Unknown parameter '%c'\n", param_getchar(Cmd, cmdp));
|
|
errors = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
//Validations
|
|
if (errors) return usage_15_dump();
|
|
|
|
if (getUID(false, uid) == false) {
|
|
PrintAndLogEx(WARNING, "No tag found.");
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
if (fileNameLen < 1) {
|
|
PrintAndLogEx(INFO, "Using UID as filename");
|
|
fptr += sprintf(fptr, "hf-15-");
|
|
FillFileNameByUID(fptr, uid, "-dump", sizeof(uid));
|
|
}
|
|
// detect blocksize from card :)
|
|
|
|
PrintAndLogEx(SUCCESS, "Reading memory from tag UID " _YELLOW_("%s"), iso15693_sprintUID(NULL, uid));
|
|
|
|
int blocknum = 0;
|
|
uint8_t *recv = NULL;
|
|
|
|
// memory.
|
|
t15memory_t mem[256];
|
|
|
|
uint8_t data[256 * 4] = {0};
|
|
memset(data, 0, sizeof(data));
|
|
|
|
PacketResponseNG resp;
|
|
uint8_t req[13];
|
|
req[0] = ISO15_REQ_SUBCARRIER_SINGLE | ISO15_REQ_DATARATE_HIGH | ISO15_REQ_NONINVENTORY | ISO15_REQ_ADDRESS;
|
|
req[1] = ISO15_CMD_READ;
|
|
|
|
// copy uid to read command
|
|
memcpy(req + 2, uid, sizeof(uid));
|
|
|
|
for (int retry = 0; retry < 5; retry++) {
|
|
|
|
req[10] = blocknum;
|
|
AddCrc15(req, 11);
|
|
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, sizeof(req), 1, 1, req, sizeof(req));
|
|
|
|
if (WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
|
|
int len = resp.oldarg[0];
|
|
if (len == PM3_ETEAROFF) {
|
|
continue;
|
|
}
|
|
if (len < 2) {
|
|
PrintAndLogEx(FAILED, "iso15693 command failed");
|
|
continue;
|
|
}
|
|
|
|
recv = resp.data.asBytes;
|
|
|
|
if (CheckCrc15(recv, len) == false) {
|
|
PrintAndLogEx(FAILED, "crc (" _RED_("fail") ")");
|
|
continue;
|
|
}
|
|
|
|
if ((recv[0] & ISO15_RES_ERROR) == ISO15_RES_ERROR) {
|
|
PrintAndLogEx(FAILED, "Tag returned Error %i: %s", recv[1], TagErrorStr(recv[1]));
|
|
break;
|
|
}
|
|
|
|
mem[blocknum].lock = resp.data.asBytes[0];
|
|
memcpy(mem[blocknum].block, resp.data.asBytes + 1, 4);
|
|
memcpy(data + (blocknum * 4), resp.data.asBytes + 1, 4);
|
|
|
|
retry = 0;
|
|
blocknum++;
|
|
|
|
PrintAndLogEx(NORMAL, "." NOLF);
|
|
fflush(stdout);
|
|
}
|
|
}
|
|
|
|
DropField();
|
|
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(NORMAL, "block# | data |lck| ascii");
|
|
PrintAndLogEx(NORMAL, "---------+--------------+---+----------");
|
|
for (int i = 0; i < blocknum; i++) {
|
|
PrintAndLogEx(NORMAL, "%3d/0x%02X | %s | %d | %s", i, i, sprint_hex(mem[i].block, 4), mem[i].lock, sprint_ascii(mem[i].block, 4));
|
|
}
|
|
PrintAndLogEx(NORMAL, "\n");
|
|
|
|
size_t datalen = blocknum * 4;
|
|
saveFile(filename, ".bin", data, datalen);
|
|
saveFileEML(filename, data, datalen, 4);
|
|
saveFileJSON(filename, jsf15, data, datalen, NULL);
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
static int CmdHF15List(const char *Cmd) {
|
|
char args[128] = {0};
|
|
if (strlen(Cmd) == 0) {
|
|
snprintf(args, sizeof(args), "-t 15");
|
|
} else {
|
|
strncpy(args, Cmd, sizeof(args) - 1);
|
|
}
|
|
return CmdTraceList(args);
|
|
}
|
|
|
|
