mirror of
https://github.com/RfidResearchGroup/proxmark3.git
synced 2024-11-15 14:20:51 +08:00
181 lines
6.3 KiB
Markdown
181 lines
6.3 KiB
Markdown
Proxmark3 RDV40 dedicated repo, based on iceman fork
|
|
===============
|
|
[](https://github.com/RfidResearchGroup/proxmark3/releases/latest)
|
|
|
|
## Notice
|
|
This repo is based on iceman fork for proxmark3. It is dedicated to bring the most out of the new features for proxmark3 RDV40 device.
|
|
|
|
## Coverity Scan Config & Run
|
|
Download the Coverity Scan Self-buld and install it.
|
|
You will need to configure ARM-NON-EABI- Compiler for it to use:
|
|
|
|
- Configure
|
|
|
|
`cov-configure --comptype gcc --compiler /opt/devkitpro/devkitARM/bin/arm-none-eabi-gcc`
|
|
|
|
- Run it (I'm running on Ubuntu)
|
|
|
|
`cov-build --dir cov-int make all`
|
|
|
|
- Make a tarball
|
|
|
|
`tar czvf proxmark3.tgz cov-int`
|
|
|
|
- Upload it to coverity.com
|
|
|
|
|
|
## Whats changed?
|
|
* added flash memory 256kb.
|
|
* added smart card module
|
|
* added FPC connector
|
|
|
|
---
|
|
## Why didn't you based it on offical PM3 Master?
|
|
The separation from offical pm3 repo gives us very much freedom to create a firmware/client that suits the RDV40 features. We don't want to mess up the offical pm3 repo with RDV40 specific code.
|
|
|
|
## Why don't you add this or that functionality?
|
|
Give us a hint, and we'll see if we can't merge in the stuff you have.
|
|
|
|
## PM3 GUI
|
|
The official PM3-GUI from Gaucho will not work.
|
|
The new universial GUI will work.
|
|
|
|
## Development
|
|
This fork now compiles just fine on
|
|
- Windows/mingw environment with Qt5.6.1 & GCC 4.8
|
|
- Ubuntu 1404, 1510, 1604
|
|
- Mac OS X / Homebrew
|
|
- Docker container
|
|
|
|
## KALI and ARCHLINUX users
|
|
Kali and ArchLinux users usually must kill their modem manager in order for the proxmark3 to enumerate properly.
|
|
|
|
## Setup and build for UBUNTU
|
|
GC made updates to allow this to build easily on Ubuntu 14.04.2 LTS, 15.10 or 16.04
|
|
See https://github.com/Proxmark/proxmark3/wiki/Ubuntu%20Linux
|
|
|
|
A nice and cool install script made by @daveio is found here:
|
|
https://github.com/daveio/attacksurface/blob/master/proxmark3/pm3-setup.sh
|
|
I have also added this script to the fork.
|
|
https://github.com/RfidResearchGroup/proxmark3/blob/master/install.sh
|
|
|
|
- Run
|
|
`sudo apt-get install p7zip git build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config wget libncurses5-dev gcc-arm-none-eabi libjansson-dev`
|
|
|
|
- Clone fork
|
|
`git clone https://github.com/RfidResearchGroup/proxmark3.git`
|
|
|
|
- Get the latest commits
|
|
`git pull`
|
|
|
|
- Install the blacklist rules and add user to dialout group (if you on a Linux/ubuntu/debian). If you do this one, you need to logout and login in again to make sure your rights got changed.
|
|
`make udev`
|
|
|
|
- Clean and complete compilation
|
|
`make clean && make all`
|
|
|
|
- Flash the BOOTROM & FULLIMAGE
|
|
`client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf`
|
|
|
|
- Change into the client folder
|
|
`cd client`
|
|
|
|
- Run the client
|
|
`./proxmark3 /dev/ttyACM0`
|
|
|
|
## Setup and build for ArchLinux
|
|
- Run
|
|
`sudo pacman -Sy base-devel p7zip libusb readline ncurses libjansson-dev arm-none-eabi-newlib --needed`
|
|
`yaourt -S termcap`
|
|
|
|
- Clone fork
|
|
`git clone https://github.com/RfidResearchGroup/proxmark3.git`
|
|
|
|
- Get the latest commits
|
|
`git pull`
|
|
|
|
- Install the blacklist rules and add user to dialout group (if you on a Linux/ubuntu/debian). If you do this one, you need to logout and login in again to make sure your rights got changed.
