mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-09-20 23:36:31 +08:00
d19754567d
* .h include only the strict minimum for their own parsing * this forces all files to include explicitment their needs and not count on far streched dependencies * this helps Makefile to rebuild only the minimum * according to this rule, most standalone .h are now gone * big app.h is gone * remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway * all unrequired include were removed * split common/ into common/ (client+arm) and common_arm/ (os+bootloader) * bring zlib to common/ * bring stuff not really/not yet used in common back to armsrc/ or client/ * bring liblua into client/ * bring uart into client/ * move some portions of code around (dbprint, protocols,...) * rename unused files into *_disabled.[ch] to make it explicit * rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash * remove PrintAndLogDevice * move deprecated-hid-flasher from client to tools * Makefiles * treat deps in armsrc/ as in client/ * client: stop on warning (-Werror), same as for armsrc/ Tested on: * all standalone modes * Linux
49 lines
1.5 KiB
C
49 lines
1.5 KiB
C
#ifndef __I2C_H
|
|
#define __I2C_H
|
|
|
|
#include "common.h"
|
|
#include "mifare.h"
|
|
|
|
#define I2C_DEVICE_ADDRESS_BOOT 0xB0
|
|
#define I2C_DEVICE_ADDRESS_MAIN 0xC0
|
|
|
|
#define I2C_DEVICE_CMD_GENERATE_ATR 0x01
|
|
#define I2C_DEVICE_CMD_SEND 0x02
|
|
#define I2C_DEVICE_CMD_READ 0x03
|
|
#define I2C_DEVICE_CMD_SETBAUD 0x04
|
|
#define I2C_DEVICE_CMD_SIM_CLC 0x05
|
|
#define I2C_DEVICE_CMD_GETVERSION 0x06
|
|
#define I2C_DEVICE_CMD_SEND_T0 0x07
|
|
|
|
void I2C_recovery(void);
|
|
void I2C_init(void);
|
|
void I2C_Reset(void);
|
|
void I2C_SetResetStatus(uint8_t LineRST, uint8_t LineSCK, uint8_t LineSDA);
|
|
|
|
void I2C_Reset_EnterMainProgram(void);
|
|
void I2C_Reset_EnterBootloader(void);
|
|
|
|
bool I2C_WriteCmd(uint8_t device_cmd, uint8_t device_address);
|
|
|
|
bool I2C_WriteByte(uint8_t data, uint8_t device_cmd, uint8_t device_address);
|
|
bool I2C_BufferWrite(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address);
|
|
int16_t I2C_BufferRead(uint8_t *data, uint8_t len, uint8_t device_cmd, uint8_t device_address);
|
|
|
|
// for firmware
|
|
int16_t I2C_ReadFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address);
|
|
bool I2C_WriteFW(uint8_t *data, uint8_t len, uint8_t msb, uint8_t lsb, uint8_t device_address);
|
|
|
|
//
|
|
bool GetATR(smart_card_atr_t *card_ptr);
|
|
|
|
// generice functions
|
|
void SmartCardAtr(void);
|
|
void SmartCardRaw(uint64_t arg0, uint64_t arg1, uint8_t *data);
|
|
void SmartCardUpgrade(uint64_t arg0);
|
|
void SmartCardSetBaud(uint64_t arg0);
|
|
void SmartCardSetClock(uint64_t arg0);
|
|
void I2C_print_status(void);
|
|
int I2C_get_version(uint8_t *maj, uint8_t *min);
|
|
|
|
#endif
|