static int CmdHF15Raw(const char *Cmd) {
|
|
|
|
char cmdp = tolower(param_getchar(Cmd, 0));
|
|
if (strlen(Cmd) < 3 || cmdp == 'h') return usage_15_raw();
|
|
|
|
int reply = 1, fast = 1, i = 0;
|
|
bool crc = false, keep_field_on = false;
|
|
char buf[5] = "";
|
|
uint8_t data[100];
|
|
uint32_t datalen = 0, temp;
|
|
|
|
// strip
|
|
while (*Cmd == ' ' || *Cmd == '\t') Cmd++;
|
|
|
|
while (Cmd[i] != '\0') {
|
|
if (Cmd[i] == ' ' || Cmd[i] == '\t') { i++; continue; }
|
|
if (Cmd[i] == '-') {
|
|
switch (tolower(Cmd[i + 1])) {
|
|
case 'r':
|
|
reply = 0;
|
|
break;
|
|
case '2':
|
|
fast = 0;
|
|
break;
|
|
case 'c':
|
|
crc = true;
|
|
break;
|
|
case 'k':
|
|
keep_field_on = true;
|
|
break;
|
|
default:
|
|
PrintAndLogEx(WARNING, "Invalid option");
|
|
return PM3_EINVARG;
|
|
}
|
|
i += 2;
|
|
continue;
|
|
}
|
|
if ((Cmd[i] >= '0' && Cmd[i] <= '9') ||
|
|
(Cmd[i] >= 'a' && Cmd[i] <= 'f') ||
|
|
(Cmd[i] >= 'A' && Cmd[i] <= 'F')) {
|
|
buf[strlen(buf) + 1] = 0;
|
|
buf[strlen(buf)] = Cmd[i];
|
|
i++;
|
|
|
|
if (strlen(buf) >= 2) {
|
|
sscanf(buf, "%x", &temp);
|
|
data[datalen] = (uint8_t)(temp & 0xff);
|
|
datalen++;
|
|
*buf = 0;
|
|
}
|
|
continue;
|
|
}
|
|
PrintAndLogEx(WARNING, "Invalid char on input");
|
|
return PM3_EINVARG;
|
|
}
|
|
|
|
if (crc) {
|
|
AddCrc15(data, datalen);
|
|
datalen += 2;
|
|
}
|
|
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, datalen, fast, reply, data, datalen);
|
|
|
|
if (reply) {
|
|
if (WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
int len = resp.oldarg[0];
|
|
if (len == PM3_ETEAROFF) {
|
|
DropField();
|
|
return len;
|
|
}
|
|
if (len < 2) {
|
|
PrintAndLogEx(WARNING, "command failed");
|
|
} else {
|
|
PrintAndLogEx(SUCCESS, "received %i octets", len);
|
|
PrintAndLogEx(SUCCESS, "%s", sprint_hex(resp.data.asBytes, len));
|
|
}
|
|
} else {
|
|
PrintAndLogEx(WARNING, "timeout while waiting for reply");
|
|
}
|
|
}
|
|
|
|
if (keep_field_on == false)
|
|
DropField();
|
|
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* Commandline handling: HF15 CMD READMULTI
|
|
* Read multiple blocks at once (not all tags support this)
|
|
*/
|
|
static int CmdHF15Readmulti(const char *Cmd) {
|
|
|
|
char cmdp = tolower(param_getchar(Cmd, 0));
|
|
if (strlen(Cmd) < 3 || cmdp == 'h') return usage_15_readmulti();
|
|
|
|
uint8_t req[PM3_CMD_DATA_SIZE] = {0};
|
|
uint16_t reqlen = 0;
|
|
uint8_t fast = 1;
|
|
uint8_t reply = 1;
|
|
|
|
char cmdbuf[100] = {0};
|
|
char *cmd = cmdbuf;
|
|
strncpy(cmd, Cmd, sizeof(cmdbuf) - 1);
|
|
|
|
if (!prepareHF15Cmd(&cmd, &reqlen, &fast, req, ISO15_CMD_READMULTI))
|
|
return PM3_SUCCESS;
|
|
|
|
// add OPTION flag, in order to get lock-info
|
|
req[0] |= ISO15_REQ_OPTION;
|
|
|
|
// decimal
|
|
uint8_t pagenum = param_get8ex(cmd, 0, 0, 10);
|
|
uint8_t pagecount = param_get8ex(cmd, 1, 0, 10);
|
|
|
|
if (pagecount > 6) {
|
|
PrintAndLogEx(WARNING, "Page count must be 6 or less (%d)", pagecount);
|
|
return PM3_EINVARG;
|
|
}
|
|
|
|
// 0 means 1 page,
|
|
// 1 means 2 pages, ...
