proxmark3/doc/commands.md

Proxmark3 command dump

Some commands are available only if a Proxmark3 is actually connected.

Check column "offline" for their availability.

command	offline	description
auto	N	Automated detection process for unknown tags
clear	Y	Clear screen
help	Y	This help. Use '<command> help' for details of a particular command.
hints	Y	Turn hints on / off
msleep	Y	Add a pause in milliseconds
pref	Y	Edit preferences
rem	Y	Add a text line in log file
quit	Y	``
exit	Y	Exit program

analyse

{ Analyse utils... }

command	offline	description
analyse help	Y	This help
analyse lcr	Y	Generate final byte for XOR LRC
analyse crc	Y	Stub method for CRC evaluations
analyse chksum	Y	Checksum with adding, masking and one's complement
analyse dates	Y	Look for datestamps in a given array of bytes
analyse tea	Y	Crypto TEA test
analyse lfsr	Y	LFSR tests
analyse a	Y	num bits test
analyse nuid	Y	create NUID from 7byte UID
analyse demodbuff	Y	Load binary string to demodbuffer
analyse freq	Y	Calc wave lengths
analyse foo	Y	muxer

data

{ Plot window / data buffer manipulation... }

command	offline	description
data help	Y	This help
data biphaserawdecode	Y	Biphase decode bin stream in DemodBuffer
data detectclock	Y	Detect ASK, FSK, NRZ, PSK clock rate of wave in GraphBuffer
data fsktonrz	Y	Convert fsk2 to nrz wave for alternate fsk demodulating (for weak fsk)
data manrawdecode	Y	Manchester decode binary stream in DemodBuffer
data modulation	Y	Identify LF signal for clock and modulation
data rawdemod	Y	Demodulate the data in the GraphBuffer and output binary
data askedgedetect	Y	[threshold] Adjust Graph for manual ASK demod using the length of sample differences to detect the edge of a wave (use 20-45, def:25)
data autocorr	Y	Autocorrelation over window
data dirthreshold	Y	<thres up> <thres down> -- Max rising higher up-thres/ Min falling lower down-thres, keep rest as prev.
data decimate	Y	Decimate samples
data undecimate	Y	Un-decimate samples
data hide	Y	Hide graph window
data hpf	Y	Remove DC offset from trace
data iir	Y	apply IIR buttersworth filter on plotdata
data grid	Y	<x> <y> -- overlay grid on graph window, use zero value to turn off either
data ltrim	Y	<samples> -- Trim samples from left of trace
data mtrim	Y	<start> <stop> -- Trim out samples from the specified start to the specified stop
data norm	Y	Normalize max/min to +/-128
data plot	Y	Show graph window (hit 'h' in window for keystroke help)
data rtrim	Y	<location to end trace> -- Trim samples from right of trace
data setgraphmarkers	Y	[orange_marker] [blue_marker] (in graph window)
data shiftgraphzero	Y	<shift> -- Shift 0 for Graphed wave + or - shift value
data timescale	Y	`Set a timescale to get a differential reading between the yellow and purple markers as time duration
`
data zerocrossings	Y	Count time between zero-crossings
data convertbitstream	Y	Convert GraphBuffer's 0/1 values to 127 / -127
data getbitstream	Y	Convert GraphBuffer's >=1 values to 1 and <1 to 0
data bin2hex	Y	Converts binary to hexadecimal
data bitsamples	N	Get raw samples as bitstring
data clear	Y	Clears bigbuf on deviceside and graph window
data hexsamples	N	<bytes> [<offset>] -- Dump big buffer as hex bytes
data hex2bin	Y	Converts hexadecimal to binary
data load	Y	Load contents of file into graph window
data ndef	Y	Decode NDEF records
data print	Y	print the data in the DemodBuffer
data samples	N	[512 - 40000] -- Get raw samples for graph window (GraphBuffer)
data save	Y	Save signal trace data (from graph window)
data setdebugmode	Y	`<0
data tune	N	Measure tuning of device antenna. Results shown in graph window

emv

{ EMV ISO-14443 / ISO-7816... }

command	offline	description
emv help	Y	This help
emv exec	N	Executes EMV contactless transaction.
emv pse	N	Execute PPSE. It selects 2PAY.SYS.DDF01 or 1PAY.SYS.DDF01 directory.
emv search	N	Try to select all applets from applets list and print installed applets.
emv select	N	Select applet.
emv gpo	N	Execute GetProcessingOptions.
emv readrec	N	Read files from card.
emv genac	N	Generate ApplicationCryptogram.
emv challenge	N	Generate challenge.
emv intauth	N	Internal authentication.
emv scan	N	Scan EMV card and save it contents to json file for emulator.
emv test	Y	Crypto logic test.
emv list	Y	List ISO7816 history
emv roca	N	Extract public keys and run ROCA test