|
|
`make udev`
|
|
|
|
- Clean and complete compilation
|
|
`make clean && make all`
|
|
|
|
- Flash the BOOTROM & FULLIMAGE
|
|
`client/flasher /dev/ttyACM0 -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf`
|
|
|
|
- Change into the client folder
|
|
`cd client`
|
|
|
|
- Run the client
|
|
`./proxmark3 /dev/ttyACM0`
|
|
|
|
## Homebrew (Mac OS X)
|
|
These instructions comes from @Chrisfu, where I got the proxmark3.rb scriptfile from.
|
|
Further questions about Mac & Homebrew, contact @Chrisfu (https://github.com/chrisfu/)
|
|
|
|
1. Install homebrew if you haven't yet already done so: http://brew.sh/
|
|
|
|
2. Tap this repo: `brew tap RfidResearchGroup/proxmark3`
|
|
|
|
3. Install Proxmark3: `brew install proxmark3` for stable release or `brew install --HEAD proxmark3` for latest non-stable from GitHub.
|
|
|
|
Upgrading HomeBrew tap formula
|
|
-----------------------------
|
|
*This method is useful for those looking to run bleeding-edge versions of iceman's client. Keep this in mind when attempting to update your HomeBrew tap formula as this procedure could easily cause a build to break if an update is unstable on macOS.*
|
|
|
|
Tested on macOS High Sierra 10.13.2
|
|
|
|
*Note: This assumes you have already installed iceman's fork from HomeBrew as mentioned above*
|
|
|
|
1. Force HomeBrew to pull the latest source from github
|
|
`brew upgrade --fetch-HEAD RfidResearchGroup/proxmark3`
|
|
|
|
2. Flash the bootloader & fullimage.elf
|
|
* With your Proxmark3 unplugged from your machine, press and hold the button on your Proxmark 3 as you plug it into a USB port. Continue to hold the button until after this step is complete and the `proxmark3-flasher` command outputs "Have a nice day!"*
|
|
`$ sudo proxmark3-flasher /dev/tty.usbmodem881 -b /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/bootrom.elf /usr/local/Cellar/proxmark3/HEAD-6a710ef/share/firmware/fullimage.elf`
|
|
|
|
|
|
`$ sudo proxmark3-flasher /dev/tty.usbmodem881 `
|
|
|
|
4. Enjoy the update
|
|
|
|
|
|
## Building on Windows
|
|
|
|
### Gator96100 distro
|
|
Rather than download and install every one of these packages, a new ProxSpace
|
|
environment archive file will be made available for download on the project
|
|
page at @Gator96100's repo
|
|
|
|
Afterwards just clone the iceman repo or download someone elses.
|
|
Read instructions on @Gator96100 repo page. (https://github.com/Gator96100/ProxSpace/)
|
|
|
|
Links
|
|
- https://github.com/Gator96100/ProxSpace/releases/tag/v3.1 (release v3.1 with gcc v7.3.0 )
|
|
- https://github.com/Gator96100/ProxSpace/releases/tag/v2.2 (release v2.2 with gcc v5.3.0 arm-none-eabi-gcc v7.1.0)
|
|
|
|
|
|
### 7. Build and run
|
|
|
|
- Clone fork
|
|
`git clone https://github.com/RfidResearchGroup/proxmark3.git`
|
|
|
|
- Get the latest commits
|
|
`git pull`
|
|
|
|
- CLEAN COMPILE
|
|
`make clean && make all`
|
|
|
|
Assuming you have Proxmark3 Windows drivers installed you can run the Proxmark software where "X" is the com port number assigned to proxmark3 under Windows.
|
|
|
|
- Flash the BOOTROM & FULLIMAGE
|
|
`client/flasher.exe comX -b bootrom/obj/bootrom.elf armsrc/obj/fullimage.elf`
|
|
|
|
- Change into the client folder
|
|
`cd client`
|
|
|
|
- Run the client
|
|
`proxmark3.exe comX`
|
|
|
|
iceman at host iuse.se
|
|
July 2018, Sweden
|