|
|
if (pagecount > 0) pagecount--;
|
|
|
|
req[reqlen++] = pagenum;
|
|
req[reqlen++] = pagecount;
|
|
AddCrc15(req, reqlen);
|
|
reqlen += 2;
|
|
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, reqlen, fast, reply, req, reqlen);
|
|
|
|
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
PrintAndLogEx(FAILED, "iso15693 card timeout");
|
|
DropField();
|
|
return PM3_ETIMEOUT;
|
|
}
|
|
|
|
DropField();
|
|
|
|
int status = resp.oldarg[0];
|
|
if (status == PM3_ETEAROFF) {
|
|
return status;
|
|
}
|
|
|
|
if (status < 2) {
|
|
PrintAndLogEx(FAILED, "iso15693 card readmulti failed");
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
uint8_t *data = resp.data.asBytes;
|
|
|
|
if (CheckCrc15(data, status) == false) {
|
|
PrintAndLogEx(FAILED, "crc (" _RED_("fail") ")");
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
if ((data[0] & ISO15_RES_ERROR) == ISO15_RES_ERROR) {
|
|
PrintAndLogEx(FAILED, "iso15693 card returned error %i: %s", data[0], TagErrorStr(data[0]));
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
// skip status byte
|
|
int start = 1;
|
|
int stop = (pagecount + 1) * 5;
|
|
int currblock = pagenum;
|
|
|
|
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(NORMAL, "block# | data |lck| ascii");
|
|
PrintAndLogEx(NORMAL, "---------+--------------+---+----------");
|
|
|
|
for (int i = start; i < stop; i += 5) {
|
|
PrintAndLogEx(NORMAL, "%3d/0x%02X | %s | %d | %s", currblock, currblock, sprint_hex(data + i + 1, 4), data[i], sprint_ascii(data + i + 1, 4));
|
|
currblock++;
|
|
}
|
|
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* Commandline handling: HF15 CMD READ
|
|
* Reads a single Block
|
|
*/
|
|
static int CmdHF15Read(const char *Cmd) {
|
|
|
|
char cmdp = tolower(param_getchar(Cmd, 0));
|
|
if (strlen(Cmd) < 3 || cmdp == 'h') return usage_15_read();
|
|
|
|
// arg: len, speed, recv?
|
|
// arg0 (datalen, cmd len? .arg0 == crc?)