hf

{ High frequency commands... }

command	offline	description
hf help	Y	This help
hf list	Y	List protocol data in trace buffer
hf plot	N	Plot signal
hf tune	N	Continuously measure HF antenna tuning
hf search	Y	Search for known HF tags
hf sniff	N	<samples to skip (10000)> <triggers to skip (1)> Generic HF Sniff

hf 14a

{ ISO14443A RFIDs... }

command	offline	description
hf 14a help	Y	This help
hf 14a list	Y	List ISO 14443-a history
hf 14a info	N	Tag information
hf 14a reader	N	Act like an ISO14443-a reader
hf 14a cuids	N	<n> Collect n>0 ISO14443-a UIDs in one go
hf 14a sim	N	<UID> -- Simulate ISO 14443-a tag
hf 14a sniff	N	sniff ISO 14443-a traffic
hf 14a apdu	N	Send ISO 14443-4 APDU to tag
hf 14a chaining	N	Control ISO 14443-4 input chaining
hf 14a raw	N	Send raw hex data to tag
hf 14a antifuzz	N	Fuzzing the anticollision phase. Warning! Readers may react strange
hf 14a config	N	Configure 14a settings (use with caution)

hf 14b

{ ISO14443B RFIDs... }

command	offline	description
hf 14b help	Y	This help
hf 14b apdu	N	Send ISO 14443-4 APDU to tag
hf 14b dump	N	Read all memory pages of an ISO14443-B tag, save to file
hf 14b info	N	Tag information
hf 14b list	Y	List ISO 14443B history
hf 14b ndef	N	Read NDEF file on tag
hf 14b raw	N	Send raw hex data to tag
hf 14b reader	N	Act as a 14443B reader to identify a tag
hf 14b sim	N	Fake ISO 14443B tag
hf 14b sniff	N	Eavesdrop ISO 14443B
hf 14b rdbl	N	Read SRI512/SRIX4x block
hf 14b sriwrite	N	`Write data to a SRI512

hf 15

{ ISO15693 RFIDs... }

command	offline	description
hf 15 help	Y	This help
hf 15 list	Y	List ISO15693 history
hf 15 demod	Y	Demodulate ISO15693 from tag
hf 15 dump	N	Read all memory pages of an ISO15693 tag, save to file
hf 15 info	N	Tag information
hf 15 sniff	N	Sniff ISO15693 traffic
hf 15 raw	N	Send raw hex data to tag
hf 15 rdbl	N	Read a block
hf 15 reader	N	Act like an ISO15693 reader
hf 15 readmulti	N	Reads multiple Blocks
hf 15 restore	N	Restore from file to all memory pages of an ISO15693 tag
hf 15 samples	N	Acquire Samples as Reader (enables carrier, sends inquiry)
hf 15 sim	N	Fake an ISO15693 tag
hf 15 wrbl	N	Write a block
hf 15 findafi	N	Brute force AFI of an ISO15693 tag
hf 15 writeafi	N	Writes the AFI on an ISO15693 tag
hf 15 writedsfid	N	Writes the DSFID on an ISO15693 tag
hf 15 csetuid	N	Set UID for magic Chinese card

hf epa

{ German Identification Card... }

command	offline	description
hf epa help	Y	This help
hf epa cnonces	N	<m> <n> <d> Acquire n>0 encrypted PACE nonces of size m>0 with d sec pauses
hf epa preplay	N	<mse> <get> <map> <pka> <ma> Perform PACE protocol by replaying given APDUs

hf felica

{ ISO18092 / FeliCa RFIDs... }

command	offline	description
hf felica help	Y	This help
hf felica list	Y	List ISO 18092/FeliCa history
hf felica reader	N	Act like an ISO18092/FeliCa reader
hf felica sniff	N	Sniff ISO 18092/FeliCa traffic
hf felica raw	N	Send raw hex data to tag
hf felica rdunencrypted	N	read Block Data from authentication-not-required Service.
hf felica wrunencrypted	N	write Block Data to an authentication-not-required Service.
hf felica rqservice	N	verify the existence of Area and Service, and to acquire Key Version.
hf felica rqresponse	N	verify the existence of a card and its Mode.
hf felica scsvcode	N	acquire Area Code and Service Code.
hf felica rqsyscode	N	acquire System Code registered to the card.
hf felica auth1	N	authenticate a card. Start mutual authentication with Auth1
hf felica auth2	N	allow a card to authenticate a Reader/Writer. Complete mutual authentication
hf felica rqspecver	N	acquire the version of card OS.
hf felica resetmode	N	reset Mode to Mode 0.
hf felica litesim	N	<NDEF2> - only reply to poll request
hf felica litedump	N	Wait for and try dumping FelicaLite

hf fido

{ FIDO and FIDO2 authenticators... }

command	offline	description
hf fido help	Y	This help.
hf fido list	N	List ISO 14443A history
hf fido info	N	Info about FIDO tag.
hf fido reg	N	FIDO U2F Registration Message.
hf fido auth	N	FIDO U2F Authentication Message.
hf fido make	N	FIDO2 MakeCredential command.
hf fido assert	N	FIDO2 GetAssertion command.

