# Getting Started ## 1. Install the software Choose one of the following installation methods: ### Homebrew On macOS (or Linux) you can install it using [Homebrew](https://brew.sh). ```shell brew install dnscontrol ``` ### MacPorts Alternatively on macOS you can install it using [MacPorts](https://www.macports.org). ```shell sudo port install dnscontrol ``` ### Docker You can use DNSControl locally using the Docker image from [Docker hub](https://hub.docker.com/r/stackexchange/dnscontrol/) or [GitHub Container Registry](https://github.com/stackexchange/dnscontrol/pkgs/container/dnscontrol) and the command below. ```shell docker run --rm -it -v "$(pwd):/dns" ghcr.io/stackexchange/dnscontrol preview ``` ### Binaries Download binaries from [GitHub](https://github.com/StackExchange/dnscontrol/releases/latest) for Linux (binary, tar, RPM, DEB), FreeBSD (tar), Windows (exec, ZIP) for 32-bit, 64-bit, and ARM. ### Source DNSControl can be built from source with Go version 1.18 or higher. The `go install` command will download the source, compile it, and install `dnscontrol` in your `$GOBIN` directory. To install, simply run ```shell go install github.com/StackExchange/dnscontrol/v4@latest ``` To download the source ```shell git clone https://github.com/StackExchange/dnscontrol ``` If these don't work, more info is in [#805](https://github.com/StackExchange/dnscontrol/issues/805). ## 1.1. Shell Completion Shell completion is available for `zsh` and `bash`. ### zsh Add `eval "$(dnscontrol shell-completion zsh)"` to your `~/.zshrc` file. This requires completion to be enabled in zsh. A good tutorial for this is available at [The Valuable Dev](https://thevaluable.dev/zsh-completion-guide-examples/) ^{[[archived](https://web.archive.org/web/20231015083946/https://thevaluable.dev/zsh-completion-guide-examples/)]}. ### bash Add `eval "$(dnscontrol shell-completion bash)"` to your `~/.bashrc` file. This requires the `bash-completion` package to be installed. See [scop/bash-completion](https://github.com/scop/bash-completion/) for instructions. ## 2. Create a place for the config files Create a directory where you'll store your configuration files. We highly recommend storing these files in a Git repo, but for simple tests anything will do. Create a subdirectory called `zones` in the same directory as the configuration files. (`mkdir zones`). `zones` is where the BIND provider writes the zonefiles it creates. Even if you don't use BIND for DNS service, it is useful for testing. ## 3. Create the initial `dnsconfig.js` `dnsconfig.js` is the main configuration and defines providers, DNS domains, and so on. Start your `dnsconfig.js` file by downloading [dnsconfig.js](https://github.com/StackExchange/dnscontrol/blob/master/documentation/assets/getting-started/dnsconfig.js) and renaming it. The file looks like: {% code title="dnsconfig.js" %} ```javascript var REG_NONE = NewRegistrar("none"); var DNS_BIND = NewDnsProvider("bind"); D("example.com", REG_NONE, DnsProvider(DNS_BIND), A("@", "1.2.3.4") ); ``` {% endcode %} Modify this file to match your particular providers and domains. See [the DNSConfig docs](js.md) and [the provider docs](providers.md) for more details. Create a file called `creds.json` for storing provider configurations (API tokens and other account information). For example, to use both name.com and Cloudflare, you would have: {% code title="creds.json" %} ```json { "cloudflare": { // The provider name used in dnsconfig.js "TYPE": "CLOUDFLAREAPI", // The provider type identifier "accountid": "your-cloudflare-account-id", // credentials "apitoken": "your-cloudflare-api-token" // credentials }, "namecom": { // The provider name used in dnsconfig.js "TYPE": "NAMEDOTCOM", // The provider type identifier "apikey": "key", // credentials "apiuser": "username" // credentials }, "none": { "TYPE": "NONE" } // The no-op provider } ``` {% endcode %} Note: Do **not** store your `creds.json` file in Git unencrypted. That is unsafe. Add `creds.json` to your `.gitignore` file as a precaution. This file should be encrypted using something like [git-crypt](https://www.agwa.name/projects/git-crypt) or [Blackbox](https://github.com/StackExchange/blackbox). There are 2 types of providers: A "Registrar" is with whom you register the domain. Start with `NONE`, which is a provider that never talks to or updates the registrar. You can define your registrar later when you want to use advanced features. A "DnsProvider" is the service that actually provides DNS service (port 53) and may be the same or a different registrar. Even if both your Registrar and DnsProvider are the same company, two different definitions must be included in `dnsconfig.js`. ## 4. Create the initial `creds.json` `creds.json` stores credentials and a few global settings. It is only needed if any providers require credentials (API keys, usernames, passwords, etc.). Start your `creds.json` file by downloading [creds.json](https://github.com/StackExchange/dnscontrol/blob/master/documentation/assets/getting-started/creds.json) and renaming it. The file looks like: {% code title="creds.json" %} ```json { "bind": { "TYPE": "BIND" }, "r53_accountname": { "TYPE": "ROUTE53", "KeyId": "change_to_your_keyid", "SecretKey": "change_to_your_secretkey" } } ``` {% endcode %} Ignore the `r53_accountname` section. It is a placeholder and will be ignored. You can use it later when you define your first set of API credentials. Note that `creds.json` is a JSON file. JSON is very strict about commas and other formatting. There are a few different ways to check for typos: Python: ```shell python -m json.tool creds.json ``` jq: ```shell jq . < creds.json ``` FYI: `creds.json` fields can be read from an environment variable. The field must begin with a `$` followed by the variable name. No other text. For example: {% code title="creds.json" %} ```json { "apikey": "$GANDI_V5_APIKEY" } ``` {% endcode %} ## 5. Test the sample files Before you edit the sample files, verify that the system is working. First run `dnscontrol preview` and ensure it completes without error(s). The preview command is the "dry run" mode that shows only what changes need to be made and never makes any actual changes. It will use APIs if needed to find out what DNS entries currently exist. (All output assumes the `--full` flag) It should look something like this: ```shell dnscontrol preview ``` ```text Initialized 1 registrars and 1 dns service providers. ******************** Domain: example.com ----- Getting nameservers from: bind ----- DNS Provider: bind... 1 correction #1: GENERATE_ZONEFILE: example.com (2 records) ----- Registrar: none Done. 1 corrections. ``` Next, run `dnscontrol push` to actually make the changes. In this case, the change will be to create a zone file where one didn't previously exist. ```shell dnscontrol push ``` ```text Initialized 1 registrars and 1 dns service providers. ******************** Domain: example.com ----- Getting nameservers from: bind ----- DNS Provider: bind... 1 correction #1: GENERATE_ZONEFILE: example.com (2 records) CREATING ZONEFILE: zones/example.com.zone SUCCESS! ----- Registrar: none Done. 1 corrections. ``` ## 6. Make a change Try making a change to `dnsconfig.js`. For example, change the IP address of in `A("@", "1.2.3.4")` or add an additional A record. In our case, we changed the IP address to 10.10.10.10. Previewing our change looks like this: ```shell dnscontrol preview ``` ```text Initialized 1 registrars and 1 dns service providers. ******************** Domain: example.com ----- Getting nameservers from: bind ----- DNS Provider: bind... 1 correction #1: GENERATE_ZONEFILE: example.com MODIFY A example.com: (1.2.3.4 300) -> (10.10.10.10 300) ----- Registrar: none Done. 1 corrections. ``` Notice that it read the old zone file and was able to produce a "diff" between the old `A` record and the new one. If the zonefile didn't exist, the output would look different because the zone file was being created from scratch. Run `dnscontrol push` to see the system generate a new zone file. Other providers use an API to do updates. In those cases the individual changes will translate into API calls that update the specific records. Take a look at the `zones/example.com.zone` file. It should look like: ```text $TTL 300 @ IN SOA DEFAULT_NOT_SET. DEFAULT_NOT_SET. 1 3600 600 604800 1440 IN A 10.10.10.10 ``` You can change the "DEFAULT_NOT_SET" text by following the documentation for the [BIND provider](providers/bind.md) to set the "master" and "mbox" settings. Try that now. ## 7. Use your own domains Now that we know the system is working for test data, try controlling a real domain (or a test domain if you have one). Set up the provider: Add the providers's definition to `dnsconfig.js` and list any credentials in `creds.json`. Each provider is different. See [the provider docs](providers.md) for specifics. Edit the domain: Add the `D()` entry for the domain, or repurpose the `example.com` domain. Add individual `A()`, `MX()` and other records as needed. Remember that the first parameter to `D()` is always a Registrar. Run `dnscontrol preview` to test your work. It may take a few tries to list all the DNS records that make up the domain. When `preview` shows no changes required, then you know you are at record parity. The [Migrating](migrating.md) doc has advice about converting from other systems. You can manually create the `D()` statements, or you can generate them automatically using the [dnscontrol get-zones](get-zones.md) command to import the zone from (most) providers and output it as code that can be added to `dnsconfig.js` and used with very little modification. Now you can make changes to the domain(s) and run `dnscontrol preview` ## 8. Production Advice If you are going to use this in production, we highly recommend the following: * Store the configuration files in Git. * Encrypt the `creds.json` file before storing it in Git. Do NOT store API keys or other credentials without encrypting them. * Use a CI/CD tool like [GitLab](ci-cd-gitlab.md), Jenkins, CircleCI, [GitHub Actions](https://github.com/StackExchange/dnscontrol#via-github-actions-gha), etc. to automatically push DNS changes. * Join the DNSControl community. File [issues](https://github.com/StackExchange/dnscontrol/issues) and [PRs](https://github.com/StackExchange/dnscontrol/pulls).