Users of macOS Ventura Beta can no longer use Xcode versions lower than 14.0. (*Technically* they can by `Show Package Contents` and running `/Contents/MacOS/Xcode` but this is not recommended or recognized by Brew installations)
Therefore you need to download Xcode 14.0 Beta and open it to install the correct Command Line Tools. (https://developer.apple.com/download/all/)
Important: you need to rename `Xcode-beta.app` to `Xcode.app` (Note: If you still need Xcode 13.0 for signing and uploading apps to App Store rename `Xcode.app` to `Xcode-2.app`).
Homebrew has changed their prefix to differentiate between native Apple Silicon and Intel compiled binaries. The Makefile attempts to account for this but please note that
whichever terminal or application you're using must be running under Architecture "Apple" as seen by Activity Monitor as all child processes inherit the Rosetta 2 environment of their parent. You can check which architecture you're currently running under with a `uname -m` in your terminal.
Visual Studio Code still runs under Rosetta 2 and if you're developing for proxmark3 on an Apple Silicon Mac you might want to consider running the Insiders build which has support for running natively on Apple Silicon.
-`brew install --HEAD --with-generic proxmark3`: for generic (non-RDV4) devices ([platform](https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/md/Use_of_Proxmark/4_Advanced-compilation-parameters.md#platform)), latest non-stable from GitHub (use this if previous command fails)
*This method is useful for those looking to run bleeding-edge versions of iceman's fork. Keep this in mind when attempting to update your HomeBrew tap formula as this procedure could easily cause a build to break if an update is unstable on macOS.*
With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark3 as you plug it into a USB port. You can release the button, two of the four LEDs should stay on. You're in bootloader mode, ready for the next step. In case the two LEDs don't stay on when you're releasing the button, you've an old bootloader, start over and keep the button pressed during the whole flashing procedure.
> Depending on the firmware version your Proxmark3 can also appear as:
> `/dev/tty.usbmodem881`
When compiling and you didn't flash the device, the client will now warn that you have a full image that doesn't match the source code of your client. If you know what you are doing, you can ignore it.
These instructions will show how to setup the environment on OSX to the point where you'll be able to clone and compile the repo by yourself, as on Linux, Windows, etc.
1. Install homebrew if you haven't yet already done so: http://brew.sh/
With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark3 as you plug it into a USB port. You can release the button, two of the four LEDs should stay on. You're in bootloader mode, ready for the next step. In case the two LEDs don't stay on when you're releasing the button, you've an old bootloader, start over and keep the button pressed during the whole flashing procedure.
