RfidResearchGroup/proxmark3
1
1
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2024-09-21 15:56:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
proxmark3/armsrc/hitag2.c
iceman1001 5ee53a0e75 ADD: There were lot of calls to enable tracing, but very few to turn it of afterwards in the methods. 
Don't know if it has some influence but can't hurt calling  "set_tracing(FALSE);"  when method returns.
2015-10-11 19:14:17 +02:00

1390 lines
40 KiB
C
Raw Blame History

//-----------------------------------------------------------------------------
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Hitag2 emulation (preliminary test version)
//
// (c) 2009 Henryk Plötz <henryk@ploetzli.ch>
//-----------------------------------------------------------------------------
// Hitag2 complete rewrite of the code
// - Fixed modulation/encoding issues
// - Rewrote code for transponder emulation
// - Added snooping of transponder communication
// - Added reader functionality
//
// (c) 2012 Roel Verdult
//-----------------------------------------------------------------------------
#include "proxmark3.h"
#include "apps.h"
#include "util.h"
#include "hitag2.h"
#include "string.h"
#include "BigBuf.h"
static bool bQuiet;
static bool bCrypto;
static bool bAuthenticating;
static bool bPwd;
static bool bSuccessful;
struct hitag2_tag {
uint32_t uid;
enum {
TAG_STATE_RESET = 0x01, // Just powered up, awaiting GetSnr
TAG_STATE_ACTIVATING = 0x02 , // In activation phase (password mode), sent UID, awaiting reader password
TAG_STATE_ACTIVATED = 0x03, // Activation complete, awaiting read/write commands
TAG_STATE_WRITING = 0x04, // In write command, awaiting sector contents to be written
} state;
unsigned int active_sector;
byte_t crypto_active;
uint64_t cs;
byte_t sectors[12][4];
};
static struct hitag2_tag tag = {
.state = TAG_STATE_RESET,
.sectors = { // Password mode: | Crypto mode:
[0] = { 0x02, 0x4e, 0x02, 0x20}, // UID | UID
[1] = { 0x4d, 0x49, 0x4b, 0x52}, // Password RWD | 32 bit LSB key
[2] = { 0x20, 0xf0, 0x4f, 0x4e}, // Reserved | 16 bit MSB key, 16 bit reserved
[3] = { 0x0e, 0xaa, 0x48, 0x54}, // Configuration, password TAG | Configuration, password TAG
[4] = { 0x46, 0x5f, 0x4f, 0x4b}, // Data: F_OK
[5] = { 0x55, 0x55, 0x55, 0x55}, // Data: UUUU
[6] = { 0xaa, 0xaa, 0xaa, 0xaa}, // Data: ....
[7] = { 0x55, 0x55, 0x55, 0x55}, // Data: UUUU
[8] = { 0x00, 0x00, 0x00, 0x00}, // RSK Low
[9] = { 0x00, 0x00, 0x00, 0x00}, // RSK High
[10] = { 0x00, 0x00, 0x00, 0x00}, // RCF
[11] = { 0x00, 0x00, 0x00, 0x00}, // SYNC
},
};
// ToDo: define a meaningful maximum size for auth_table. The bigger this is, the lower will be the available memory for traces.
// Historically it used to be FREE_BUFFER_SIZE, which was 2744.
#define AUTH_TABLE_LENGTH 2744
static byte_t* auth_table;
static size_t auth_table_pos = 0;
static size_t auth_table_len = AUTH_TABLE_LENGTH;
static byte_t password[4];
static byte_t NrAr[8];
static byte_t key[8];
static uint64_t cipher_state;
/* Following is a modified version of cryptolib.com/ciphers/hitag2/ */
// Software optimized 48-bit Philips/NXP Mifare Hitag2 PCF7936/46/47/52 stream cipher algorithm by I.C. Wiener 2006-2007.
// For educational purposes only.
// No warranties or guarantees of any kind.
// This code is released into the public domain by its author.
// Basic macros:
#define u8 uint8_t
#define u32 uint32_t
#define u64 uint64_t
#define rev8(x) ((((x)>>7)&1)+((((x)>>6)&1)<<1)+((((x)>>5)&1)<<2)+((((x)>>4)&1)<<3)+((((x)>>3)&1)<<4)+((((x)>>2)&1)<<5)+((((x)>>1)&1)<<6)+(((x)&1)<<7))
#define rev16(x) (rev8 (x)+(rev8 (x>> 8)<< 8))
#define rev32(x) (rev16(x)+(rev16(x>>16)<<16))
#define rev64(x) (rev32(x)+(rev32(x>>32)<<32))
#define bit(x,n) (((x)>>(n))&1)
#define bit32(x,n) ((((x)[(n)>>5])>>((n)))&1)
#define inv32(x,i,n) ((x)[(i)>>5]^=((u32)(n))<<((i)&31))
#define rotl64(x, n) ((((u64)(x))<<((n)&63))+(((u64)(x))>>((0-(n))&63)))