|
|
// arg1 (speed == 0 == 1 of 256, == 1 == 1 of 4 )
|
|
// arg2 (recv == 1 == expect a response)
|
|
uint8_t req[PM3_CMD_DATA_SIZE] = {0};
|
|
uint16_t reqlen = 0;
|
|
uint8_t fast = 1;
|
|
uint8_t reply = 1;
|
|
int blocknum;
|
|
char cmdbuf[100] = {0};
|
|
char *cmd = cmdbuf;
|
|
strncpy(cmd, Cmd, sizeof(cmdbuf) - 1);
|
|
|
|
if (prepareHF15Cmd(&cmd, &reqlen, &fast, req, ISO15_CMD_READ) == false)
|
|
return PM3_SUCCESS;
|
|
|
|
// add OPTION flag, in order to get lock-info
|
|
req[0] |= ISO15_REQ_OPTION;
|
|
|
|
blocknum = strtol(cmd, NULL, 0);
|
|
|
|
req[reqlen++] = (uint8_t)blocknum;
|
|
|
|
AddCrc15(req, reqlen);
|
|
reqlen += 2;
|
|
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, reqlen, fast, reply, req, reqlen);
|
|
|
|
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
PrintAndLogEx(ERR, "iso15693 timeout");
|
|
DropField();
|
|
return PM3_ETIMEOUT;
|
|
}
|
|
|
|
DropField();
|
|
|
|
int status = resp.oldarg[0];
|
|
if (status == PM3_ETEAROFF) {
|
|
return status;
|
|
}
|
|
if (status < 2) {
|
|
PrintAndLogEx(ERR, "iso15693 command failed");
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
uint8_t *data = resp.data.asBytes;
|
|
|
|
if (CheckCrc15(data, status) == false) {
|
|
PrintAndLogEx(FAILED, "crc (" _RED_("fail") ")");
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
if ((data[0] & ISO15_RES_ERROR) == ISO15_RES_ERROR) {
|
|
PrintAndLogEx(ERR, "iso15693 card returned error %i: %s", data[0], TagErrorStr(data[0]));
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
// print response
|
|
PrintAndLogEx(NORMAL, "");
|
|
PrintAndLogEx(NORMAL, "block #%3d |lck| ascii", blocknum);
|
|
PrintAndLogEx(NORMAL, "------------+---+------");
|
|
PrintAndLogEx(NORMAL, "%s| %d | %s", sprint_hex(data + 2, status - 4), data[1], sprint_ascii(data + 2, status - 4));
|
|
PrintAndLogEx(NORMAL, "");
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* Commandline handling: HF15 CMD WRITE
|
|
* Writes a single Block - might run into timeout, even when successful
|
|
*/
|
|
static int CmdHF15Write(const char *Cmd) {
|
|
|
|
char cmdp = tolower(param_getchar(Cmd, 0));
|
|
if (strlen(Cmd) < 3 || cmdp == 'h') return usage_15_write();
|
|
|
|
uint8_t req[PM3_CMD_DATA_SIZE] = {0};
|
|
uint16_t reqlen = 0;
|
|
uint8_t fast = 1;
|
|
uint8_t reply = 1;
|
|
int pagenum, temp;
|
|
|
|
char cmdbuf[100] = {0};
|
|
char *cmd = cmdbuf;
|
|
char *cmd2;
|
|
|
|
strncpy(cmd, Cmd, sizeof(cmdbuf) - 1);
|
|
|
|
if (prepareHF15Cmd(&cmd, &reqlen, &fast, req, ISO15_CMD_WRITE) == false)
|
|
return PM3_SUCCESS;
|
|
|
|
// *cmd -> page num ; *cmd2 -> data
|
|
cmd2 = cmd;
|
|
while (*cmd2 != ' ' && *cmd2 != '\t' && *cmd2) cmd2++;
|
|
*cmd2 = 0;
|
|
cmd2++;
|
|
|
|
pagenum = strtol(cmd, NULL, 0);
|
|
|
|
req[reqlen++] = (uint8_t)pagenum;
|
|
|
|
while (cmd2[0] && cmd2[1]) { // hexdata, read by 2 hexchars
|
|
if (*cmd2 == ' ') {
|
|
cmd2++;
|
|
continue;
|
|
}
|
|
sscanf((char[]) {cmd2[0], cmd2[1], 0}, "%X", &temp);
|
|
