proxmark3/include/usb_cmd.h
2013-02-28 17:04:23 +00:00

172 lines
9.1 KiB
C

//-----------------------------------------------------------------------------
// Jonathan Westhues, Mar 2006
// Edits by Gerhard de Koning Gans, Sep 2007
//
// This code is licensed to you under the terms of the GNU GPL, version 2 or,
// at your option, any later version. See the LICENSE.txt file for the text of
// the license.
//-----------------------------------------------------------------------------
// Definitions for all the types of commands that may be sent over USB; our
// own protocol.
//-----------------------------------------------------------------------------
#ifndef __USB_CMD_H
#define __USB_CMD_H
#ifdef _MSC_VER
typedef DWORD uint32_t;
typedef BYTE uint8_t;
#define PACKED
// stuff
#else
#include <stdint.h>
#include <stdbool.h>
#define PACKED __attribute__((packed))
#endif
#define USB_CMD_DATA_SIZE 512
typedef struct {
uint64_t cmd;
uint64_t arg[3];
union {
uint8_t asBytes[USB_CMD_DATA_SIZE];
uint32_t asDwords[USB_CMD_DATA_SIZE/4];
} d;
} PACKED UsbCommand;
// For the bootloader
#define CMD_DEVICE_INFO 0x0000
#define CMD_SETUP_WRITE 0x0001
#define CMD_FINISH_WRITE 0x0003
#define CMD_HARDWARE_RESET 0x0004
#define CMD_START_FLASH 0x0005
#define CMD_NACK 0x00fe
#define CMD_ACK 0x00ff
// For general mucking around
#define CMD_DEBUG_PRINT_STRING 0x0100
#define CMD_DEBUG_PRINT_INTEGERS 0x0101
#define CMD_DEBUG_PRINT_BYTES 0x0102
#define CMD_LCD_RESET 0x0103
#define CMD_LCD 0x0104
#define CMD_BUFF_CLEAR 0x0105
#define CMD_READ_MEM 0x0106
#define CMD_VERSION 0x0107
// For low-frequency tags
#define CMD_READ_TI_TYPE 0x0202
#define CMD_WRITE_TI_TYPE 0x0203
#define CMD_DOWNLOADED_RAW_BITS_TI_TYPE 0x0204
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0205
#define CMD_MOD_THEN_ACQUIRE_RAW_ADC_SAMPLES_125K 0x0206
#define CMD_DOWNLOAD_RAW_ADC_SAMPLES_125K 0x0207
#define CMD_DOWNLOADED_RAW_ADC_SAMPLES_125K 0x0208
#define CMD_DOWNLOADED_SIM_SAMPLES_125K 0x0209
#define CMD_SIMULATE_TAG_125K 0x020A
#define CMD_HID_DEMOD_FSK 0x020B
#define CMD_HID_SIM_TAG 0x020C
#define CMD_SET_LF_DIVISOR 0x020D
#define CMD_LF_SIMULATE_BIDIR 0x020E
#define CMD_SET_ADC_MUX 0x020F
#define CMD_HID_CLONE_TAG 0x0210
#define CMD_EM410X_WRITE_TAG 0x0211
#define CMD_INDALA_CLONE_TAG 0x0212
// for 224 bits UID
#define CMD_INDALA_CLONE_TAG_L 0x0213
#define CMD_T55XX_READ_BLOCK 0x0214
#define CMD_T55XX_WRITE_BLOCK 0x0215
#define CMD_T55XX_READ_TRACE 0x0216
#define CMD_PCF7931_READ 0x0217
#define CMD_EM4X_READ_WORD 0x0218
#define CMD_EM4X_WRITE_WORD 0x0219
/* CMD_SET_ADC_MUX: ext1 is 0 for lopkd, 1 for loraw, 2 for hipkd, 3 for hiraw */
// For the 13.56 MHz tags
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_15693 0x0300
