* add "samples to skip" for lf config (mainly for lf snoop)
* add lf em 4x05protect command to write protection on em4x05 chips
* fix spacing
* and remove old comment git added back in..
* update changelog
* fix flags - only need 1 bit
Changes :
- Added t55xx downlink protocols (long leading reference, leading 0 and 1 of 4)
- Added function to all read to call differnet downlink functions (to match write)
- Update functions to support using differnet downlink modes.
- Added support for calling downlink modes for lf t55 read, write and detect
- Added new function lf t55 bruteforcedl to support downlink modes as well as try each mode
for each password in password file.
for functions with downlink mode extenstion.
e <mode> - OPTIONAL downlink encoding '0' fixed-bit-length (default),
'1' Long Zero Reference,
'2' Leading Zero,
'3' 1 of 4
* chg: write new dump file format by @mceloff
* chg: rename 'hf mfu dump' option 'n' to 'f' to align with other commands and RRG repo
* chg: replace ISO14443A_CMD_READBLOCK by MIFARE_CMD_READBLOCK, same for WRITEBLOCK
* fix: mifare_ultra_readblock() returned 14 bytes instead of 16
* chg: param_gethex_ex() now checks maximum output buffer length
* chg: ul_comp_write() was incomplete and for magic testing only
* fix: 16bit ULC counter had been displayed as 32bit
* chg: add check for 7 Byte UID, drop check for ATQA in type identification GetHF14AMfU_Type()
* fix: send HALT instead of dropping field in order to maintain a defined state
* chg: DropField() when command ends
* chg: check for invalid page ranges in 'hf mfu dump'
* fix: print correct lock bits when page range is used
* fix: do not write (incomplete) dumpfile when page range is used
* add: use UID for filename when no filename is given (RRG repo)
* chg: don't clear trace on each ULC authentication, clear trace at beginning of each command
* fix: don't send (DESFire?) deselect command after authentication
* fix parity encryption (thanks to Eloff, http://www.proxmark.org/forum/viewtopic.php?id=6347)
* add support to simulate Mifare Mini, Mifare 2K and Mifare 4K
* change to standard LED handling (A: PM is working, B: reader is sending, C: tag is responding, D: HF field is on)
* NAK on unknown commands
* allow unencrypted HALT
* don't display messages during simulation (or we will miss next reader command)
* use DMA to receive reader command
* switch earlier from send to listen mode
* move ADC initializer to iso14443_setup
* remove remainders of incomplete Mifare 10Byte UID simulation
* show 'short' bytes (7Bits or 8Bits without parity) in 'hf list mf' and 'hf list 14a'
* whitespace
* merge hf_rx_xcorr and hf_tx modes into one module with common ssp_clk and ssp_frame
* get rid of most of the warnings when compiling the HF verilog sources
* refactoring the constants in Verilog sources
* Add raw HF signal plotting
* new fpga module hi_get_trace.v - store A/D converter output to circular buffer on FPGA
* new command 'hf plot' - pull data from FPGA and display it in Graph Window