mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-09-24 09:16:13 +08:00
104 lines
3.1 KiB
Markdown
104 lines
3.1 KiB
Markdown
<a id="Top"></a>
|
|
|
|
# 1. Validating Proxmark3 client functionality
|
|
|
|
# Table of Contents
|
|
- [1. Validating Proxmark3 client functionality](#1-validating-proxmark3-client-functionality)
|
|
- [Table of Contents](#table-of-contents)
|
|
- [To get interactive help](#to-get-interactive-help)
|
|
- [First tests](#first-tests)
|
|
- [To quit the client](#to-quit-the-client)
|
|
- [Next steps](#next-steps)
|
|
|
|
|
|
|
|
If all went well you should get some information about the firmware and memory usage as well as the prompt, something like this.
|
|
|
|
```
|
|
[=] Session log /home/iceman/.proxmark3/log_20210708.txt
|
|
[+] loaded from JSON file /home/iceman/.proxmark3/preferences.json
|
|
[=] Using UART port /dev/ttyS3
|
|
[=] Communicating with PM3 over USB-CDC
|
|
|
|
|
|
██████╗ ███╗ ███╗ ████╗
|
|
██╔══██╗████╗ ████║ ══█║
|
|
██████╔╝██╔████╔██║ ████╔╝
|
|
██╔═══╝ ██║╚██╔╝██║ ══█║
|
|
██║ ██║ ╚═╝ ██║ ████╔╝ Iceman ☕
|
|
╚═╝ ╚═╝ ╚═╝ ╚═══╝ ❄️ bleeding edge
|
|
|
|
https://github.com/rfidresearchgroup/proxmark3/
|
|
|
|
[ Proxmark3 RFID instrument ]
|
|
|
|
[ CLIENT ]
|
|
client: RRG/Iceman/master/v4.13441-129-g60d132fcc 2021-07-08 22:00:00
|
|
compiled with GCC 10.3.0 OS:Linux ARCH:x86_64
|
|
|
|
[ PROXMARK RDV4 ]
|
|
device.................... RDV4
|
|
firmware.................. RDV4
|
|
external flash............ present
|
|
smartcard reader.......... present
|
|
FPC USART for BT add-on... absent
|
|
|
|
[ ARM ]
|
|
bootrom: RRG/Iceman/master/v4.13441 2020-05-21 22:00:10
|
|
os: RRG/Iceman/master/v4.13441 2019-05-21 22:00:26
|
|
compiled with GCC 9.2.1 20191025 (release) [ARM/arm-9-branch revision 277599]
|
|
|
|
[ FPGA ]
|
|
LF image built for 2s30vq100 on 2020-07-08 at 23: 8: 7
|
|
HF image built for 2s30vq100 on 2020-07-08 at 23: 8:19
|
|
HF FeliCa image built for 2s30vq100 on 2020-07-08 at 23: 8:30
|
|
|
|
[ Hardware ]
|
|
--= uC: AT91SAM7S512 Rev A
|
|
--= Embedded Processor: ARM7TDMI
|
|
--= Internal SRAM size: 64K bytes
|
|
--= Architecture identifier: AT91SAM7Sxx Series
|
|
--= Embedded flash memory 512K bytes ( 59% used )
|
|
|
|
[usb] pm3 -->
|
|
```
|
|
|
|
This `[usb] pm3 --> ` is the Proxmark3 interactive prompt.
|
|
|
|
|
|
### To get interactive help
|
|
^[Top](#top)
|
|
|
|
For basic help type `help`. Or for help on a set of sub commands type the command followed by `help`. For example `hf mf help`.
|
|
|
|
### First tests
|
|
^[Top](#top)
|
|
|
|
These commands will return some info about your Proxmark software and hardware status.
|
|
```
|
|
[usb] pm3 --> hw status
|
|
[usb] pm3 --> hw version
|
|
[usb] pm3 --> hw tune
|
|
```
|
|
|
|
You are now ready to use your newly flashed proxmark3 device. Many commands uses the `h` parameter to show a help text.
|
|
|
|
### To quit the client
|
|
^[Top](#top)
|
|
|
|
```
|
|
[usb] pm3 --> quit
|
|
```
|
|
or simple press `CTRL-D`.
|
|
|
|
## Next steps
|
|
^[Top](#top)
|
|
|
|
Some configuration steps are still needed.
|
|
|
|
For the next steps, please read the following pages:
|
|
|
|
* [First Use and Verification](/doc/md/Use_of_Proxmark/2_Configuration-and-Verification.md)
|
|
* [Commands & Features](/doc/md/Use_of_Proxmark/3_Commands-and-Features.md)
|
|
|