req[reqlen++] = temp & 0xff;
|
|
cmd2 += 2;
|
|
}
|
|
AddCrc15(req, reqlen);
|
|
reqlen += 2;
|
|
|
|
PrintAndLogEx(INFO, "iso15693 writing to page %02d (0x%02X) | data ", pagenum, pagenum);
|
|
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandMIX(CMD_HF_ISO15693_COMMAND, reqlen, fast, reply, req, reqlen);
|
|
|
|
if (!WaitForResponseTimeout(CMD_ACK, &resp, 2000)) {
|
|
PrintAndLogEx(FAILED, "iso15693 card timeout, data may be written anyway");
|
|
DropField();
|
|
return PM3_ETIMEOUT;
|
|
}
|
|
|
|
DropField();
|
|
|
|
int status = resp.oldarg[0];
|
|
if (status == PM3_ETEAROFF) {
|
|
return status;
|
|
}
|
|
|
|
if (status < 2) {
|
|
PrintAndLogEx(FAILED, "iso15693 command failed");
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
uint8_t *data = resp.data.asBytes;
|
|
|
|
if (CheckCrc15(data, status) == false) {
|
|
PrintAndLogEx(FAILED, "crc (" _RED_("fail") ")");
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
if ((data[0] & ISO15_RES_ERROR) == ISO15_RES_ERROR) {
|
|
PrintAndLogEx(ERR, "iso15693 card returned error %i: %s", data[0], TagErrorStr(data[0]));
|
|
return PM3_EWRONGANSWER;
|
|
}
|
|
|
|
PrintAndLogEx(SUCCESS, "Write " _GREEN_("OK"));
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
static int CmdHF15Restore(const char *Cmd) {
|
|
|
|
char newPrefix[60] = {0x00};
|
|
char filename[FILE_PATH_SIZE] = {0x00};
|
|
size_t blocksize = 4;
|
|
uint8_t cmdp = 0, retries = 3;
|
|
bool addressed_mode = false;
|
|
|
|
while (param_getchar(Cmd, cmdp) != 0x00) {
|
|
switch (tolower(param_getchar(Cmd, cmdp))) {
|
|
case '-': {
|
|
char param[3] = "";
|
|
param_getstr(Cmd, cmdp, param, sizeof(param));
|
|
switch (param[1]) {
|
|
case '2':
|
|
case 'o':
|
|
sprintf(newPrefix, " %s", param);
|
|
break;
|
|
default:
|
|
PrintAndLogEx(WARNING, "11 unknown parameter " _YELLOW_("'%s'"), param);
|
|
return usage_15_restore();
|
|
}
|
|
break;
|
|
}
|
|
case 'f':
|
|
param_getstr(Cmd, cmdp + 1, filename, FILE_PATH_SIZE);
|
|
cmdp++;
|
|
break;
|
|
case 'r':
|
|
retries = param_get8ex(Cmd, cmdp + 1, 3, 10);
|
|
cmdp++;
|
|
break;
|
|
case 'b':
|
|
blocksize = param_get8ex(Cmd, cmdp + 1, 4, 10);
|
|
cmdp++;
|
|
break;
|
|
case 'a':
|
|
addressed_mode = true;
|
|
break;
|
|
case 'h':
|
|
return usage_15_restore();
|
|
default:
|
|
PrintAndLogEx(WARNING, "unknown parameter " _YELLOW_("'%c'"), param_getchar(Cmd, cmdp));
|
|
return usage_15_restore();
|
|
}
|
|
cmdp++;
|
|
}
|
|
|
|
PrintAndLogEx(INFO, "blocksize: %zu", blocksize);
|
|
|
|
if (!strlen(filename)) {
|
|
PrintAndLogEx(WARNING, "please provide a filename");
|
|
return usage_15_restore();
|
|
}
|
|
|
|
uint8_t uid[8] = {0x00};
|
|
if (getUID(false, uid) == false) {
|
|
PrintAndLogEx(WARNING, "no tag found");
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
size_t datalen = 0;
|
|
uint8_t *data = NULL;
|
|
if (loadFile_safe(filename, ".bin", (void **)&data, &datalen) != PM3_SUCCESS) {
|
|
PrintAndLogEx(WARNING, "could not find file " _YELLOW_("%s"), filename);