hf iclass

{ ICLASS RFIDs... }

command	offline	description
hf iclass help	Y	This help
hf iclass dump	N	[options..] Dump Picopass / iCLASS tag to file
hf iclass info	Y	Tag information
hf iclass list	Y	List iclass history
hf iclass rdbl	N	[options..] Read Picopass / iCLASS block
hf iclass reader	N	Act like an Picopass / iCLASS reader
hf iclass restore	N	[options..] Restore a dump file onto a Picopass / iCLASS tag
hf iclass sniff	N	Eavesdrop Picopass / iCLASS communication
hf iclass wrbl	N	[options..] Write Picopass / iCLASS block
hf iclass chk	N	[options..] Check keys
hf iclass loclass	Y	[options..] Use loclass to perform bruteforce reader attack
hf iclass lookup	Y	[options..] Uses authentication trace to check for key in dictionary file
hf iclass sim	N	[options..] Simulate iCLASS tag
hf iclass eload	N	[f <fn> ] Load Picopass / iCLASS dump file into emulator memory
hf iclass esave	N	[f <fn> ] Save emulator memory to file
hf iclass eview	N	[options..] View emulator memory
hf iclass calcnewkey	Y	[options..] Calc diversified keys (blocks 3 & 4) to write new keys
hf iclass encrypt	Y	[options..] Encrypt given block data
hf iclass decrypt	Y	[options..] Decrypt given block data or tag dump file
hf iclass managekeys	Y	[options..] Manage keys to use with iclass commands
hf iclass permutekey	N	Permute function from 'heart of darkness' paper
hf iclass view	Y	[options..] Display content from tag dump file

hf legic

{ LEGIC RFIDs... }

command	offline	description
hf legic help	Y	This help
hf legic list	Y	List LEGIC history
hf legic reader	N	LEGIC Prime Reader UID and tag info
hf legic info	N	Display deobfuscated and decoded LEGIC Prime tag data
hf legic dump	N	Dump LEGIC Prime tag to binary file
hf legic restore	N	Restore a dump file onto a LEGIC Prime tag
hf legic rdbl	N	Read bytes from a LEGIC Prime tag
hf legic sim	N	Start tag simulator
hf legic wrbl	N	Write data to a LEGIC Prime tag
hf legic crc	Y	Calculate Legic CRC over given bytes
hf legic eload	Y	Load binary dump to emulator memory
hf legic esave	Y	Save emulator memory to binary file
hf legic wipe	N	Wipe a LEGIC Prime tag

hf lto

{ LTO Cartridge Memory RFIDs... }

command	offline	description
hf lto help	Y	This help
hf lto dump	N	Dump LTO-CM tag to file
hf lto restore	N	Restore dump file to LTO-CM tag
hf lto info	N	Tag information
hf lto rdbl	N	Read block
hf lto wrbl	N	Write block
hf lto list	Y	List LTO-CM history