// Single bit Hitag2 functions:
#define i4(x,a,b,c,d) ((u32)((((x)>>(a))&1)+(((x)>>(b))&1)*2+(((x)>>(c))&1)*4+(((x)>>(d))&1)*8))
static const u32 ht2_f4a = 0x2C79; // 0010 1100 0111 1001
static const u32 ht2_f4b = 0x6671; // 0110 0110 0111 0001
static const u32 ht2_f5c = 0x7907287B; // 0111 1001 0000 0111 0010 1000 0111 1011
static u32 _f20 (const u64 x)
{
u32 i5;
i5 = ((ht2_f4a >> i4 (x, 1, 2, 4, 5)) & 1)* 1
+ ((ht2_f4b >> i4 (x, 7,11,13,14)) & 1)* 2
+ ((ht2_f4b >> i4 (x,16,20,22,25)) & 1)* 4
+ ((ht2_f4b >> i4 (x,27,28,30,32)) & 1)* 8
+ ((ht2_f4a >> i4 (x,33,42,43,45)) & 1)*16;
return (ht2_f5c >> i5) & 1;
}
static u64 _hitag2_init (const u64 key, const u32 serial, const u32 IV)
{
u32 i;
u64 x = ((key & 0xFFFF) << 32) + serial;
for (i = 0; i < 32; i++)
{
x >>= 1;
x += (u64) (_f20 (x) ^ (((IV >> i) ^ (key >> (i+16))) & 1)) << 47;
}
return x;
}
static u64 _hitag2_round (u64 *state)
{
u64 x = *state;
x = (x >> 1) +
((((x >> 0) ^ (x >> 2) ^ (x >> 3) ^ (x >> 6)
^ (x >> 7) ^ (x >> 8) ^ (x >> 16) ^ (x >> 22)
^ (x >> 23) ^ (x >> 26) ^ (x >> 30) ^ (x >> 41)
^ (x >> 42) ^ (x >> 43) ^ (x >> 46) ^ (x >> 47)) & 1) << 47);
*state = x;
return _f20 (x);
}
static u32 _hitag2_byte (u64 * x)
{
u32 i, c;
for (i = 0, c = 0; i < 8; i++) c += (u32) _hitag2_round (x) << (i^7);
return c;
}
static int hitag2_reset(void)
{
tag.state = TAG_STATE_RESET;
tag.crypto_active = 0;
return 0;
}
static int hitag2_init(void)
{
// memcpy(&tag, &resetdata, sizeof(tag));
hitag2_reset();
return 0;
}
static void hitag2_cipher_reset(struct hitag2_tag *tag, const byte_t *iv)
{
uint64_t key = ((uint64_t)tag->sectors[2][2]) |
((uint64_t)tag->sectors[2][3] << 8) |
((uint64_t)tag->sectors[1][0] << 16) |
((uint64_t)tag->sectors[1][1] << 24) |
((uint64_t)tag->sectors[1][2] << 32) |
((uint64_t)tag->sectors[1][3] << 40);
uint32_t uid = ((uint32_t)tag->sectors[0][0]) |
((uint32_t)tag->sectors[0][1] << 8) |
((uint32_t)tag->sectors[0][2] << 16) |
((uint32_t)tag->sectors[0][3] << 24);
uint32_t iv_ = (((uint32_t)(iv[0]))) |
(((uint32_t)(iv[1])) << 8) |
(((uint32_t)(iv[2])) << 16) |
(((uint32_t)(iv[3])) << 24);
tag->cs = _hitag2_init(rev64(key), rev32(uid), rev32(iv_));
}
static int hitag2_cipher_authenticate(uint64_t* cs, const byte_t *authenticator_is)
{
byte_t authenticator_should[4];
authenticator_should[0] = ~_hitag2_byte(cs);
authenticator_should[1] = ~_hitag2_byte(cs);
authenticator_should[2] = ~_hitag2_byte(cs);
authenticator_should[3] = ~_hitag2_byte(cs);
return (memcmp(authenticator_should, authenticator_is, 4) == 0);
}
static int hitag2_cipher_transcrypt(uint64_t* cs, byte_t *data, unsigned int bytes, unsigned int bits)
{
int i;
for(i=0; i<bytes; i++) data[i] ^= _hitag2_byte(cs);
for(i=0; i<bits; i++) data[bytes] ^= _hitag2_round(cs) << (7-i);
return 0;
}
// Sam7s has several timers, we will use the source TIMER_CLOCK1 (aka AT91C_TC_CLKS_TIMER_DIV1_CLOCK)
// TIMER_CLOCK1 = MCK/2, MCK is running at 48 MHz, Timer is running at 48/2 = 24 MHz
// Hitag units (T0) have duration of 8 microseconds (us), which is 1/125000 per second (carrier)
// T0 = TIMER_CLOCK1 / 125000 = 192
#define T0 192
#define SHORT_COIL() LOW(GPIO_SSC_DOUT)
#define OPEN_COIL() HIGH(GPIO_SSC_DOUT)
#define HITAG_FRAME_LEN 20
#define HITAG_T_STOP 36 /* T_EOF should be > 36 */
#define HITAG_T_LOW 8 /* T_LOW should be 4..10 */
#define HITAG_T_0_MIN 15 /* T[0] should be 18..22 */
#define HITAG_T_1_MIN 25 /* T[1] should be 26..30 */
//#define HITAG_T_EOF 40 /* T_EOF should be > 36 */
#define HITAG_T_EOF 80 /* T_EOF should be > 36 */
#define HITAG_T_WAIT_1 200 /* T_wresp should be 199..206 */
#define HITAG_T_WAIT_2 90 /* T_wresp should be 199..206 */
#define HITAG_T_WAIT_MAX 300 /* bit more than HITAG_T_WAIT_1 + HITAG_T_WAIT_2 */
#define HITAG_T_TAG_ONE_HALF_PERIOD 10
#define HITAG_T_TAG_TWO_HALF_PERIOD 25
#define HITAG_T_TAG_THREE_HALF_PERIOD 41
