Building on Windows

You will need to use the Gator96100 Proxspace package to assist in your windows installation. This can be downloaded from https://github.com/Gator96100/ProxSpace/

Video Installation guide

Manual Installation

Driver Installation

Install required drivers for your windows installation. You will may need admin privileges to do this. (This is covered in the video) Step by step guides are online such as RiscCorps

Install Github

Install Github for Windows https://desktop.github.com/

Download / clone Proxspace repo

Download the required proxspace repo. https://github.com/Gator96100/ProxSpace/

Extract 'ProxSpace' to a location on drive without spaces. For example D:\OneDrive\Documents\GitHub is ok whereas C:\My Documents\My Projects\proxspace is not.

Clone the RRG/Iceman repository

git clone https://github.com/RfidResearchGroup/proxmark3.git

Copy files to Proxspace

Copy all the contents from the proxmark3 folder into the proxspace pm3 folder

Run the .bat

Run runme.bat or runme64.bat depending on your Windows architecture.

Please note you will need to use / as you are using BASH.

Compile and use the project

Now you're ready to follow the compilation instructions.

The only differences are that executables end with .exe (e.g. client/flasher.exe) and that the Proxmark3 port is one of your comX ports where "X" is the com port number assigned to proxmark3 under Windows.

So flashing will resemble

client/flasher.exe comX -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf

And running the client will resemble

cd client
./proxmark3.exe comX

2 KiB Raw Blame History