mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-15 22:29:52 +08:00
dbfd8b7a6d
This adds a new command "hw sethfthresh" to configure the thresholds used inside the FPGA while demodulating ISO14443A. The thresholds need to be increased on particularly noisy hardware, such as certain Chinese PM3 Easy clones.
157 lines
7.5 KiB
Verilog
157 lines
7.5 KiB
Verilog
//-----------------------------------------------------------------------------
|
|
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
|
|
//
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
//
|
|
// See LICENSE.txt for the text of the license.
|
|
//-----------------------------------------------------------------------------
|
|
//
|
|
// The FPGA is responsible for interfacing between the A/D, the coil drivers,
|
|
// and the ARM. In the low-frequency modes it passes the data straight
|
|
// through, so that the ARM gets raw A/D samples over the SSP. In the high-
|
|
// frequency modes, the FPGA might perform some demodulation first, to
|
|
// reduce the amount of data that we must send to the ARM.
|
|
//-----------------------------------------------------------------------------
|
|
|
|
/*
|
|
Communication between ARM / FPGA is done inside armsrc/fpgaloader.c see: function FpgaSendCommand()
|
|
Send 16 bit command / data pair to FPGA with the bit format:
|
|
|
|
+------ frame layout circa 2020 ------------------+
|
|
| 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 |
|
|
+-------------------------------------------------+
|
|
| C C C C M M M M P P P P P P P P | C = FPGA_CMD_SET_CONFREG, M = FPGA_MAJOR_MODE_*, P = FPGA_LF_* or FPGA_HF_* parameter
|
|
| C C C C D D D D D D D D | C = FPGA_CMD_SET_DIVISOR, D = divisor
|
|
| C C C C T T T T T T T T | C = FPGA_CMD_SET_EDGE_DETECT_THRESHOLD, T = threshold
|
|
| C C C C E | C = FPGA_CMD_TRACE_ENABLE, E=0 off, E=1 on
|
|
+-------------------------------------------------+
|
|
|
|
+------ frame layout current ---------------------+
|
|
| 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 |
|
|
+-------------------------------------------------+
|
|
| C C C C M M M P P P P P P | C = FPGA_CMD_SET_CONFREG, M = FPGA_MAJOR_MODE_*, P = FPGA_LF_* or FPGA_HF_* parameter
|
|
| C C C C D D D D D D D D | C = FPGA_CMD_SET_DIVISOR, D = divisor
|
|
| C C C C T T T T T T T T | C = FPGA_CMD_SET_EDGE_DETECT_THRESHOLD, T = threshold (in LF mode)
|
|
| C C C C H H H H H H T T T T T T | C = FPGA_CMD_SET_EDGE_DETECT_THRESHOLD, H = threshold_high, T = threshold (in HF/14a mode)
|
|
| C C C C E | C = FPGA_CMD_TRACE_ENABLE, E=0 off, E=1 on
|
|
+-------------------------------------------------+
|
|
|
|
shift_reg receive this 16bit frame
|
|
|
|
LF command
|
|
----------
|
|
shift_reg[15:12] == 4bit command
|
|
LF has three commands (FPGA_CMD_SET_CONFREG, FPGA_CMD_SET_DIVISOR, FPGA_CMD_SET_EDGE_DETECT_THRESHOLD)
|
|
Current commands uses only 2bits. We have room for up to 4bits of commands total (7).
|
|
|
|
LF data
|
|
-------
|
|
shift_reg[11:0] == 12bit data
|
|
lf data is divided into MAJOR MODES and configuration values.
|
|
|
|
The major modes uses 3bits (0,1,2,3,7 | 000, 001, 010, 011, 111)
|
|
000 FPGA_MAJOR_MODE_LF_READER = Act as LF reader (modulate)
|
|
001 FPGA_MAJOR_MODE_LF_EDGE_DETECT = Simulate LF
|
|
010 FPGA_MAJOR_MODE_LF_PASSTHRU = Passthrough mode, CROSS_LO line connected to SSP_DIN. SSP_DOUT logic level controls if we modulate / listening
|
|
011 FPGA_MAJOR_MODE_LF_ADC = refactor hitag2, clear ADC sampling
|
|
111 FPGA_MAJOR_MODE_OFF = turn off sampling.
|
|
|
|
Each one of this major modes can have options. Currently these two major modes uses options.
|
|
- FPGA_MAJOR_MODE_LF_READER
|
|
- FPGA_MAJOR_MODE_LF_EDGE_DETECT
|
|
|
|
FPGA_MAJOR_MODE_LF_READER
|
|
-------------------------------------
|
|
lf_field = 1bit (FPGA_LF_ADC_READER_FIELD)
|
|
|
|
You can send FPGA_CMD_SET_DIVISOR to set with FREQUENCY the fpga should sample at
|
|
divisor = 8bits shift_reg[7:0]
|
|
|
|
FPGA_MAJOR_MODE_LF_EDGE_DETECT
|
|
------------------------------------------
|
|
lf_ed_toggle_mode = 1bits
|
|
lf_ed_threshold = 8bits threshold defaults to 127
|
|
|
|
You can send FPGA_CMD_SET_EDGE_DETECT_THRESHOLD to set a custom threshold
|
|
lf_ed_threshold = 8bits threshold value.