#define HITAG_T_TAG_FOUR_HALF_PERIOD 57
#define HITAG_T_TAG_HALF_PERIOD 16
#define HITAG_T_TAG_FULL_PERIOD 32
#define HITAG_T_TAG_CAPTURE_ONE_HALF 13
#define HITAG_T_TAG_CAPTURE_TWO_HALF 25
#define HITAG_T_TAG_CAPTURE_THREE_HALF 41
#define HITAG_T_TAG_CAPTURE_FOUR_HALF 57
static void hitag_send_bit(int bit) {
LED_A_ON();
// Reset clock for the next bit
AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
// Fixed modulation, earlier proxmark version used inverted signal
if(bit == 0) {
// Manchester: Unloaded, then loaded |__--|
LOW(GPIO_SSC_DOUT);
while(AT91C_BASE_TC0->TC_CV < T0*HITAG_T_TAG_HALF_PERIOD);
HIGH(GPIO_SSC_DOUT);
while(AT91C_BASE_TC0->TC_CV < T0*HITAG_T_TAG_FULL_PERIOD);
} else {
// Manchester: Loaded, then unloaded |--__|
HIGH(GPIO_SSC_DOUT);
while(AT91C_BASE_TC0->TC_CV < T0*HITAG_T_TAG_HALF_PERIOD);
LOW(GPIO_SSC_DOUT);
while(AT91C_BASE_TC0->TC_CV < T0*HITAG_T_TAG_FULL_PERIOD);
}
LED_A_OFF();
}
static void hitag_send_frame(const byte_t* frame, size_t frame_len)
{
// Send start of frame
for(size_t i=0; i<5; i++) {
hitag_send_bit(1);
}
// Send the content of the frame
for(size_t i=0; i<frame_len; i++) {
hitag_send_bit((frame[i/8] >> (7-(i%8)))&1);
}
// Drop the modulation
LOW(GPIO_SSC_DOUT);
}
static void hitag2_handle_reader_command(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen)
{
byte_t rx_air[HITAG_FRAME_LEN];
// Copy the (original) received frame how it is send over the air
memcpy(rx_air,rx,nbytes(rxlen));
if(tag.crypto_active) {
hitag2_cipher_transcrypt(&(tag.cs),rx,rxlen/8,rxlen%8);
}
// Reset the transmission frame length
*txlen = 0;
// Try to find out which command was send by selecting on length (in bits)
switch (rxlen) {
// Received 11000 from the reader, request for UID, send UID
case 05: {
// Always send over the air in the clear plaintext mode
if(rx_air[0] != 0xC0) {
// Unknown frame ?
return;
}
*txlen = 32;
memcpy(tx,tag.sectors[0],4);
tag.crypto_active = 0;
}
break;
// Read/Write command: ..xx x..y yy with yyy == ~xxx, xxx is sector number
case 10: {
unsigned int sector = (~( ((rx[0]<<2)&0x04) | ((rx[1]>>6)&0x03) ) & 0x07);
// Verify complement of sector index
if(sector != ((rx[0]>>3)&0x07)) {
//DbpString("Transmission error (read/write)");
return;
}
switch (rx[0] & 0xC6) {
// Read command: 11xx x00y
case 0xC0:
memcpy(tx,tag.sectors[sector],4);
*txlen = 32;
break;
// Inverted Read command: 01xx x10y
case 0x44:
for (size_t i=0; i<4; i++) {
tx[i] = tag.sectors[sector][i] ^ 0xff;
}
*txlen = 32;
break;
// Write command: 10xx x01y
case 0x82:
// Prepare write, acknowledge by repeating command
memcpy(tx,rx,nbytes(rxlen));
*txlen = rxlen;
tag.active_sector = sector;
tag.state=TAG_STATE_WRITING;
break;
// Unknown command
default:
Dbprintf("Uknown command: %02x %02x",rx[0],rx[1]);
return;
break;
}
}
break;
// Writing data or Reader password
case 32: {
if(tag.state == TAG_STATE_WRITING) {
// These are the sector contents to be written. We don't have to do anything else.
memcpy(tag.sectors[tag.active_sector],rx,nbytes(rxlen));
tag.state=TAG_STATE_RESET;
return;
} else {
// Received RWD password, respond with configuration and our password
if(memcmp(rx,tag.sectors[1],4) != 0) {
DbpString("Reader password is wrong");
return;
}
*txlen = 32;
memcpy(tx,tag.sectors[3],4);
}
}
break;
// Received RWD authentication challenge and respnse
case 64: {
// Store the authentication attempt
if (auth_table_len < (AUTH_TABLE_LENGTH-8)) {
memcpy(auth_table+auth_table_len,rx,8);
auth_table_len += 8;
}
// Reset the cipher state
hitag2_cipher_reset(&tag,rx);
// Check if the authentication was correct
if(!hitag2_cipher_authenticate(&(tag.cs),rx+4)) {
// The reader failed to authenticate, do nothing
Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed!",rx[0],rx[1],rx[2],rx[3],rx[4],rx[5],rx[6],rx[7]);
return;
}
// Succesful, but commented out reporting back to the Host, this may delay to much.
// Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x OK!",rx[0],rx[1],rx[2],rx[3],rx[4],rx[5],rx[6],rx[7]);
// Activate encryption algorithm for all further communication
tag.crypto_active = 1;
// Use the tag password as response
memcpy(tx,tag.sectors[3],4);
*txlen = 32;
}
break;
}
// LogTraceHitag(rx,rxlen,0,0,false);
// LogTraceHitag(tx,*txlen,0,0,true);
if(tag.crypto_active) {
hitag2_cipher_transcrypt(&(tag.cs), tx, *txlen/8, *txlen%8);
}
}
static void hitag_reader_send_bit(int bit) {
LED_A_ON();
// Reset clock for the next bit
AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
// Binary puls length modulation (BPLM) is used to encode the data stream
// This means that a transmission of a one takes longer than that of a zero
// Enable modulation, which means, drop the the field
HIGH(GPIO_SSC_DOUT);
// Wait for 4-10 times the carrier period
while(AT91C_BASE_TC0->TC_CV < T0*6);
// SpinDelayUs(8*8);
// Disable modulation, just activates the field again
LOW(GPIO_SSC_DOUT);
if(bit == 0) {
// Zero bit: |_-|
while(AT91C_BASE_TC0->TC_CV < T0*22);
// SpinDelayUs(16*8);
} else {
// One bit: |_--|
while(AT91C_BASE_TC0->TC_CV < T0*28);
// SpinDelayUs(22*8);
}
LED_A_OFF();
}
static void hitag_reader_send_frame(const byte_t* frame, size_t frame_len)
{
// Send the content of the frame
for(size_t i=0; i<frame_len; i++) {
hitag_reader_send_bit((frame[i/8] >> (7-(i%8)))&1);
}
// Send EOF
AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
// Enable modulation, which means, drop the the field
HIGH(GPIO_SSC_DOUT);
// Wait for 4-10 times the carrier period
while(AT91C_BASE_TC0->TC_CV < T0*6);
// Disable modulation, just activates the field again
LOW(GPIO_SSC_DOUT);
}
size_t blocknr;
static bool hitag2_password(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
// Reset the transmission frame length
*txlen = 0;
// Try to find out which command was send by selecting on length (in bits)
switch (rxlen) {
// No answer, try to resurrect
case 0: {
// Stop if there is no answer (after sending password)
if (bPwd) {
DbpString("Password failed!");
return false;
}
*txlen = 5;
memcpy(tx,"\xc0",nbytes(*txlen));
} break;
// Received UID, tag password
case 32: {
if (!bPwd) {
*txlen = 32;
memcpy(tx,password,4);
bPwd = true;
memcpy(tag.sectors[blocknr],rx,4);
blocknr++;
} else {
if(blocknr == 1){
//store password in block1, the TAG answers with Block3, but we need the password in memory
memcpy(tag.sectors[blocknr],tx,4);
}else{
memcpy(tag.sectors[blocknr],rx,4);
}
blocknr++;
if (blocknr > 7) {
DbpString("Read succesful!");
bSuccessful = true;
return false;
}
*txlen = 10;
tx[0] = 0xc0 | (blocknr << 3) | ((blocknr^7) >> 2);
tx[1] = ((blocknr^7) << 6);
}
} break;
// Unexpected response
default: {
Dbprintf("Uknown frame length: %d",rxlen);
return false;
} break;
}
return true;
}
static bool hitag2_crypto(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
// Reset the transmission frame length
*txlen = 0;
if(bCrypto) {
hitag2_cipher_transcrypt(&cipher_state,rx,rxlen/8,rxlen%8);
}
// Try to find out which command was send by selecting on length (in bits)
switch (rxlen) {
// No answer, try to resurrect
case 0: {
// Stop if there is no answer while we are in crypto mode (after sending NrAr)
if (bCrypto) {
// Failed during authentication
if (bAuthenticating) {
DbpString("Authentication failed!");
return false;
} else {
// Failed reading a block, could be (read/write) locked, skip block and re-authenticate
if (blocknr == 1) {
// Write the low part of the key in memory
memcpy(tag.sectors[1],key+2,4);
} else if (blocknr == 2) {
// Write the high part of the key in memory
tag.sectors[2][0] = 0x00;
tag.sectors[2][1] = 0x00;
tag.sectors[2][2] = key[0];
tag.sectors[2][3] = key[1];
} else {
// Just put zero's in the memory (of the unreadable block)
memset(tag.sectors[blocknr],0x00,4);
}
blocknr++;
bCrypto = false;
}
} else {
*txlen = 5;
memcpy(tx,"\xc0",nbytes(*txlen));
}
} break;
// Received UID, crypto tag answer
case 32: {
if (!bCrypto) {
uint64_t ui64key = key[0] | ((uint64_t)key[1]) << 8 | ((uint64_t)key[2]) << 16 | ((uint64_t)key[3]) << 24 | ((uint64_t)key[4]) << 32 | ((uint64_t)key[5]) << 40;
uint32_t ui32uid = rx[0] | ((uint32_t)rx[1]) << 8 | ((uint32_t)rx[2]) << 16 | ((uint32_t)rx[3]) << 24;
cipher_state = _hitag2_init(rev64(ui64key), rev32(ui32uid), 0);
memset(tx,0x00,4);
memset(tx+4,0xff,4);
hitag2_cipher_transcrypt(&cipher_state,tx+4,4,0);
*txlen = 64;
bCrypto = true;
bAuthenticating = true;
} else {
// Check if we received answer tag (at)
if (bAuthenticating) {
bAuthenticating = false;
} else {
// Store the received block
memcpy(tag.sectors[blocknr],rx,4);
blocknr++;
}
if (blocknr > 7) {
DbpString("Read succesful!");
bSuccessful = true;
return false;
}
*txlen = 10;
tx[0] = 0xc0 | (blocknr << 3) | ((blocknr^7) >> 2);
tx[1] = ((blocknr^7) << 6);
}
} break;
// Unexpected response
default: {
Dbprintf("Uknown frame length: %d",rxlen);
return false;
} break;
}
if(bCrypto) {
// We have to return now to avoid double encryption
if (!bAuthenticating) {
hitag2_cipher_transcrypt(&cipher_state,tx,*txlen/8,*txlen%8);
}
}
return true;
}
static bool hitag2_authenticate(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
