fix: reduce length of expected unmodulated signal in Miller decoder in order
to allow decoding of NFC reader communications
add: hf list nfc: aggregate reader commands into one line
add: hf list nfc: CRC check for NFC communications
- hf 14a reader now exits gracefully in case of proprietary anticollision sequence
- changed miller decoder to handle Topaz 8 data bits/no parity frames from reader
- started to implement hf list topaz
In Miller Decoder: don't wait too long for a stable signal
In Miller Decoder: Don't accept sequences of four or more zeroes as start bit
In EmSendCmd14443aRaw: don't wait for emptying the FPGA delay queue if it isn't filled
- provided a BigBuf_malloc() function to dynamically allocate parts of BigBuf
e.g. for DMA-Buffers, Frame-Buffers, Emulator-Memory
- the whole rest of BigBuf is now available for traces (instead of a small fixed amount)
- send actual traceLen together with trace data
- changed client side to cope with varying traceLen
- changed small buffers to automatic variables instead of parts of BigBuf
ADD: added a manufacturer list in "hf 14a reader", only viable when UID is double or triple size. Thanks to Asper for the list.
ADD: detect chinese magic backdoor commands in "hf 14a reader"
CHG: minor code clean up.
CHG: USB_CMD_DATA_SIZE is now used as maxsize for transfer of data between client and pm3device
CHG: suggested a fix for the underscore problem in ioclass\fileutils.c
ADD: tnp3xx support
ADD: nxp tag idents.
ADD: identifiction of chinese backdoor commands to hf 14a reader.
- introduced with the big frame and parity support (commit 6a1f2d82): tag responses with len%8 == 0 were dropped - thanks iceman for testing and finding
- after unsuccessful hf 14a reader the field stayed on. Thanks to iceman for proposing the fix.
- buffers were too small to handle 256 byte frames
- parity bits were only handled for up to 32 byte frames
- trace format was inefficient
- removed parity calculation from decoders in iclass.c (parity not used on air anyway)
- output of debug messages caused communication failures due to timing issues.
hf mf dbg 4 now required to see these debug messages.
- changed help text for hf mf dbg
- fixed minor bugs in help texts for hf mf sim and hf mf ecset
- display "key A" or "key B" instead of "key=0" or "key=1 in hf mf sim
- tracing was not always enabled when starting hf mf sniff or hf 14a snoop
- ATQA was displayed in wrong byte order in hf mf sniff
- 4 Byte UIDs were displayed as 7 Byte UIDs (padded with 0x000000) in hf mf sniff
- same for logfile names.
- assignment (=) had been used instead of == in comparisons (shouldn't have been relevant though)
- fixed a circular buffer rollover bug in iso14443a.c
- fixed 7 Byte UID handling in hf mf sniff
- fixed "cannot append" error in hf mf sniff d
- fixed hint on mfkey32 in hf mf sim x
- fixed hf mf sniff sometimes showing rogue data from previous calloc
- improve snooping/sniffing by syncing modulation detector window with reader signal (hi_iso14443a.v)
- code cleanup of hi_iso14443a.v
- enhanced tracing: hf 14a list now shows meaningful timing information. With new option f it also shows the frame delay times (fdt)
- small fix for hf 14b list - it used to run into the trace trailer
- hf 14a sim now obeys iso14443 timing (fdt of 1172 or 1234 resp.)
Note: you need to flash FPGA as well.
More details in http://www.proxmark.org/forum/viewtopic.php?pid=9721#p9721
- PM: used GetCountMifare in MifareNested() for improved timing accuracy and to deliver better quality nonces
- PM: MifareNested now delivers exactly two different nonces to avoid time consuming multiple lfsr_recovery32() on client side
- Client: replaced quicksort by bucketsort in crapto1.c which is faster
- Client: use multithreading (two parallel calls to lfsr_recovery32())
- Client: fixed a small bug in mfnested() (always showed trgkey=0)
- Client: introduced a mutex for PrintAndLog() to avoid interlaced printing
Minor rework of hf mf chk:
- Avoid time consuming off/on cycles. Send a "halt" instead.
