==================== Server Installation ==================== This section outlines installing the Netmaker server, including Netmaker, Netmaker UI, MongoDB, and CoreDNS Notes on Optional Features ============================ There are a few key options to keep in mind when deploying Netmaker. All of the following options are enabled by default but can be disabled with a single flag at runtime (see Customization). In addition to these options, there are many more Customizable components which will be discussed later on and help to solve for special challenges and use cases. **Client Mode:** Client Mode enables Netmaker to control the underlying host server's Network. This can make management a bit easier, because Netmaker can be added into networks via a button click in the UI. This is especially useful for things like Gateways, and will open up additional options in future versions, for instance, allowing Netmaker to easily become a relay server. Client Mode requires many additional privileges on the host machine, since Netmaker needs to control kernel WireGuard. Because of this, if running in Client Mode, you must run with root privileges and mount many system directories to the Netmaker container. Running without Client Mode allows you to install without privilege escalation and increases the number of compatible systems substantially. **DNS Mode:** DNS Mode enables Netmaker to write configuration files for CoreDNS, which can be set as a DNS Server for nodes. DNS Mode, paired with a CoreDNS deployment, requires use of port 53. On many linux systems (such as Ubuntu), port 53 is already in use to support local DNS, via systemd-resolved. Running in DNS Mode may require making modifications on the host machine. **Agent Backend:** The Agent Backend is the GRPC server (by default running on port 50051). This port is not needed for the admin server. If your use case requires special access configuration, you can run two Netmaker instances, one for the admin server, and one for node access. **REST Backend:** Similar to the above, the REST backend runs by default on port 8081, and is used for admin API and UI access. By enabling the REST backend while disabling the Agent backend, you can separate the two functions for more restricted environments. System Compatibility ==================== Whether or not you run Netmaker in **Client Mode** is the main determination of system compatibility. With Client Mode **disabled**, Netmaker can be run on any system that supports Docker. This includes Windows, Mac, Linux, mainframes, and most Unix-based systems. It also requires no special privileges. Netmaker will only need ports for GRPC (50051 by default), the API (8081 by default), and CoreDNS (53, if enabled). With Client Mode **enabled** (the default), Netmaker has the same limitations as the :doc:`netclient <./client-installation>` (client networking agent), because client mode just means that the Netmaker server is also running a netclient. This requires privileged (root) access to the host machine and multiple host directory mounts. It also requires WireGuard to be installed, and Linux with systemd installed (see :doc:`compatible systems <./architecture>` for more details). To run a non-docker installation, you are running the Netmaker binary, CoreDNS binary, MongoDB, and a web server directly on your host. This requires all the requirements for those individual components. Our guided install assumes systemd-based linux, but there are many other ways to install Netmaker's individual components onto machines that do not support Docker. DNS Mode Prereqisite Setup ==================================== If you plan on running the server in DNS Mode, you will be deploying a CoreDNS server. We recommend binding CoreDNS to port 53 of the host system (which it will do by default). On some systems, this will conflift with existing processes. Specifically on linux systems running systemd-resolved, there may be a service consuming port 53. The below steps will disable systemd-resolved, and replace it with a generic (e.g. Google) nameserver. The following was tested on Ubuntu 20.04. This may have consequences for existing private DNS so proceed with caution: 1. ``systemctl stop systemd-resolved`` 2. ``systemctl disable systemd-resolved`` 3. ``vim /etc/systemd/resolved.conf`` * uncomment DNS and add 8.8.8.8 or whatever reachable nameserver is your preference * uncomment DNSStubListener and set to "no" 4. ``ln -sf /run/systemd/resolve/resolv.conf /etc/resolv.conf`` Port 53 should now be available for CoreDNS to use. Docker Compose Install ======================= The most simple (and recommended) way of installing Netmaker is to use one of the provided `Docker Compose files `_. Below are instructions for several different options to install Netmaker via Docker Compose, followed by an annotated reference Docker Compose in case your use case requires additional customization. Slim Install - No DNS and No Client Mode -------------------------------------------- This is the same docker compose covered in the :doc:`quick start <./quick-start>`. It requires no special privileges and can run on any system with Docker and Docker Compose. However, it also does not have the full feature set, and lacks Client Mode and DNS Mode. **Prerequisites:** * ports 80, 8081, and 50051 are not blocked by firewall * ports 80, 8081, 50051, and 27017 are not in use **Notes:** * You can still run the netclient on the host system even if Client Mode is not enabled. It will just be managed like the netclient on any other nodes, and will not be automatically managed by thhe server/UI. * You can change the port mappings in the Docker Compose if the listed ports are already in use. Assuming you have Docker and Docker Compose installed, you can just run the following, replacing **< Insert your-host IP Address Here >** with your host IP (or domain): #. ``wget -O docker-compose.yml https://raw.githubusercontent.com/gravitl/netmaker/master/scripts/docker-compose.slim.yml`` #. ``sed -i ‘s/HOST_IP/< Insert your-host IP Address Here >/g’ docker-compose.yml`` #. ``docker-compose up -d`` Full Install - DNS and Client Mode Enabled -------------------------------------------- This installation gives you the fully-featured product with Client Mode and DNS Mode. **Prerequisites:** * systemd linux (Debian or Ubuntu reccommended) * sudo privileges * DNS Mode Prerequisite Setup (see above) * WireGuard installed * ports 80, 8081, 53, and 50051 are not blocked by firewall * ports 80, 8081, 53, 50051, and 27017 are not in use **Notes:** * You can change the port mappings in the Docker Compose if the listed ports are already in use. * You can run CoreDNS on a non-53 port, but this likely will cause issues on the client side (DNS on non-standard port). We do not recommend this and do not cover how to manage running CoreDNS on a different port for clients, which will likely have problems resolving a nameserver on a non-53 port. Assuming you have Docker and Docker Compose installed, you can just run the following, replacing **< Insert your-host IP Address Here >** with your host IP (or domain): #. ``sudo su -`` #. ``wget -O docker-compose.yml https://raw.githubusercontent.com/gravitl/netmaker/master/scripts/docker-compose.yml`` #. ``sed -i ‘s/HOST_IP/< Insert your-host IP Address Here >/g’ docker-compose.yml`` #. ``docker-compose up -d`` Server Only Install - UI, DNS, Client Disabled ------------------------------------------------ A "Server Only" install can be helpful for scenarios in which you do not want to run the UI. the UI is not mandatory for running a Netmaker network, but it makes the process easier. This mode also diables DNS and Client Modes, though you can add those back in if needed. There is no UI dependency on Client Mode or DNS Mode. **Prerequisites:** * ports 8081 and 50051 are not blocked by firewall * ports 8081, 50051, and 27017 are not in use **Notes:** * You can still run the netclient on the host system even if Client Mode is not enabled. It will just be managed like the netclient on any other nodes, and will not be automatically managed by thhe server/UI. * You can change the port mappings in the Docker Compose if the listed ports are already in use. Assuming you have Docker and Docker Compose installed, you can just run the following, replacing **< Insert your-host IP Address Here >** with your host IP (or domain): #. ``wget -O docker-compose.yml https://raw.githubusercontent.com/gravitl/netmaker/master/scripts/docker-compose.server-only.yml`` #. ``sed -i ‘s/HOST_IP/< Insert your-host IP Address Here >/g’ docker-compose.yml`` No DNS - CoreDNS Disabled, Client Enabled ---------------------------------------------- DNS Mode is currently limited to clients that can run resolvectl (systemd-resolved, see :doc:`Architecture docs <./architecture>` for more info). You may wish to disable DNS mode for various reasons. This installation option gives you the full feature set minus CoreDNS. **Prerequisites:** * systemd linux (Debian or Ubuntu reccommended) * sudo privileges * WireGuard installed * ports 80, 8081, and 50051 are not blocked by firewall * ports 80, 8081, 50051, and 27017 are not in use **Notes:** * You can change the port mappings in the Docker Compose if the listed ports are already in use. * If you would like to run DNS Mode, but disable it on some clients, this is also an option. See the :doc:`client installation <./client-installation>` documentation for more details. Assuming you have Docker and Docker Compose installed, you can just run the following, replacing **< Insert your-host IP Address Here >** with your host IP (or domain): #. ``wget -O docker-compose.yml https://raw.githubusercontent.com/gravitl/netmaker/master/scripts/docker-compose.nodns.yml`` #. ``sed -i ‘s/HOST_IP/< Insert your-host IP Address Here >/g’ docker-compose.yml`` No DNS - CoreDNS Disabled, Client Enabled No Client - DNS Enabled, Client Disabled --------------------------------------------- You may want to provide DNS, but do not want to run the server with special privileges, in which case you can run with just Client Mode disabled. It requires no special privileges and can run on any system with Docker and Docker Compose. **Prerequisites:** * ports 80, 8081, 53, and 50051 are not blocked by firewall * ports 80, 8081, 53, 50051, and 27017 are not in use * DNS Mode Prerequisite Setup (see above) **Notes:** * You can still run the netclient on the host system even if Client Mode is not enabled. It will just be managed like the netclient on any other nodes, and will not be automatically managed by thhe server/UI. * You can change the port mappings in the Docker Compose if the listed ports are already in use. Assuming you have Docker and Docker Compose installed, you can just run the following, replacing **< Insert your-host IP Address Here >** with your host IP (or domain): #. ``wget -O docker-compose.yml https://raw.githubusercontent.com/gravitl/netmaker/master/scripts/docker-compose.noclient.yml`` #. ``sed -i ‘s/HOST_IP/< Insert your-host IP Address Here >/g’ docker-compose.yml`` #. ``docker-compose up -d`` Reference Compose File - Annotated -------------------------------------- All environment variables and options are enabled in this file. It is the equivalent to running the "full install" from the above section. However, all environment variables are included, and are set to the default values provided by Netmaker (if the environment variable was left unset, it would not change the installation). Comments are added to each option to show how you might use it to modify your installation. .. literalinclude:: ../compose/docker-compose.reference.yml :language: YAML Linux Install without Docker ============================= Most systems support Docker, but some, such as LXC, do not. In such environments, there are many options for installing Netmaker. Netmaker is available as a binary file, and there is a zip file of the Netmaker UI static HTML on GitHub. Beyond the UI and Server, you need to install MongoDB and CoreDNS (optional). Below is a guided set of instructions for installing without Docker on Ubuntu 20.04. Depending on your system, the steps may vary. MongoDB Setup ---------------- 1. Install MongoDB on your server: * For Ubuntu: `sudo apt install -y mongodb` * For more advanced installation or other operating systems, see the `MongoDB documentation `_. 2. Create a user: * ``mongo admin`` * > `db.createUser({ user: "mongoadmin" , pwd: "mongopass", roles: ["userAdminAnyDatabase", "dbAdminAnyDatabase", "readWriteAnyDatabase"]})` Server Setup ------------- 1. **Run the install script:** ``sudo curl -sfL https://raw.githubusercontent.com/gravitl/netmaker/v0.3.5/scripts/netmaker-server.sh | sh -`` 2. Check status: ``sudo journalctl -u netmaker`` 3. If any settings are incorrect such as host or mongo credentials, change them under /etc/netmaker/config/environments/< your env >.yaml and then run ``sudo systemctl restart netmaker`` UI Setup ----------- The following uses NGinx as an http server. You may alternatively use Apache or any other web server that serves static web files. 