* .h include only the strict minimum for their own parsing
* this forces all files to include explicitment their needs and not count on far streched dependencies
* this helps Makefile to rebuild only the minimum
* according to this rule, most standalone .h are now gone
* big app.h is gone
* remove seldom __cplusplus, if c++ happens, everything will have to be done properly anyway
* all unrequired include were removed
* split common/ into common/ (client+arm) and common_arm/ (os+bootloader)
* bring zlib to common/
* bring stuff not really/not yet used in common back to armsrc/ or client/
* bring liblua into client/
* bring uart into client/
* move some portions of code around (dbprint, protocols,...)
* rename unused files into *_disabled.[ch] to make it explicit
* rename soft Uarts between 14a, 14b and iclass, so a standalone could use several without clash
* remove PrintAndLogDevice
* move deprecated-hid-flasher from client to tools
* Makefiles
* treat deps in armsrc/ as in client/
* client: stop on warning (-Werror), same as for armsrc/
Tested on:
* all standalone modes
* Linux
This is a new LF edge detection algorithm for the FPGA.
- It uses a low-pass IIR filter to clean the signal
(see https://fail0verflow.com/blog/2014/proxmark3-fpga-iir-filter.html)
- The algorithm is able to detect consecutive peaks in the same
direction
- It uses an envelope follower to dynamically adjust the peak thresholds
- The main threshold used in the envelope follower can be set from the ARM side
fpga/lf_edge_detect.v,
fpga/lp20khz_1MSa_iir_filter.v,
fpga/min_max_tracker.v: New file.
fpga/lo_edge_detect.v, fpga/fpga_lf.v: Modify accordingly.
armsrc/apps.h (FPGA_CMD_SET_USER_BYTE1,
FPGA_CMD_SET_EDGE_DETECT_THRESHOLD): New FPGA command.
fpga/fpga_lf.v: Modify accordingly/Add a 8bit user register.
fpga/fpga_lf.bit: Update accordingly.
fpga/tests: New directory for testbenches
fpga/tests/Makefile: New file. It compiles the testbenches
and runs all the tests by default (comparing with the golden output)
fpga/tests/tb_lp20khz_1MSa_iir_filter.v,
fpga/tests/tb_min_max_tracker.v,
fpga/tests/tb_lf_edge_detect.v: New testbenches
fpga/tests/plot_edgedetect.py: New script to plot the results from
the edge detection tests.
fpga/tests/tb_data: New directory for data and golden outputs
Retire rbt2c.pl, instead use objcopy to directly convert the .bit file into an .o that can be linked with the flash image
Rename armsrc/fpga.c to armsrc/fpgaloader.c (since there is now a new fpga.o, created from fpga.bit)
Remove fpgaimg.c from subversion, add fpga.bit
Instead of creating fpgaimage.elf and osimage.elf separately, now create a joined fullimage.elf
first (obsoleting ldscript-full), then extract only the fpga and os sections with objcopy
(This creates unspecific warnings about an empty segment, need to investigate)
Implement a rudimentary .bit parser in the firmware, use that to locate the bitstream in the new
fpgaimage (which is just a plain copy of the fpga.bit file) and send it to the FPGA
The code will check the format that's in flash and fall back to the legacy format
