ADD: raw commands - added the basis for sending RAW commands to FeliCa.
CHG: CRC16 rework, uses table based implementation. This will change more functions as I go on.
the idea is to have a statistically solid conclusion if tag does or does not have the NACK bug.
-in short, ref https://github.com/iceman1001/proxmark3/issues/141
NACK bug; when a tag responds with a NACK to a 8 byte nonce exchange during authentication when the bytes are wrong but the parity bits are correct.
This is a strong oracle which is used in the darkside attack.
Using a dictionary file with 421keys,
Current implementation of checkkeys takes 300 sec.
This implementation of checkkeys takes 250 sec.
I implemented it as a separate command so it will be easier to compare between the old and new checkkeys.
Its also doing much on deviceside, which is a step to much funnier standalone modes :))
fix: 'hf mf hardnested' test cases doesn't need to verify key.
add: 'hf mf ' - collect nonces from classic tag.
chg: switch_off on armside, a more unified way, so we don't forget to turn of the antenna ...
chg: renamed 'hf iclass snoop' into 'hf iclass sniff' in an attempt to make all sniff/snoop commands only SNIFF
chg: 'standalone' -> starting the work of moving all standalone mods into a plugin kind of style, in its own folder.
Added a lot of #ifndef , extern C,
Move inside from ARMSRC -> THUMBS, which made the compiled image smaller.. I don't know if it broke anything.
Moved MF_DBGLEVEL definitions into common.h
Moved print_result from util.c into appmain.c
Also split up some struct typedef into header files so they could be reused in other code places.
''' danger ''' this might have broken stuff...
MERGED: @piwi changes
MERGED: @marshmellows changes.
I'm not even gonna try write up all that stuff..
ADD: changed some commands inside the "Hf 14a sim" on deviceside.
ADD: @mobeius "two nonce" version for mfkey32. It is also inside the "hf 14a sim" with the "x" parameter.
Applied PwPiwi's new parity fix.
Applied Marshmellw's fixes for FSKdemod (HID, IO)
FIX: a potential bigbuffer fault given pwpiwi's change inside lfops.c CmdIOdemodFSK & CmdHIDdemodFSK
FIX: change some "int" parameters to uint's.
FIX: changed the lfops.c - DoAcquisition125k_internal to respect pwpiwi's definitions of FREE_BUFFER_OFFSET
HEADS up: The ultralight functions hasn't been verified since pwpiwi's changes.
- buffers were too small to handle 256 byte frames
- parity bits were only handled for up to 32 byte frames
- trace format was inefficient
- removed parity calculation from decoders in iclass.c (parity not used on air anyway)
ADD: found some new default keys
ADD: changed alot of memorys buffers to use constant values. like usbbuffer sizes, tracelogs, etc etc
ADD: all changes Peter filmoore has in his pull request.
- enhanced tracing: hf 14a list now shows meaningful timing information. With new option f it also shows the frame delay times (fdt)
- small fix for hf 14b list - it used to run into the trace trailer
- hf 14a sim now obeys iso14443 timing (fdt of 1172 or 1234 resp.)
Note: you need to flash FPGA as well.
More details in http://www.proxmark.org/forum/viewtopic.php?pid=9721#p9721
- PM: used GetCountMifare in MifareNested() for improved timing accuracy and to deliver better quality nonces
- PM: MifareNested now delivers exactly two different nonces to avoid time consuming multiple lfsr_recovery32() on client side
- Client: replaced quicksort by bucketsort in crapto1.c which is faster
- Client: use multithreading (two parallel calls to lfsr_recovery32())
- Client: fixed a small bug in mfnested() (always showed trgkey=0)
- Client: introduced a mutex for PrintAndLog() to avoid interlaced printing
Minor rework of hf mf chk:
- Avoid time consuming off/on cycles. Send a "halt" instead.
-According to ISO14443-4, the block number (bit 0) in the PCB needs to be flipped every once in a while. Not doing so leads to the card not responding to commands anymore. The flipping is done according to the standard now.
-Declare iso14_apdu in iso14443a.h to enable usage from other .c files
-iso14_apdu now returns 0 if ReaderReceive returned 0 (to distinguish between the case that ReaderReceive returns -1 and the case that it returns 0)
-Added a new function to change the timeout (to enable changing it from other .c files without the need for a global variable)
2. added abilities to: clear, get, set, load from card, load from nested card emulator dump
3. tried to fix proxmark promt have seen everywhere (not so good)
4. reorganized arm code
2. emulator commands select, authenticate, read block, write block works
3. nested authentication - not working (maybe next release)
4. small bugfixes
5. mifare1ksim - in alpha state!!! code not so clear!!!
