RfidResearchGroup/proxmark3
1
1
Fork 0
mirror of https://github.com/RfidResearchGroup/proxmark3.git synced 2024-09-21 15:56:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
4331 commits 3 branches 14 tags 86 MiB
Commit graph

333 commits

Author SHA1 Message Date
Chris fd1c0cac79 FIX: 'standalone mode MattyRun' - compiles and should even work 
CHG: 'standalone mode' - generic banner for each mode. Updated the ledshow to @cjbrigato
 2018-11-16 02:52:42 +01:00
bogiton 34775c81f5
Added BogitoRun identification 2018-10-21 18:29:49 +00:00
bogiton 8079613b37
Add check for the HF_BOG directive for RunMod 2018-10-16 19:41:05 +00:00
Chris dc67b5d7c9 chg: revert fpga_major mode in LF. 
chg: 'lf t55xx deviceconfig'  - persistence to flashmem is now option with param P
 2018-09-23 05:29:55 +02:00
Chris 02cc278e19 chg: remove warnings on coverity 
chg: encapsule flasmem function calls
 2018-09-16 20:47:23 +02:00
Chris ba2543b627 ADD: 'lf t55xx deviceconfig' - command that allows for setting t55xx timings via the client. If run on a RDV40, it also saves the config to flashmemory. This gives you option to have custom timings for your custom antenna in order for your RDV40 to work optimal against a t55xx tag and with your custom antenna. (@iceman) 2018-09-11 18:35:07 +02:00
Chris 24eaac8681 CHG: the thread comms refactoring from offical pm3 repo 
chg: FPC com speed limited to 115200 when compiled with FPC
chg: USART remake (@drandreas)
 2018-09-06 21:43:20 +02:00
RFID Research Group eb0b5116a2
Merge pull request #25 from drandreas/rdv4-legic 
Legic Tag Simulator
 2018-09-06 20:26:39 +02:00
Colin J. Brigato 368fe11df0 Second Pass rewrite of flashmem. added command 'mem spibaud' to switch between 24/48Mhz operation. All is more consistant, less messy. All logic rewrittent avoiding multiple flashinit/flashstop. busywait is now at it's lowest possible. Beware : 48Mhz is VERY buggy cause of sillicon bug (see source for more info), and doesn't give much more than 24Mhz for now since we doubled nearly every operation speed here. 2018-09-06 05:15:52 +02:00
AntiCat 61e4eac2b2 Legic: Moved card simulator into separate file & cleaned interface. 
Reader and card simulation have almost no common code. Moreover the sim
uses an SSP Clock at 212kHz for all timings to prevent any drifting from
the PRNG. This clock speed is not available in reader simulation mode (SSP
runs at up to 3.4MHz, and changes speed between TX and RX). For these
reasons having the code in separate files makes it significantly cleaner.
 2018-09-05 23:03:04 +02:00
Colin J. Brigato 8d673fa1bf First pass rewrite of flashmem driver for optimization. Lot of changes here. Provides PoC of saving and recalling a tag in Standalone mode. Added some printing passthrough to client to azccomodate for vt100 eye-candyness. FastREAD mode implemented for flashmem, testable from client. Beta but functionnal. Reading the whole flash with 1Kb to 32kb buffers was ~730ms, now 380ms Max (even at 24Mhz spi baudrate) 2018-09-03 00:02:44 +02:00
Chris f1d0e9db4d fix: revert back 2018-08-29 19:42:46 +02:00
Chris 42e883f67b FIX: print_result - now prints correct len. 
FIX: DOWNLOAD_BUFFER -  now with correct result logic
 2018-08-28 21:15:28 +02:00
Chris 5f77121694 initial commit to be in sync the-soon-defunct repo pm3rdv40. 2018-08-12 21:54:31 +02:00
Chris bacf8aff0f add: FPC connector skeleton usart. Not working but if will be a starting point for those who might want to help out with it. 2018-07-30 09:54:44 +02:00
iceman1001 4d8488e14b CHG: https://github.com/Proxmark/proxmark3/pull/631 from offical repo. (piwi) 
CHG: textual adjustments
 2018-07-28 14:25:12 +02:00
Chris 79158c7360 chg; preparing for more cmds. 2018-07-06 00:24:04 +02:00
Chris 36d774506c chg: 'sm raw' - implemented 'r' don't read reply 2018-07-05 21:10:21 +02:00
Chris fca841122f chg: 'sc reader' - hooked up atr. 2018-07-05 16:32:10 +02:00
Chris ee006c6a7b add: sc upgrade - beta test 2018-07-05 14:38:31 +02:00
Chris e7342e7402 chg: 'sc upgr' shouldnt print too much 2018-07-05 11:37:04 +02:00
Chris f70b8be5de add: 'sc' - smart card commad [rdv40] 
chg: test to read out firmware
 2018-07-05 10:48:24 +02:00
Chris 3ecff83de2 chg: clean up 2018-07-04 15:29:27 +02:00
Chris 9571cf1d13 chg: and wrap FPC code with defines.. 2018-07-04 13:05:23 +02:00
Chris e09f9cbb32 add: RDV40 smart card module comms ( Thanks to @Willok! ) bitbanging i2c with it 2018-07-04 12:19:04 +02:00
iceman1001 501c29f76d add: support for reading flashmem 2018-05-22 12:09:17 +02:00
iceman1001 6b7819276d add: 'mem info' - rudamentary support for new command. 2018-05-06 09:26:06 +02:00
iceman1001 4cd72b95c5 fix: coverty scan #277726, unsigned value comparision always true. 2018-05-03 20:36:01 +02:00
iceman1001 989b80007c chg: removed debugstatements 2018-05-03 16:20:46 +02:00
iceman1001 e50fef6607 fix: 'mem load' - wrong offset when uploading 2018-05-03 16:10:38 +02:00
iceman1001 021c0a1349 ADD: 'mem' commands. For RDV40 devices only. 
If you don't have one,  comment out inside client/Makefile this line