// Reset the transmission frame length
*txlen = 0;
// Try to find out which command was send by selecting on length (in bits)
switch (rxlen) {
// No answer, try to resurrect
case 0: {
// Stop if there is no answer while we are in crypto mode (after sending NrAr)
if (bCrypto) {
DbpString("Authentication failed!");
return false;
}
*txlen = 5;
memcpy(tx,"\xc0",nbytes(*txlen));
} break;
// Received UID, crypto tag answer
case 32: {
if (!bCrypto) {
*txlen = 64;
memcpy(tx,NrAr,8);
bCrypto = true;
} else {
DbpString("Authentication succesful!");
// We are done... for now
return false;
}
} break;
// Unexpected response
default: {
Dbprintf("Uknown frame length: %d",rxlen);
return false;
} break;
}
return true;
}
static bool hitag2_test_auth_attempts(byte_t* rx, const size_t rxlen, byte_t* tx, size_t* txlen) {
// Reset the transmission frame length
*txlen = 0;
// Try to find out which command was send by selecting on length (in bits)
switch (rxlen) {
// No answer, try to resurrect
case 0: {
// Stop if there is no answer while we are in crypto mode (after sending NrAr)
if (bCrypto) {
Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x Failed, removed entry!",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]);
// Removing failed entry from authentiations table
memcpy(auth_table+auth_table_pos,auth_table+auth_table_pos+8,8);
auth_table_len -= 8;
// Return if we reached the end of the authentications table
bCrypto = false;
if (auth_table_pos == auth_table_len) {
return false;
}
// Copy the next authentication attempt in row (at the same position, b/c we removed last failed entry)
memcpy(NrAr,auth_table+auth_table_pos,8);
}
*txlen = 5;
memcpy(tx,"\xc0",nbytes(*txlen));
} break;
// Received UID, crypto tag answer, or read block response
case 32: {
if (!bCrypto) {
*txlen = 64;
memcpy(tx,NrAr,8);
bCrypto = true;
} else {
Dbprintf("auth: %02x%02x%02x%02x%02x%02x%02x%02x OK",NrAr[0],NrAr[1],NrAr[2],NrAr[3],NrAr[4],NrAr[5],NrAr[6],NrAr[7]);
bCrypto = false;
if ((auth_table_pos+8) == auth_table_len) {
return false;
}
auth_table_pos += 8;
memcpy(NrAr,auth_table+auth_table_pos,8);
}
} break;
default: {
Dbprintf("Uknown frame length: %d",rxlen);
return false;
} break;
}
return true;
}
void SnoopHitag(uint32_t type) {
int frame_count;
int response;
int overflow;
bool rising_edge;
bool reader_frame;
int lastbit;
bool bSkip;
int tag_sof;
byte_t rx[HITAG_FRAME_LEN];
size_t rxlen=0;
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
// Clean up trace and prepare it for storing frames
set_tracing(TRUE);
clear_trace();
auth_table_len = 0;
auth_table_pos = 0;
BigBuf_free();
auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
DbpString("Starting Hitag2 snoop");
LED_D_ON();
// Set up eavesdropping mode, frequency divisor which will drive the FPGA
// and analog mux selection.
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_TOGGLE_MODE);
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
RELAY_OFF();
// Configure output pin that is connected to the FPGA (for modulating)
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
// Disable modulation, we are going to eavesdrop, not modulate ;)
LOW(GPIO_SSC_DOUT);
// Enable Peripheral Clock for TIMER_CLOCK1, used to capture edges of the reader frames
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
// Disable timer during configuration
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
// Capture mode, defaul timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
// external trigger rising edge, load RA on rising edge of TIOA.
uint32_t t1_channel_mode = AT91C_TC_CLKS_TIMER_DIV1_CLOCK | AT91C_TC_ETRGEDG_BOTH | AT91C_TC_ABETRG | AT91C_TC_LDRA_BOTH;
AT91C_BASE_TC1->TC_CMR = t1_channel_mode;
// Enable and reset counter
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
// Reset the received frame, frame count and timing info
memset(rx,0x00,sizeof(rx));
frame_count = 0;
response = 0;
overflow = 0;
reader_frame = false;
lastbit = 1;
bSkip = true;
tag_sof = 4;
while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
// Watchdog hit
WDT_HIT();
// Receive frame, watch for at most T0*EOF periods
while (AT91C_BASE_TC1->TC_CV < T0*HITAG_T_EOF) {
// Check if rising edge in modulation is detected
if(AT91C_BASE_TC1->TC_SR & AT91C_TC_LDRAS) {
// Retrieve the new timing values
int ra = (AT91C_BASE_TC1->TC_RA/T0);
// Find out if we are dealing with a rising or falling edge
rising_edge = (AT91C_BASE_PIOA->PIO_PDSR & GPIO_SSC_FRAME) > 0;
// Shorter periods will only happen with reader frames
if (!reader_frame && rising_edge && ra < HITAG_T_TAG_CAPTURE_ONE_HALF) {
// Switch from tag to reader capture
LED_C_OFF();
reader_frame = true;
memset(rx,0x00,sizeof(rx));
rxlen = 0;
}
// Only handle if reader frame and rising edge, or tag frame and falling edge
if (reader_frame != rising_edge) {
overflow += ra;
continue;
}
// Add the buffered timing values of earlier captured edges which were skipped
ra += overflow;
overflow = 0;
if (reader_frame) {
LED_B_ON();
// Capture reader frame
if(ra >= HITAG_T_STOP) {
if (rxlen != 0) {
//DbpString("wierd0?");
}
// Capture the T0 periods that have passed since last communication or field drop (reset)