hf mf

{ MIFARE RFIDs... }

command	offline	description
hf mf help	Y	This help
hf mf list	Y	List MIFARE history
hf mf darkside	N	Darkside attack
hf mf nested	N	Nested attack
hf mf hardnested	Y	Nested attack for hardened MIFARE Classic cards
hf mf staticnested	N	Nested attack against static nonce MIFARE Classic cards
hf mf autopwn	N	Automatic key recovery tool for MIFARE Classic
hf mf nack	N	Test for MIFARE NACK bug
hf mf chk	N	Check keys
hf mf fchk	N	Check keys fast, targets all keys on card
hf mf decrypt	Y	[nt] [ar_enc] [at_enc] [data] - to decrypt sniff or trace
hf mf supercard	N	Extract info from a super card``
hf mf auth4	N	ISO14443-4 AES authentication
hf mf dump	N	Dump MIFARE Classic tag to binary file
hf mf mad	N	Checks and prints MAD
hf mf ndef	N	Prints NDEF records from card
hf mf personalize	N	Personalize UID (MIFARE Classic EV1 only)
hf mf rdbl	N	Read MIFARE Classic block
hf mf rdsc	N	Read MIFARE Classic sector
hf mf restore	N	Restore MIFARE Classic binary file to BLANK tag
hf mf setmod	N	Set MIFARE Classic EV1 load modulation strength
hf mf wrbl	N	Write MIFARE Classic block
hf mf sim	N	Simulate MIFARE card
hf mf ecfill	N	Fill simulator memory with help of keys from simulator
hf mf eclr	N	Clear simulator memory
hf mf egetblk	N	Get simulator memory block
hf mf egetsc	N	Get simulator memory sector
hf mf ekeyprn	N	Print keys from simulator memory
hf mf eload	N	Load from file emul dump
hf mf esave	N	Save to file emul dump
hf mf eset	N	Set simulator memory block
hf mf eview	N	View emul memory
hf mf cgetblk	N	Read block
hf mf cgetsc	N	Read sector
hf mf cload	N	Load dump
hf mf csave	N	Save dump from card into file or emulator
hf mf csetblk	N	Write block
hf mf csetuid	N	Set UID
hf mf cview	N	view card
hf mf cwipe	N	Wipe card to default UID/Sectors/Keys
hf mf gen3uid	N	Set UID without manufacturer block
hf mf gen3blk	N	Overwrite full manufacturer block
hf mf gen3freeze	N	Perma lock further UID changes
hf mf ice	N	collect MIFARE Classic nonces to file

hf mfp

{ MIFARE Plus RFIDs... }

command	offline	description
hf mfp help	Y	This help
hf mfp info	N	Info about Mifare Plus tag
hf mfp wrp	N	Write Perso command
hf mfp initp	N	Fills all the card's keys
hf mfp commitp	N	Move card to SL1 or SL3 mode
hf mfp auth	N	Authentication
hf mfp rdbl	N	Read blocks
hf mfp rdsc	N	Read sectors
hf mfp wrbl	N	Write blocks
hf mfp chk	N	Check keys
hf mfp mad	N	Checks and prints MAD
hf mfp ndef	N	Prints NDEF records from card

hf mfu

{ MIFARE Ultralight RFIDs... }

command	offline	description
hf mfu help	Y	This help
hf mfu info	N	Tag information
hf mfu dump	N	Dump Ultralight / Ultralight-C / NTAG tag to binary file
hf mfu restore	N	Restore a dump onto a MFU MAGIC tag
hf mfu eload	N	load Ultralight .eml dump file into emulator memory
hf mfu rdbl	N	Read block
hf mfu wrbl	N	Write block
hf mfu cauth	N	Authentication - Ultralight C
hf mfu setpwd	N	Set 3des password - Ultralight-C
hf mfu setuid	N	Set UID - MAGIC tags only
hf mfu sim	N	Simulate Ultralight from emulator memory
hf mfu gen	Y	Generate 3des mifare diversified keys
hf mfu pwdgen	Y	Generate pwd from known algos
hf mfu otptear	N	Tear-off test on OTP bits
hf mfu ndef	N	Prints NDEF records from card

hf mfdes

{ MIFARE Desfire RFIDs... }

command	offline	description
hf mfdes help	Y	This help
hf mfdes auth	N	Tries a MIFARE DesFire Authentication
hf mfdes changekey	N	Change Key
hf mfdes chk	N	Check keys
hf mfdes enum	N	Tries enumerate all applications
hf mfdes formatpicc	N	Format PICC
hf mfdes getuid	N	Get random uid
hf mfdes info	N	Tag information
hf mfdes list	Y	List DESFire (ISO 14443A) history
hf mfdes createaid	N	Create Application ID
hf mfdes deleteaid	N	Delete Application ID
hf mfdes selectaid	N	Select Application ID
hf mfdes changevalue	N	Write value of a value file (credit/debit/clear)
hf mfdes clearfile	N	Clear record File
hf mfdes createfile	N	Create Standard/Backup File
hf mfdes createvaluefile	N	Create Value File
hf mfdes createrecordfile	N	Create Linear/Cyclic Record File
hf mfdes deletefile	N	Create Delete File
hf mfdes dump	N	Dump all files
hf mfdes getvalue	N	Get value of file
hf mfdes readdata	N	Read data from standard/backup/record file
hf mfdes writedata	N	Write data to standard/backup/record file

hf st

{ ST Rothult RFIDs... }

command	offline	description
hf st help	Y	This help
hf st info	N	Tag information
hf st list	Y	List ISO 14443A/7816 history
hf st ndef	Y	read NDEF file on tag
hf st protect	N	change protection on tag
hf st pwd	N	change password on tag
hf st sim	N	Fake ISO 14443A/ST tag

