mirror of
https://github.com/gravitl/netmaker.git
synced 2024-09-21 15:56:07 +08:00
65 lines
4.2 KiB
YAML
65 lines
4.2 KiB
YAML
services:
|
|
rqlite:
|
|
container_name: rqlite
|
|
image: rqlite/rqlite
|
|
network_mode: host
|
|
restart: always
|
|
volumes:
|
|
- sqldata:/rqlite/file/data
|
|
netmaker: # The Primary Server for running Netmaker
|
|
privileged: true # Necessary to run sudo/root level commands on host system. Take out if not running with CLIENT_MODE=on
|
|
container_name: netmaker
|
|
depends_on:
|
|
- rqlite
|
|
image: gravitl/netmaker:v0.9.4
|
|
volumes: # Volume mounts necessary for CLIENT_MODE to control wireguard networking on host (except dnsconfig, which is where dns config files are stored for use by CoreDNS)
|
|
- dnsconfig:/root/config/dnsconfig # Netmaker writes Corefile to this location, which gets mounted by CoreDNS for DNS configuration.
|
|
- /usr/bin/wg:/usr/bin/wg
|
|
cap_add: # Necessary for CLIENT_MODE. Should be removed if turned off.
|
|
- NET_ADMIN
|
|
restart: always
|
|
network_mode: host # Necessary for CLIENT_MODE. Should be removed if turned off, but then need to add port mappings
|
|
environment:
|
|
SERVER_HOST: "" # All the Docker Compose files pre-populate this with HOST_IP, which you replace as part of the install instructions. This will set both HTTP and GRPC host.
|
|
SERVER_HTTP_HOST: "127.0.0.1" # Overrides SERVER_HOST if set. Useful for making HTTP and GRPC available via different interfaces/networks.
|
|
SERVER_GRPC_HOST: "127.0.0.1" # Overrides SERVER_HOST if set. Useful for making HTTP and GRPC available via different interfaces/networks.
|
|
API_PORT: 8081 # The HTTP API port for Netmaker. Used for API calls / communication from front end. If changed, need to change port of BACKEND_URL for netmaker-ui.
|
|
GRPC_PORT: 50051 # The GRPC port for Netmaker. Used for communications from nodes.
|
|
CLIENT_MODE: "on" # on if netmaker should run its own client, off if not.
|
|
MASTER_KEY: "secretkey" # The admin master key for accessing the API. Change this in any production installation.
|
|
CORS_ALLOWED_ORIGIN: "*" # The "allowed origin" for API requests. Change to restrict where API requests can come from.
|
|
REST_BACKEND: "on" # Enables the REST backend (API running on API_PORT at SERVER_HTTP_HOST). Change to "off" to turn off.
|
|
AGENT_BACKEND: "on" # Enables the AGENT backend (GRPC running on GRPC_PORT at SERVER_GRPC_HOST). Change to "off" to turn off.
|
|
DNS_MODE: "on" # Enables DNS Mode, meaning config files will be generated for CoreDNS. Note, turning "off" does not remove CoreDNS. You still need to remove CoreDNS from compose file.
|
|
DISABLE_REMOTE_IP_CHECK: "off" # If turned "on", Server will not set Host based on remote IP check. This is already overridden if SERVER_HOST is set. Turned "off" by default.
|
|
GRPC_SSL: "off" # Tells clients to use SSL to connect to GRPC. Switch to on to turn on.
|
|
COREDNS_ADDR: "" # Address of the CoreDNS server. Defaults to SERVER_HOST
|
|
DISPLAY_KEYS: "on" # Show keys permanently in UI (until deleted) as opposed to 1-time display.
|
|
SERVER_API_CONN_STRING: "" # Changes the api connection string. IP:PORT format. By default is empty and uses SERVER_HOST:API_PORT
|
|
SERVER_GRPC_CONN_STRING: "" # Changes the grpc connection string. IP:PORT format. By default is empty and uses SERVER_HOST:GRPC_PORT
|
|
RCE: "off" # Enables setting PostUp and PostDown (arbitrary commands) on nodes from the server. Off by default.
|
|
netmaker-ui: # The Netmaker UI Component
|
|
container_name: netmaker-ui
|
|
depends_on:
|
|
- netmaker
|
|
image: gravitl/netmaker-ui:v0.9.3
|
|
links:
|
|
- "netmaker:api"
|
|
ports:
|
|
- "8082:80"
|
|
environment:
|
|
BACKEND_URL: "http://HOST_IP:8081" # URL where UI will send API requests. Change based on SERVER_HOST, SERVER_HTTP_HOST, and API_PORT
|
|
coredns: # The DNS Server. Remove this section if DNS_MODE="off"
|
|
depends_on:
|
|
- netmaker
|
|
image: coredns/coredns
|
|
command: -conf /root/dnsconfig/Corefile # Config location for Corefile. This is the path of file which is also mounted to Netmaker for modification.
|
|
container_name: coredns
|
|
restart: always
|
|
ports:
|
|
- "53:53/udp" # Likely needs to run at port 53 for adequate nameserver usage.
|
|
volumes:
|
|
- dnsconfig:/root/dnsconfig
|
|
volumes:
|
|
sqldata: {}
|
|
dnsconfig: {} |