|
|
return PM3_EFILE;
|
|
}
|
|
|
|
if ((datalen % blocksize) != 0) {
|
|
PrintAndLogEx(WARNING, "datalen %zu isn't dividable with blocksize %zu", datalen, blocksize);
|
|
free(data);
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
PrintAndLogEx(INFO, "restoring data blocks");
|
|
|
|
int retval = PM3_SUCCESS;
|
|
size_t bytes = 0;
|
|
uint16_t i = 0;
|
|
while (bytes < datalen) {
|
|
|
|
uint8_t tried = 0;
|
|
char hex[40] = {0x00};
|
|
char tmpCmd[200] = {0x00};
|
|
|
|
if (addressed_mode) {
|
|
char uidhex[17] = {0x00};
|
|
hex_to_buffer((uint8_t *)uidhex, uid, sizeof(uid), sizeof(uidhex) - 1, 0, false, true);
|
|
hex_to_buffer((uint8_t *)hex, data + i, blocksize, sizeof(hex) - 1, 0, false, true);
|
|
snprintf(tmpCmd, sizeof(tmpCmd), "%s %s %u %s", newPrefix, uidhex, i, hex);
|
|
} else {
|
|
hex_to_buffer((uint8_t *)hex, data + i, blocksize, sizeof(hex) - 1, 0, false, true);
|
|
snprintf(tmpCmd, sizeof(tmpCmd), "%s u %u %s", newPrefix, i, hex);
|
|
}
|
|
|
|
PrintAndLogEx(DEBUG, "hf 15 write %s", tmpCmd);
|
|
|
|
for (tried = 0; tried < retries; tried++) {
|
|
retval = CmdHF15Write(tmpCmd);
|
|
if (retval == false) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (tried >= retries) {
|
|
free(data);
|
|
PrintAndLogEx(FAILED, "restore failed. Too many retries.");
|
|
return retval;
|
|
}
|
|
bytes += blocksize;
|
|
i++;
|
|
}
|
|
free(data);
|
|
PrintAndLogEx(INFO, "done");
|
|
PrintAndLogEx(HINT, "try `" _YELLOW_("hf 15 dump") "` to read your card to verify");
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
* Commandline handling: HF15 CMD CSETUID
|
|
* Set UID for magic Chinese card
|
|
*/
|
|
static int CmdHF15CSetUID(const char *Cmd) {
|
|
|
|
CLIParserContext *ctx;
|
|
CLIParserInit(&ctx, "hf 15 csetuid",
|
|
"Set UID for magic Chinese card (only works with such cards)\n",
|
|
"hf 15 csetuid -u E011223344556677");
|
|
|
|
void *argtable[] = {
|
|
arg_param_begin,
|
|
arg_str1("u", "uid", "<8b hex>", "UID eg E011223344556677"),
|
|
arg_param_end
|
|
};
|
|
CLIExecWithReturn(ctx, Cmd, argtable, false);
|
|
|
|
struct {
|
|
uint8_t uid[8];
|
|
} PACKED payload;
|
|
|
|
int uidlen = 0;
|
|
CLIGetHexWithReturn(ctx, 1, payload.uid, &uidlen);
|
|
CLIParserFree(ctx);
|
|
|
|
if (uidlen != 8) {
|
|
PrintAndLogEx(WARNING, "UID must include 16 HEX symbols got ");
|
|
return PM3_EINVARG;
|
|
}
|
|
|
|
if (payload.uid[0] != 0xE0) {
|
|
PrintAndLogEx(WARNING, "UID must begin with the byte " _YELLOW_("E0"));
|
|
return PM3_EINVARG;
|
|
}
|
|
|
|
PrintAndLogEx(SUCCESS, "reverse input UID " _YELLOW_("%s"), iso15693_sprintUID(NULL, payload.uid));
|
|
|
|
PrintAndLogEx(INFO, "getting current card details...");
|
|
uint8_t carduid[8] = {0x00};
|
|
if (getUID(false, carduid) == false) {
|
|
PrintAndLogEx(FAILED, "can't read card UID");
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
PrintAndLogEx(INFO, "updating tag uid...");
|
|
|
|
PacketResponseNG resp;
|
|
clearCommandBuffer();
|
|
