mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-11 18:33:18 +08:00
3b2fee43ea
This is a new LF edge detection algorithm for the FPGA. - It uses a low-pass IIR filter to clean the signal (see https://fail0verflow.com/blog/2014/proxmark3-fpga-iir-filter.html) - The algorithm is able to detect consecutive peaks in the same direction - It uses an envelope follower to dynamically adjust the peak thresholds - The main threshold used in the envelope follower can be set from the ARM side fpga/lf_edge_detect.v, fpga/lp20khz_1MSa_iir_filter.v, fpga/min_max_tracker.v: New file. fpga/lo_edge_detect.v, fpga/fpga_lf.v: Modify accordingly. armsrc/apps.h (FPGA_CMD_SET_USER_BYTE1, FPGA_CMD_SET_EDGE_DETECT_THRESHOLD): New FPGA command. fpga/fpga_lf.v: Modify accordingly/Add a 8bit user register. fpga/fpga_lf.bit: Update accordingly. fpga/tests: New directory for testbenches fpga/tests/Makefile: New file. It compiles the testbenches and runs all the tests by default (comparing with the golden output) fpga/tests/tb_lp20khz_1MSa_iir_filter.v, fpga/tests/tb_min_max_tracker.v, fpga/tests/tb_lf_edge_detect.v: New testbenches fpga/tests/plot_edgedetect.py: New script to plot the results from the edge detection tests. fpga/tests/tb_data: New directory for data and golden outputs
66 lines
2.2 KiB
Verilog
66 lines
2.2 KiB
Verilog
//-----------------------------------------------------------------------------
|
|
// Copyright (C) 2014 iZsh <izsh at fail0verflow.com>
|
|
//
|
|
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
|
|
// at your option, any later version. See the LICENSE.txt file for the text of
|
|
// the license.
|
|
//-----------------------------------------------------------------------------
|
|
//
|
|
// There are two modes:
|
|
// - lf_ed_toggle_mode == 0: the output is set low (resp. high) when a low
|
|
// (resp. high) edge/peak is detected, with hysteresis
|
|
// - lf_ed_toggle_mode == 1: the output is toggling whenever an edge/peak
|
|
// is detected.
|
|
// That way you can detect two consecutive edges/peaks at the same level (L/H)
|
|
//
|
|
// Output:
|
|
// - ssp_frame (wired to TIOA1 on the arm) for the edge detection/state
|
|
// - ssp_clk: cross_lo
|
|
`include "lp20khz_1MSa_iir_filter.v"
|
|
`include "lf_edge_detect.v"
|
|
|
|
module lo_edge_detect(
|
|
input pck0, input pck_divclk,
|
|
output pwr_lo, output pwr_hi,
|
|
output pwr_oe1, output pwr_oe2, output pwr_oe3, output pwr_oe4,
|
|
input [7:0] adc_d, output adc_clk,
|
|
output ssp_frame, input ssp_dout, output ssp_clk,
|
|
input cross_lo,
|
|
output dbg,
|
|
input lf_field,
|
|
input lf_ed_toggle_mode, input [7:0] lf_ed_threshold
|
|
);
|
|
|
|
wire tag_modulation = ssp_dout & !lf_field;
|
|
wire reader_modulation = !ssp_dout & lf_field & pck_divclk;
|
|
|
|
// No logic, straight through.
|
|
assign pwr_oe1 = 1'b0; // not used in LF mode
|
|
assign pwr_oe2 = tag_modulation;
|
|
assign pwr_oe3 = tag_modulation;
|
|
assign pwr_oe4 = tag_modulation;
|
|
assign ssp_clk = cross_lo;
|
|
assign pwr_lo = reader_modulation;
|
|
assign pwr_hi = 1'b0;
|
|
|
|
// filter the ADC values
|
|
wire data_rdy;
|
|
wire [7:0] adc_filtered;
|
|
assign adc_clk = pck0;
|
|
lp20khz_1MSa_iir_filter adc_filter(pck0, adc_d, data_rdy, adc_filtered);
|
|
|
|
// detect edges
|
|
wire [7:0] high_threshold, highz_threshold, lowz_threshold, low_threshold;
|
|
wire [7:0] max, min;
|
|
wire edge_state, edge_toggle;
|
|
lf_edge_detect lf_ed(pck0, adc_filtered, lf_ed_threshold,
|
|
max, min,
|
|
high_threshold, highz_threshold, lowz_threshold, low_threshold,
|
|
edge_state, edge_toggle);
|
|
|
|
assign dbg = lf_ed_toggle_mode ? edge_toggle : edge_state;
|
|
|
|
assign ssp_frame = lf_ed_toggle_mode ? edge_toggle : edge_state;
|
|
|
|
endmodule
|
|
|