CFLAGS += -DWITH_FLASH
 2018-05-03 12:15:03 +02:00
iceman1001 207fa2b574 add: potential fix for OSX uses, by @piwi 
chg:  adapting fix to support iceman forks extended commands.
 2018-05-02 08:11:29 +02:00
iceman1001 98f0e9a284 fix: print.c on device doesn't have support for formatter %f 2018-04-27 12:16:35 +02:00
iceman1001 6ab1b285a0 chg. 2018-04-20 19:50:56 +02:00
iceman1001 f5718fb448 chg: wiping / reading / writing flashmem 2018-04-20 16:11:10 +02:00
iceman1001 a746699f5f chg: reading / writing flashmem works better now. 2018-04-19 00:27:44 +02:00
iceman1001 42569a6f13 chg: adjusting for DEFINE usages. 2018-04-18 16:17:49 +02:00
iceman1001 0492df266c chg: only print if compiled with smartcard flag 2018-04-18 12:41:03 +02:00
iceman1001 192aa9abd7 CHG: renamed iso7816 files 
ADD: smartcard functionality  (big thanks to Chris Nocker!)
 2018-04-08 10:51:19 +02:00
iceman1001 3f5aab8f05 chg: preparing for iso7816 module statuses 2018-04-03 11:45:20 +02:00
iceman1001 3d956e686b chg: flashmem adaptions 2018-03-31 10:35:40 +02:00
iceman1001 5690c0f5bc chg: 'hw detectreader' - kind of useless previous change, measuring from two different readers, the max was 18.8v and 20.1v Not even close to 36v the standard ADC is configured 2018-03-15 10:48:57 +01:00
iceman1001 c3ba3f306f chg: 'hw detectreader' - RDV40 adjustment 2018-03-15 09:25:22 +01:00
iceman1001 62814fd352 fix: 'hw detectreader' - adapted to PM3 RDV40 for HF measures. 2018-03-15 09:20:21 +01:00
iceman1001 7e0455aa0c ADD: 'MattyRun' standalone - added the MattyRun standalone mode. *untested compilation* 2018-03-12 12:27:43 +01:00
iceman1001 802994d30a add: 'hf 14 antifuzz' - the outline for the new functionality which fuzzes the anticollision phase ISO 14443a. 2018-02-28 13:21:47 +01:00
iceman1001 7b9ba2de8e chg: standalone modes - adapted for HF_COLIN aswell, for easier compilation 2018-02-25 16:04:24 +01:00
iceman1001 35bdf6a58d FIX: Accourding to errata, a SPI reset should be executed twice. 2018-02-17 17:35:54 +01:00
iceman1001 d0da96bf8a remove warning "missleading-indentation" 
flashmen spi 9bits?
 2018-02-13 16:13:37 +01:00
iceman1001 1709c1ce1a chg: flash_mem - hooked up client - device comms 2018-02-13 15:36:20 +01:00