SendCommandNG(CMD_HF_ISO15693_CSETUID, (uint8_t *)&payload, sizeof(payload));
|
|
if (WaitForResponseTimeout(CMD_HF_ISO15693_CSETUID, &resp, 2000) == false) {
|
|
PrintAndLogEx(WARNING, "timeout while waiting for reply");
|
|
DropField();
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
PrintAndLogEx(INFO, "getting updated card details...");
|
|
|
|
if (getUID(false, carduid) == false) {
|
|
PrintAndLogEx(FAILED, "can't read card UID");
|
|
return PM3_ESOFT;
|
|
}
|
|
|
|
// reverse cardUID to compare
|
|
uint8_t revuid[8] = {0};
|
|
uint8_t i = 0;
|
|
while (i < sizeof(revuid)) {
|
|
revuid[i] = carduid[7 - i];
|
|
i++;
|
|
}
|
|
|
|
if (memcmp(revuid, payload.uid, 8) != 0) {
|
|
PrintAndLogEx(FAILED, "setting new UID (" _RED_("failed") ")");
|
|
return PM3_ESOFT;
|
|
} else {
|
|
PrintAndLogEx(SUCCESS, "setting new UID (" _GREEN_("ok") ")");
|
|
return PM3_SUCCESS;
|
|
}
|
|
}
|
|
|
|
static command_t CommandTable[] = {
|
|
{"-----------", CmdHF15Help, AlwaysAvailable, "--------------------- " _CYAN_("General") " ---------------------"},
|
|
{"help", CmdHF15Help, AlwaysAvailable, "This help"},
|
|
{"list", CmdHF15List, AlwaysAvailable, "List ISO15693 history"},
|
|
{"demod", CmdHF15Demod, AlwaysAvailable, "Demodulate ISO15693 from tag"},
|
|
{"dump", CmdHF15Dump, IfPm3Iso15693, "Read all memory pages of an ISO15693 tag, save to file"},
|
|
{"info", CmdHF15Info, IfPm3Iso15693, "Tag information"},
|
|
{"sniff", CmdHF15Sniff, IfPm3Iso15693, "Sniff ISO15693 traffic"},
|
|
{"raw", CmdHF15Raw, IfPm3Iso15693, "Send raw hex data to tag"},
|
|
{"rdbl", CmdHF15Read, IfPm3Iso15693, "Read a block"},
|
|
{"reader", CmdHF15Reader, IfPm3Iso15693, "Act like an ISO15693 reader"},
|
|
{"readmulti", CmdHF15Readmulti, IfPm3Iso15693, "Reads multiple Blocks"},
|
|
{"restore", CmdHF15Restore, IfPm3Iso15693, "Restore from file to all memory pages of an ISO15693 tag"},
|
|
{"samples", CmdHF15Samples, IfPm3Iso15693, "Acquire Samples as Reader (enables carrier, sends inquiry)"},
|
|
{"sim", CmdHF15Sim, IfPm3Iso15693, "Fake an ISO15693 tag"},
|
|
{"wrbl", CmdHF15Write, IfPm3Iso15693, "Write a block"},
|
|
{"-----------", CmdHF15Help, IfPm3Iso15693, "----------------------- " _CYAN_("afi") " -----------------------"},
|
|
{"findafi", CmdHF15FindAfi, IfPm3Iso15693, "Brute force AFI of an ISO15693 tag"},
|
|
{"writeafi", CmdHF15WriteAfi, IfPm3Iso15693, "Writes the AFI on an ISO15693 tag"},
|
|
{"writedsfid", CmdHF15WriteDsfid, IfPm3Iso15693, "Writes the DSFID on an ISO15693 tag"},
|
|
{"-----------", CmdHF15Help, IfPm3Iso15693, "----------------------- " _CYAN_("magic") " -----------------------"},
|
|
{"csetuid", CmdHF15CSetUID, IfPm3Iso15693, "Set UID for magic Chinese card"},
|
|
{NULL, NULL, NULL, NULL}
|
|
};
|
|
|
|
static int CmdHF15Help(const char *Cmd) {
|
|
(void)Cmd; // Cmd is not used so far
|
|
CmdsHelp(CommandTable);
|
|
return PM3_SUCCESS;
|
|
}
|
|
|
|
int CmdHF15(const char *Cmd) {
|
|
clearCommandBuffer();
|
|
return CmdsParse(CommandTable, Cmd);
|
|
}
|