mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-15 14:20:51 +08:00
76 lines
3.1 KiB
C
76 lines
3.1 KiB
C
//-----------------------------------------------------------------------------
|
|
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
|
|
//
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
//
|
|
// See LICENSE.txt for the text of the license.
|
|
//-----------------------------------------------------------------------------
|
|
#include "clocks.h"
|
|
#include "proxmark3_arm.h"
|
|
|
|
void mck_from_pll_to_slck(void) {
|
|
// switch main clk to slow clk, first CSS then PRES
|
|
AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_SLOW_CLK;
|
|
while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY)) {};
|
|
AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK | AT91C_PMC_CSS_SLOW_CLK;
|
|
while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY)) {};
|
|
|
|
// disable the PLL
|
|
AT91C_BASE_PMC->PMC_PLLR = 0x0;
|
|
|
|
// disable main oscillator
|
|
AT91C_BASE_PMC->PMC_MOR = 0;
|
|
}
|
|
|
|
void mck_from_slck_to_pll(void) {
|
|
// worst case scenario, with MAINCK = 16MHz xtal, startup delay is 1.4ms
|
|
// if SLCK slow clock runs at its worst case (max) frequency of 42kHz
|
|
// max startup delay = (1.4ms*42k)/8 = 7.356 so round up to 8
|
|
// UPDATE:
|
|
// we observed on 10% of the devices very wrong initial slow clock RC TIA measures.
|
|
// Bumping delay to 16 helps fixing the issue even on the most screwed RC.
|
|
|
|
// enable main oscillator and set startup delay
|
|
AT91C_BASE_PMC->PMC_MOR =
|
|
AT91C_CKGR_MOSCEN |
|
|
PMC_MAIN_OSC_STARTUP_DELAY(16);
|
|
|
|
// wait for main oscillator to stabilize
|
|
while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS)) {};
|
|
|
|
// PLL output clock frequency in range 80 - 160 MHz needs CKGR_PLL = 00
|
|
// PLL output clock frequency in range 150 - 180 MHz needs CKGR_PLL = 10
|
|
// PLL output is MAINCK * multiplier / divisor = 16MHz * 12 / 2 = 96MHz
|
|
AT91C_BASE_PMC->PMC_PLLR =
|
|
PMC_PLL_DIVISOR(2) |
|
|
//PMC_PLL_COUNT_BEFORE_LOCK(0x10) |
|
|
PMC_PLL_COUNT_BEFORE_LOCK(0x3F) |
|
|
PMC_PLL_FREQUENCY_RANGE(0) |
|
|
PMC_PLL_MULTIPLIER(12) |
|
|
PMC_PLL_USB_DIVISOR(1);
|
|
|
|
// wait for PLL to lock
|
|
while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK)) {};
|
|
|
|
// we want a master clock (MCK) to be PLL clock / 2 = 96MHz / 2 = 48MHz
|
|
// datasheet recommends that this register is programmed in two operations
|
|
// when changing to PLL, program the prescaler first then the source
|
|
AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_SLOW_CLK;
|
|
|
|
// wait for main clock ready signal
|
|
while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY)) {};
|
|
|
|
// set the source to PLL
|
|
AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2 | AT91C_PMC_CSS_PLL_CLK;
|
|
|
|
// wait for main clock ready signal
|
|
while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY)) {};
|
|
}
|