1. **Download UI asset files:** ``sudo wget -O /usr/share/nginx/html/netmaker-ui.zip https://github.com/gravitl/netmaker-ui/releases/download/latest/netmaker-ui.zip`` 2. **Unzip:** ``sudo unzip /usr/share/nginx/html/netmaker-ui.zip -d /usr/share/nginx/html`` 3. **Copy Config to Nginx:** ``sudo cp /usr/share/nginx/html/nginx.conf /etc/nginx/conf.d/default.conf`` 4. **Modify Default Config Path:** ``sudo sed -i 's/root \/var\/www\/html/root \/usr\/share\/nginx\/html/g' /etc/nginx/sites-available/default`` 5. **Change Backend URL:** ``sudo sh -c 'BACKEND_URL=http://:PORT /usr/share/nginx/html/generate_config_js.sh >/usr/share/nginx/html/config.js'`` 6. **Start Nginx:** ``sudo systemctl start nginx`` CoreDNS Setup ---------------- Kubernetes Install ======================= **This configuration is coming soon.** It will allow you to deploy Netmaker on a Kubernetes cluster. Configuration Reference ========================= The "Reference Compose File" (above) explains many of these options. However, it is important to understand fundamentally how Netmaker sets its configuration: 1. Defaults 2. Config File 3. Environment Variables Variable Description ---------------------- SERVER_HOST: **Default:** Server will perform an IP check and set automatically unless explicitly set, or DISABLE_REMOTE_IP_CHECK is set to true, in which case it defaults to 127.0.0.1 **Description:** Sets the SERVER_HTTP_HOST and SERVER_GRPC_HOST variables if they are unset. The address where traffic comes in. SERVER_HTTP_HOST: **Default:** Equals SERVER_HOST if set, "127.0.0.1" if SERVER_HOST is unset. **Description:** Set to make the HTTP and GRPC functions available via different interfaces/networks. SERVER_GRPC_HOST: **Default:** Equals SERVER_HOST if set, "127.0.0.1" if SERVER_HOST is unset. **Description:** Set to make the HTTP and GRPC functions available via different interfaces/networks. API_PORT: **Default:** 8081 **Description:** The HTTP API port for Netmaker. Used for API calls / communication from front end. GRPC_PORT: **Default:** 50051 **Description:** The GRPC port for Netmaker. Used for communications from nodes. MASTER_KEY: **Default:** "secretkey" **Description:** The admin master key for accessing the API. Change this in any production installation. CORS_ALLOWED_ORIGIN: **Default:** "*" **Description:** The "allowed origin" for API requests. Change to restrict where API requests can come from. REST_BACKEND: **Default:** "on" **Description:** Enables the REST backend (API running on API_PORT at SERVER_HTTP_HOST). Change to "off" to turn off. AGENT_BACKEND: **Default:** "on" **Description:** Enables the AGENT backend (GRPC running on GRPC_PORT at SERVER_GRPC_HOST). Change to "off" to turn off. CLIENT_MODE: **Default:** "on" **Description:** Enables Client Mode, meaning netclient will be deployed on server and will be manageable from UI. Change to "off" to turn off. DNS_MODE: **Default:** "on" **Description:** Enables DNS Mode, meaning config files will be generated for CoreDNS. DISABLE_REMOTE_IP_CHECK: **Default:** "off" **Description:** If turned "on", Server will not set Host based on remote IP check. This is already overridden if SERVER_HOST is set. Turned "off" by default. MONGO_ADMIN: **Default:** "mongoadmin" **Description:** Admin user for MongoDB. MONGO_PASS: **Default:** "mongopass" **Description:** Admin password for MongoDB. MONGO_HOST: **Default:** "127.0.0.1" **Description:** Address of MongoDB. MONGO_PORT: **Default:** "27017" **Description:** Port of MongoDB. MONGO_OPTS: **Default:** "/?authSource=admin" **Description:** Opts to enable admin login for Mongo. Config File Reference ---------------------- A config file may be placed under config/environments/.yml. To read this file at runtime, provide the environment variable ENV at runtime. For instance, dev.yml paired with ENV=dev. Netmaker will load the specified Config file. This allows you to store and manage configurations for different environments. Below is a reference Config File you may use. .. literalinclude:: ../config/environments/dev.yaml :language: YAML