mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-11 10:14:34 +08:00
d19754567d
* .h include only the strict minimum for their own parsing * this forces all files to include explicitment their needs and not count on far streched dependencies * this helps Makefile to rebuild only the minimum * according to this rule, most standalone .h are now gone * big app.h is gone * remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway * all unrequired include were removed * split common/ into common/ (client+arm) and common_arm/ (os+bootloader) * bring zlib to common/ * bring stuff not really/not yet used in common back to armsrc/ or client/ * bring liblua into client/ * bring uart into client/ * move some portions of code around (dbprint, protocols,...) * rename unused files into *_disabled.[ch] to make it explicit * rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash * remove PrintAndLogDevice * move deprecated-hid-flasher from client to tools * Makefiles * treat deps in armsrc/ as in client/ * client: stop on warning (-Werror), same as for armsrc/ Tested on: * all standalone modes * Linux
80 lines
2.3 KiB
C
80 lines
2.3 KiB
C
#include "proxmark3_arm.h"
|
|
#include "BigBuf.h"
|
|
#include "fpgaloader.h"
|
|
#include "ticks.h"
|
|
#include "dbprint.h"
|
|
#include "util.h"
|
|
|
|
static void RAMFUNC optimizedSniff(void);
|
|
|
|
static void RAMFUNC optimizedSniff(void) {
|
|
int n = BigBuf_max_traceLen() / sizeof(uint16_t); // take all memory
|
|
|
|
uint16_t *dest = (uint16_t *)BigBuf_get_addr();
|
|
uint16_t *destend = dest + n - 1;
|
|
|
|
// Reading data loop
|
|
while (dest <= destend) {
|
|
if (AT91C_BASE_SSC->SSC_SR & AT91C_SSC_RXRDY) {
|
|
*dest = (uint16_t)(AT91C_BASE_SSC->SSC_RHR);
|
|
dest++;
|
|
}
|
|
}
|
|
//setting tracelen - important! it was set by buffer overflow before
|
|
set_tracelen(BigBuf_max_traceLen());
|
|
}
|
|
|
|
void HfSniff(int samplesToSkip, int triggersToSkip) {
|
|
BigBuf_free();
|
|
BigBuf_Clear();
|
|
|
|
Dbprintf("Skipping first %d sample pairs, Skipping %d triggers.\n", samplesToSkip, triggersToSkip);
|
|
int trigger_cnt = 0;
|
|
|
|
LED_D_ON();
|
|
|
|
FpgaDownloadAndGo(FPGA_BITSTREAM_HF);
|
|
|
|
SetAdcMuxFor(GPIO_MUXSEL_HIPKD);
|
|
|
|
// Set up the synchronous serial port
|
|
FpgaSetupSsc();
|
|
|
|
// Setting Frame Mode For better performance on high speed data transfer.
|
|
AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(16);
|
|
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_HF_SNOOP);
|
|
SpinDelay(100);
|
|
|
|
uint16_t r = 0;
|
|
while (!BUTTON_PRESS() && !data_available()) {
|
|
WDT_HIT();
|
|
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY)) {
|
|
r = (uint16_t)AT91C_BASE_SSC->SSC_RHR;
|
|
r = MAX(r & 0xff, r >> 8);
|
|
if (r >= 180) { // 0xB4 ??
|
|
if (++trigger_cnt > triggersToSkip)
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!BUTTON_PRESS()) {
|
|
int waitcount = samplesToSkip; // lets wait 40000 ticks of pck0
|
|
while (waitcount != 0) {
|
|
|
|
if (AT91C_BASE_SSC->SSC_SR & (AT91C_SSC_RXRDY))
|
|
waitcount--;
|
|
}
|
|
optimizedSniff();
|
|
Dbprintf("Trigger kicked! Value: %d, Dumping Samples Hispeed now.", r);
|
|
}
|
|
|
|
//Resetting Frame mode (First set in fpgaloader.c)
|
|
AT91C_BASE_SSC->SSC_RFMR = SSC_FRAME_MODE_BITS_IN_WORD(8) | AT91C_SSC_MSBF | SSC_FRAME_MODE_WORDS_PER_TRANSFER(0);
|
|
|
|
DbpString("HF Sniffing end");
|
|
FpgaWriteConfWord(FPGA_MAJOR_MODE_OFF);
|
|
LED_D_OFF();
|
|
}
|