mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-16 06:43:29 +08:00
104 lines
3 KiB
Verilog
104 lines
3 KiB
Verilog
//-----------------------------------------------------------------------------
|
|
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
|
|
//
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
//
|
|
// See LICENSE.txt for the text of the license.
|
|
//-----------------------------------------------------------------------------
|
|
//
|
|
// The way that we connect things in low-frequency simulation mode. In this
|
|
// case just pass everything through to the ARM, which can bit-bang this
|
|
// (because it is so slow).
|
|
//
|
|
// Jonathan Westhues, April 2006
|
|
//-----------------------------------------------------------------------------
|
|
|
|
module lo_adc(
|
|
input pck0,
|
|
input [7:0] adc_d,
|
|
input [7:0] divisor,
|
|
input lf_field,
|
|
input ssp_dout,
|
|
|
|
output ssp_din,
|
|
output ssp_frame,
|
|
output ssp_clk,
|
|
output adc_clk,
|
|
output pwr_lo,
|
|
output pwr_hi,
|
|
output pwr_oe1,
|
|
output pwr_oe2,
|
|
output pwr_oe3,
|
|
output pwr_oe4,
|
|
output debug
|
|
);
|
|
|
|
reg [7:0] to_arm_shiftreg;
|
|
reg [7:0] pck_divider;
|
|
reg clk_state;
|
|
|
|
// Antenna logic, depending on "lf_field" (in arm defined as FPGA_LF_READER_FIELD)
|
|
wire tag_modulation = ssp_dout & !lf_field;
|
|
wire reader_modulation = !ssp_dout & lf_field & clk_state;
|
|
|
|
// always on (High Frequency outputs, unused)
|
|
assign pwr_oe1 = 1'b0;
|
|
assign pwr_hi = 1'b0;
|
|
|
|
// low frequency outputs
|
|
assign pwr_lo = reader_modulation;
|
|
assign pwr_oe2 = 1'b0; // 33 Ohms
|
|
assign pwr_oe3 = tag_modulation; // base antenna load = 33 Ohms
|
|
assign pwr_oe4 = 1'b0; // 10k Ohms
|
|
|
|
// Debug Output ADC clock
|
|
assign debug = adc_clk;
|
|
|
|
// ADC clock out of phase with antenna driver
|
|
assign adc_clk = ~clk_state;
|
|
|
|
// serialized SSP data is gated by clk_state to suppress unwanted signal
|
|
assign ssp_din = to_arm_shiftreg[7] && !clk_state;
|
|
|
|
// SSP clock always runs at 24MHz
|
|
assign ssp_clk = pck0;
|
|
|
|
// SSP frame is gated by clk_state and goes high when pck_divider=8..15
|
|
assign ssp_frame = (pck_divider[7:3] == 5'd1) && !clk_state;
|
|
|
|
// divide 24mhz down to 3mhz
|
|
always @(posedge pck0)
|
|
begin
|
|
if (pck_divider == divisor[7:0])
|
|
begin
|
|
pck_divider <= 8'd0;
|
|
clk_state = !clk_state;
|
|
end
|
|
else
|
|
begin
|
|
pck_divider <= pck_divider + 1;
|
|
end
|
|
end
|
|
|
|
// this task also runs at pck0 frequency (24Mhz) and is used to serialize
|
|
// the ADC output which is then clocked into the ARM SSP.
|
|
always @(posedge pck0)
|
|
begin
|
|
if ((pck_divider == 8'd7) && !clk_state)
|
|
to_arm_shiftreg <= adc_d;
|
|
else
|
|
begin
|
|
to_arm_shiftreg[7:1] <= to_arm_shiftreg[6:0];
|
|
to_arm_shiftreg[0] <= 1'b0;
|
|
end
|
|
end
|
|
|
|
endmodule
|