* fix 'hf 15 csetuid'
* check for error codes, prevent client crash
* some include file refactoring
* some whitespace fixes
* allow longer timeout for write commands
* add function to send EOF only
* modify 'hf list 15' to display "<EOF>"
* add tracing of Reader commands
* if REQ_OPTION is set on write commands, send separate EOF to request tag response
* use #defines instead of hex constants
* switch off field after UID update
* return last tag response (if there is any)
* iso15693: decode WRITE_MULTI_BLOCK in 'hf list 15'
* code deduplication. Use functions from iso15693.c
* speedup CodeIso15693AsReader()
* invert reader command coding. 0 now means 'unmodulated' ( = field on)
* decode SOF only as a valid tag response in Handle15693SamplesFromTag()
* complete decoding of EOF in Handle15693SamplesFromTag()
* determine and write correct times to trace
* FPGA-change: generate shorter frame signal to allow proper sync in StartCountSspClk()
* modify StartCountSspClk() for 16bit SSC transfers
* whitespace in util.c
* add specific LogTrace_ISO15693() with scaled down duration. Modify cmdhflist.c accordingly.
* allow 'hf 15 raw' with single byte commands
* check for buffer overflow, card timeout and single SOF in 'hf 15 raw'
* fixing hf 15: implement hf 15 snoop
* rename hf 15 record to hf 15 snoop
* speedup sampling / decoding:
* new FPGA mode FPGA_HF_READER_RX_XCORR_AMPLITUDE implements amplitude(ci, cq) on FPGA
* inlining the decoders in iso15693.c
* inlining memcpy/memset in LogTrace()
* giving up the moving correlator for SOF in Handle15693SamplesFromTag
* decode more of EOF in Handle15693SamplesFromTag()
* some refactoring
* added ISO15693 coding for tag messages (CodeIso15693AsTag())
* added ISO15693 decoding for reader commands (Handle15693SampleFromReader())
* send tag inventory response in either high or low speed
* some refactoring and formatting
* implement a real time Decoder for tag responses (will be required for sniffing)
* switch off field after each command (protect rdv40)
* correctly signal field status with LED D
* ISO15693 device side improvements
* increase accuracy by doubling the sample frequency (hi_read_rx_xcorr.v)
* adjust armsrc/iso15693.c and client/cmdhf15.c accordingly
* use more accurate approximation for sqrt(ci^2 + cq^2)
* improve EOF detection (was often mistaken for Logic0, resulting in "error, uneven octet! (extra bits!)")
* hi_read_r_xcorr.v: avoid overflows during accumulation and truncation
* explicitely cast unsigned ADC samples to signed
* make uart_communication(), storeCommand() and getCommand() static in comms.c
* move receiver thread creation and respective mutexes to comms.c
* add mutex and signal for tx buffer
* use comms.c for flasher as well
* remove comm functions from client/proxmark3.h
* this completes isolating all USB communication related functions in comms.c
* don't assume a port to be defined by a name. Change parameter in OpenProxmark() to void*
* comms.c: set sp and serial_port_name to NULL when offline
* this should fix crashes reported in issue #497
* don't allow receiver thread to write directly into arbitrary main thread's memory
* instead use cmdBuffer[] for CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K as well
* add timeout and warning options to GetFromBigBuf(), same as in WaitForResponseTimeoutW()
* move GetFromBigBuf() from data.c to comms.c
* remove data.c and data.h
ADD: added a manufacturer list in "hf 14a reader", only viable when UID is double or triple size. Thanks to Asper for the list.
ADD: detect chinese magic backdoor commands in "hf 14a reader"
CHG: minor code clean up.
CHG: USB_CMD_DATA_SIZE is now used as maxsize for transfer of data between client and pm3device
CHG: suggested a fix for the underscore problem in ioclass\fileutils.c
ADD: tnp3xx support
ADD: nxp tag idents.
ADD: identifiction of chinese backdoor commands to hf 14a reader.
Next Step is refactoring some of the giant functions which are
just copy/paste of some other ones with just a few line changes,
removing unnecessary 'goto' etc.
The MS Windows version is broken with this commit but will be fixed
soon. Everything can't be done all at once :P
The commands are now hierarchical, for example:
"hf 14a read" vs. "hf 14b read".
You can also request help:
"hf help", "data help", "hf 15 help" etc.
Indents are now space-based, not tab-based anymore. Hopefully
no one will be trolling about it, considering the suicide-prone work
being done here ;)
client/cmdhw.c, client/proxusb.c, client/cmdhw.h, client/proxusb.h,
client/cmdmain.c, client/cmdlfhid.c, client/cmdmain.h, client/cmdlfhid.h,
client/data.c, client/data.h, client/cmdhf.c, client/cmdlf.c,
client/cmdhf.h, client/cmdhf15.c, client/cmdhf14b.c, client/cmdlf.h,
client/cmdhf15.h, client/cmdhf14b.h, client/cmddata.c, client/cmddata.h,
client/ui.c, client/cmdparser.c, client/cmdlfti.c, client/ui.h,
client/cmdlfem4x.c, client/cmdparser.h, client/cmdlfti.h, client/cmdlfem4x.h,
client/graph.c, client/graph.h, client/cmdhf14a.c, client/cmdhf14a.h,
client/cmdhflegic.c, client/cmdhflegic.c: New files.
client/cli.c, client/flasher.c, client/snooper.c, client/proxmark3.c,
client/proxmark3.h, client/Makefile: Update accordingly.
client/flash.h, client/flash.c, client/proxgui.cpp: Cosmetic changes.
client/translate.h, client/command.c, client/gui.c,
client/usb.c, client/prox.h: Remove.
include/usb_cmd.h (CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443_SIM): Remove dead cmd.
common/crc16.h: New file.
common/crc16.c: Modify accordingly.
common/iso14443crc.h: New file.
common/iso14443_crc.c: Rename to
common/iso14443crc.c: and modify accordingly.
armsrc/lfops.c, armsrc/iso14443.c,
armsrc/iso14443a.c: include .h files from
the common directory instead of including the c files.
common/Makefile.common, armsrc/Makefile: Modify accordingly.