|
|
|
|
conf_word 12bits
|
|
conf_word[7:5] = 3bit major mode.
|
|
conf_word[0] = 1bit lf_field
|
|
conf_word[1] = 1bit lf_ed_toggle_mode
|
|
conf_word[7:0] = 8bit divisor
|
|
conf_word[7:0] = 8bit threshold
|
|
|
|
*/
|
|
// Defining commands, modes and options. This must be aligned to the definitions in armsrc/fpgaloader.h
|
|
// Note: the definitions here are without shifts
|
|
|
|
// Definitions for the FPGA commands.
|
|
`define FPGA_CMD_SET_CONFREG 1
|
|
`define FPGA_CMD_SET_DIVISOR 2
|
|
`define FPGA_CMD_SET_EDGE_DETECT_THRESHOLD 3
|
|
`define FPGA_CMD_TRACE_ENABLE 2
|
|
|
|
// Major modes
|
|
`define FPGA_MAJOR_MODE_LF_READER 0
|
|
`define FPGA_MAJOR_MODE_LF_EDGE_DETECT 1
|
|
`define FPGA_MAJOR_MODE_LF_PASSTHRU 2
|
|
`define FPGA_MAJOR_MODE_LF_ADC 3
|
|
`define FPGA_MAJOR_MODE_HF_READER 0
|
|
`define FPGA_MAJOR_MODE_HF_SIMULATOR 1
|
|
`define FPGA_MAJOR_MODE_HF_ISO14443A 2
|
|
`define FPGA_MAJOR_MODE_HF_SNIFF 3
|
|
`define FPGA_MAJOR_MODE_HF_ISO18092 4
|
|
`define FPGA_MAJOR_MODE_HF_GET_TRACE 5
|
|
`define FPGA_MAJOR_MODE_OFF 7
|
|
|
|
// Options for LF_READER
|
|
`define FPGA_LF_ADC_READER_FIELD 1
|
|
|
|
// Options for LF_EDGE_DETECT
|
|
`define FPGA_LF_EDGE_DETECT_READER_FIELD 1
|
|
`define FPGA_LF_EDGE_DETECT_TOGGLE_MODE 2
|
|
|
|
// Options for the generic HF reader
|
|
`define FPGA_HF_READER_MODE_RECEIVE_IQ 0
|
|
`define FPGA_HF_READER_MODE_RECEIVE_AMPLITUDE 1
|
|
`define FPGA_HF_READER_MODE_RECEIVE_PHASE 2
|
|
`define FPGA_HF_READER_MODE_SEND_FULL_MOD 3
|
|
`define FPGA_HF_READER_MODE_SEND_SHALLOW_MOD 4
|
|
`define FPGA_HF_READER_MODE_SNIFF_IQ 5
|
|
`define FPGA_HF_READER_MODE_SNIFF_AMPLITUDE 6
|
|
`define FPGA_HF_READER_MODE_SNIFF_PHASE 7
|
|
`define FPGA_HF_READER_MODE_SEND_JAM 8
|
|
`define FPGA_HF_READER_MODE_SEND_SHALLOW_MOD_RDV4 9
|
|
|
|
`define FPGA_HF_READER_SUBCARRIER_848_KHZ 0
|
|
`define FPGA_HF_READER_SUBCARRIER_424_KHZ 1
|
|
`define FPGA_HF_READER_SUBCARRIER_212_KHZ 2
|
|
`define FPGA_HF_READER_2SUBCARRIERS_424_484_KHZ 3
|
|
|
|
// Options for the HF simulated tag, how to modulate
|
|
`define FPGA_HF_SIMULATOR_NO_MODULATION 0
|
|
`define FPGA_HF_SIMULATOR_MODULATE_BPSK 1
|
|
`define FPGA_HF_SIMULATOR_MODULATE_212K 2
|
|
`define FPGA_HF_SIMULATOR_MODULATE_424K 4
|
|
`define FPGA_HF_SIMULATOR_MODULATE_424K_8BIT 5
|
|
|
|
// Options for ISO14443A
|
|
`define FPGA_HF_ISO14443A_SNIFFER 0
|
|
`define FPGA_HF_ISO14443A_TAGSIM_LISTEN 1
|
|
`define FPGA_HF_ISO14443A_TAGSIM_MOD 2
|
|
`define FPGA_HF_ISO14443A_READER_LISTEN 3
|
|
`define FPGA_HF_ISO14443A_READER_MOD 4
|
|
|
|
// Options for ISO18092 / Felica
|
|
`define FPGA_HF_ISO18092_FLAG_NOMOD 1 // 0001 disable modulation module
|
|
`define FPGA_HF_ISO18092_FLAG_424K 2 // 0010 should enable 414k mode (untested). No autodetect
|
|
`define FPGA_HF_ISO18092_FLAG_READER 4 // 0100 enables antenna power, to act as a reader instead of tag
|