response = (ra - HITAG_T_LOW);
} else if(ra >= HITAG_T_1_MIN ) {
// '1' bit
rx[rxlen / 8] |= 1 << (7-(rxlen%8));
rxlen++;
} else if(ra >= HITAG_T_0_MIN) {
// '0' bit
rx[rxlen / 8] |= 0 << (7-(rxlen%8));
rxlen++;
} else {
// Ignore wierd value, is to small to mean anything
}
} else {
LED_C_ON();
// Capture tag frame (manchester decoding using only falling edges)
if(ra >= HITAG_T_EOF) {
if (rxlen != 0) {
//DbpString("wierd1?");
}
// Capture the T0 periods that have passed since last communication or field drop (reset)
// We always recieve a 'one' first, which has the falling edge after a half period |-_|
response = ra-HITAG_T_TAG_HALF_PERIOD;
} else if(ra >= HITAG_T_TAG_CAPTURE_FOUR_HALF) {
// Manchester coding example |-_|_-|-_| (101)
rx[rxlen / 8] |= 0 << (7-(rxlen%8));
rxlen++;
rx[rxlen / 8] |= 1 << (7-(rxlen%8));
rxlen++;
} else if(ra >= HITAG_T_TAG_CAPTURE_THREE_HALF) {
// Manchester coding example |_-|...|_-|-_| (0...01)
rx[rxlen / 8] |= 0 << (7-(rxlen%8));
rxlen++;
// We have to skip this half period at start and add the 'one' the second time
if (!bSkip) {
rx[rxlen / 8] |= 1 << (7-(rxlen%8));
rxlen++;
}
lastbit = !lastbit;
bSkip = !bSkip;
} else if(ra >= HITAG_T_TAG_CAPTURE_TWO_HALF) {
// Manchester coding example |_-|_-| (00) or |-_|-_| (11)
if (tag_sof) {
// Ignore bits that are transmitted during SOF
tag_sof--;
} else {
// bit is same as last bit
rx[rxlen / 8] |= lastbit << (7-(rxlen%8));
rxlen++;
}
} else {
// Ignore wierd value, is to small to mean anything
}
}
}
}
// Check if frame was captured
if(rxlen > 0) {
frame_count++;
if (!LogTraceHitag(rx,rxlen,response,0,reader_frame)) {
DbpString("Trace full");
break;
}
// Check if we recognize a valid authentication attempt
if (nbytes(rxlen) == 8) {
// Store the authentication attempt
if (auth_table_len < (AUTH_TABLE_LENGTH-8)) {
memcpy(auth_table+auth_table_len,rx,8);
auth_table_len += 8;
}
}
// Reset the received frame and response timing info
memset(rx,0x00,sizeof(rx));
response = 0;
reader_frame = false;
lastbit = 1;
bSkip = true;
tag_sof = 4;
overflow = 0;
LED_B_OFF();
LED_C_OFF();
} else {
// Save the timer overflow, will be 0 when frame was received
overflow += (AT91C_BASE_TC1->TC_CV/T0);
}
// Reset the frame length
rxlen = 0;
// Reset the timer to restart while-loop that receives frames
AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG;
}
LED_A_ON();
LED_B_OFF();
LED_C_OFF();
LED_D_OFF();
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
LED_A_OFF();
set_tracing(TRUE);
// Dbprintf("frame received: %d",frame_count);
// Dbprintf("Authentication Attempts: %d",(auth_table_len/8));
// DbpString("All done");
}
void SimulateHitagTag(bool tag_mem_supplied, byte_t* data) {
int frame_count;
int response;
int overflow;
byte_t rx[HITAG_FRAME_LEN];
size_t rxlen=0;
byte_t tx[HITAG_FRAME_LEN];
size_t txlen=0;
bool bQuitTraceFull = false;
bQuiet = false;
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
// Clean up trace and prepare it for storing frames
set_tracing(TRUE);
clear_trace();
auth_table_len = 0;
auth_table_pos = 0;
byte_t* auth_table;
BigBuf_free();
auth_table = (byte_t *)BigBuf_malloc(AUTH_TABLE_LENGTH);
memset(auth_table, 0x00, AUTH_TABLE_LENGTH);
DbpString("Starting Hitag2 simulation");
LED_D_ON();
hitag2_init();
if (tag_mem_supplied) {
DbpString("Loading hitag2 memory...");
memcpy((byte_t*)tag.sectors,data,48);
}
uint32_t block = 0;
for (size_t i=0; i<12; i++) {
for (size_t j=0; j<4; j++) {
block <<= 8;
block |= tag.sectors[i][j];
}
Dbprintf("| %d | %08x |",i,block);
}
// Set up simulator mode, frequency divisor which will drive the FPGA
// and analog mux selection.
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
RELAY_OFF();
// Configure output pin that is connected to the FPGA (for modulating)
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
// Disable modulation at default, which means release resistance
LOW(GPIO_SSC_DOUT);
// Enable Peripheral Clock for TIMER_CLOCK0, used to measure exact timing before answering
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC0);
// Enable Peripheral Clock for TIMER_CLOCK1, used to capture edges of the reader frames
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
// Disable timer during configuration
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
// Capture mode, default timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
// external trigger rising edge, load RA on rising edge of TIOA.
AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_TIMER_DIV1_CLOCK | AT91C_TC_ETRGEDG_RISING | AT91C_TC_ABETRG | AT91C_TC_LDRA_RISING;
// Reset the received frame, frame count and timing info
memset(rx,0x00,sizeof(rx));
frame_count = 0;
response = 0;
overflow = 0;
// Enable and reset counter
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
while(!BUTTON_PRESS() && !usb_poll_validate_length()) {
// Watchdog hit
WDT_HIT();
// Receive frame, watch for at most T0*EOF periods
while (AT91C_BASE_TC1->TC_CV < T0*HITAG_T_EOF) {
// Check if rising edge in modulation is detected
if(AT91C_BASE_TC1->TC_SR & AT91C_TC_LDRAS) {
// Retrieve the new timing values
int ra = (AT91C_BASE_TC1->TC_RA/T0) + overflow;
overflow = 0;
