mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-16 06:43:29 +08:00
330 lines
12 KiB
Lua
330 lines
12 KiB
Lua
local getopt = require('getopt')
|
|
local ansicolors = require('ansicolors')
|
|
|
|
copyright = 'Iceman'
|
|
author = [[
|
|
'Author Iceman
|
|
CoAuthor Doegox
|
|
]]
|
|
version = 'v1.0.2'
|
|
desc = [[
|
|
This is scripts loops though a tear attack and reads expected value.
|
|
]]
|
|
example = [[
|
|
Full automatic, with password:
|
|
script run lf_em_tearoff_protect -p 50524F58
|
|
|
|
Manual fix increment over specified range:
|
|
script run lf_em_tearoff_protect -n 2 -s 200 -e 400
|
|
|
|
Trying repeatedly for a fixed timing, forever or till success:
|
|
script run lf_em_tearoff_protect -s 400 -e 400
|
|
|
|
Tips:
|
|
Use a low Q antenna
|
|
Move card somehow away from the antenna to a position where it still works
|
|
]]
|
|
usage = [[
|
|
script run lf_em_tearoff_protect [-h] [-n <steps us>] [-p <pwd>] [-s <start us>] [-e <end us>]
|
|
]]
|
|
arguments = [[
|
|
-h This help
|
|
-n <steps us> steps in milliseconds for each tear-off
|
|
-p <pwd> (optional) use a password
|
|
-s <delay us> initial start delay
|
|
-e <delay us> end delay, must be larger or equal to start delay
|
|
end
|
|
]]
|
|
|
|
local set_tearoff_delay = 'hw tearoff --on --delay %d'
|
|
local wr_template = 'lf em 4x05 write --po -d %s -p %s'
|
|
|
|
---
|
|
-- This is only meant to be used when errors occur
|
|
local function oops(err)
|
|
print('ERROR:', err)
|
|
core.clearCommandBuffer()
|
|
return nil, err
|
|
end
|
|
---
|
|
-- Usage help
|
|
local function help()
|
|
print(copyright)
|
|
print(author)
|
|
print(version)
|
|
print(desc)
|
|
print(ansicolors.cyan..'Usage'..ansicolors.reset)
|
|
print(usage)
|
|
print(ansicolors.cyan..'Arguments'..ansicolors.reset)
|
|
print(arguments)
|
|
print(ansicolors.cyan..'Example usage'..ansicolors.reset)
|
|
print(example)
|
|
end
|
|
|
|
local function exit_msg()
|
|
print('')
|
|
print('================= '..ansicolors.green..'verify with'..ansicolors.reset..' =================')
|
|
print(' lf em 4x05_dump')
|
|
print('===============================================')
|
|
return nil
|
|
end
|
|
|
|
local function reset(wr_value, password)
|
|
print('[=] '..ansicolors.red..'resetting the active lock block'..ansicolors.reset)
|
|
core.console(wr_template:format(wr_value, password))
|
|
end
|
|
|
|
local function main(args)
|
|
|
|
--[[
|
|
Basically it does the following,
|
|
|
|
1. hw tear
|
|
2. lf em 4x05_write
|
|
3. lf em 4x05_read
|
|
|
|
The first two commands don't need a feedback from the system, so going with core.console commands.