#define CMD_ACQUIRE_RAW_ADC_SAMPLES_ISO_14443 0x0301
#define CMD_READ_SRI512_TAG 0x0303
#define CMD_READ_SRIX4K_TAG 0x0304
#define CMD_READER_ISO_15693 0x0310
#define CMD_SIMTAG_ISO_15693 0x0311
#define CMD_RECORD_RAW_ADC_SAMPLES_ISO_15693 0x0312
#define CMD_ISO_15693_COMMAND 0x0313
#define CMD_ISO_15693_COMMAND_DONE 0x0314
#define CMD_ISO_15693_FIND_AFI 0x0315
#define CMD_ISO_15693_DEBUG 0x0316
// For Hitag2 transponders
#define CMD_SNOOP_HITAG 0x0370
#define CMD_SIMULATE_HITAG 0x0371
#define CMD_READER_HITAG 0x0372
#define CMD_SIMULATE_TAG_HF_LISTEN 0x0380
#define CMD_SIMULATE_TAG_ISO_14443 0x0381
#define CMD_SNOOP_ISO_14443 0x0382
#define CMD_SNOOP_ISO_14443a 0x0383
#define CMD_SIMULATE_TAG_ISO_14443a 0x0384
#define CMD_READER_ISO_14443a 0x0385
#define CMD_SIMULATE_TAG_LEGIC_RF 0x0387
#define CMD_READER_LEGIC_RF 0x0388
#define CMD_WRITER_LEGIC_RF 0x0389
#define CMD_EPA_PACE_COLLECT_NONCE 0x038A
#define CMD_SNOOP_ICLASS 0x0392
#define CMD_SIMULATE_TAG_ICLASS 0x0393
#define CMD_READER_ICLASS 0x0394
// For measurements of the antenna tuning
#define CMD_MEASURE_ANTENNA_TUNING 0x0400
#define CMD_MEASURE_ANTENNA_TUNING_HF 0x0401
#define CMD_MEASURED_ANTENNA_TUNING 0x0410
#define CMD_LISTEN_READER_FIELD 0x0420
// For direct FPGA control
#define CMD_FPGA_MAJOR_MODE_OFF 0x0500
// For mifare commands
#define CMD_MIFARE_SET_DBGMODE 0x0600
#define CMD_MIFARE_EML_MEMCLR 0x0601
#define CMD_MIFARE_EML_MEMSET 0x0602
#define CMD_MIFARE_EML_MEMGET 0x0603
#define CMD_MIFARE_EML_CARDLOAD 0x0604
#define CMD_MIFARE_EML_CSETBLOCK 0x0605
#define CMD_MIFARE_EML_CGETBLOCK 0x0606
#define CMD_SIMULATE_MIFARE_CARD 0x0610
#define CMD_READER_MIFARE 0x0611
#define CMD_MIFARE_NESTED 0x0612
#define CMD_MIFARE_READBL 0x0620
#define CMD_MIFARE_READSC 0x0621
#define CMD_MIFARE_WRITEBL 0x0622
#define CMD_MIFARE_CHKKEYS 0x0623
#define CMD_MIFARE_SNIFFER 0x0630
#define CMD_UNKNOWN 0xFFFF
// CMD_DEVICE_INFO response packet has flags in arg[0], flag definitions:
/* Whether a bootloader that understands the common_area is present */
#define DEVICE_INFO_FLAG_BOOTROM_PRESENT (1<<0)
/* Whether a osimage that understands the common_area is present */
#define DEVICE_INFO_FLAG_OSIMAGE_PRESENT (1<<1)
/* Set if the bootloader is currently executing */
#define DEVICE_INFO_FLAG_CURRENT_MODE_BOOTROM (1<<2)
/* Set if the OS is currently executing */
#define DEVICE_INFO_FLAG_CURRENT_MODE_OS (1<<3)
/* Set if this device understands the extend start flash command */
#define DEVICE_INFO_FLAG_UNDERSTANDS_START_FLASH (1<<4)
/* CMD_START_FLASH may have three arguments: start of area to flash,
end of area to flash, optional magic.
The bootrom will not allow to overwrite itself unless this magic
is given as third parameter */
#define START_FLASH_MAGIC 0x54494f44 // 'DOIT'
#endif