hf thinfilm

{ Thinfilm RFIDs... }

command	offline	description
hf thinfilm help	Y	This help
hf thinfilm info	N	Tag information
hf thinfilm list	Y	List NFC Barcode / Thinfilm history - not correct
hf thinfilm sim	N	Fake Thinfilm tag

hf topaz

{ TOPAZ (NFC Type 1) RFIDs... }

command	offline	description
hf topaz help	Y	This help
hf topaz list	Y	List Topaz history
hf topaz info	N	Tag information
hf topaz reader	N	Act like a Topaz reader
hf topaz sim	N	<UID> -- Simulate Topaz tag
hf topaz sniff	N	Sniff Topaz reader-tag communication
hf topaz raw	N	Send raw hex data to tag

hf waveshare

{ Waveshare NFC ePaper... }

command	offline	description
hf waveshare help	Y	This help
hf waveshare loadbmp	N	Load BMP file to Waveshare NFC ePaper

hw

{ Hardware commands... }

command	offline	description
hw help	Y	This help
hw connect	Y	connect Proxmark3 to serial port
hw dbg	N	Set Proxmark3 debug level
hw detectreader	N	`['l'
hw fpgaoff	N	Set FPGA off
hw lcd	N	<HEX command> <count> -- Send command/data to LCD
hw lcdreset	N	Hardware reset LCD
hw ping	N	Test if the Proxmark3 is responsive
hw readmem	N	[address] -- Read memory at decimal address from flash
hw reset	N	Reset the Proxmark3
hw setlfdivisor	N	<19 - 255> -- Drive LF antenna at 12MHz/(divisor+1)
hw setmux	N	Set the ADC mux to a specific value
hw standalone	N	Jump to the standalone mode
hw status	N	Show runtime status information about the connected Proxmark3
hw tearoff	N	Program a tearoff hook for the next command supporting tearoff
hw tia	N	Trigger a Timing Interval Acquisition to re-adjust the RealTimeCounter divider
hw tune	N	Measure antenna tuning
hw version	N	Show version information about the connected Proxmark3

lf

{ Low frequency commands... }

command	offline	description
lf help	Y	This help
lf config	N	Get/Set config for LF sampling, bit/sample, decimation, frequency
lf cmdread	N	Modulate LF reader field to send command before read (all periods in microseconds)
lf read	N	Read LF tag
lf search	Y	Read and Search for valid known tag (in offline mode it you can load first then search)
lf sim	N	Simulate LF tag from buffer with optional GAP (in microseconds)
lf simask	N	Simulate LF ASK tag from demodbuffer or input
lf simfsk	N	Simulate LF FSK tag from demodbuffer or input
lf simpsk	N	Simulate LF PSK tag from demodbuffer or input
lf simbidir	N	Simulate LF tag (with bidirectional data transmission between reader and tag)
lf sniff	N	Sniff LF traffic between reader and tag
lf tune	N	Continuously measure LF antenna tuning

lf awid

{ AWID RFIDs... }

command	offline	description
lf awid help	Y	this help
lf awid demod	Y	demodulate an AWID FSK tag from the GraphBuffer
lf awid reader	N	attempt to read and extract tag data
lf awid clone	N	clone AWID tag to T55x7 or Q5/T5555
lf awid sim	N	simulate AWID tag
lf awid brute	N	Bruteforce card number against reader
lf awid watch	N	continuously watch for cards. Reader mode

lf cotag

{ COTAG CHIPs... }

command	offline	description
lf cotag help	Y	This help
lf cotag demod	Y	Tries to decode a COTAG signal
lf cotag reader	N	Attempt to read and extract tag data

lf destron

{ FDX-A Destron RFIDs... }

command	offline	description
lf destron help	Y	This help
lf destron demod	Y	Demodulate an Destron tag from the GraphBuffer
lf destron reader	N	Attempt to read and extract tag data from the antenna
lf destron clone	N	Clone Destron tag to T55x7
lf destron sim	N	Simulate Destron tag

