mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-12-27 10:34:08 +08:00
102 lines
2.5 KiB
Verilog
102 lines
2.5 KiB
Verilog
//-----------------------------------------------------------------------------
|
|
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
|
|
//
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
//
|
|
// See LICENSE.txt for the text of the license.
|
|
//-----------------------------------------------------------------------------
|
|
//
|
|
// The way that we connect things in low-frequency simulation mode. In this
|
|
// case just pass everything through to the ARM, which can bit-bang this
|
|
// (because it is so slow).
|
|
//
|
|
// Jonathan Westhues, April 2006
|
|
//-----------------------------------------------------------------------------
|
|
|
|
module lo_simulate(
|
|
input pck0,
|
|
input ck_1356meg,
|
|
input ck_1356megb,
|
|
input [7:0] adc_d,
|
|
input [7:0] divisor,
|
|
input cross_hi,
|
|
input cross_lo,
|
|
input ssp_dout,
|
|
|
|
output ssp_din,
|
|
output ssp_frame,
|
|
output ssp_clk,
|
|
output adc_clk,
|
|
output pwr_lo,
|
|
output pwr_hi,
|
|
output pwr_oe1,
|
|
output pwr_oe2,
|
|
output pwr_oe3,
|
|
output pwr_oe4,
|
|
output debug
|
|
);
|
|
|
|
// No logic, straight through.
|
|
assign pwr_oe3 = 1'b0;
|
|
assign pwr_oe1 = ssp_dout;
|
|
assign pwr_oe2 = ssp_dout;
|
|
assign pwr_oe4 = ssp_dout;
|
|
assign ssp_clk = cross_lo;
|
|
assign pwr_lo = 1'b0;
|
|
assign pwr_hi = 1'b0;
|
|
assign debug = ssp_frame;
|
|
|
|
// Divide the clock to be used for the ADC
|
|
reg [7:0] pck_divider;
|
|
reg clk_state;
|
|
|
|
always @(posedge pck0)
|
|
begin
|
|
if(pck_divider == divisor[7:0])
|
|
begin
|
|
pck_divider <= 8'd0;
|
|
clk_state = !clk_state;
|
|
end
|
|
else
|
|
begin
|
|
pck_divider <= pck_divider + 1;
|
|
end
|
|
end
|
|
|
|
assign adc_clk = ~clk_state;
|
|
|
|
// Toggle the output with hysteresis
|
|
// Set to high if the ADC value is above 200
|
|
// Set to low if the ADC value is below 64
|
|
reg is_high;
|
|
reg is_low;
|
|
reg output_state;
|
|
|
|
always @(posedge pck0)
|
|
begin
|
|
if((pck_divider == 8'd7) && !clk_state) begin
|
|
is_high = (adc_d >= 8'd191);
|
|
is_low = (adc_d <= 8'd64);
|
|
end
|
|
end
|
|
|
|
always @(posedge is_high or posedge is_low)
|
|
begin
|
|
if(is_high)
|
|
output_state <= 1'd1;
|
|
else if(is_low)
|
|
output_state <= 1'd0;
|
|
end
|
|
|
|
assign ssp_frame = output_state;
|
|
|
|
endmodule
|
|
|