|
|
Since the read needs demodulation of signal I opted to add that function from cmdlfem4x.c to the core lua scripting
|
|
core.em4x05_read(addr, password)
|
|
|
|
--]]
|
|
local n, password, sd, ed
|
|
|
|
for o, a in getopt.getopt(args, 'he:s:p:n:') do
|
|
if o == 'h' then return help() end
|
|
if o == 'n' then n = tonumber(a) end
|
|
if o == 'p' then password = a end
|
|
if o == 'e' then ed = tonumber(a) end
|
|
if o == 's' then sd = tonumber(a) end
|
|
end
|
|
|
|
password = password or ''
|
|
if #password ~= 8 then
|
|
password = ''
|
|
end
|
|
|
|
local word14, err14 = core.em4x05_read(14, password)
|
|
if err14 then
|
|
return oops(err14)
|
|
end
|
|
local word15, err15 = core.em4x05_read(15, password)
|
|
if err15 then
|
|
return oops(err15)
|
|
end
|
|
local bit15 = bit.band(0x00008000, word15)
|
|
if bit15 == 0x00008000 then
|
|
rd_value = ('%08X'):format(word15)
|
|
reset(wr_value, password)
|
|
else
|
|
rd_value = ('%08X'):format(word14)
|
|
end
|
|
if rd_value == '00008000' then
|
|
print('Tag already fully unlocked, nothing to do')
|
|
return nil
|
|
end
|
|
local wr_value = '00000000'
|
|
local auto = false
|
|
if n == nil then
|
|
auto = true
|
|
sd = sd or 2000
|
|
ed = ed or 6000
|
|
n = (ed - sd) / 2
|
|
else
|
|
if sd == nil or ed == nil then
|
|
return oops('start and stop delays need to be defined')
|
|
end
|
|
if sd > ed then
|
|
return oops('start delay can\'t be larger than end delay', sd, ed)
|
|
end
|
|
end
|
|
|
|
print('==========================================')
|
|
print('Starting EM4x05 tear-off : target PROTECT')
|
|
|
|
if password ~= '' then
|
|
print('target pwd', password)
|
|
end
|
|
if auto then
|
|
print('automatic mode', 'enabled')
|
|
end
|
|
print('target stepping', n)
|
|
print('target delay', sd ,ed)
|
|
print('read value', rd_value)
|
|
print('write value', wr_value)
|
|
print('==========================================')
|
|
|
|
local res_tear = 0
|
|
local res_nowrite = 0
|
|
|
|
-- fix at one specific delay
|
|
if sd == ed then
|
|
n = 0
|
|
end
|
|
|
|
local tries = 0
|
|
local soon = 0
|
|
local late = 0
|
|
while sd <= ed do
|
|
|
|
if auto and n < 1 then -- n is a float
|
|
print('[!] Reached n < 1 => '..ansicolors.yellow..'disabling automatic mode'..ansicolors.reset)
|
|
ed = sd
|
|
auto = false
|
|
n = 0
|
|
end
|
|
if not auto then
|
|
sd = sd + n
|
|
end
|
|
if (tries >= 5) and (n == 0) and (soon ~= late) then
|
|
if soon > late then
|
|
print(('[!] Tried %d times, soon:%i late:%i => '):format(tries, soon, late)..ansicolors.yellow..'adjusting delay by +1 us'..ansicolors.reset)
|
|
sd = sd + 1
|
|
ed = ed + 1
|
|
else
|
|
print(('[!] Tried %d times, soon:%i late:%i => '):format(tries, soon, late)..ansicolors.yellow..'adjusting delay by -1 us'..ansicolors.reset)
|
|
sd = sd - 1
|
|
ed = ed - 1
|
|
end
|
|
tries = 0
|
|
soon = 0
|
|
late = 0
|
|
end
|
|
|
|
io.flush()
|
|
if core.kbd_enter_pressed() then
|
|
print("aborted by user")
|
|
break
|
|
end
|
|
|
|
core.clearCommandBuffer()
|
|
|
|
local c = set_tearoff_delay:format(sd)
|
|
core.console(c);
|
|
|
|
c = wr_template:format(wr_value, password)
|
|
core.console(c)
|
|
|
|
word14, err14 = core.em4x05_read(14, password)
|
|
if err14 then
|
|
return oops(err14)
|
|
end
|
|
|
|
local wordstr14 = ('%08X'):format(word14)
|
|
|
|
word15, err15 = core.em4x05_read(15, password)
|
|
if err15 then
|
|
return oops(err15)
|
|
end
|
|
|
|
local wordstr15 = ('%08X'):format(word15)
|
|
|
|
print(('[=] ref:'..rd_value..' 14:%08X 15:%08X '):format(word14, word15))
|
|
|
|
|
|
if wordstr14 == rd_value and wordstr15 == '00000000' then
|
|
print('[=] Status: Nothing happened => '..ansicolors.green..'tearing too soon'..ansicolors.reset)
|
|
if auto then
|
|
sd = sd + n
|
|
n = n / 2
|
|
print(('[+] Adjusting params: n=%i sd=%i ed=%i'):format(n, sd, ed))
|
|
else
|
|
soon = soon + 1
|
|
end
|
|
else
|
|
if wordstr15 == rd_value then
|
|
if wordstr14 == '00000000' then
|
|
print('[=] Status: Protect succeeded => '..ansicolors.green..'tearing too late'..ansicolors.reset)
|
|
else
|
|
if wordstr14 == rd_value then
|
|
print('[=] Status: 15 ok, 14 not yet erased => '..ansicolors.green..'tearing too late'..ansicolors.reset)
|
|
else
|
|
print('[=] Status: 15 ok, 14 partially erased => '..ansicolors.green..'tearing too late'..ansicolors.reset)
|
|
end
|
|
end
|
|
reset(wr_value, password)
|
|
-- it could still happen that a bitflip got committed, let's check...