lf em

{ EM4X CHIPs & RFIDs... }

command	offline	description
lf em help	Y	This help
lf em 410x_demod	Y	demodulate a EM410x tag from the GraphBuffer
lf em 410x_read	N	attempt to read and extract tag data
lf em 410x_sim	N	simulate EM410x tag
lf em 410x_brute	N	reader bruteforce attack by simulating EM410x tags
lf em 410x_watch	N	watches for EM410x 125/134 kHz tags (option 'h' for 134)
lf em 410x_spoof	N	watches for EM410x 125/134 kHz tags, and replays them. (option 'h' for 134)
lf em 410x_clone	N	write EM410x UID to T55x7 or Q5/T5555 tag
lf em 4x05_chk	N	Check passwords from dictionary
lf em 4x05_demod	Y	demodulate a EM4x05/EM4x69 tag from the GraphBuffer
lf em 4x05_dump	N	dump EM4x05/EM4x69 tag
lf em 4x05_wipe	N	wipe EM4x05/EM4x69 tag
lf em 4x05_info	N	tag information EM4x05/EM4x69
lf em 4x05_read	N	read word data from EM4x05/EM4x69
lf em 4x05_write	N	write word data to EM4x05/EM4x69
lf em 4x05_unlock	N	execute tear off against EM4x05/EM4x69
lf em 4x05_sniff	Y	Attempt to recover em4x05 commands from sample buffer
lf em 4x05_brute	N	Bruteforce password
lf em 4x50_dump	N	dump EM4x50 tag
lf em 4x50_info	N	tag information EM4x50
lf em 4x50_write	N	write word data to EM4x50
lf em 4x50_write_password	N	change password of EM4x50 tag
lf em 4x50_read	N	read word data from EM4x50
lf em 4x50_wipe	N	wipe data from EM4x50

lf fdxb

{ FDX-B RFIDs... }

command	offline	description
lf fdxb help	Y	this help
lf fdxb demod	Y	demodulate a FDX-B ISO11784/85 tag from the GraphBuffer
lf fdxb reader	N	attempt to read at 134kHz and extract tag data
lf fdxb clone	N	clone animal ID tag to T55x7 or Q5/T5555
lf fdxb sim	N	simulate Animal ID tag

lf gallagher

{ GALLAGHER RFIDs... }

command	offline	description
lf gallagher help	Y	This help
lf gallagher demod	Y	Demodulate an GALLAGHER tag from the GraphBuffer
lf gallagher reader	N	Attempt to read and extract tag data from the antenna
lf gallagher clone	N	clone GALLAGHER tag to T55x7
lf gallagher sim	N	simulate GALLAGHER tag

lf gproxii

{ Guardall Prox II RFIDs... }

command	offline	description
lf gproxii help	Y	this help
lf gproxii demod	Y	demodulate a G Prox II tag from the GraphBuffer
lf gproxii reader	N	attempt to read and extract tag data from the antenna
lf gproxii clone	N	clone Guardall tag to T55x7 or Q5/T5555
lf gproxii sim	N	simulate Guardall tag

lf hid

{ HID Prox RFIDs... }

command	offline	description
lf hid help	Y	this help
lf hid demod	Y	demodulate HID Prox tag from the GraphBuffer
lf hid reader	N	attempt to read and extract tag data
lf hid clone	N	clone HID tag to T55x7
lf hid sim	N	simulate HID tag
lf hid brute	N	bruteforce card number against reader
lf hid watch	N	continuously watch for cards. Reader mode

lf hitag

{ Hitag CHIPs... }

command	offline	description
lf hitag help	Y	This help
lf hitag list	N	List Hitag trace history
lf hitag info	N	Tag information
lf hitag reader	N	Act like a Hitag Reader
lf hitag sim	N	Simulate Hitag transponder
lf hitag sniff	N	Eavesdrop Hitag communication
lf hitag writer	N	Act like a Hitag Writer
lf hitag dump	N	Dump Hitag2 tag
lf hitag cc	N	Test all challenges

lf idteck

{ Idteck RFIDs... }

command	offline	description
lf idteck help	Y	This help
lf idteck demod	Y	Demodulate an Idteck tag from the GraphBuffer
lf idteck reader	N	Attempt to read and Extract tag data from the antenna

lf indala

{ Indala RFIDs... }

command	offline	description
lf indala help	Y	this help
lf indala demod	Y	demodulate an indala tag (PSK1) from GraphBuffer
lf indala altdemod	Y	alternative method to Demodulate samples for Indala 64 bit UID (option '224' for 224 bit)
lf indala reader	N	read an Indala Prox tag from the antenna
lf indala clone	N	clone Indala tag to T55x7 or Q5/T5555
lf indala sim	N	simulate Indala tag

lf io

{ ioProx RFIDs... }

command	offline	description
lf io help	Y	this help
lf io demod	Y	demodulate an IOProx tag from the GraphBuffer
lf io reader	N	attempt to read and extract tag data
lf io clone	N	clone IOProx tag to T55x7 or Q5/T5555
lf io sim	N	simulate IOProx tag
lf io watch	N	continuously watch for cards. Reader mode

lf jablotron

{ Jablotron RFIDs... }

command	offline	description
lf jablotron help	Y	This help
lf jablotron demod	Y	Demodulate an Jablotron tag from the GraphBuffer
lf jablotron reader	N	Attempt to read and extract tag data from the antenna
lf jablotron clone	N	clone jablotron tag to T55x7 or Q5/T5555
lf jablotron sim	N	simulate jablotron tag