// Reset timer every frame, we have to capture the last edge for timing
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
LED_B_ON();
// Capture reader frame
if(ra >= HITAG_T_STOP) {
if (rxlen != 0) {
//DbpString("wierd0?");
}
// Capture the T0 periods that have passed since last communication or field drop (reset)
response = (ra - HITAG_T_LOW);
} else if(ra >= HITAG_T_1_MIN ) {
// '1' bit
rx[rxlen / 8] |= 1 << (7-(rxlen%8));
rxlen++;
} else if(ra >= HITAG_T_0_MIN) {
// '0' bit
rx[rxlen / 8] |= 0 << (7-(rxlen%8));
rxlen++;
} else {
// Ignore wierd value, is to small to mean anything
}
}
}
// Check if frame was captured
if(rxlen > 4) {
frame_count++;
if (!bQuiet) {
if (!LogTraceHitag(rx,rxlen,response,0,true)) {
DbpString("Trace full");
if (bQuitTraceFull) {
break;
} else {
bQuiet = true;
}
}
}
// Disable timer 1 with external trigger to avoid triggers during our own modulation
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
// Process the incoming frame (rx) and prepare the outgoing frame (tx)
hitag2_handle_reader_command(rx,rxlen,tx,&txlen);
// Wait for HITAG_T_WAIT_1 carrier periods after the last reader bit,
// not that since the clock counts since the rising edge, but T_Wait1 is
// with respect to the falling edge, we need to wait actually (T_Wait1 - T_Low)
// periods. The gap time T_Low varies (4..10). All timer values are in
// terms of T0 units
while(AT91C_BASE_TC0->TC_CV < T0*(HITAG_T_WAIT_1-HITAG_T_LOW));
// Send and store the tag answer (if there is any)
if (txlen) {
// Transmit the tag frame
hitag_send_frame(tx,txlen);
// Store the frame in the trace
if (!bQuiet) {
if (!LogTraceHitag(tx,txlen,0,0,false)) {
DbpString("Trace full");
if (bQuitTraceFull) {
break;
} else {
bQuiet = true;
}
}
}
}
// Reset the received frame and response timing info
memset(rx,0x00,sizeof(rx));
response = 0;
// Enable and reset external trigger in timer for capturing future frames
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
LED_B_OFF();
}
// Reset the frame length
rxlen = 0;
// Save the timer overflow, will be 0 when frame was received
overflow += (AT91C_BASE_TC1->TC_CV/T0);
// Reset the timer to restart while-loop that receives frames
AT91C_BASE_TC1->TC_CCR = AT91C_TC_SWTRG;
}
LED_B_OFF();
LED_D_OFF();
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
DbpString("Sim Stopped");
set_tracing(TRUE);
}
void ReaderHitag(hitag_function htf, hitag_data* htd) {
int frame_count;
int response;
byte_t rx[HITAG_FRAME_LEN];
size_t rxlen=0;
byte_t txbuf[HITAG_FRAME_LEN];
byte_t* tx = txbuf;
size_t txlen=0;
int lastbit;
bool bSkip;
int reset_sof;
int tag_sof;
int t_wait = HITAG_T_WAIT_MAX;
bool bStop;
bool bQuitTraceFull = false;
FpgaDownloadAndGo(FPGA_BITSTREAM_LF);
// Reset the return status
bSuccessful = false;
// Clean up trace and prepare it for storing frames
set_tracing(TRUE);
clear_trace();
DbpString("Starting Hitag reader family");
// Check configuration
switch(htf) {
case RHT2F_PASSWORD: {
Dbprintf("List identifier in password mode");
memcpy(password,htd->pwd.password,4);
blocknr = 0;
bQuitTraceFull = false;
bQuiet = false;
bPwd = false;
} break;
case RHT2F_AUTHENTICATE: {
DbpString("Authenticating using nr,ar pair:");
memcpy(NrAr,htd->auth.NrAr,8);
Dbhexdump(8,NrAr,false);
bQuiet = false;
bCrypto = false;
bAuthenticating = false;
bQuitTraceFull = true;
} break;
case RHT2F_CRYPTO: {
DbpString("Authenticating using key:");
memcpy(key,htd->crypto.key,4); //HACK; 4 or 6?? I read both in the code.
Dbhexdump(6,key,false);
blocknr = 0;
bQuiet = false;
bCrypto = false;
bAuthenticating = false;
bQuitTraceFull = true;
} break;
case RHT2F_TEST_AUTH_ATTEMPTS: {
Dbprintf("Testing %d authentication attempts",(auth_table_len/8));
auth_table_pos = 0;
memcpy(NrAr, auth_table, 8);
bQuitTraceFull = false;
bQuiet = false;
bCrypto = false;
} break;
default: {
Dbprintf("Error, unknown function: %d",htf);
set_tracing(FALSE);
return;
} break;
}
LED_D_ON();
hitag2_init();
// Configure output and enable pin that is connected to the FPGA (for modulating)
AT91C_BASE_PIOA->PIO_OER = GPIO_SSC_DOUT;
AT91C_BASE_PIOA->PIO_PER = GPIO_SSC_DOUT;
// Set fpga in edge detect with reader field, we can modulate as reader now
FpgaWriteConfWord(FPGA_MAJOR_MODE_LF_EDGE_DETECT | FPGA_LF_EDGE_DETECT_READER_FIELD);
// Set Frequency divisor which will drive the FPGA and analog mux selection
FpgaSendCommand(FPGA_CMD_SET_DIVISOR, 95); //125Khz
SetAdcMuxFor(GPIO_MUXSEL_LOPKD);
RELAY_OFF();
// Disable modulation at default, which means enable the field
LOW(GPIO_SSC_DOUT);
// Give it a bit of time for the resonant antenna to settle.
SpinDelay(30);
// Enable Peripheral Clock for TIMER_CLOCK0, used to measure exact timing before answering
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC0);
// Enable Peripheral Clock for TIMER_CLOCK1, used to capture edges of the tag frames
AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_TC1);
AT91C_BASE_PIOA->PIO_BSR = GPIO_SSC_FRAME;
// Disable timer during configuration
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
// Capture mode, defaul timer source = MCK/2 (TIMER_CLOCK1), TIOA is external trigger,
// external trigger rising edge, load RA on falling edge of TIOA.