|
|
local word14b, err14b = core.em4x05_read(14, password)
|
|
if err14b then
|
|
return oops(err14b)
|
|
end
|
|
local wordstr14b = ('%08X'):format(word14b)
|
|
if (wordstr14b == '00000000') then
|
|
reset(wr_value, password)
|
|
word14b, err14b = core.em4x05_read(14, password)
|
|
if err14b then
|
|
return oops(err14b)
|
|
end
|
|
end
|
|
if (wordstr14b ~= rd_value) then
|
|
local word15b, err15b = core.em4x05_read(15, password)
|
|
if err15b then
|
|
return oops(err15b)
|
|
end
|
|
print(('[=] Status: new definitive value! => '..ansicolors.red..'SUCCESS: '..ansicolors.reset..'14: '..ansicolors.cyan..'%08X'..ansicolors.reset..' 15: %08X'):format(word14b, word15b))
|
|
return exit_msg()
|
|
end
|
|
if auto then
|
|
ed = sd
|
|
sd = sd - n
|
|
n = n / 2
|
|
print(('[+] Adjusting params: n=%i sd=%i ed=%i'):format(n, sd, ed))
|
|
else
|
|
late = late + 1
|
|
end
|
|
else
|
|
bit15 = bit.band(0x00008000, word15)
|
|
if bit15 == 0x00008000 then
|
|
print(('[=] Status: 15 bitflipped and active => '..ansicolors.red..'SUCCESS?: '..ansicolors.reset..'14: %08X 15: '..ansicolors.cyan..'%08X'..ansicolors.reset):format(word14, word15))
|
|
print('[+] Committing results...')
|
|
reset(wr_value, password)
|
|
local word14b, err14b = core.em4x05_read(14, password)
|
|
if err14b then
|
|
return oops(err14b)
|
|
end
|
|
local wordstr14b = ('%08X'):format(word14b)
|
|
local word15b, err15b = core.em4x05_read(15, password)
|
|
if err15b then
|
|
return oops(err15b)
|
|
end
|
|
local wordstr15b = ('%08X'):format(word15b)
|
|
print(('[=] ref:'..rd_value..' 14:%08X 15:%08X '):format(word14b, word15b))
|
|
|
|
bit15 = bit.band(0x00008000, word14b)
|
|
if bit15 == 0x00008000 then
|
|
if (wordstr14b == wordstr15) then
|
|
print(('[=] Status: confirmed => '..ansicolors.red..'SUCCESS: '..ansicolors.reset..'14: '..ansicolors.cyan..'%08X'..ansicolors.reset..' 15: %08X'):format(word14b, word15b))
|
|
return exit_msg()
|
|
end
|
|
if (wordstr14b ~= rd_value) then
|
|
print(('[=] Status: new definitive value! => '..ansicolors.red..'SUCCESS: '..ansicolors.reset..'14: '..ansicolors.cyan..'%08X'..ansicolors.reset..' 15: %08X'):format(word14b, word15b))
|
|
return exit_msg()
|
|
end
|
|
print(('[=] Status: failed to commit bitflip => '..ansicolors.red..'FAIL: '..ansicolors.reset..'14: %08X 15: %08X'):format(word14b, word15b))
|
|
else
|
|
print(('[=] Status: failed to commit => '..ansicolors.red..'FAIL: '..ansicolors.reset..'14: %08X 15: %08X'):format(word14b, word15b))
|
|
end
|
|
if auto then
|
|
n = 0
|
|
ed = sd
|
|
else
|
|
tries = 0
|
|
soon = 0
|
|
late = 0
|
|
end
|
|
else
|
|
print(('[=] Status: 15 bitflipped but inactive => '..ansicolors.yellow..'PROMISING: '..ansicolors.reset..'14: %08X 15: '..ansicolors.cyan..'%08X'..ansicolors.reset):format(word14, word15))
|
|
end
|
|
end
|
|
end
|
|
if not auto then
|
|
tries = tries + 1
|
|
end
|
|
end
|
|
end
|
|
|
|
--[[
|
|
In the future, we may implement so that scripts are invoked directly
|
|
into a 'main' function, instead of being executed blindly. For future
|
|
compatibility, I have done so, but I invoke my main from here.
|
|
--]]
|
|
main(args)
|