lf keri

{ KERI RFIDs... }

command	offline	description
lf keri help	Y	This help
lf keri demod	Y	Demodulate an KERI tag from the GraphBuffer
lf keri reader	N	Attempt to read and extract tag data from the antenna
lf keri clone	N	clone KERI tag to T55x7 or Q5/T5555
lf keri sim	N	simulate KERI tag

lf motorola

{ Motorola RFIDs... }

command	offline	description
lf motorola help	Y	This help
lf motorola demod	Y	Demodulate an MOTOROLA tag from the GraphBuffer
lf motorola reader	N	Attempt to read and extract tag data from the antenna
lf motorola clone	N	clone MOTOROLA tag to T55x7
lf motorola sim	N	simulate MOTOROLA tag

lf nedap

{ Nedap RFIDs... }

command	offline	description
lf nedap help	Y	This help
lf nedap demod	Y	Demodulate Nedap tag from the GraphBuffer
lf nedap generate	Y	Generate Nedap bitstream in DemodBuffer
lf nedap read	N	Attempt to read and extract tag data from the antenna
lf nedap clone	N	Clone Nedap tag to T55x7 or Q5/T5555
lf nedap sim	N	Simulate Nedap tag

lf nexwatch

{ NexWatch RFIDs... }

command	offline	description
lf nexwatch help	Y	This help
lf nexwatch demod	Y	Demodulate a NexWatch tag (nexkey, quadrakey) from the GraphBuffer
lf nexwatch reader	N	Attempt to Read and Extract tag data from the antenna
lf nexwatch clone	N	clone NexWatch tag to T55x7
lf nexwatch sim	N	simulate NexWatch tag

lf noralsy

{ Noralsy RFIDs... }

command	offline	description
lf noralsy help	Y	This help
lf noralsy demod	Y	Demodulate an Noralsy tag from the GraphBuffer
lf noralsy reader	N	Attempt to read and extract tag data from the antenna
lf noralsy clone	N	clone Noralsy tag to T55x7 or Q5/T5555
lf noralsy sim	N	simulate Noralsy tag

lf pac

{ PAC/Stanley RFIDs... }

command	offline	description
lf pac help	Y	This help
lf pac demod	Y	Demodulate a PAC tag from the GraphBuffer
lf pac reader	N	Attempt to read and extract tag data from the antenna
lf pac clone	N	clone PAC tag to T55x7
lf pac sim	N	simulate PAC tag

lf paradox

{ Paradox RFIDs... }

command	offline	description
lf paradox help	Y	This help
lf paradox demod	Y	Demodulate a Paradox FSK tag from the GraphBuffer
lf paradox reader	N	Attempt to read and Extract tag data from the antenna
lf paradox clone	N	clone paradox tag
lf paradox sim	N	simulate paradox tag

lf pcf7931

{ PCF7931 CHIPs... }

command	offline	description
lf pcf7931 help	Y	This help
lf pcf7931 read	N	Read content of a PCF7931 transponder
lf pcf7931 write	N	Write data on a PCF7931 transponder.
lf pcf7931 config	Y	Configure the password, the tags initialization delay and time offsets (optional)

lf presco

{ Presco RFIDs... }

command	offline	description
lf presco help	Y	This help
lf presco demod	Y	demodulate Presco tag from the GraphBuffer
lf presco reader	N	Attempt to read and Extract tag data
lf presco clone	N	clone presco tag to T55x7 or Q5/T5555
lf presco sim	N	simulate presco tag

lf pyramid

{ Farpointe/Pyramid RFIDs... }

command	offline	description
lf pyramid help	Y	this help
lf pyramid demod	Y	demodulate a Pyramid FSK tag from the GraphBuffer
lf pyramid reader	N	attempt to read and extract tag data
lf pyramid clone	N	clone pyramid tag to T55x7 or Q5/T5555
lf pyramid sim	N	simulate pyramid tag

lf securakey

{ Securakey RFIDs... }

command	offline	description
lf securakey help	Y	This help
lf securakey demod	Y	Demodulate an Securakey tag from the GraphBuffer
lf securakey reader	N	Attempt to read and extract tag data from the antenna
lf securakey clone	N	clone Securakey tag to T55x7
lf securakey sim	N	simulate Securakey tag

lf ti

{ TI CHIPs... }

command	offline	description
lf ti help	Y	This help
lf ti demod	Y	Demodulate raw bits for TI LF tag from the GraphBuffer
lf ti reader	N	Read and decode a TI 134 kHz tag
lf ti write	N	Write new data to a r/w TI 134 kHz tag