AT91C_BASE_TC1->TC_CMR = AT91C_TC_CLKS_TIMER_DIV1_CLOCK | AT91C_TC_ETRGEDG_FALLING | AT91C_TC_ABETRG | AT91C_TC_LDRA_FALLING;
// Enable and reset counters
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
// Reset the received frame, frame count and timing info
frame_count = 0;
response = 0;
lastbit = 1;
bStop = false;
// Tag specific configuration settings (sof, timings, etc.)
if (htf < 10){
// hitagS settings
reset_sof = 1;
t_wait = 200;
DbpString("Configured for hitagS reader");
} else if (htf < 20) {
// hitag1 settings
reset_sof = 1;
t_wait = 200;
DbpString("Configured for hitag1 reader");
} else if (htf < 30) {
// hitag2 settings
reset_sof = 4;
t_wait = HITAG_T_WAIT_2;
DbpString("Configured for hitag2 reader");
} else {
Dbprintf("Error, unknown hitag reader type: %d",htf);
set_tracing(FALSE);
return;
}
while(!bStop && !BUTTON_PRESS()) {
// Watchdog hit
WDT_HIT();
// Check if frame was captured and store it
if(rxlen > 0) {
frame_count++;
if (!bQuiet) {
if (!LogTraceHitag(rx,rxlen,response,0,false)) {
DbpString("Trace full");
if (bQuitTraceFull) {
break;
} else {
bQuiet = true;
}
}
}
}
// By default reset the transmission buffer
tx = txbuf;
switch(htf) {
case RHT2F_PASSWORD: {
bStop = !hitag2_password(rx,rxlen,tx,&txlen);
} break;
case RHT2F_AUTHENTICATE: {
bStop = !hitag2_authenticate(rx,rxlen,tx,&txlen);
} break;
case RHT2F_CRYPTO: {
bStop = !hitag2_crypto(rx,rxlen,tx,&txlen);
} break;
case RHT2F_TEST_AUTH_ATTEMPTS: {
bStop = !hitag2_test_auth_attempts(rx,rxlen,tx,&txlen);
} break;
default: {
Dbprintf("Error, unknown function: %d",htf);
set_tracing(FALSE);
return;
} break;
}
// Send and store the reader command
// Disable timer 1 with external trigger to avoid triggers during our own modulation
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
// Wait for HITAG_T_WAIT_2 carrier periods after the last tag bit before transmitting,
// Since the clock counts since the last falling edge, a 'one' means that the
// falling edge occured halfway the period. with respect to this falling edge,
// we need to wait (T_Wait2 + half_tag_period) when the last was a 'one'.
// All timer values are in terms of T0 units
while(AT91C_BASE_TC0->TC_CV < T0*(t_wait+(HITAG_T_TAG_HALF_PERIOD*lastbit)));
// Transmit the reader frame
hitag_reader_send_frame(tx,txlen);
// Enable and reset external trigger in timer for capturing future frames
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKEN | AT91C_TC_SWTRG;
// Add transmitted frame to total count
if(txlen > 0) {
frame_count++;
if (!bQuiet) {
// Store the frame in the trace
if (!LogTraceHitag(tx,txlen,HITAG_T_WAIT_2,0,true)) {
if (bQuitTraceFull) {
break;
} else {
bQuiet = true;
}
}
}
}
// Reset values for receiving frames
memset(rx,0x00,sizeof(rx));
rxlen = 0;
lastbit = 1;
bSkip = true;
tag_sof = reset_sof;
response = 0;
// Receive frame, watch for at most T0*EOF periods
while (AT91C_BASE_TC1->TC_CV < T0*HITAG_T_WAIT_MAX) {
// Check if falling edge in tag modulation is detected
if(AT91C_BASE_TC1->TC_SR & AT91C_TC_LDRAS) {
// Retrieve the new timing values
int ra = (AT91C_BASE_TC1->TC_RA/T0);
// Reset timer every frame, we have to capture the last edge for timing
AT91C_BASE_TC0->TC_CCR = AT91C_TC_SWTRG;
LED_B_ON();
// Capture tag frame (manchester decoding using only falling edges)
if(ra >= HITAG_T_EOF) {
if (rxlen != 0) {
//DbpString("wierd1?");
}
// Capture the T0 periods that have passed since last communication or field drop (reset)
// We always recieve a 'one' first, which has the falling edge after a half period |-_|
response = ra-HITAG_T_TAG_HALF_PERIOD;
} else if(ra >= HITAG_T_TAG_CAPTURE_FOUR_HALF) {
// Manchester coding example |-_|_-|-_| (101)
rx[rxlen / 8] |= 0 << (7-(rxlen%8));
rxlen++;
rx[rxlen / 8] |= 1 << (7-(rxlen%8));
rxlen++;
} else if(ra >= HITAG_T_TAG_CAPTURE_THREE_HALF) {
// Manchester coding example |_-|...|_-|-_| (0...01)
rx[rxlen / 8] |= 0 << (7-(rxlen%8));
rxlen++;
// We have to skip this half period at start and add the 'one' the second time
if (!bSkip) {
rx[rxlen / 8] |= 1 << (7-(rxlen%8));
rxlen++;
}
lastbit = !lastbit;
bSkip = !bSkip;
} else if(ra >= HITAG_T_TAG_CAPTURE_TWO_HALF) {
// Manchester coding example |_-|_-| (00) or |-_|-_| (11)
if (tag_sof) {
// Ignore bits that are transmitted during SOF
tag_sof--;
} else {
// bit is same as last bit
rx[rxlen / 8] |= lastbit << (7-(rxlen%8));
rxlen++;
}
} else {
// Ignore wierd value, is to small to mean anything
}
}
// We can break this loop if we received the last bit from a frame
if (AT91C_BASE_TC1->TC_CV > T0*HITAG_T_EOF) {
if (rxlen>0) break;
}
}
}
LED_B_OFF();
LED_D_OFF();
AT91C_BASE_TC1->TC_CCR = AT91C_TC_CLKDIS;
AT91C_BASE_TC0->TC_CCR = AT91C_TC_CLKDIS;
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
Dbprintf("DONE: frame received: %d",frame_count);
cmd_send(CMD_ACK,bSuccessful,0,0,(byte_t*)tag.sectors,48);
set_tracing(FALSE);
}
Reference in a new issue View git blame Copy permalink