lf t55xx

{ T55xx CHIPs... }

command	offline	description
lf t55xx help	Y	This help
lf t55xx clonehelp	N	Shows the available clone commands
lf t55xx config	Y	Set/Get T55XX configuration (modulation, inverted, offset, rate)
lf t55xx dangerraw	N	Sends raw bitstream. Dangerous, do not use!! b <bitstream> t <timing>
lf t55xx detect	Y	[1] Try detecting the tag modulation from reading the configuration block.
lf t55xx deviceconfig	N	Set/Get T55XX device configuration (startgap, writegap, write0, write1, readgap
lf t55xx dump	N	[password] [o] Dump T55xx card Page 0 block 0-7. Optional [password], [override]
lf t55xx info	Y	[1] Show T55x7 configuration data (page 0/ blk 0)
lf t55xx p1detect	N	[1] Try detecting if this is a t55xx tag by reading page 1
lf t55xx read	N	b <block> p [password] [o] [1] -- Read T55xx block data. Optional [p password], [override], [page1]
lf t55xx resetread	N	Send Reset Cmd then lf read the stream to attempt to identify the start of it (needs a demod and/or plot after)
lf t55xx restore	N	f <filename> [p <password>] Restore T55xx card Page 0 / Page 1 blocks
lf t55xx trace	Y	[1] Show T55x7 traceability data (page 1/ blk 0-1)
lf t55xx wakeup	N	Send AOR wakeup command
lf t55xx write	N	b <block> d <data> p [password] [1] -- Write T55xx block data. Optional [p password], [page1]
lf t55xx bruteforce	N	<start password> <end password> Simple bruteforce attack to find password
lf t55xx chk	N	Check passwords from dictionary/flash
lf t55xx protect	N	Password protect tag
lf t55xx recoverpw	N	[password] Try to recover from bad password write from a cloner. Only use on PW protected chips!
lf t55xx sniff	Y	Attempt to recover T55xx commands from sample buffer
lf t55xx special	N	Show block changes with 64 different offsets
lf t55xx wipe	N	[q] Wipe a T55xx tag and set defaults (will destroy any data on tag)

lf viking

{ Viking RFIDs... }

command	offline	description
lf viking help	Y	This help
lf viking demod	Y	Demodulate a Viking tag from the GraphBuffer
lf viking reader	N	Attempt to read and Extract tag data from the antenna
lf viking clone	N	clone Viking tag to T55x7 or Q5/T5555
lf viking sim	N	simulate Viking tag

lf visa2000

{ Visa2000 RFIDs... }

command	offline	description
lf visa2000 help	Y	This help
lf visa2000 demod	Y	demodulate an VISA2000 tag from the GraphBuffer
lf visa2000 reader	N	attempt to read and extract tag data from the antenna
lf visa2000 clone	N	clone Visa2000 tag to T55x7 or Q5/T5555
lf visa2000 sim	N	simulate Visa2000 tag

mem

{ Flash memory manipulation... }

command	offline	description
mem help	Y	This help
mem baudrate	N	Set Flash memory Spi baudrate
mem spiffs	N	High level SPI FileSystem Flash manipulation
mem info	N	Flash memory information
mem load	N	Load data into flash memory
mem dump	N	Dump data from flash memory
mem wipe	N	Wipe data from flash memory

reveng

{ CRC calculations from RevEng software... }

[=] reveng: no mode switch specified. Use reveng -h for help.

smart

{ Smart card ISO-7816 commands... }

command	offline	description
smart help	Y	This help
smart list	N	List ISO 7816 history
smart info	N	Tag information
smart reader	N	Act like an IS07816 reader
smart raw	N	Send raw hex data to tag
smart upgrade	Y	Upgrade sim module firmware
smart setclock	N	Set clock speed
smart brute	N	Bruteforce SFI

script

{ Scripting commands... }

command	offline	description
script help	Y	Usage info
script list	Y	List available scripts
script run	Y	<name> -- execute a script

trace

{ Trace manipulation... }

command	offline	description
trace help	Y	This help
trace list	Y	List protocol data in trace buffer
trace load	Y	Load trace from file
trace save	Y	Save trace buffer to file

usart

{ USART commands... }

command	offline	description
usart help	Y	This help
usart btpin	N	Change BT add-on PIN
usart btfactory	N	Reset BT add-on to factory settings
usart tx	N	Send string over USART
usart rx	N	Receive string over USART
usart txrx	N	Send string over USART and wait for response
usart txhex	N	Send bytes over USART
usart rxhex	N	Receive bytes over USART
usart config	N	Configure USART

wiegand

{ Wiegand format manipulation... }

command	offline	description
wiegand help	Y	This help
wiegand list	Y	List available wiegand formats
wiegand encode	Y	Encode to wiegand raw hex
wiegand decode	Y	Convert raw hex to decoded wiegand format